利用大分子单体技术合成接枝共聚物

大分子单体和小分子共单体共聚是合成接枝共聚物的重要途径之一。本文综述了大分子单体通过各种聚合方式(自由基共聚、离子型共聚、配位共聚、基团转移共聚和逐步共聚)和普通小分子单体的共聚反应,详细讨论了大分子单体和小分子单体的自由基共聚反应动力学,并简要介绍了接枝共聚物的应用背景。     

降冰片烯封端的聚苯乙烯大分子单体与乙烯共聚的初步报告

大分子单体(macromer)共聚合为合成结构确定的接枝共聚物提供了新途径,但用络合催化剂进行共聚的例子很少。前文报导了末端为降冰片烯(NB)的聚苯乙烯大分子单体PS-NB的合成及表征;现报告其与乙烯的共聚,以制备主干为聚乙烯(PE)、支链为聚苯乙烯(PS)的接枝共聚物PE-g-PS的初步结果。     

含氟两亲接枝共聚物的制备及其与牛血清蛋白作用的研究

用端基反应法合成了对乙烯基苄基的聚乙二醇大分子单体,将该大分子单体与甲基丙烯酸六氟丁酯共聚,合成了一种含氟两亲接枝共聚物.利用1H-NMR1、9F-NMR、GPC对大分子单体和两亲接枝共聚物进行了表征.表面张力法测定了两亲接枝共聚物的临界胶束浓度,发现随着共聚物中含氟链段含量的增加,其临界胶束浓度降低.采用荧光光谱研究了含氟两亲接枝共聚物与牛血清蛋白(BSA)的相互作用,结果表明由于含氟链段疏水力的作用,含氟两亲接枝共聚物能与牛血清蛋白发生相互作用使其荧光增强,随着含氟两亲接枝共聚物浓度和共聚物中含氟链段含量的增加,荧光增强幅度加大.通过透射电子显微镜(TEM)和激光光散射粒度仪(PCS)测试发现,当BSA加入到含氟两亲接枝共聚物的胶束溶液后,所得胶束的粒径和粒径分布变大,共聚物胶束由规整的实心核壳结构变为囊泡状核壳结构.     

聚乙烯亚胺接枝聚对二氧环己酮的合成与表征

以聚乙烯亚胺(PEI)为大分子引发剂,辛酸亚锡为催化剂,引发对二氧环己酮(PDO)单体开环聚合,通过graft from法制备了聚乙烯亚胺接枝聚对二氧环己酮接枝共聚物(PEI-g-PPDO).通过FTIR、1H-NMR、1H-13C-HMQC等对共聚物的分子结构进行了表征.共聚产物的接枝链长度、亲疏水链段含量等可以通过反应物中单体的含量进行有效调控;用DSC对共聚物的热性能和结晶性能研究表明,接枝链段长度越大、PPDO链段含量越高,共聚物的结晶性能也越好.采用芘探针法初步研究了共聚物在水中的胶束化行为,PEI-g-PPDO接枝共聚物在水中可以形成较稳定的聚集体.     

PEB/MMA-AN悬浮接枝共聚反应机理

研究了乙烯-1-丁烯共聚物(PEB)弹性体与甲基丙烯酸甲酯(MMA)-丙烯腈(AN)悬浮接枝共聚反应行为及接枝共聚产物对SAN树脂增韧作用随反应时间的变化规律, 用凝胶渗透色谱法和傅里叶变换红外光谱法对接枝共聚产物进行了表征, 分析了接枝共聚反应机理, 推算了接枝链分子量. 结果表明, 体系首先发生链增长自由基向PEB转移终止形成非接枝共聚物(MAN_L)和PEB大分子自由基引发单体共聚形成接枝链(g-MAN)的反应, 接枝反应结束后体系发生明显的非接枝共聚形成非接枝共聚物(MAN_H)的反应; MAN_L的分子量低于g-MAN的分子量, 而g-MAN的分子量明显低于MAN_H的分子量; 在接枝共聚过程中发生已接枝和未接枝PEB断链并随机再接生成多嵌段共聚物的副反应; 在反应初期, 接枝链的AN单元含量接近于非接枝共聚物的AN单元含量, 在反应中后期前者远低于后者.     

