温敏性含氟两亲接枝共聚物的制备及胶束化行为

以聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)为大分子单体, 甲基丙烯酸六氟丁酯(HFMA)为含氟单体, N-异丙基丙烯酰胺(NIPAAm)为功能性单体, 采用大分子单体接枝共聚法, 制备了一种温敏性含氟两亲接枝共聚物P(NIPAAm-co-HFMA)-g-PEG. 利用FTIR, ¹H NMR, ¹⁹F NMR和GPC对共聚物的结构进行表征; 采用紫外-可见分光光度计测定了共聚物的低临界溶解温度(LCST)约为38.9 ℃, 高于人体正常的生理温度; 利用荧光探针技术测定了共聚物的临界胶束浓度(cmc), 结果表明, 当共聚物溶液温度高于LCST时, 其cmc明显变小; 利用激光光散射粒度仪(LLS)测定了共聚物胶束的水合粒径及其分布, 当温度达到LCST时, 胶束粒径明显变小, 温度过高时, 粒径又有所增大; 利用透射电子显微镜(TEM)研究了共聚物胶束的形貌, 结果表明, P(NIPAAm-co-HFMA)-g-PEG在水溶液中可自组装成球状胶束粒子, 随着温度的升高, 共聚物胶束由松散的核壳结构转变成更加紧凑的球状结构, 且粒径明显变小.     

含氟两亲接枝共聚物的制备及其结晶行为

采用大分子单体技术合成了一系列以聚乙二醇为支链、甲基丙烯酸六氟丁酯为主链的含氟两亲接枝共聚物(PHFMA-g-PSPEG)。用1HNMR和凝胶色谱(GPC)对制备的大分子单体和两亲接枝共聚物的结构进行了表征。利用示差扫描量热法(DSC)、X射线衍射(XRD)和偏光显微镜(POM)测试技术对含氟两亲接枝共聚物的结晶行为进行了研究。DSC和XRD结果表明,随着共聚物中含氟链段质量分数的增加,其结晶温度(Tc)和结晶度(Xc)均降低,而结晶熔融温度(Tm)先减小后增加。POM发现,随着共聚物中含氟链段质量分数的增加,其结晶速度减慢,共聚物形成清晰球晶的能力减弱,当共聚物中含氟链段质量分数为57%时,含氟两亲接枝共聚物已不能形成清晰的球晶。     

聚丙烯酰胺/聚L-谷氨酸苄酯接枝共聚物的合成及其胶束制备

以聚丙烯酰胺(PAM)为大分子引发剂, 采用开环聚合方法, 在N,N-二甲基甲酰胺(DMF)中引发L-谷氨酸苄酯环内酸酐(BLG-NCA)聚合合成了两亲性聚丙烯酰胺/聚L-谷氨酸苄酯接枝共聚物(PAM-g-BLG), 采用IR, 1H NMR和GPC方法对共聚物结构进行了表征; 用芘作荧光探针, 研究了共聚物胶束的形成及其临界胶束浓度(cmc), 利用动态光散射(DLS)和透射电镜(TEM)研究了胶束的粒径分布和形态. 结果表明, PAM能够引发BLG-NCA开环聚合得到接枝共聚物, 在一定条件下接枝共聚物能够形成球形的稳定胶束, cmc值和胶束粒径随着共聚物中疏水性聚L-谷氨酸苄酯(PBLG)链段含量的增加而减小.     

聚丙烯酸接枝辛基酚聚氧乙烯醚的合成、表征和胶束化

通过自由基聚合, 丙烯酸(AA)与辛基酚聚氧乙烯醚丙烯酸酯活性大单体(C8PhEO10Ac)共聚,合成了以聚丙烯酸为主链、C8PhEO10Ac 为支链的水溶性两亲接枝共聚物(PAA-g-C8PhEO10Ac), 用凝胶渗透色谱(GPC)测定其相对数均分子质量为4.37×10⁴, 用FTIR和1H-NMR表征了共聚物的结构和组成, 共聚物分子中丙烯酸单体与活性大单体的摩尔比为9:1, 每个共聚物分子中平均约有32个C8PhEO10侧链. 用表面张力法、荧光探针法和透射电子显微镜对共聚物在水溶液中的自组装行为进行了初步研究, 结果表明, 共聚物分子在第一临界胶束浓度cmc1)和第二临界胶束浓度(cmc2)时都形成了球型胶束. 与cmc1时相比, cmc2时溶液表面张力进一步降低, 胶束内部极性进一步减小, 而且胶束粒径增大、结构紧密. 氯化钠的加入可使共聚物溶液的表面张力和胶束内部极性降低.     

