Synthesis, Purification and Characterization of Amphiphilic and Microphase Separated Graft Copolymer Polystyrene-g-Poly(ethylene oxide)

The present paper covers the poly (ethylene oxide) macromer with vinyl benzyl terminal group (PEO-VB) prepared by deactivation of the alkoxide function of mono-functional "living" PEO chains with vinyl benzyl chloride (VBC). The obtained macromers were subjected to careful purification and detailed characterization. A new kind of amphiphilic polystyrene-g-poly(ethylene oxide) (PS-g-PEO) with both mi-crophase separated and PEO side chains was synthesized from radical copolymerization of PEO-VB macromer with styrene monomer. An improved purification method, referred as "selective dissolvation", was established for the isolation of graft copolymers from the grafting products, and the purity and yield of the purified copolymers were satisfactory. The well-defined structure of the purified copolymers was confirmed by IR, 1H NMR and GPC. The bulk composition of the graft copolymers was determined by a well-established first derivative UV spectrometry. Various experimental parameters controlling the copolymeri     

Polystyrene‐graft‐poly(ethylene oxide) copolymers prepared by macromonomer technique in dispersion. I. Liquid chromatographic separation of product mixtures

Products of the radical dispersion copolymerization of methacryloyl‐terminated poly(ethylene oxide) (PEO) macromonomer and styrene were separated and characterized by size exclusion chromatography (SEC), full adsorption‐desorption (FAD)/SEC coupling and eluent gradient liquid adsorption chromatography (LAC). In dimethylformamide, which is a good solvent for PEO side chains but a poor solvent for polystyrene (PS), amphiphilic PS‐graft‐PEO copolymers formed aggregates, which were very stable at room temperature even upon substantial dilution. The aggregates disappeared at high temperature or in tetrahydrofuran (THF), which is a good solvent for both homopolymers and for PS‐graft‐PEO. FAD/SEC procedure allowed separation of homo‐PS from graft‐copolymer and determination of both its amount and molar mass. Effective molar mass of graft‐copolymer was estimated directly from the SEC calibration curve determined with PS standards. Presence of larger amount of the homo‐PS in the final graft‐copolymer products was also confirmed with LAC measurements. The results indicate that there are at least two or maybe three polymerization loci; namely the continuous phase, the particle surface layer and the particle core. The graft copolymers are produced mainly in the continuous phase while PS or copolymer rich in styrene units is formed mostly in the core of monomer‐swollen particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2284–2291, 2000     

含氟两亲接枝共聚物的制备及其与牛血清蛋白作用的研究

用端基反应法合成了对乙烯基苄基的聚乙二醇大分子单体,将该大分子单体与甲基丙烯酸六氟丁酯共聚,合成了一种含氟两亲接枝共聚物.利用1H-NMR1、9F-NMR、GPC对大分子单体和两亲接枝共聚物进行了表征.表面张力法测定了两亲接枝共聚物的临界胶束浓度,发现随着共聚物中含氟链段含量的增加,其临界胶束浓度降低.采用荧光光谱研究了含氟两亲接枝共聚物与牛血清蛋白(BSA)的相互作用,结果表明由于含氟链段疏水力的作用,含氟两亲接枝共聚物能与牛血清蛋白发生相互作用使其荧光增强,随着含氟两亲接枝共聚物浓度和共聚物中含氟链段含量的增加,荧光增强幅度加大.通过透射电子显微镜(TEM)和激光光散射粒度仪(PCS)测试发现,当BSA加入到含氟两亲接枝共聚物的胶束溶液后,所得胶束的粒径和粒径分布变大,共聚物胶束由规整的实心核壳结构变为囊泡状核壳结构.     