可聚合的光引发转移终止剂合成接枝共聚物

采用一种可聚合的光引发转移终止剂 ,2 N ,N 二乙基二硫代氨基甲酰氧基乙酸 β 甲基丙烯酰氧基乙酯 (MAEDCA) ,通过两种途径制备了含有聚甲基丙烯酸甲酯 (PMMA)和聚苯乙烯 (PSt)链段的接枝共聚物 .其一是将MAEDCA作为引发剂 ,在紫外光照射下引发MMA聚合 ,得到大分子单体 ,通过大分子单体与St的共聚合得到 .考察了所用大分子单体的分子量和浓度对共聚合的影响 .其二是将MAEDCA作为单体与MMA共聚得到侧链上含有N ,N 二乙基二硫代氨基甲酰氧基 (DC)基团的无规共聚物 ,P(MMA co MAEDCA) .在紫外光照射下 ,P(MMA co MAEDCA)作为大分子引发剂引发St聚合 ,得到P(MMA co MAEDCA) g PSt的共聚物 ,研究了接枝共聚合过程的活性自由基聚合特征     

碳链接枝共聚物——Ⅲ.聚丙烯酰胺的均相氧化及其与苯乙烯接枝共聚反应

不久前我们曾报导了聚丙烯酰胺的水溶液在室温或55℃时有可能与过氧化氢发生均相氧化反应,形成聚丙烯酰胺大分子过氧化物.这种水溶性的聚丙烯酰胺大分子过氧化物可引发烯类单体的接枝共聚,得到相应的碳链接枝共聚物。利用这种简便的接枝方法不仅可以合成一系列具有综合性能的接枝共聚物新品种,而且对大分子过氧化物引发烯类单体接枝共聚反应历程的研究也具有一定意义。     

PU大分子单体水溶液性质

双亲聚合物一般由亲水和亲油 2种链段构成 ,有嵌段型[1,2 ] 和接枝型[3 ] 2种 ,其中通过大分子单体法合成双亲接枝聚合物备受关注[4] 。如以亲水性大分子单体和亲油性小分子单体共聚 ,大分子单体构成共聚物主链上支链 ,具有较大活动性 ,亲水效能高。采用对氯甲基苯乙烯[5] 或甲基丙烯酰氯[6] 与聚氧化乙烯大分子的一端相反应 ,可得到亲水性大分子单体 ,但其分子量及结构变化有限。本文采用常规条件 ,合成了嵌段式水溶性聚氨酯大分子单体 ,其分子量较大 ,共聚接枝的支链较长。利用该大分子单体具有非离子高分子表面活性剂的性质 ,采用无皂乳…     

温度/pH敏感性P(MAA-g-DEAM)共聚物水溶液的相行为

利用大分子单体技术通过自由基共聚法合成了由甲基丙烯酸(MAA)和N, N-二乙基丙烯酰胺(DEAM)组成的几种不同组成的P(MAA-g-DEAM)接枝共聚物.通过UV-Vis 透光率的测定和荧光探针技术, 对共聚物水溶液的相行为进行了研究. 研究表明, 此接枝共聚物具有相互独立的温度和pH 敏感性；几种组成不同的P(MAA-g-DEAM)接枝共聚物具有基本相同的低临界溶解温度(LCST)；它们的临界相变pH与接枝共聚物的组成有关, 温敏性PDEAM 枝链的接枝率越高, 其临界相变pH 越高. pH > 5.5 时, 接枝共聚物的主链是一种较为松散的线团构象；pH < 5.5 时, 接枝共聚物的主链是一种较为压缩的线团构象. 这种接枝共聚物高分子聚集体在新的纳米复合材料的合成方面有可能获得应用.     

基于聚乙烯的无规和嵌段接枝共聚物的制备

采用乙烯配位聚合和巯基-烯点击化学相结合的方法制备了羟基封端的线性聚乙烯,末端羟基含量接近100%;利用酰氯与羟基的高效反应,将羟基封端的聚乙烯转化为降冰片烯封端的聚乙烯大单体(PE-NB).使用Grubbs II代催化剂,将大分子单体与降冰片烯(NB)单体进行开环易位共聚,通过调整单体的投料比和加料方式制备了分子量和组成可控的聚降冰片烯-g-聚乙烯(PNB-g-PE)接枝共聚物.其中,无规共聚时,大单体的转化率接近100%,所得无规接枝共聚物的重均分子量为1.79×10~4~3.14×10~4,分子量分布指数为2.09~2.60,聚乙烯链段的质量分数为4.6%~16.8%;而嵌段共聚时,由于空间位阻原因,大单体的转化率约为80%.热分析研究发现,由于空间位阻,接枝共聚物的结晶度较聚乙烯前驱体略有下降,且接枝度越大,结晶能力下降得越多.     

