甲基丙烯酸甲酯在环烷酸钕—三异丁基铝α,α‘—联吡啶催化体系中聚？…

自６０年代以来,Ｚｉｅｇｌｅｒ型催化剂用于极性单体甲基丙烯酸甲酯（ＭＭＡ）的聚合研究较多,如由钛、矾、铁等过渡金属化合物与烷基铝组成的催化剂［１～３］．近年来出现了锆、稀土配位催化聚合ＭＭＡ及其他丙烯酸酯的报道［４～６］,这些催化剂引发ＭＭＡ聚合机理相当复杂,有的为自由基型,有的则为配位阴离子型．本文报道极性单体ＭＭＡ在环烷酸钕三异丁基铝α,α’联吡啶体系中的聚合特征和聚合反应动力学,并初步探讨了反应机理．１　原料及试剂甲基丙烯酸甲酯为化学纯,按常法纯制．苯、甲苯、四氢呋喃、石油醚、环己烷…     

甲基丙烯酸丁酯和苯乙烯的原子转移自由基嵌段共聚

活性聚合以其无链转移、无链终止和引发速度远大于增长速率的特点,应用于合成单分散聚合物、预定序列结构的嵌段共聚物等．常用的活性聚合方法如阴离子聚合、阳离子聚合及基团转移聚合对反应条件要求苛刻,不能用于丙烯酸酯类极性单体和苯乙烯类非极性单体的嵌段共聚．与...     

基团转移嵌段共聚规律研究

基团转移嵌段共聚规律研究夏海平，丁马太，陈萍，郭舰，刘昆棱（厦门大学化学系，３６１００５）基团转移聚合（ＧＴＰ）￣［１］是８０年代出现的新型聚合方法。常用的ＧＴＰ单体主要有三类：甲基丙烯酸酯类、丙烯酸酯类及丙烯腈。由于ＧＴＰ能使某些单体在室温下进行“...     

甲基丙烯酸酯和丙烯酸酯基团转移共聚的竞聚率

甲基丙烯酸酯和丙烯酸酯基团转移共聚的竞聚率邹友思郭金全戴李宗潘容华（厦门大学化工系，厦门，３６１００５）基团转移聚合是制备极性单体的嵌段或无规共聚物的有效方法。如用甲基丙烯酸甲酯（ＭＭＡ）和丙烯酸丁酯（ＢＡ）进行嵌段共聚，可制得热塑性弹性体［１...     

甲基丙烯酸丁酯和苯乙烯的原子转移自由基共聚

研究了甲基丙烯酸丁酯和苯乙烯两种不同极性单体的原子转移自由基嵌段共聚和无规共聚，得到了实测分子量与理论分子量相近、分子量分布较窄的嵌段共聚物和无规共聚物。聚合过程中分子量和单体转化率成比例增加，多分散性指数变化不大。用＾１Ｈ ＮＭＲ法测定共聚组成，Ｋdisplay status     

萘酰亚胺类共聚色素的合成

以６－溴－１Ｈ，３Ｈ－萘并［１，８－ｃｄ］吡喃－１，３－二酮为原料，经亚胺化、Ｕｌｍａｍｎ缩合后与丙烯酰氯酯化得到具有荧光的可聚合单体６－（Ｎ－丙烯酰氧乙基）氨基－２－（２ ’，４ ’－Ｎ，Ｎ－二甲基）苯基－１Ｈ－苯并［ｄｅ］异喹啉－１，３（２Ｈ）－二酮，它与甲基丙烯酸甲酯经自由基共聚得到具有强烈荧光的聚合色素。     

甲基丙烯酸丁酯和苯乙烯的原子转移自由基共聚

研究了甲基丙烯酸丁酯（ＢＭＡ）和苯乙烯（Ｓ）这两种不同极性单体的原子转移自由基嵌段共聚和无规共聚,得到了实测分子量与理论分子量相近,分子量分布较窄的嵌段共聚物和无规共聚物．聚合过程中分子量和单体转化率成比例增加,多分散性指数变化不大．用１Ｈ ＮＭＲ法测定共聚组成,Ｋｅｌｅｎ Ｔｕｄｏｓ法计算竞聚率．得到ｒＳｔ＝０９１,ｒＢＭＡ＝０３２．     

甲基丙烯酸酯的基团转移嵌段共聚研究

甲基丙烯酸酯的基团转移嵌段共聚研究戴李宗邹友思陈良坦潘容华（厦门大学化学系厦门３６１００５）关键词基团转移聚合，甲基丙烯酸酯，嵌段共聚物，结构表征基团转移聚合［１］（ＧｒｏｕｐＴｒａｎｓｆｅｒＰｏｌｙｍｅｒｉｚａｔｉｏｎ，ＧＴＰ）具有活性聚合的特点...     