Dispersion copolymerization of polyoxyethylene macronomer and styrene 4. Solution properties of polystyrene-graft-polyoxyethylene copolymers

The graft copolymers (polystyrene-graft-polyoxyethylene) (PSt-graft-PEO) were prepared by the radical dispersion copolymerization of methacryloyl (MA)-terminated PEO macromonomer and styrene. By means of size-exclusion chromatography, liquid chromatography at the critical adsorption point, and light scattering, the molecular weight parameters and the solution properties of PSt-graft-PEO were investigated. The apparent average molecular weight and the molecular weight distribution (MWD) of graft copolymers were found to decrease with increasing molecular weight of PEO-MA macromonomer. This decreased molecular weight was attributed to the chain transfer to PEO unit and increased contribution of the solution polymerization. The broad MWD varied with the ratio of the polymerization in the continuous phase and the polymer particles. The number of PEO grafts per PSt backbone decreased with increasing molecular weight of the PSt-graft-PEO copolymer, which was attributed to the intramolecular association of PEO segments. The intrinsic viscosity or the coil size of graft copolymer molecules varied with temperature as a result of the dehydration of PEO segments. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3087–3097, 1999     

阴离子型含氟两亲接枝共聚物的合成及其胶束化行为研究

以聚乙二醇甲醚甲基丙烯酸酯(MPEGMA)为大分子单体,甲基丙烯酸六氟丁酯(HFMA)、对苯乙烯磺酸钠(NaSS)为共聚单体,采用大分子单体接枝共聚法,制备了一种阴离子型含氟两亲接枝共聚物P( HFMA-co-NaSS) -g-PEG.利用FTIR、1H-NMR和19F-NMR对共聚物的分子结构进行了表征.表面张力法测...     

Controlled synthesis and interface properties of new amphiphilic PCL-g-PEO copolymers

Novel biodegradable and biocompatible poly(epsilon-caprolactone)-graft-poly(ethylene oxide), PCL-g-PEO, copolymers consisting of biocompatible blocks have been synthesized by ring-opening copolymerization of epsilon-caprolactone (epsilon CL) and a poly(ethylene oxide) (PEO) macromonomer, i.e., PEO end-capped by an epsilon-caprolactone unit (gamma PEO.CL). The control is effective on the composition and length of both the hydrophobic polyester backbone and the hydrophilic PEO grafts. The reactivity ratios have been determined by monitoring the copolymer composition in relation to the comonomer conversion. The PCL-g-PEO copolymers have a tapered (gradient) rather than a random structure consistent with r(epsilon)CL = 3.95 and r(gamma)PEO.CL = 0.05. The amphiphilic graft copolymers display surfactant properties similar to those of PEO-b-PCL diblock copolymers of comparable composition and solubility, as supported by CHCl3/water interfacial tension measured by the pendant drop method.     

Highly branched polyethylene graft copolymers prepared by means of migratory insertion polymerization combined with TEMPO‐mediated controlled radical polymerization

New families of highly branched polyethylenes containing alkyl short chain branches as well as polar and non‐polar long‐chain branches were prepared by combining migratory insertion copolymerization with controlled radical graft copolymerization. Key intermediate was a novel alkoxyamine‐functionalized 1‐alkene which was copolymerized with ethylene using a palladium catalyst. The resulting highly branched polyethylene with alkoxyamine‐functionalized short chain branches was used as macroinitiator to initiate controlled radical graft copolymerization of styrene and styrene/acrylonitrile. Novel polyethylene graft copolymers with molecular masses of M_w >100 000 g/mol and narrow polydispersities were obtained. Transmission electron microscopic studies (TEM) and the presence of two glass transition temperatures at –67 and +100°C indicated microphase separation.     

Amphiphilic graft copolymers - preparation and interfacial properties

Amphiphilic graft copolymers containing poly(ethylene oxide) (PEO) grafts have been prepared by various methods, for example, by coupling of reactive hydrophobic backbone polymers with end-functionalised PEO, by macromonomer copolymerisation, and by anionic graft polymerisation of EO onto polymer backbones carrying functional groups as initiator precursors. The graft copolymers are amphiphilic and were shown to accumulate at surfaces and interfaces in solution and in the solid state. Amphiphilic starch derivatives were prepared by reaction of amylose and starch with aliphatic α-epoxides.     

Copolymerization of poly(propylene oxide) methacrylate macromonomer with styrene

Graft copolymers of styrene and poly(propylene oxide) were prepared by reaction between styrene and a poly(propylene oxide) methacrylate macromonomer. The graft copolymers were characterized by i.r., GPC and ¹H-NMR and mechanical properties were examined. The effect of zinc chloride on the copolymerization was evaluated. The results showed a decrease in the incorporation of macromonomer in the graft copolymer when zinc chloride was added to the system. This effect has been attributed to interaction among chains of poly(propylene oxide) and the zinc chloride.     