含铕荧光两亲接枝共聚物的制备及胶束化行为

以丙烯酸(AA)、 苯甲酸(BA)和邻菲啰啉(Phen)为配体, Eu³⁺为中心离子, 制备了可聚合荧光配合物单体, 并以此单体为功能单体, 聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)和甲基丙烯酸六氟丁酯(HFMA)为共聚单体, 通过溶液聚合制备出含铕两亲荧光接枝共聚物P-[HFMA-co-Eu(AA)(BA)₂Phen]g-PEG. 利用红外光谱(FTIR)和核磁共振波谱(¹H NMR和¹⁹F NMR)对共聚物的结构进行表征; 采用表面张力法测定共聚物的临界胶束浓度(cmc)为0.20 g/L; 通过透射电子显微镜(TEM)和动态光散射仪(DLS)观察胶束的形貌及其胶束化行为, 发现该共聚物可以形成大小均一的球形胶束, 且随着共聚物浓度的提高, 胶束粒径相应增大; 在溶液浓度达到临界胶束浓度时, 溶液荧光出现强度突变.     

温敏性含氟两亲接枝共聚物的制备及胶束化行为

以聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)为大分子单体, 甲基丙烯酸六氟丁酯(HFMA)为含氟单体, N-异丙基丙烯酰胺(NIPAAm)为功能性单体, 采用大分子单体接枝共聚法, 制备了一种温敏性含氟两亲接枝共聚物P(NIPAAm-co-HFMA)-g-PEG. 利用FTIR, ¹H NMR, ¹⁹F NMR和GPC对共聚物的结构进行表征; 采用紫外-可见分光光度计测定了共聚物的低临界溶解温度(LCST)约为38.9 ℃, 高于人体正常的生理温度; 利用荧光探针技术测定了共聚物的临界胶束浓度(cmc), 结果表明, 当共聚物溶液温度高于LCST时, 其cmc明显变小; 利用激光光散射粒度仪(LLS)测定了共聚物胶束的水合粒径及其分布, 当温度达到LCST时, 胶束粒径明显变小, 温度过高时, 粒径又有所增大; 利用透射电子显微镜(TEM)研究了共聚物胶束的形貌, 结果表明, P(NIPAAm-co-HFMA)-g-PEG在水溶液中可自组装成球状胶束粒子, 随着温度的升高, 共聚物胶束由松散的核壳结构转变成更加紧凑的球状结构, 且粒径明显变小.     

Synthesis and characterization of biodegradable amphiphilic PEG-grafted poly(DTC-co-CL)

<正>A novel biodegradable copolymer,poly(5,5-dibromomethyltrimethylene carbonate-co-ε-caprolactone)(poly(DBTC-co-CL)) with pendant bromine groups,was synthesized via ring-opening polymerization(ROP) ofε-caprolactone(CL) and 5,5- dibromomethyltrimethylene carbonate(DBTC) using stannous octoate(Sn(Oct)_2) as catalyst.Then the pendant bromine groups were completely converted into azide form,which permitted"click"reaction with alkyne-terminated polyethylene(A-PEG) by Huisgen 1,3-dipolar cycloadditions preparing biodegradable amphiphilic poly(DTC-co-CL)-g-PEG graft copolymer.The graft copolymer was characterized by nuclear magnetic resonance(NMR) and size-exclusion chromatography(SEC).     

Study on the interaction between a fluorine-containing amphiphilic cationic copolymer and nucleic acid by resonance light scattering technique

A novel fluorine-containing amphiphilic cationic copolymer P(HFMA-St-MOTAC)-g-PEG was synthesized as a new probe to detect DNA based on the RLS technique. The aggregation of P(HFMA-St-MOTAC)-g-PEG on the molecular surface of DNA occurred under pH 4.0-7.0 resulted in an enhanced resonance light-scattering (RLS) peaks at 370 nm, 400 nm, 420 nm and 470 nm. The intensity of resonance light-scattering was found to be proportional to the concentration of DNA. The detection limit was 5.8 μg L⁻¹. It was found that the P(HFMA-St-MOTAC)-g-PEG has strong interaction with DNA as confirmed by the resonance light scattering (RLS) spectroscopy, UV spectra, IR spectra, and TEM.     

