Novel acrylonitrile-based copolymers containing phospholipid moieties: synthesis and characterization

Novel acrylonitrile-based copolymers containing phospholipid moieties were synthesized by a three-step process, which included the copolymerization of acrylonitrile and 2-hydroxyethyl methacrylate (HEMA) in water and the reaction of the resulting poly[acrylonitrile-co-(2-hydroxyethyl methacrylate)]s (PANCHEMA) with 2-chloro-2-oxo-1,3,2-dioxaphospholane (COP) followed by the ring-opening reaction of COP with trimethylamine. The chemical structure of PANCHEMA and the phospholipid-containing acrylonitrile-based copolymers (PLCANCP) was analyzed with FT-IR spectroscopy, (1)H and (31)P NMR, and XPS. Surface properties of the studied copolymers were evaluated by the pure water contact angle, protein adsorption and platelets adhesion measurements. The water contact angle measured by sessile drop method decreased for the polymers in the following sequence: PAN, PANCHEMA, and PLCANCP. The adsorption amount of bovine serum albumin and the adhesive number of platelet followed the same decline sequence. These results demonstrate that the biocompatibility of the acrylonitrile-based copolymer membranes could be improved efficiently by the introduction of phospholipid moieties.     

SUPPRESSION OF CELL ADHESION ON POLYACRYLONITRILE-BASED MEMBRANES BY THE ANCHORING OF PHOSPHOLIPID MOIETIES

In this work, the membrane surface of poly（acrylonitrile-co-2-hydroxyethyl methacrylate） （PANCHEMA） was chemically modified by anchoring of phospholipid moieties. The process involved the reaction of hydroxyl groups on the membrane surface with 2-chloro-2-oxo-1,3,2-dioxaphospholane （COP） followed by the ring-opening reaction of COP with trimethylamine. Chemical differences between the original and the modified membranes were characterized by FT-IR and XPS, It was found that the amount of macrophage adhered on the modified membrane surface is substantially lower than that on polyacrylonitrile （PAN） and PANCHEMA membranes under the same condition, The morphological change of the adherent cell is also suppressed by the generation ofphospholipid moieties on the membrane surface.     

Syntheses and Surface Properties of Polyacrylonitrile-based Copolymer Membranes Containing Sugar Moieties

Introduction Asatypeofwidelyusedmembranematerials, polyacrylonitrile(PAN)hasbeeninvestigatedby manyresearchersinthefieldsofpervaporation,ul- trafiltration,anddialysis[1_4].However,PAN- basedmembranesarerelativelyhydrophobicwitha lowbiocompatibility.Thesepropertieslimittheir furtherapplicationsinaqueoussolutionseparation andtheirusageasbiomedicaldevices.Muchatten- tionhasbeenpaidtoimprovingthecharacteristics ofPAN-basedmembranes.Thecopolymerization ofANwithhydrophilicmonomersisconsideredas…     

Covalent attachment of phospholipid analogous polymers to modify a polymeric membrane surface: a novel approach

A novel method for the surface modification of a microporous polypropylene membrane by tethering phospholipid analogous polymers (PAPs) is given, which includes the photoinduced graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA) and the ring-opening reaction of grafted poly-(DMAEMA) with 2-alkyloxy-2-oxo-1,3,2-dioxaphospholanes. Five 2-alkyloxy-2-oxo-1,3,2-dioxaphospholanes, containing octyloxy, dodecyloxy, tetradecyloxy, hexadecyloxy, and octadecyloxy groups in the molecular structure, were used to fabricate the PAP-modified polypropylene membranes. The attenuated total reflectance FT-IR spectra of the original, poly(DMAEMA)-grafted, and PAP-modified membranes confirmed the chemical changes on the membrane surface. Scanning electron microscope pictures showed that, compared with the original membrane, the surface porosities ofpoly(DMAEMA)-grafted and PAP-modified membranes were somewhat reduced. Water contact angles measured by the sessile drop method on PAP-modified membranes were slightly lower than that on the original polypropylene membrane, but higher than those on poly(DMAEMA)-grafted membranes with the exception of octyloxy-containing PAP-modified membranes. However, BSA adsorption experiments indicated that the five PAP-modified membranes had a much better protein-resistant property than the original polypropylene membrane and the poly(DMAEMA)-grafted membranes. For hexadecyloxy- and octadecyloxy-containing PAP-modified membranes, almost no protein adsorption was observed when the grafting degree was above 6 wt %. It was also found that the platelet adhesion was remarkably suppressed on the PAP-modified membranes. All these results demonstrate that the described approach is an effective way to improve the surface biocompatibility for polymeric membranes.     