含环状原酸酯侧基的两亲性嵌段共聚物及其酸敏感胶束状聚集体

合成了含有环状原酸酯基团的单体,甲基丙烯酸5-(5-甲基-2-乙氧基-1,3-二氧六环)甲酯(EDMM),以PEO大分子引发剂引发,通过原子转移自由基聚合方法制备了两个疏水链段(PEDMM)长度不同的酸敏感两亲性嵌段共聚物,PEO-b-PEDMM17和PEO-b-PEDMM34.两个聚合物在水溶液中形成粒径约为60～200nm的球型聚集体,通过动态光散射、透射电镜、荧光探针等手段表征了所得聚集体.结果显示,疏水链段较短的共聚物的临界聚集浓度较高,形成的聚集体尺寸较小.核磁和荧光探针结果表明,胶束状聚集体在中性(pH7.4)水溶液中比较稳定,在酸性水溶液中其疏水核的极性因原酸酯的水解而增加.该类酸敏感胶束状聚集体有望用于肿瘤、细胞内给药等药物传递体系.     

N-异丙基丙烯酰胺/丙烯酸胆甾醇酯共聚物研究

合成和表征了N 异丙基丙烯酰胺 (NIPAM)与丙烯酸胆甾醇酯 (CHA)的共聚物 .利用表面张力和荧光探针法研究了共聚物水溶液的表面活性性能 ,确定了其临界胶束浓度 (CMC) .利用浊度法和荧光探针法测定了共聚物的最低临界溶液温度 (LCST) .研究发现 ,在聚N 异丙基丙烯酰胺 (PNIPAM)分子链中引入疏水结构单元CHA会使其LCST下降 ;且随着共聚物中CHA含量的增加 ,LCST下降幅度增加 .在PNIPAM链段中引入少量的CHA就会使其表现出明显的两亲性 ,共聚物在水中能形成有壳核结构的稳定胶束 .通过将疏水化合物胆甾醇作为模拟药物包埋在胶束的疏水核中的研究 ,证实所得的胶束能包埋疏水药物 ,且随着包埋胆甾醇含量的增加 ,胶束平均粒径增大 .     

两亲性树状接枝己内酯共聚物的合成与表征

通过树状接枝聚己内酯的侧羟基及端羟基与氯甲酰化的聚乙二醇进行接枝反应,得到带有亲水性聚乙二醇链段的新型两亲性树状接枝共聚物.1H-NMR分析显示,接枝率为50%左右.GPC分析结果表明,共聚物分子量呈较窄的单峰分布,分子量与接枝前相比明显增高.两亲性共聚物能直接分散在水中形成胶束溶液.以芘为荧光探针的测试结果表明其临界胶束浓度有降低.动态光散射测得胶束平均粒径在16至31 nm之间,粒径分散指数适中,PDI在0.25至0.39之间.TEM显示胶束粒子为不规整球形,由更小的粒径为几个纳米的微粒聚集而成,这些微粒的大小刚好与单个大分子的尺寸相匹配.因此,两亲性树状接枝聚己内酯在水相中存在单分子胶束与多分子组装胶束的平衡.得益于支化聚合物结构中的纳米空腔,两亲性树状接枝聚合物胶束对紫杉醇具有优良的包载能力.     

含铕荧光两亲接枝共聚物的制备及胶束化行为

以丙烯酸(AA)、 苯甲酸(BA)和邻菲啰啉(Phen)为配体, Eu³⁺为中心离子, 制备了可聚合荧光配合物单体, 并以此单体为功能单体, 聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)和甲基丙烯酸六氟丁酯(HFMA)为共聚单体, 通过溶液聚合制备出含铕两亲荧光接枝共聚物P-[HFMA-co-Eu(AA)(BA)₂Phen]g-PEG. 利用红外光谱(FTIR)和核磁共振波谱(¹H NMR和¹⁹F NMR)对共聚物的结构进行表征; 采用表面张力法测定共聚物的临界胶束浓度(cmc)为0.20 g/L; 通过透射电子显微镜(TEM)和动态光散射仪(DLS)观察胶束的形貌及其胶束化行为, 发现该共聚物可以形成大小均一的球形胶束, 且随着共聚物浓度的提高, 胶束粒径相应增大; 在溶液浓度达到临界胶束浓度时, 溶液荧光出现强度突变.     