聚环氧乙烷为支链的两亲共聚物的表征及性能

用端基带有甲基丙烯酸酯的聚环氧乙烷大分子单体（ＰＥＯ—ＭＡ）分别与小分子单体苯乙烯（Ｓ）、甲基丙烯酸甲酯（ＭＭＡ）、丙烯酸甲酯（ＭＡ）溶液自由基共聚合得到了三种具有不同主链结构的以聚环氧乙烷（ＰＥＯ）为支链的两亲接枝嵌段共聚物（分别简写为：ＰＳ─ｇ─ＰＥＯ，ＰＭＭＡ─ｇ─ＰＥＯ，ＰＭＡ─ｇ─ＰＥＯ）．用ＧＰＣ、ＩＲ、１Ｈ─ＮＭＲ、ＷＡＸＤ和ＤＳＣ对其结构进行了表征．研究了接校共聚物的结晶性能、乳化性能以及在Ｗｉｌｌｉａｍｓｏｎ反应中相转移催化作用．结果表明，不同主链结构有不同的结晶度，并随支链ＰＥＯ含量的增加，分子量的增大而提高；其乳化体积和相转移催化反应的转化率均随着共聚物浓度的增加、支链ＰＥＯ含量的增人而增大，随支链ＰＥＯ分子量的提高而减小．     

Amphiphilic polymer gel electrolytes. I. preparation of gels based on poly(ethylene oxide) graft copolymers containing different ionophobic groups

Amphiphilic graft copolymers were prepared via the radical copolymerization of poly(ethylene oxide) (PEO) macromonomers with fluorocarbon or hydrocarbon acrylates in toluene with 2,2′‐azobisisobutyronitrile (AIBN) as an initiator. ¹H NMR spectroscopy confirmed that the composition of the graft copolymers corresponded well to the monomer feed. For gel electrolytes prepared from the amphiphilic copolymers, the nature of the ionophobic parts of the amphiphilic graft copolymers had a great influence on the ion conductivity. Gel electrolytes based on graft copolymers containing fluorocarbon side chains showed significantly higher ion conductivity than electrolytes based on graft copolymers containing hydrocarbon groups. The ambient‐temperature ion conductivity was about 2.6 mS/cm at 20 °C for a gel electrolyte based on an amphiphilic graft copolymer consisting of an acrylate backbone carrying PEO and fluorocarbon side chains. Corresponding gels based on graft copolymers with PEO side chains and hydrocarbon groups showed an ambient‐temperature ion conductivity of about 1.2 mS/cm. The gel electrolytes contained 30 wt % copolymer and 70 wt % 1 M LiPF₆ in an ethylene carbonate/γ‐butyrolactone (2/1 w/w) mixture. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2223–2232, 2001     

Facile synthesis of graft copolymers containing rigid poly(dialkyl fumarate) branches by macromonomer method

Graft copolymers show microphase separated structure as seen in block copolymers and have lower intrinsic viscosity than block copolymers because of a branching structure. Therefore, considering molding processability, especially for polymers containing rigid segments, graft copolymers are useful architectures. In this work, graft copolymers containing rigid poly(diisopropyl fumarate) (PDiPF) branches were synthesized by full free‐radical polymerization process. First, synthesis of PDiPF macromonomers by addition‐fragmentation chain transfer (AFCT) was investigated. 2,2‐Dimethyl‐4‐methylene‐pentanedioic acid dimethyl ester was found to be an efficient AFCT agent for diisopropyl fumarate (DiPF) polymerization because of the suppression of undesired primary radical termination, which significantly took place when common AFCT agent, methyl 2‐(bromomethyl)acrylate, was used. Copolymerization of PDiPF macromonomer with ethyl acrylate accomplished the generation of the graft copolymer having flexible poly(ethyl acrylate) backbone and rigid PDiPF branches. The graft copolymer showed a microphase separated structure, high transparency, and characteristic thermal properties to PDiPF and poly(ethyl acrylate). © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2474–2480     

Preparation and properties of alkylated poly(styrene-graft-ethylene oxide)