Photoinduced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on polyethylene membrane surface for obtaining blood cell adhesion resistance

Phospholipid polymer, poly[2-methacryloyloxyethyl phosphorylcholine (MPC)], was grafted with polyethylene (PE) membrane using photoinduced polymerization technique to make the membrane resistant to cell adhesion. The water contact angle on the PE membrane grafted with poly(MPC) decreased with an increase in the photopolymerization time. This decrease corresponded to the increase in the amount of poly(MPC) grafted on the PE surface. The same graft polymerization procedure was applied using other hydrophilic monomers, such as acrylamide (AAm), N-vinylpyrrolidone (VPy) and methacryloyl poly(ethylene glycol) (MPEG). These monomers were also polymerized to form grafted chains on the PE membrane, and the grafting was confirmed with X-ray photoelectron spectroscopy. Analysis of amount and distribution of plasma proteins at the plasma-contacting surface of the original and the modified PE membranes were analyzed using immunogold assay. The grafting of poly(MPC) and poly(VPy) on PE membrane reduced the plasma protein adsorption significantly compared with that on the original PE membrane. However, the PE membranes grafted with poly(AAm) or poly(MPEG) did not show any effects on protein adsorption. Platelet adhesion on the original and modified PE membranes from platelet-rich plasma was also examined. A large number of platelets adhered and activated on the original PE membrane. Grafting with poly(AAm) did not suppress platelet adhesion, but grafting with poly(MPC) or poly(VPy) on the PE membrane was effective in preventing platelet adhesion. It is concluded that the introduction of the phosphorylcholine group on the surface could decrease the cell adhesion to substrate polymer.     

Hemocompatibility of poly(vinylidene fluoride) membrane grafted with network-like and brush-like antifouling layer controlled via plasma-induced surface PEGylation

In this work, the hemocompatibility of PEGylated poly(vinylidene fluoride) (PVDF) microporous membranes with varying grafting coverage and structures via plasma-induced surface PEGylation was studied. Network-like and brush-like PEGylated layers on PVDF membrane surfaces were achieved by low-pressure and atmospheric plasma treatment. The chemical composition, physical morphology, grafting structure, surface hydrophilicity, and hydration capability of prepared membranes were determined to illustrate the correlations between grafting qualities and hemocompatibility of PEGylated PVDF membranes in contact with human blood. Plasma protein adsorption onto different PEGylated PVDF membranes from single-protein solutions and the complex medium of 100% human plasma were measured by enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies. Hemocompatibility of the PEGylated membranes was evaluated by the antifouling property of platelet adhesion observed by scanning electron microscopy (SEM) and the anticoagulant activity of the blood coagulant determined by testing plasma-clotting time. The control of grafting structures of PEGylated layers highly regulates the PVDF membrane to resist the adsorption of plasma proteins, the adhesion of platelets, and the coagulation of human plasma. It was found that PVDF membranes grafted with brush-like PEGylated layers presented higher hydration capability with binding water molecules than with network-like PEGylated layers to improve the hemocompatible character of plasma protein and blood platelet resistance in human blood. This work suggests that the hemocompatible nature of grafted PEGylated polymers by controlling grafting structures gives them great potential in the molecular design of antithrombogenic membranes for use in human blood.     