聚L-丙氨酸-聚乙二醇嵌段共聚物的胶束化行为研究

以氨基聚乙二醇单甲醚(MPEG-NH₂)为大分子引发剂, 采用开环聚合方法合成了聚L-丙氨酸-聚乙二醇嵌段共聚物(PAME), 并对其结构进行了表征; 用圆二色谱(CD)研究了嵌段共聚物在水溶液中的二级结构, 用芘荧光探针技术研究了共聚物胶束的形成及其临界胶束浓度(CMC), 利用动态光散射(DLS)和透射电镜(TEM)研究了胶束的粒径分布和形态. 结果表明, 在水溶液中共聚物链以α-螺旋构象形式存在, 在一定条件下嵌段共聚物能够形成球形的稳定胶束, PAME-1形成胶束的CMC为1.99×10^-5 mol/L, CMC值受共聚物中聚L-丙氨酸(PLA)链段含量的影响.     

双亲嵌段共聚物PSt-b-PAA在甲苯中的自聚集行为

以α-溴乙苯为引发剂,溴化亚铜为催化剂,2,2'-联吡啶为配体,用原子转移自由基聚合(ATRP)法合成了结构一定的嵌段共聚物聚苯乙烯-b-聚丙烯酸丁酯(PSt-b-PBA).经水解制备了双亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸(PSt-b-PAA);采用单溶剂溶解法配制了PSt-b-PAA在甲苯中的反胶束溶液;以极性荧光化合物N-1-萘乙二胺盐酸盐(NEAH)为极性微区探针,用荧光光谱法并配合透射电镜观察探索了双亲嵌段共聚物PSt-b-PAA在甲苯溶液中的自聚集行为,考察了双亲性嵌段共聚物浓度、链结构及温度等因素对反胶束化行为的影响规律.结果表明,亲水链PAA短而亲油链PSt长的双亲嵌段共聚物PSt-b-PAA,用单溶剂溶解法可使其在甲苯中发生自聚集,形成以亲水段为核,疏水段为壳的星状反胶束结构;反胶束为10-20nm的球形聚集态结构;PSt-b-PAA的自聚集行为及临界胶束浓度与分子链的微结构和温度等因素相关,且随着共聚物浓度的增大,小胶束会逐渐结合形成大的纺垂状聚集体.     

Synthesis and properties of fluorine‐containing amphiphilic graft copolymer P(HFMA)‐g‐P(SPEG)

A series of amphiphilic graft copolymers P(HFMA)‐g‐P(SPEG) comprising poly(hexafluorobutyl methacrylate) (PHFMA) backbones and poly(ethylene glycol) (PEG) side chains were synthesized by copolymerization of HFMA and SPEG macromonomer with the p‐vinylbenzyl end group. The SPEG macromonomer was synthesized by reacting Methoxy poly(ethylene glycol) (MPEG) with p‐chloromethylstyrene in THF in the presence of NaH. The macromonomer and amphiphilic graft copolymer were characterized by FTIR, ¹H NMR, ¹⁹F NMR, and gel permeation chromatography (GPC). The critical micelle concentration (CMC) of the amphiphilic graft copolymer was measured by surface tension technique. The results showed that the CMC decreased with increasing HFMA contents in the graft copolymers. The interaction between P(HFMA)‐g‐P(SPEG) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy, transmission electron microscopy (TEM), and photon correlation spectroscopy (PCS). The fluorescence spectrum showed that the fluorescence intensity of BSA increased with increasing content of HFMA in P(HFMA)‐g‐P(SPEG) and concentration of P(HFMA)‐g‐P(SPEG) in the P(HFMA)‐g‐P(SPEG)/BSA solution. TEM micrographs showed that P(HFMA)‐g‐P(SPEG) mainly formed core‐shell structure micelles. When BSA was added, the micelles changed from a core‐shell structure into a worm‐like, vesicle‐like and hollow‐like structure with different initial concentrations of the copolymer. The size distribution of the micelles increased proving that the copolymer micelles encapsulated the bovine serum albumin. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4895–4907, 2009     

阴离子型含氟两亲接枝共聚物的合成及其胶束化行为研究

以聚乙二醇甲醚甲基丙烯酸酯(MPEGMA)为大分子单体,甲基丙烯酸六氟丁酯(HFMA)、对苯乙烯磺酸钠(NaSS)为共聚单体,采用大分子单体接枝共聚法,制备了一种阴离子型含氟两亲接枝共聚物P( HFMA-co-NaSS) -g-PEG.利用FTIR、1H-NMR和19F-NMR对共聚物的分子结构进行了表征.表面张力法测...     