Poly(styrene-graft-ethylene oxide), having alkyl chains (C₁₂ or C₁₈) on the polystyrene main chain or on the poly(ethylene oxide) (PEO) side chains, were synthesized. The main chain was alkylated by first ionizing amide groups in a styrene/acrylamide copolymer with tert-butoxide, and then using the amide anions as sites for reactions with 1-bromoalkanes. An excess of amide anions was used in the reaction, and the remaining anions were subsequently utilized as initiator sites for the anionic polymerization of ethylene oxide (EO). Synthesis of poly(styrene-graft-ethylene oxide) with alkylated side chains was accomplished by polymerization of EO onto the ionized styrene/acrylamide copolymer, followed by an alkylation of the terminal alkoxide anions with 1-bromoalkanes. The alkylated graft copolymers were structurally characterized by using elemental analysis, ¹H NMR, GPC, and IR spectroscopy. DSC analysis showed that only graft copolymers with PEO contents exceeding about 50 wt % and side chain crystallinities comparable to those of homo-PEO. Main chain alkylated graft copolymers generally had higher crystalinities, as compared to nonalkylated and side chain alkylated samples. The graft copolymers absorbed water corresponding to one water molecule per EO unit at low PEO contents. The water absorption increased progressively at PEO contents above 30 wt % for main chain alkylated samples and above 50 wt % for non-alkylated samples. © 1995 John Wiley & Sons, Inc.     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006     

Synthesis and properties of fluorine‐containing amphiphilic graft copolymer P(HFMA)‐g‐P(SPEG)

A series of amphiphilic graft copolymers P(HFMA)‐g‐P(SPEG) comprising poly(hexafluorobutyl methacrylate) (PHFMA) backbones and poly(ethylene glycol) (PEG) side chains were synthesized by copolymerization of HFMA and SPEG macromonomer with the p‐vinylbenzyl end group. The SPEG macromonomer was synthesized by reacting Methoxy poly(ethylene glycol) (MPEG) with p‐chloromethylstyrene in THF in the presence of NaH. The macromonomer and amphiphilic graft copolymer were characterized by FTIR, ¹H NMR, ¹⁹F NMR, and gel permeation chromatography (GPC). The critical micelle concentration (CMC) of the amphiphilic graft copolymer was measured by surface tension technique. The results showed that the CMC decreased with increasing HFMA contents in the graft copolymers. The interaction between P(HFMA)‐g‐P(SPEG) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy, transmission electron microscopy (TEM), and photon correlation spectroscopy (PCS). The fluorescence spectrum showed that the fluorescence intensity of BSA increased with increasing content of HFMA in P(HFMA)‐g‐P(SPEG) and concentration of P(HFMA)‐g‐P(SPEG) in the P(HFMA)‐g‐P(SPEG)/BSA solution. TEM micrographs showed that P(HFMA)‐g‐P(SPEG) mainly formed core‐shell structure micelles. When BSA was added, the micelles changed from a core‐shell structure into a worm‐like, vesicle‐like and hollow‐like structure with different initial concentrations of the copolymer. The size distribution of the micelles increased proving that the copolymer micelles encapsulated the bovine serum albumin. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4895–4907, 2009     

Self‐emulsification and surface modification effect of fluorinated amphiphilic acrylate graft copolymers

We report on self‐emulsification and surface modification effect of novel fluorinated amphiphilic graft copolymers prepared with perfluoroalkyl acrylate and 2‐dimethylaminoethyl methacrylate using simple macromonomer technique and radical copolymerization. The interfacial properties of amphiphilic graft copolymers were characterized with light scattering, contact angle measurement, and X‐ray photoelectron spectroscopy. The preparation of fluorinated amphiphilic graft copolymer was verified using nuclear magnetic resonance and Fourier transform infrared spectroscopy. It was observed that the fluorinated amphiphilic graft copolymer has both strong hydrophobic and hydrophilic properties and shows self‐emulsification ability without addition of external surfactants. The graft copolymer shows very low surface energy even though the copolymer has low content of hydrophobic segment and better performance than random copolymer for low‐energy surface modification. The addition of small amount of the graft copolymer (0.1 wt %) into the base poly(methyl methacrylate) was sufficient to lower the surface energy less than that of poly(tetrafluoroethylene). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of dendronized polymer brushes containing metallo‐supramolecular polymer side chains