Biofouling-resistance expanded poly(tetrafluoroethylene) membrane with a hydrogel-like layer of surface-immobilized poly(ethylene glycol) methacrylate for human plasma protein repulsions

In general, it is a challenge to control the highly polar material grafting from the chemically inert Teflon-based membrane surface. This work describes the surface modification and characterization of expanded poly(tetrafluoroethylene) (ePTFE) membranes grafted with poly(ethylene glycol) methacrylate (PEGMA) macromonomer via surface-activated plasma treatment and thermally induced graft copolymerization. The chemical composition and microstructure of the surface-modified ePTFE membranes were characterized by Fourier transform infrared spectroscopy (FT-IR), contact angle, and bio-atomic force microscopy (bio-AFM) measurements. Biofouling property of the modified membranes was evaluated by the measurements of the plasma protein (γ-globulin, fibrinogen, or albumin) adsorption determined using an enzyme-linked immunosorbent assay (ELISA). In general, the hydrophilicity of the surface of ePTFE membranes increases with increasing the grafting degree of the copolymerized PEGMA. The highly hydrated PEGMA chain on the resulting ePTFE membranes was found to form a surface hydrogel-like layer with regulated coverage in aqueous state, which can be controlled by the content of PEGMA macromonomer in the reaction solution. The relative protein adsorption was effectively reduced with increasing capacity of the hydration for the PEGMA chain grafted on the ePTFE membrane surface. From both results of protein adsorption and platelet adhesion test in vitro, it is concluded that the PEGMA-grafted hydrophilic ePTFE membranes could provide good biofouling resistance to substantially reduce plasma protein and blood platelet fouling on the membrane surface in human body temperature.     

A Novel Approach for the Surface Modification of Polymeric Membrane with Phospholipid Polymer

A new economic and convenient method to modify the surface of microporous polypropylene (PP) membranes with phospholipid polymer was given. The process included the photo-irradiated graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA) and the ring-opening reaction of the grafted polyDMAEMA with 2-alkyloxy-2-oxide-1,3,2-dioxo-phospholanes (AOP). Four AOPs, whose alkyloxy groups consisted of dodecyl, tetradecyl,hexadecyl and octadecyl moieties, were used to convert the grafted polyDMAEMA to phospholipidpolymers. FT-IR spectra confirmed the chemical change of membrane surface. Platelets adhesion experiment indicated that PP membrane with excellent blood compatible surface could be fabricated by this method.     

Hemocompatibility and ultrafiltration performance of PAN membranes surface‐modified by hyperbranched polyesters

Maleic anhydride was grafted onto a polyacrylonitrile (PAN) membrane surface via ultraviolet irradiation. Then, hyperbranched polyester, with varying numbers of hydroxyl end‐groups (H20, H30, and H40), was grafted onto the PAN membrane surface by the reaction of hydroxyl groups with anhydride groups of maleic anhydride. The modified membranes were characterized by scanning electron microscopy, static water contact angle, and attenuated total reflectance‐Fourier transform infrared spectroscopy measurements. The modified membranes showed a higher water flux and better antifouling properties than pristine PAN membranes, and their hydrophilicity was significantly improved. Membrane biocompatibility was characterized by platelet adhesion, and the results indicate that the modified membranes exhibited good biocompatibility. Copyright © 2016 John Wiley & Sons, Ltd.     

Blood compatibility of thermoplastic polyurethane membrane immobilized with water-soluble chitosan/dextran sulfate

Water-soluble chitosan (WSC)/dextran sulfate (DS) was immobilized onto the surface of thermoplastic polyurethane (TPU) membrane after ozone-induced graft polymerization of poly(acrylic acid) (PAA). The surface was characterized with contact angle measurement and X-ray photoelectron spectroscopy (XPS). The adsorption of human plasma fibrinogen (HPF) followed the Langmuir adsorption isotherm. The results showed that the surface density of peroxides generated and poly(acrylic acid) (PAA) grafted reached the maximum value at 20 min of ozone treatment. It was found that the WSC- and DS-immobilized amount increased with pH and the molecular weight of WSC. The membrane/water interfacial free energy increased with PAA-grafting and WSC/DS-immobilization, indicating the increasing wettability of TPU membrane. The adsorption of HPF on TPU-WSC/DS membranes could be effectively curtailed and exhibited unfavorable adsorption. Moreover, WSC/DS immobilization could effectively reduce platelet adhesion and prolong the blood coagulation time, thereby membrane improving blood compatibility of TPU membrane. In addition, the in vitro cytotoxicity test of PEC modification was non-cytotoxic according to much low growth inhibition of L929 fibroblasts. Furthermore, TPU-WSC/DS membranes exhibited higher cell viability than native TPU membrane.     

