Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

K3SbSe3, Rb3SbSe3 und Cs3SbSe3 – Synthese und Kristallstruktur

K₃SbSe₃, Rb₃SbSe₃, and Cs₃SbSe₃ – Synthesis and Crystal Structure The compounds K₃SbSe₃, Rb₃SbSe₃ and Cs₃SbSe₃ were synthesized by heating mixtures of Sb₂O₃ and an alkalicarbonate in a stream of hydrogen saturated by selenium in a temperature range between 750 °C and 800 °C. The compounds crystallize isostructural with Na₃AsS₃. A comparison of atomic distances and bond angles with those of the isostructural arsenic and bismuth compounds shows the effect of lone pairs.     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

Hydrocarbon species mu3-CCH2-, mu3-CCH3 and mu-CHCH3 supported on Ti3O3

Treatment of the mu3-ethylidyne complex [{TiCp*(mu-O)}3(mu3-CMe)](1), (Cp*=eta5-C5Me5) with alkali metal amides leads to the oxoheterometallocubane derivatives [M(mu3-O)3{(TiCp*)3(mu3-CCH2)}] [M = Li (2), Na (3), K (4), Rb (5), Cs (6)] containing the naked carbanion mu3-CCH2-; the addition of triphenylmethanol and tert-butanol to the compounds 2-6 gives rise to the oxoderivatives [{TiCp*(mu-O)}3(mu-CHMe)(OCR3)][R = Me (7), Ph (8)] which show a mu-ethylidene bridge on the surface model Ti3O3.     

K3BiSe3, Rb3BiSe3 und Cs3BiSe3 – Substitutionsvarianten des Th3P4-Typs

K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ – Derivatives of the Th₃P₄ Structure Type The compounds K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ were synthesized by heating mixtures of Bi₂O₃ and the respective alkalicarbonate in a stream of hydrogen saturated by selenium at 850°C. Thin crystals of the compounds appear red in transmitted light. They crystallize isostructural with Na₃AsS₃, space group P2₁3, lattice constants a = 9.771(5) Å, a = 10.161(3) Å, and a = 10.587(5) Å for K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃, respectively. The Na₃AsS₃ structure type is a derivative of the Th₃P₄ structure type.     

Die Akzeptoreigenschaften von AsCl3, AsBr3, asJ3, SbCl3, SbBr3 und SbJ3

Zusammenfassung Es wurden die Enthalpien der Reaktionen von AsCl₃, AsBr₃, AsJ₃, SbCl₃, SbBr₃ und SbJ₃ mit Tributylphosphat, N,N-Dimethylacetamid und Hexamethylphosphorsäuretriamid bestimmt. Das Verhalten der Addukte bei Gegenwart eines Überschusses der Donoren wird beschrieben.

---

Acceptor properties of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃, and SbI₃

The enthalpies of the reactions of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃ and SbI₃ with tributylphosphate, N,N-dimethylacetamide and hexamethylphosphoric acid triamide were measured. The behavior of the adducts in the presence of excess donor molecules is described.

---

---

Mit 5 Abbildungen     

Non-Isothermal Kinetics of the Decomposition Reaction of Cluster [Ag3WS3Br]（PPh3）3 and [Cu3WS3Br]（PPh3）3

The thermal behaviors of clusters [Ag3WS3Br](PPh3)3 and [Cu3WS3Br](PPh3)3 (PPh3=triphenyl phosphine) in a nitrogen atmosphere were studied under the non-isothermal conditions by simultaneous TG-DTG-DSC and EDS techniques. The results showed that the evolution of PPh3 generally proceeded before the release of the other moiety in one or two step-mode. The mechanisms, the kinetic and the thermodynamic parameters for decomposition of PPh3 of both clusters were determined and calculated by jointly using several methods, which showed that its evolution was controlled by Avrami-Erofeev equation. The results also showed that there was no new stable phase composed of W-Ag(Cu)-S-Br after release of organic moiety PPh3 and that CVD method was not applicable to their further processing.     

γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

Synthesis of some derivatives of 3-amino-3-desoxyerythrose and 3-amino-3-desoxy-D-3-erythrose

The synthesis of derivatives of 3-amino-3-deoxy-L-erythrose by LAH or LAD reduction of the oxime of 1,2-O-isopropylidene α-L -glycero-tetros-3-ulofuranose is described.     

Analysis of the intermolecular interactions between CH3OCH3, CF3OCH3, CF3OCF3, and CH2F2, CHF3

The intermolecular interaction energy curves of CH(3)OCH(3)-CH(2)F(2), CF(3)OCH(3)-CH(2)F(2), CF(3)OCF(3)-CH(2)F(2), CH(3)OCH(3)-CHF(3), CF(3)OCH(3)-CHF(3), and CF(3)OCF(3)-CHF(3) complexes were calculated by the MP2 level ab initio molecular orbital method using the 6-311G** basis set augmented with diffuse polarization functions. We investigate the fluorine substitution effects of both methane and dimethyl ether on intermolecular interactions. In addition, orientation dependence of intermolecular interaction energies is also studied with utilizing eight types of orientations. Our analyses demonstrate that partial fluorinations of methane make electrostatic interaction dominant, and consequently enhance attractive interaction at several specific orientations. On the contrary, fluorine substitutions of dimethyl ether substantially decrease the electrostatic interaction between ether and CH(2)F(2) or CHF(3); thus, there is no such characteristic interaction between the C-H of fluorinated methane and ether oxygen of CF(3)OCF(3) as conventional hydrogen bonding, due to reduced polarity of fluorinated ether. The combination of different pairs of the electrostatic interaction is therefore responsible for the intermolecular interaction differences among the complexes investigated herein and also their orientations.     

Addition of NH3 to Al3O3-

Recent computational studies on the addition of ammonia (NH3) to the Al3O3- cluster anion [A. Guevara-Garcia, A. Martinez, and J. V. Ortiz, J. Chem. Phys. 122, 214309 (2005)] have motivated experimental and additional computational studies, reported here. Al3O3- is observed to react with a single NH3 molecule to form the Al3O3NH3- ion in mass spectrometric studies. This is in contrast to similarly performed studies with water, in which the Al3O5H4- product was highly favored. However, the anion PE spectrum of the ammoniated species is very similar to that of Al3O4H2-. The adiabatic electron affinity of Al3O3NH3 is determined to be 2.35(5) eV. Based on comparison between the spectra and calculated electron affinities, it appears that NH3 adds dissociatively to Al3O3-, suggesting that the time for the Al3O3-NH3 complex to either overcome or tunnel through the barrier to proton transfer (which is higher for NH3 than for water) is short relative to the time for collisional cooling in the experiment.     

钙钛矿CH3NH3PbI3晶体的电化学

电化学方波伏安及循环伏安测量表明,钙钛矿CH₃NH₃PbI₃晶体在有机电解质中的氧化还原过程伴随着化学降解。该化学降解源于CH₃NH₃PbI₃晶体中铅离子的还原以及碘离子的氧化。通过电化学伏安法可以测定晶体的能带。     

Beam-foil lifetime data for 3s 3p 3 and 3s 2 3p 3d levels of Si-like Ni14+

In the EUV spectrum of foil-excited 24 MeV Ni ions the decays of the 3s 3p ³ and 3s ² 3p 3d levels to the 3s ² 3p ² levels of the ground configuration have been observed. For most of the levels decay curves have been obtained. The lifetime results compare well with predictions from semi-empirically scaled HXR calculations. Some problems with cascade repopulations will be discussed.     