主链光学活性ω-十一烯酸-一氧化碳共聚物的合成与表征

阳离子钯Pd(Ⅱ)催化的一氧化碳与烯烃均相共聚近几年来已引起了广泛的关注［1～3］, 其主要原因是: (1)一氧化碳价廉易得; (2)产物聚酮具有潜在的光降解和生物降解性［4］; (3)聚酮的官能团羰基可以进一步衍生为其它官能团［5］. 使用前过渡金属(如Zr)催化剂, 采用均相催化对α-烯烃的有规聚合进行了广泛的研究［6,7］, 然而由于极性官能团可使前过渡金属催化剂中毒失活, 所以使用前过渡金属催化剂进行官能团烯烃聚合研究的实例很少［8］.     

丙烯腈和甲基丙烯酸酯基团转移共聚的竞聚率

丙烯腈和甲基丙烯酸酯基团转移共聚的竞聚率邹友思，郭金全，兰涛，戴李宗，潘容华（厦门大学化工系，厦门，３６１００５）关键词基团转移共聚．竞聚率．丙烯腈．甲基丙烯酸酯近年来对基团转移共聚竞聚率的研究较活跃［１～３］，一般认为甲基丙烯酸酯和丙烯酸酯两类单体...     

CONTROLLED SEQUENTIAL AND RANDOM RADICAL COPOLYMERIZATION OF STYRENE AND BUTYL METHACRYLATE BY ATOM TRANSFER RADICAL POLYMERIZATION

Diblock copolymers containing polystyrene(PSt) and polybutyl methacrylate(PBMA) segments and random copolymer of styrene (St) and butyl methacrylate(BMA) have been prepared by atom transfer radical polymerization (ATRP).Diblock copolymers of BMA and St with predetermined molecular weight(1×10^4-6.5×10^4) and narrower molecular weight distribution(1.25-1.5) were obtained.The random copolymer compositions were determined by ^1HNMR spectroscopy and the reactivity ratios were evaluated by the extended Kelen-Tudos method to be YSt=0.91,YBMA=0.32.     

ATRP合成大分子单体法制备核壳结构微球

以α-溴代丙酸乙酯(EPN-Br)为引发剂, N,N, N′,N″,N″-五甲基二亚乙基三胺(PMDETA)为配体,使甲基丙烯酸叔丁酯进行原子转移自由基聚合,合成了端基带溴原子的聚甲基丙烯酸叔丁酯(PtBMA-Br)大分子中间体,通过其与甲基丙烯酸的亲核取代反应,得到了末端C=C双键含量高的大分子单体（MAA-PtBMA）,其相对分子质量可控制在5400-12000g/mol的范围内,分子量分布≤1.20。以偶氮二异丁腈为自由基引发剂,在乙醇中使MAA-PtBMA大分子单体与苯乙烯（St）进行分散共聚,制得了甲基丙烯酸叔丁酯接枝聚苯乙烯（PtBMA-g-PSt）微米级共聚微球,该微球具有核壳结构。     

不饱和环缩醛与苯乙烯的原子转移自由基共聚合反应

不饱和环状单体与烯类单体共聚所得的共聚物 ,已经或正在开发成一系列新的产品 .例如 ,水解后得到末端带有—OH,— SH,—COOH等官能团的聚苯乙烯、聚乙烯、聚甲基丙烯酸甲酯等的低聚物[1] ,用于制备新型聚酯和聚氨酯 ;与乙烯的共聚物可在细菌作用下彻底分解成脂肪酸或醇 ,可赋予聚合物生物降解活性 ;与双甲基丙烯酸酯等的共混物 ,可用于制作高强度补牙材料[2 ] 等 .以前报道的不饱和环状单体与烯类单体的共聚反应 ,均为无规共聚 ,而且是普通自由基引发聚合 ,不能控制分子量 ,分子量分布很宽 .原子转移自由基聚合是近几年发展起来的实现…     

Model‐based design and synthesis of gradient MMA/tBMA copolymers by computer‐programmed semibatch atom transfer radical copolymerization

Methyl methacrylate (MMA)/tert‐butyl methacrylate (tBMA) gradient copolymers having linear and hyperbolic composition profiles were synthesized. These special copolymer products were achieved via a model‐based computer‐controlled semibatch atom transfer radical copolymerization (ATRcoP) process. A simple ATRcoP model was developed based on the terminal model. The equilibrium constants in the ATRP of MMA and tBMA were estimated by the data correlation. The model was verified by batch experiments and was found to give good correlation for the polymerization rate, molecular weight, and copolymer composition data. The model coupled with a reactor model was then applied to the semibatch ATRcoP and was used to calculate comonomer feeding rates for the targeted gradient composition profiles. It was found that the experimental monomer conversion, molecular weight, and cumulative copolymer composition were in good agreement with their targeted theoretical values. The gradient copolymers had low polydispersities close to 1.1. This work demonstrated the feasibility of the model‐based semibatch ATRcoP in fine‐tuning gradient copolymer composition profiles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 69–79, 2009     