含氟两亲接枝共聚物的制备及其结晶行为

采用大分子单体技术合成了一系列以聚乙二醇为支链、甲基丙烯酸六氟丁酯为主链的含氟两亲接枝共聚物(PHFMA-g-PSPEG)。用1HNMR和凝胶色谱(GPC)对制备的大分子单体和两亲接枝共聚物的结构进行了表征。利用示差扫描量热法(DSC)、X射线衍射(XRD)和偏光显微镜(POM)测试技术对含氟两亲接枝共聚物的结晶行为进行了研究。DSC和XRD结果表明,随着共聚物中含氟链段质量分数的增加,其结晶温度(Tc)和结晶度(Xc)均降低,而结晶熔融温度(Tm)先减小后增加。POM发现,随着共聚物中含氟链段质量分数的增加,其结晶速度减慢,共聚物形成清晰球晶的能力减弱,当共聚物中含氟链段质量分数为57%时,含氟两亲接枝共聚物已不能形成清晰的球晶。     

Self‐emulsification and surface modification effect of fluorinated amphiphilic acrylate graft copolymers

We report on self‐emulsification and surface modification effect of novel fluorinated amphiphilic graft copolymers prepared with perfluoroalkyl acrylate and 2‐dimethylaminoethyl methacrylate using simple macromonomer technique and radical copolymerization. The interfacial properties of amphiphilic graft copolymers were characterized with light scattering, contact angle measurement, and X‐ray photoelectron spectroscopy. The preparation of fluorinated amphiphilic graft copolymer was verified using nuclear magnetic resonance and Fourier transform infrared spectroscopy. It was observed that the fluorinated amphiphilic graft copolymer has both strong hydrophobic and hydrophilic properties and shows self‐emulsification ability without addition of external surfactants. The graft copolymer shows very low surface energy even though the copolymer has low content of hydrophobic segment and better performance than random copolymer for low‐energy surface modification. The addition of small amount of the graft copolymer (0.1 wt %) into the base poly(methyl methacrylate) was sufficient to lower the surface energy less than that of poly(tetrafluoroethylene). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,self‐assembly,and thermosensitive properties of ethyl cellulose‐g‐P(PEGMA) amphiphilic copolymers

Ethyl cellulose graft poly(poly(ethylene glycol) methyl ether methacrylate) (EC‐g‐P(PEGMA)) amphiphilic copolymers were synthesized via atom transfer radical polymerization (ATRP) and characterized by FTIR, ¹H NMR, and gel permeation chromatography. Reaction kinetics analysis indicated that the graft copolymerization is living and controllable. The self‐assembly and thermosensitive property of the obtained EC‐g‐P(PEGMA) amphiphilic copolymers in water were investigated by dynamic light scattering, transmission electron microscopy, and transmittance. It was found that the EC‐g‐P(PEGMA) amphiphilic copolymers can self‐assemble into spherical micelles in water. The size of the micelles increases with the increase of the side chain length. The spherical micelles show thermosensitive properties with a lower critical solution temperature around 65 °C, which almost independent on the graft density and the length of the side chains. The obtained EC‐g‐P(PEGMA) graft copolymers have both the unique properties of poly(ethylene glycol) and cellulose, which may have the potential applications in biomedicine and biotechnology. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 46: 6907–6915, 2008     

Synthesis and properties of fluorine‐containing amphiphilic graft copolymer P(HFMA)‐g‐P(SPEG)

A series of amphiphilic graft copolymers P(HFMA)‐g‐P(SPEG) comprising poly(hexafluorobutyl methacrylate) (PHFMA) backbones and poly(ethylene glycol) (PEG) side chains were synthesized by copolymerization of HFMA and SPEG macromonomer with the p‐vinylbenzyl end group. The SPEG macromonomer was synthesized by reacting Methoxy poly(ethylene glycol) (MPEG) with p‐chloromethylstyrene in THF in the presence of NaH. The macromonomer and amphiphilic graft copolymer were characterized by FTIR, ¹H NMR, ¹⁹F NMR, and gel permeation chromatography (GPC). The critical micelle concentration (CMC) of the amphiphilic graft copolymer was measured by surface tension technique. The results showed that the CMC decreased with increasing HFMA contents in the graft copolymers. The interaction between P(HFMA)‐g‐P(SPEG) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy, transmission electron microscopy (TEM), and photon correlation spectroscopy (PCS). The fluorescence spectrum showed that the fluorescence intensity of BSA increased with increasing content of HFMA in P(HFMA)‐g‐P(SPEG) and concentration of P(HFMA)‐g‐P(SPEG) in the P(HFMA)‐g‐P(SPEG)/BSA solution. TEM micrographs showed that P(HFMA)‐g‐P(SPEG) mainly formed core‐shell structure micelles. When BSA was added, the micelles changed from a core‐shell structure into a worm‐like, vesicle‐like and hollow‐like structure with different initial concentrations of the copolymer. The size distribution of the micelles increased proving that the copolymer micelles encapsulated the bovine serum albumin. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4895–4907, 2009     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008