Die Perthioborate RbBS3, TIBS3 und TI3B3S10

The Perthioborates RbBS₃, TIBS₃, and Tl₃B₃S₁₀ . RbBS₃ (P2₁/c, a=7.082(2) Å, b=11.863(4) Å, c=5.794(2) Å, β=106.54(2)°) was prepared as colourless, plate-shaped crystals by reaction of stoichiometric amounts of rubidium sulfide, boron, and sulfur at 600°C and subsequent annealing. TlBS₃ (P2₁/c, a=6.874(3) Å, b=11.739(3) Å, c=5.775(2) Å, β=113.08(2)°) which is isotypic with RbBS₃ was synthesized from a sample of the composition Tl₂S · 2 B₂S₃. The glassy product which was obtained after 7 h at 850°C was annealed in a two zone furnace for 400 h at 400→350°C. Yellow crystals of TlBS₃ formed at the warmer side of the furnace. Tl₃B₃S₁₀ (P1 , a=6.828(2) Å, b=7.713(2) Å, c=13.769(5) Å, α=104.32(2)°, β=94.03(3)°, γ=94.69(2)°) was prepared as yellow plates from stoichiometric amounts of thallium sulfide, boron, and sulfur at 850°C and subsequent annealing. All compounds contain tetrahedrally coordinated boron. The crystal structures consist of polymeric anion chains. In the case of RbBS₃ and TlBS₃ nonplanar five-membered B₂S₃ rings are spirocyclically connected via the boron atoms. To obtain the anionic structure of Tl₃B₃S₁₀ every third B₂S₃ ring of the polymeric chains of MBS₃ is to be substituted by a six-membered B(S₂)₂B ring.     

KMgF3:Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce3+→Tb3+的发光特性以及它们之间的相互作用,结果表明KMgF3:Ce3+Tb3+纳米粒子中存在Ce3+→Tb3+的能量传递过程,即Ce3+可以将吸收的能量直接传递给Tb3+离子,使得Tb3+的绿色发光强度大为增加.     

Syntheses and Crystal Structures of the Novel Ternary Thioborates Na3BS3, K3BS3, and Rb3BS3

The orthothioborates Na₃BS₃, K₃BS₃ and Rb₃BS₃ were prepared from the metal sulfides, amorphous boron and sulfur in solid state reactions at temperatures between 923 and 973 K. In a systematic study on the structural cation influence on this type of ternary compounds, the crystal structures were determined by single crystal X‐ray diffraction experiments. Na₃BS₃ crystallizes in the monoclinic space group C2/c (No. 15) with a = 11.853(14) Å, b = 6.664(10) Å, c = 8.406(10) Å, β = 118.18(2)° and Z = 4. K₃BS₃ and Rb₃BS₃ are monoclinic, space group P2₁/c (No. 14) with a = 10.061(3) Å, b = 6.210(2) Å, c = 12.538(3) Å, β = 112.97(2) and a = 10.215(3) Å, b = 6.407(1) Å, c = 13.069(6) Å, β = 103.64(5)°, Z = 4. The potassium and rubidium compounds are not isotypic. All three compounds contain isolated [BS₃]^3– anions with boron in a trigonal‐planar coordination. The sodium cations in Na₃BS₃ are located between layers of orthothioborate anions, in the case of K₃BS₃ and Rb₃BS₃ stacks of [BS₃]^3– entities are connected via the corresponding cations. X‐ray powder patterns were measured and compared to calculated ones obtained from single crystal X‐ray structure determinations.     

Phosphine-ligated induced formation of thallium(I) full Pt3TlPt3 sandwich versus "open-face" TlPt3 sandwich with triangular Pt3(mu2-CO)3(PR3)3 units: synthesis and structural/spectroscopic analysis of triphenylphosphine [(mu3-Tl)Pt3(mu2-CO)3(PPh3)3]+ and its (mu3-AuPPh3)Pt3 analogue