Interaction Between Fluorinated Amphiphilic Copolymer P(HFMA)-g-P(SPEG) and BSA

A novel fluorinated amphiphilic copolymer P(HFMA)-g-P(SPEG) was synthesized. The interactions between P(HFMA)-g-P(SPEG) and bovine serum albumin (BSA) were studied by synchronous fluorescence and intrinsic fluorescence spectroscopy. It was concluded through synchronous fluorescence that P(HFMA)-g-P(SPEG) mainly bound to tryptophan residues of BSA. Intrinsic fluorescence results revealed that BSA and P(HFMA)-g-P(SPEG) had strong interactions. The mechanism of quenching belonged to dynamic quenching and the main sort of binding force was hydrophobic force. The hydrophobic interaction between P(HFMA)-g-P(SPEG) and BSA was conformed by micropolarity and TEM photographs.     

聚对二氧环己酮/聚乙二醇多嵌段共聚物的合成与表征

首先合成双端羟基的聚对二氧环己酮预聚物(PPDO)和双端羧基的聚乙二醇预聚物(PEG),然后以丁二酸酐/二环己基碳二亚胺(DCC)将PPDO与PEG偶联共聚,得到PPDO/PEG多嵌段共聚物.通过1H-NMR和GPC表征了聚合物的结构和分子量.采用差示扫描量热法(DSC)和热重分析(TGA)研究了共聚物的结晶性能和热稳定性.用透析法制备了共聚物纳米粒子,并用动态光散射(DLS)表征了共聚物纳米粒子的粒径及分散度,结果表明,随着共聚物亲水链段PEG含量的增加,其纳米粒子更易形成,粒子粒径随共聚物分子量增大而增大.     

二维核磁共振法研究线型聚乙二醇与树枝状聚苄醚形成的三嵌段共聚物

嵌段共聚物是由几个不同的高分子链段通过化学键相连所构成的 .在合成方法上一般是通过几类不同的活性聚合 ,调控单体的加料次序或者通过不同的大分子链段末端的反应活性点偶联而成[1～ 3 ] .所形成的化学键将嵌段共聚物中不相溶的几段相连 ,于是在特定的条件下就产生了微相分离的现象 ,继而可以在 1 0～ 1 0 0nm尺度范围内形成各种各样的微区结构[4,5] .在过去的几十年里 ,研究的重点是认定嵌段共聚物的微区结构和研究微相分离的动力学 ,已发表了大量重要的结果 ,至今仍然是高分子科学中的热门课题 .非常重要的一点是 ,正是由于不同的高分…     

Metal-free synthesis of amphiphilic functional polycarbonates

Amphiphilic block copolymers of poly(5-benzyloxy trimethylene carbonate)(PBTMC) and poly(ethylene glycol)(PEG) were synthesized through enzymatic polymerization using immobilized porcine pancreas lipase(IPPL).The obtained copolymers with different compositions were characterized by GPC and ~1H NMR.The copolymer composition was in agreement with the feed ratio. The molecular weight of the copolymers showed an increasing trend with the decrease of PEG contents.Micelles of the copolymers were formed by dialysis procedure,and characterized by transmission electron microscopy (TEM).     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Amphiphilic PEG‐grafted poly(ester‐carbonate)s: Synthesis and diverse nanostructures in water

Novel biodegradable amphiphilic graft copolymers containing hydrophobic poly(ester‐carbonate) backbone and hydrophilic poly(ethylene glycol) (PEG) side chains were synthesized by a combination of ring‐opening polymerization and “click” chemistry. First, the ring‐opening copolymerization of 5,5‐dibromomethyl trimethylene carbonate (DBTC) and ε‐caprolactone (CL) was performed in the presence of stannous octanoate [Sn(Oct)₂] as catalyst, resulting in poly(DBTC‐co‐CL) with pendant bromo groups. Then the pendant bromo groups were completely converted into azide form, which permitted “click” reaction with alkyne‐terminated PEG by Huisgen 1,3‐dipolar cycloadditions to give amphiphilic biodegradable graft copolymers. The graft copolymers were characterized by proton nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectra and gel permeation chromatography measurements, which confirmed the well‐defined graft architecture. These copolymers could self‐assemble into micelles in aqueous solution. The size and morphologies of the copolymer micelles were measured by transmission electron microscopy and dynamic light scattering, which are influenced by the length of PEG and grafting density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Formation of polymer vesicles by amphiphilic fluorosiloxane graft copolymers in solution

Amphiphilic fluorosiloxane graft copolymers with a poly(dimethylsiloxane)(PDMS) backbone,a hydrophobic fluorosiloxane side-chain and three hydrophilic poiyether side-chains were synthesized by hydrosilation reaction in this work.The micellization of amphiphilic graft copolymers in the water/ethanol solvent system was investigated,and vesicles with different size were formed after the self-assembly system was aged for different time.