Cylindrical molecular brushes with a loose grafting density

A cylindrical molecular brush with a low graft density was synthesized by two steps. Firstly, free radical alternating copolymerization of styrene (St) and N‐[2‐(2‐bromoisobutyryloxy)ethyl] maleimide (BiBEMI) gave a macroinitiator where pendant initiating sites for atom transfer radical polymerization (ATRP) being positioned along the backbone with an interval of four C? C bonds. The backbone‐to‐be with an alternating sequence was verified by elemental analysis (EA). Secondly, grafting poly(tert‐butyl acrylate) chains from the macroinitiator by ATRP produced the novel molecular brush. Size exclusion chromatography, static light scattering (SLS), and ¹H NMR and atomic force microscopy (AFM) were used to characterize the macroinitiator and the molecular brush. The results show that the backbone contains an average 730 repeat units (1 repeat unit = a pair of St and BiBEMI) and the absolute molecular weight of the brush, M_w,SLS, was 4.88 × 10⁶ Da. The brush reveals a number average length L_n to be 96 nm under AFM observation on carbon coated mica, corresponding to the length per main chain monomer unit (L_unit) of 0.066 nm, indicating a less extended conformation due to the low grafting density. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5527–5533, 2009     

“Living”/controlled radical copolymerization of N-phenylmaleimide and styrene using Fréchet-type dendritic initiators

Polyarylether dendrons as macroinitiators for the "living"/controlled free radical copoly-merization of N-phenylmaleimide (PhMI) and styrene (St) have been demonstrated. The copoly-merization was carried out in bulk or anisole with CuBr/bipy catalyst at 100-130℃. It is found that the resulting copolymers possess predetermined molecular weights and narrower polydispersities (1.18 < Mw/Mn<1.32). The effects of reaction temperature and monomer feed on the copolymeri-zation kinetics were investigated in detail. By using the Fineman-Ross method, the apparent monomer reactivity ratios for the atom transfer radical copolymerization of PhMI and St were determined to be rphM1 = 0.0207, and rst = 0.0484, respectively.     

Three‐Arm Star Homo‐ and Block Co‐Polymers Via Atom Transfer Radical Polymerization

Star homopolymers of some vinyl monomers such as methyl methacrylate, n‐butyl methacrylate and styrene (MMA, nBMA, St.) were prepared by using a N,N,N′N′‐tetramethylethylenediamine ligand/CuBr catalytic system via atom transfer radical polymerization (ATRP). A three armed benzene based core was successfully used as initiator. Low polydispersities and regular molecular weight values were obtained in most cases, especially at low conversions. MMA and BMA showed comparable behavior where controlled and true ATRP was observed even at high conversions. However, styrene monomer recorded irregular high polydispersities at high conversions in spite of the relatively low molecular weight values. Some block copolymers were obtained using MMA homopolymer as macroinitiator with the same strategy of ATRP. ¹H‐NMR confirmed the structures of the resulting polymers. Transmission electron microscopy (TEM) proved the nano‐structure of the star polymers. The thermal behavior of the MMA star homo and copolymers was studied. The effect of the star shape on thermal behavior was very clear with respect to the linear ones.     

原子转移自由基聚合合成甲基丙烯酸丁酯与丙烯酸全氟烷基乙酯两嵌段共聚物及其性能的研究

通过原子转移聚合合成了大分子引发剂PBMA Br及系列含氟两嵌段共聚物P(BMA b FAEM) ,并利用1 H NMR、F EA、GPC、FTIR对其结构进行了表征 .所合成的含氟嵌段共聚物膜具有低临界表面张力 .本文通过接触角的测定研究了含氟两嵌段共聚物的憎水、憎油性能与共聚物的含氟量 ,热处理温度 ,热处理时间的关系 ,结果表明含氟嵌段PFAEM具有向空气 聚合物界面富集的倾向 ,在共聚物中引入含氟嵌段可以明显提高共聚物的憎水、憎油性 .当含氟嵌段达 7 6wt%时 ,临界表面张力 (γc =18 7mN m)已与聚四氟乙烯相当 (γc=18 5mN m) ,显示出明显的低表面能特征     

原子转移自由基聚合制备聚酯二元醇接枝聚苯乙烯

聚酯二元醇经氯甲基化制备了聚酯二元醇大分子引发剂,通过原子转移自由基聚合技术,合成了聚酯二元醇－ｇ－聚苯乙烯接枝聚合物。用＾１Ｈ－ＮＭＲ、ＦＴ－ＩＲ和ＧＰＣ表征了接枝聚合物,结果表明分子量与转化率呈线性关系,且分子量分布较窄,接枝聚合反应是一个可控过程。