This research constitutes an operational test to assess the influence of platinum-attached phosphine ligands in the formation process of "open-face" TlPt3 or "full" Pt3TlPt3 sandwich clusters. Accordingly, the reaction of TlPF6 with triphenylphosphine Pt4(mu2-CO)5(PPh3)4, under essentially identical boundary conditions originally used to prepare (90% yield) the triethylphosphine "full" Pt3TlPt3 sandwich, [(mu6-Tl)Pt6(mu2-CO)6(PEt3)6]+ (3) ([PF6]- salt), from Pt4(mu2-CO)5(PEt3)4 was carried out to see whether it would likewise afford the unknown triphenylphosphine Pt3TlPt3 sandwich analogue of or whether the change of phosphine ligands from sterically smaller, more basic PEt3 to PPh3 would cause the product to be the corresponding unknown triphenylphosphine "open-face" TlPt3 sandwich that would geometrically resemble the known bulky tricyclohexylphosphine [(mu3-Tl)Pt3(mu2-CO)3(PCy3)3]+ sandwich (2a). Both the structure and composition of the resulting "open-face" sandwich product, [(mu3-Tl)Pt3(mu2-CO)3(PPh3)3]+ (1a) ([PF6]- salt), were unequivocally established from a low-temperature CCD X-ray crystallographic determination. The calculated Pt/Tl atom ratio (3/1) of 75%/25% is in excellent agreement with that of 72(3)%/28(5)% obtained from energy-resolved measurements on a single crystal with a scanning electron microscope. Crystals (80% yield) of the orange-red were characterized by solid-state/solution IR and variable temperature 205Tl and 31P{1H} NMR spectra; the 31P{1H} spectra provide convincing evidence that is exhibiting dynamic behavior at room temperature in CDCl3 solution. The corresponding new "open-face" (mu3-AuPPh3)Pt3 sandwich, [(mu3-AuPPh3)Pt3(mu2-CO)3(PPh3)3]+ (1b) ([PF6]- salt), was quantitatively obtained from by reaction with AuPPh3Cl and spectroscopically characterized by IR and 31P{1H} NMR spectra. A comparative geometrical evaluation of the observed steric dispositions of the platinum-attached PR3 ligands in the "open-face" (mu3-Tl)Pt3 sandwiches of (with PPh3) and the known (with PCy3) and in the known "full" Pt3TlPt3 sandwich of (with PEt3) along with the considerably different observed steric dispositions of the PR(3) ligands in the known "open-face" (mu3-AuPCy3)Pt3 sandwich of (with PCy3) and in the known "full" Pt3AuPt3 sandwich of (with PPh(3)) has been performed. The results clearly indicate that, in contradistinction to the known triphenylphosphine Pt3AuPt3 sandwich of , PPh3 and bulkier PCy3 ligands of Pt3(mu2-CO)3(PR3)3 units are sterically too large to form "full" Pt3TlPt3 sandwiches. In other words, the nature of the thallium(I) sandwich-product in these reactions is sterically controlled by size effects of the phosphine ligands. Comparative examination of bridging carbonyl IR frequencies of and with those of closely related "open-face" and "full" sandwiches provides better insight concerning the relative electrophilic capacities of Tl+, Au+, and [AuPR3]+ components in forming sandwich adducts with Pt3(mu2-CO)3(PR3)3 nucleophiles.     

3-cyclobutyl-3-ferrocenylcyclopropene and 3-cyclobutylidene-3-ferrocenylpropyne Synthesis and chemical properties

3-Cyclobutyl-3-ferrocenylcyclopropene was synthesized by the reactions of mono- or dibromoferrocenylcyclopropanes with Bu^tOK in DMSO. Treatment of dibromoferro-cenylcyclopropane with Bu^tOK in THF afforded 3-cyclobutylidene-3-ferrocenylpropyne in 52% yield. Heterolysis of the C-C bond in the three-membered ring of 3-cyclobutyl-3-ferrocenylcyclopropene at low and high temperatures was studied. Hydrolysis yielded 3-cyclobutyl-1H-cyclopentaferrocene and products with linear structures,viz., 3-cyclobutylidene-3-ferrocenylpropene,E- andZ-I-ferrocenyl-1-cyclobutylpropenes, and 1-cyclobutylidene-1-ferrocenylacetone. Cyclopropene reacts with 1,3-diphenylisobenzofuran to form two Diels-Alder adducts, while the enyne does not react with 1,3-diphenylbenzofuran. Facultad de Quimica, Universidad Nacional Autónoma de México, Cd. Universitaria, C.P. 04510, México D. F., México. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2177–2181, November, 1999.     