A new kind of dendronized polymer brush with metallo‐supramolecular polymer side chains was fabricated by a combination of macromonomer and graft‐to approach. The alternating copolymers of maleic anhydride and styryl macromonomers pendant with Fréchet‐type dendrons of three generations were reported previously. In this article, terpyridine groups were introduced along the backbone of the dendronized polymers through the amidolysis of anhydride groups. The terpyridine functionalized PEO linear chains were then incorporated through the complexation of terpyridine and Ru(II) ion. Thus, dendronized polymer brushes with amphiphilic properties were synthesized. AFM analysis showed worm‐like single molecular morphologies of the polymers of three generations, and ¹H NMR analysis indicated that such molecular brushes had an amphiphilic nature in solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3303–3310, 2007     

含氟两亲接枝共聚物的制备及其结晶行为

采用大分子单体技术合成了一系列以聚乙二醇为支链、甲基丙烯酸六氟丁酯为主链的含氟两亲接枝共聚物(PHFMA-g-PSPEG)。用1HNMR和凝胶色谱(GPC)对制备的大分子单体和两亲接枝共聚物的结构进行了表征。利用示差扫描量热法(DSC)、X射线衍射(XRD)和偏光显微镜(POM)测试技术对含氟两亲接枝共聚物的结晶行为进行了研究。DSC和XRD结果表明,随着共聚物中含氟链段质量分数的增加,其结晶温度(Tc)和结晶度(Xc)均降低,而结晶熔融温度(Tm)先减小后增加。POM发现,随着共聚物中含氟链段质量分数的增加,其结晶速度减慢,共聚物形成清晰球晶的能力减弱,当共聚物中含氟链段质量分数为57%时,含氟两亲接枝共聚物已不能形成清晰的球晶。     

两亲接枝共聚物PS-g-N-PEO的合成及表面性能研究——铸膜溶剂及浓度的影响

采用大分子单体法合成了一系列聚苯乙烯接枝壬基酚聚氧乙烯 (PS g NPEO)两亲共聚物 ,采用溶液铸膜法将其在PET表面制膜 ,并利用扫描电子显微镜 (SEM) ,X射线光电子能谱 (XPS) ,衰减全反射红外光谱(ATR)和水接触角 (CA)等手段研究了共聚物组成、铸膜溶剂及浓度对共聚物膜表面形貌、组成及水浸润性能的影响 .结果表明 ,两亲接枝共聚物在不同条件下可形成规则的表面微孔 ,共聚物中NPEO含量越高 ,共聚物膜表面微孔孔径越大 ,对应的水接触角越小 .以THF为铸膜溶剂时 ,制膜浓度越大 ,共聚物膜表面微孔孔径越大 ,对应的水接触角越小 ;而以甲苯为溶剂时 ,制膜浓度对共聚物膜表面形貌影响不大 ,但水接触角要较THF体系显著降低 ,水接触角与浓度关系与THF体系相反 ,制膜浓度越大 ,对应的水接触角越大 .制膜浓度相同时 ,THF作溶剂 ,共聚物膜微孔较大 ,表面亲水组分含量较低 ;以甲苯为溶剂 ,微孔较密 ,表面亲水组分较高 .     

EFFECTS OF SOLVENT TREATMENT ON SURFACE MORPHOLOGY AND COMPOSITION OF POLY(METHYL METHACRYLATE)-g-POLY(ETHYLENE OXIDE)

Surface morphology and composition of solution-cast films of poly(methyl methacrylate)-g-poly(ethylene oxide)(PMMA-g-PEO) were investigated by using XPS, DSC, SEM and contact angle measurement. The microphase separatedstructure of the copolymers was studied by TEM. Generally, for the same graft copolymer, the surface content of PEO orhydrophilicity can be as follows: Surface treated with petroleum ether or cyclohexane>surface untreated with solvent>surface treated with water or ethyl alcohol. Graft copolymer having longer PEO side chains and higher PEO content shows aseparated PEO phase with even a certain degree of crystallinity on the surface. PEO crystallinity was destroyed by water orethyl alcohol treatment, however, surface treatment with petroleum ether or cyclohexane favors the growth of PEO crystal.TEM shows that graft copolymers with longer PEO side chains (M_n of PEO, 3200) may readily undergo microphase separation and the shape and size of domains depend on the copolymer's composition.