结构可切换型聚合物刷的构建及表面性能

合成了结构可切换型甲基丙烯酸酯季铵盐(CBMA-1C2). 在聚丙烯(PP)片基表面光接枝构建CBMA-1C2聚合物刷, 其在碱性水溶液中可水解形成两性离子聚合物刷PCBMA. 用蛋白质吸附及血小板黏附实验评价改性表面亲/疏水性及表面电荷对生物分子与材料表面之间相互作用的影响. 结果发现, 与未改性PP片基相比, 聚合物PCBMA-1C2改性表面水解前后均具有优异的亲水性能, 由于聚合物PCBMA-1C2水解前后表面电荷不同, 对生物分子与改性PP表面的相互作用表现出明显差异. 亲水性好、 两性离子结构的聚合物PCBMA表面表现出对蛋白吸附和血小板黏附的良好抑制作用.     

Structural transition of actin filament in a cell-sized water droplet with a phospholipid membrane

Actin filament, F-actin, is a semiflexible polymer with a negative charge, and is one of the main constituents of cell membranes. To clarify the effect of cross talk between a phospholipid membrane and actin filaments in cells, we conducted microscopic observations on the structural changes in actin filaments in a cell-sized (several tens of micrometers in diameter) water droplet coated with a phospholipid membrane such as phosphatidylserine (PS; negatively charged head group) or phosphatidylethanolamine (PE; neutral head group) as a simple model of a living cell membrane. With PS, actin filaments are distributed uniformly in the water phase without adsorption onto the membrane surface between 2 and 6 mM Mg2+, while between 6 and 12 mM Mg2+, actin filaments are adsorbed onto the inner membrane surface. With PE, the actin filaments are uniformly adsorbed onto the inner membrane surface between 2 and 12 mM Mg2+. With both PS and PE membranes, at Mg2+ concentrations higher than 12 mM, thick bundles are formed in the bulk water droplet accompanied by the dissolution of actin filaments from the membrane surface. The attraction between actin filaments and membrane is attributable to an increase in the translational entropy of counterions accompanied by the adsorption of actin filaments onto the membrane surface. These results suggest that a microscopic water droplet coated with phospholipid can serve as an easy-to-handle model of cell membranes.     

Surface characteristics and hemocompatibility of PAN/PVDF blend membranes

Polyacrylonitrile (PAN) was blended with polyvinylidine fluoride (PVDF) at various ratios and made into membranes. The hemocompatibility of the resulting membranes was evaluated based on human plasma proteins adsorption, platelet adhesion, thrombus formation, and blood coagulation time. The PAN/PVDF blends exhibited partial miscibility according to the inward shifting of their two glass transition temperatures. The microstructures of blend membranes examined using atomic force microscopy (AFM) indicated that the roughness increased with the PVDF content, and the phase separation was too severe to form a membrane when the PVDF content was more than 30%. The water contact angle of PAN/PVDF blend membranes increased with the PVDF content. By blending with 20 wt% apolar PVDF the adsorption of blood proteins could be reduced, and hence the platelet adhesion and thrombus formation was also reduced. However, when the PVDF content was 30 wt%, severe thrombogenicity was observed due probably to the more porous structure of blend membrane. These results demonstrated that the hemocompatibility would be improved for PAN/PVDF blend membranes with appropriate hydrophilicity and roughness. Copyright © 2005 John Wiley & Sons, Ltd.     

Improving hydrophilicity and protein resistance of poly(vinylidene fluoride) membranes by blending with amphiphilic hyperbranched-star polymer

To endow hydrophobic poly(vinylidene fluoride) (PVDF) membranes with reliable hydrophilicity and protein resistance, an amphiphilic hyperbranched-star polymer (HPE-g-MPEG) with about 12 hydrophilic arms in each molecule was synthesized by grafting methoxy poly(ethylene glycol) (MPEG) to the hyperbranched polyester (HPE) molecule using terephthaloyl chloride (TPC) as the coupling agent and blended with PVDF to fabricate porous membranes via phase inversion process. The chemical composition changes of the membrane surface were confirmed by X-ray photoelectron spectroscopy (XPS), and the membrane morphologies were measured by scanning electron microscopy (SEM). Water contact angle, static protein adsorption, and filtration experiments were used to evaluate the hydrophilicity and anti-fouling properties of the membranes. It was found that MPEG segments of HPE-g-MPEG enriched at the membrane surface substantially, while the water contact angle decreased as low as 49 degrees for the membrane with a HPE-g-MPEG/PVDF ratio of 3/10. More importantly, the water contact angle of the blend membrane changed little after being leached continuously in water at 60 degrees C for 30 days, indicating a quite stable presence of HPE-g-MPEG in the blend membranes. Furthermore, the blend membranes showed lower static protein adsorption, higher water and protein solution fluxes, and better water flux recovery after cleaning than the pure PVDF membrane.     

Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol)

The surface of polyethersulfone (PES) membrane was modified by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol) (mPEG-PU-mPEG), which were synthesized through solution polymerization with mPEG Mns of 500 and 2000, respectively. The PES and PES/mPEG-PU-mPEG blended membranes were prepared through spin coating coupled with liquid-liquid phase separation. FTIR and (1)H NMR analysis confirmed that the triblock copolymers were successfully synthesized. The functional groups and morphologies of the membranes were studied by ATR-FTIR and SEM, respectively. It was found that the triblock copolymers were blended into PES membranes successfully, and the morphologies of the blended membranes were somewhat different from PES membrane. The water contact angles and platelet adhesion were decreased after blending mPEG-PU-mPEG into PES membranes. Meanwhile, the activated partial thromboplastin time (APTT) for the blended membranes increased. The anti-protein-fouling property and permeation property of the blended membranes improved obviously. SEM observation and 3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay proved the surfaces of the blended membranes promoted human hepatocytes adhesion and proliferation better than PES membrane.     

MMA/MPC共聚物膜的制备及其抗凝血性能研究

采用自由基共聚制得了甲基丙烯酸甲酯与2-甲基丙烯酰氧基乙基磷酰胆碱(MPC)的共聚物, 在模板中将溶剂蒸发得到了共聚物膜. 用差示扫描量热仪(DSC)、凝胶渗透色谱(GPC)、元素分析仪(EA)、氢核磁共振(¹H NMR)及扫描电子显微镜(SEM)对共聚物及其膜的结构与形态进行了表征, 并测定了膜的溶胀度与表面的亲水性, 结合对牛血清蛋白(BSA)吸附研究结果表明: 共聚物膜的溶胀度随着MPC含量的增加而逐渐上升, 并且随着温度的升高而逐渐增大; 由动态接触角(DCA)结果可知共聚物膜表面的链段可随着环境的变化而发生重排, MPC链段向膜表面的迁移提高了膜表面的亲水性, 降低了对蛋白质的吸附. 并通过体外血小板粘附试验对膜材料的抗凝血性能进行了评价. 结果表明, 当共聚物膜中w(MPC)＝0.25时, 膜表面吸附的血小板数量明显减少, 共聚物膜表现出良好的抗凝血性能.     

Cell outer membrane mimetic modification of a cross-linked chitosan surface to improve its hemocompatibility

A novel strategy has been developed to improve the hemocompatibility of chitosan surface by cell outer membrane mimetic structure able to reduce protein adsorption and cell adhesion. Phosphorylcholine dichloride was synthesized and grafted onto a glutaraldehyde-cross-linked chitosan (CS-GA) film surface to prepare phosphorylcholine-coated CS-GA film (CS-GA-PC) through a heterogeneous reaction process. The spectroscopic and contact angle characterization show that a cell outer membrane mimetic structure was formed on the cross-linked chitosan surface, and the significantly improved hemocompatibility of the modified surface was shown by a suppression of 94% on platelet adhesion, a suppression of 60–70% for bovine plasma fibrinogen and bovine serum albumin adsorptions. These results demonstrated that this cell outer membrane mimetic surface modification with phosphorylcholine dichloride is a promising strategy to improve the hemocompatibility of chitosan.     