3, 3, 3-Trifluoropropyl(methyl)cyclosiloxanes

The influence of the number of 3, 3, 3-trifluoropropyl(methyl)siloxane links (Φ/Φ) in the cyclotetrasiloxanes Φ_mD_4-m, where D represents the dimethylsiloxane link and m=0–4, on the rearrangement of these compounds in acetone solution under the action of sodium siloxanolate has been studied. The rearrangement takes place with the formation of a linear polysiloxane the degradation of which yields, in addition to the initial ring, cyclosiloxanes with a different structure. The rate of rearrangement of Φ_mD_4-m and of the formation of a linear polysiloxane rises with an increase in m from 0 to 3. The equilibrium concentration of the linear polysiloxane formed from Φ_mD_4-m is inversely proportional to m. Results have been obtained on the kinetics of the formation of the cyclosiloxanes Φ_mD_n, where m=0–5, n=0–5, and m+n=3–6, in the rearrangement of the rings ΦD₃, Φ₂D₂, Φ₃D, and Φ₄. The reactivity of the siloxane links rises in the sequence ～ (CH₃)₂Si-O-Si(CH₃)₂ ～<～ (CF₃CH₂CH₂)-(CH₃) Si-O-Si(CH₃)₂ ～<(CF₃CH₂CH₂) (CH₃)Si-O-Si(CH₃) (CH₂CH₂CF₃) ～. Because of the negative inductive effect transferred through the siloxane links, the 3, 3, 3-trifluoropropyl groups strongly activate the siloxane ring with respect to nucleophiiic reagents.     

Association rate constants for reactions between resonance-stabilized radicals: C3H3 + C3H3, C3H3 + C3H5, and C3H5 + C3H5

Reactions between resonance-stabilized radicals play an important role in combustion chemistry. The theoretical prediction of rate coefficients and product distributions for such reactions is complicated by the fact that the initial complex-formation steps and some dissociation steps are barrierless. In this paper direct variable reaction coordinate transition state theory (VRC-TST) is used to predict accurately the association rate constants for the self and cross reactions of propargyl and allyl radicals. For each reaction, a set of multifaceted dividing surfaces is used to account for the multiple possible addition channels. Because of their resonant nature the geometric relaxation of the radicals is important. Here, the effect of this relaxation is explicitly calculated with the UB3LYP/cc-pvdz method for each mutual orientation encountered in the configurational integrals over the transition state dividing surfaces. The final energies are obtained from CASPT2/cc-pvdz calculations with all pi-orbitals in the active space. Evaluations along the minimum energy path suggest that basis set corrections are negligible. The VRC-TST approach was also used to calculate the association rate constant and the corresponding number of states for the C(6)H(5) + H --> C(6)H(6) exit channel of the C(3)H(3) + C(3)H(3) reaction, which is also barrierless. For this reaction, the interaction energies were evaluated with the CASPT2(2e,2o)/cc-pvdz method and a 1-D correction is included on the basis of CAS+1+2+QC/aug-cc-pvtz calculations for the CH(3) + H reference system. For the C(3)H(3) + C(3)H(3) reaction, the VRC-TST results for the energy and angular momentum resolved numbers of states in the entrance channels and in the C(6)H(5) + H exit channel are incorporated in a master equation simulation to determine the temperature and pressure dependence of the phenomenological rate coefficients. The rate constants for the C(3)H(3) + C(3)H(3) and C(3)H(5) + C(3)H(5) self-reactions compare favorably with the available experimental data. To our knowledge there are no experimental rate data for the C(3)H(3) + C(3)H(5) reaction.