铅(Ⅱ)离子印迹复合膜的制备及其性能研究

以聚丙烯微孔膜(MPPM)为支撑,采用共价表面修饰和离子印迹技术,制备了Pb(Ⅱ)离子印迹复合膜.首先通过紫外光引发丙烯酸接枝聚合,在MPPM表面引入羧基;然后基于羧基和氨基的反应,将壳聚糖共价接枝到MPPM表面;再以Pb(Ⅱ)为模板离子、环氧氯丙烷为交联剂,通过配位键作用形成离子印迹位点.制备过程通过ATR-FTIR和XPS分析得到了证实.利用扫描电子显微镜(SEM)-能量色散X射线光谱仪(EDX)对膜表面及截面的形貌及元素分布进行了分析.静态水接触角和纯水通量实验结果显示,印迹复合膜具有良好的表面亲水性和渗透性,在离子印迹聚合物接枝率为174.4μg/cm2时,水通量高达2659±58 L/(m2.h).印迹复合膜对Pb(Ⅱ)离子的吸附亲和性和渗透选择性分别通过平衡结合实验和竞争渗透实验进行评价.与非印迹复合膜相比,印迹复合膜对Pb(Ⅱ)离子展现出更强的吸附亲和性,更快的吸附速率及更好的渗透选择性,以Cu(Ⅱ)和Zn(Ⅱ)作为竞争离子,其渗透选择性因子分别为3.43和3.93.     

Novel hydrogel membrane based on copoly(hydroxyethyl methacrylate/p-vinylbenzyl-poly(ethylene oxide)) for biomedical applications: properties and drug release characteristics

The aim of this study was to synthesize and characterize a novel biocompatible polymeric membrane system and demonstrate its potential use in various biomedical applications. Synthetic hydrogels based on poly(hydroxyethyl methacrylate), poly(HEMA), have been widely studied and used in biomedical fields. A novel copolymer hydrogel was prepared in the membrane form using 2-hydroxyethyl methacrylate monomer (HEMA) and a macromonomer p-vinylbenzyl-poly(ethylene oxide) (V-PEO) via photoinitiated polymerization. A series of poly(HEMA/V-PEO) copolymer membranes with different compositions was prepared. The membranes were characterized using infrared, thermal and SEM analysis. The thermal stabilities of the copolymer membranes were found to be lowered by an increase in the ratio of macromonomer (V-PEO) in the membrane structure. Because of the incorporation of PEO segments, the copolymers exhibited significantly higher hydrophilic surface properties than pure poly(HEMA), as demonstrated by contact angle measurements. Equilibrium swelling studies were conducted to investigate the swelling behavior of the membranes. The equilibrium water uptake was reached in about 4 h. Moreover, the blood protein adsorption and platelet adhesion were significantly reduced on the surface of the PEO containing copolymer membranes compared to control pure poly(HEMA). Drug release experiments were performed in a continuous release system using model drug (vancomycin) loaded copoly(HEMA/V-PEO) membranes. A specific poly(HEMA/V-PEO) membrane formulation possessing the highest PEO content (with a HEMA:V-PEO (mmol:mmol) feed ratio of 112:1 and loaded with 40 mg antibiotic/g polymer) released about 81% of the total loaded drug in 24 h at pH 7.4. This membrane composition provided the best results and can be considered as a potential candidate for a transdermal antibiotic carrier and various biomedical and biotechnological applications.     

Immobilization of bovine serum albumin onto porous polyethylene membranes using strongly attached polydopamine as a spacer

Based on the self-polymerization and strong adhesion characteristics of dopamine in aqueous solution, a novel and convenient approach was developed to immobilize protein onto porous polyethylene (PE) membranes. A thin polydopamine (pDA) layer was formed and tightly coated onto PE membrane by dipping simply the membrane into dopamine aqueous solution for a period of time. Subsequently, bovine serum albumin (BSA) was bound onto the obtained PE/pDA composite membranes via the coupling between BSA and the reactive polydopamine layer. The firm immobilization of polydopamine layer and BSA was verified by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The results of water contact angle measurement showed that the hydrophilicity of PE membrane was significantly improved after coating polydopamine and binding BSA. The experiments of blood platelet adhesion indicated that BSA-immobilized PE membrane had better blood compatibility than the unmodified PE and the PE/pDA composite membranes. The investigations on hepatocyte cultures and cell viability revealed that the polydopamine coating endowed PE membrane with significantly improved cell compatibility. Compared to BSA surface, polydopamine surface is more favorable for cell adhesion, growth, and proliferation.