一段反应法制备宽/双峰聚乙烯催化剂的研究进展

阐述了采用一段反应法制备宽/双峰聚乙烯催化剂的研究开发进展,并根据催化剂的组成和结构,将催化体系归纳为复合催化剂和单组分催化剂.复合催化剂包括茂金属/Ziegler-Natta复合催化剂、不同茂金属复合催化剂、铬系/Ziegler-Natta复合催化剂、茂金属/后过渡金属复合催化剂、非茂单活性中心/茂金属复合催化剂、非茂单活性中心/Ziegler-Natta复合催化剂和不同后过渡金属复合催化剂.复合催化剂中多活性组分具有不同的链增长、链转移、链终止速率常数,从而在聚合反应中得到不同相对分子质量的聚合物,导致其相对分子质量分布加宽,因而复合催化剂可用于一段反应法制备宽/双峰聚乙烯.单组分催化剂包括单核茂金属催化剂、多核茂金属催化剂、后过渡金属催化剂及其它单组分催化剂.单组分催化剂可用于一段反应法制备宽/双峰聚乙烯,其催化机理是中心金属原子与主配体、辅配体、助催化剂、其它添加剂及载体形成了多种活性中心.     

碳纳米管负载Cu-Co复合氧化物的富氢气氛中CO催化消除

采用超声处理辅助浸渍法制备了多壁碳纳米管负载的Cu-Co复合氧化物催化剂. 利用XRD、TEM、H2-TPR、XPS和Raman光谱等表征了催化剂的结构性质. 在Cu和Co氧化物以及金属氧化物与碳纳米管载体间存在强相互作用. 催化剂在富氢气氛中CO催化消除反应中,与单一Cu或Co催化剂相比,Cu-Co复合氧化物催化剂表现出独特的反应特性,特别是在较高反应温度下可同时结合CO优先氧化和CO甲烷化的反应途径来实现高效CO消除. 当Cu/Co比为1/8时活性最优,可以实现在150-250℃和高反应空速 （120 L/（h·g））富氢气氛中CO的完全消除.     

稀土-碱土-过渡金属类钙钛石(A2BO4)复合氧化物催化剂的固态物化性质及对Nox 消除反应的催化性能

用柠檬酸络合法制备了多个系列的类钙钛石(A2BO4)结构的复合氧化物催化剂, 系统地研究探讨了该类催化剂的晶体与光谱结构、缺陷结构、对NO和CO等小分子的吸附性能、对氧的吸脱性能及氧化还原性能和稳定性, 同时考察了上述多个系列催化剂对NO直接分解和CO还原NO反应的催化性能. 发现Ni系A2BO4复合氧化物是NO直接分解的高活性催化体系, 特别是LaSrNiO4-λ催化剂具有很高NO的分解活性, 其活性高于文献报道Y-Ba-CuO/MgO的和Co系ABO3催化剂. 同时发现LaSrCuO4-λ具有较高的CO还原NO催化性能. 提出了在类钙钛石复合氧化物催化剂上NO分解和还原反应统一的氧化还原反应机制, 并比较了两个反应的异同点, 确认了氧空位在上述反应中的作用. 并较深入的探讨了取代效应、过渡元素、稀土元素和结构效应对NO分解和CO还原NO反应的影响机制. 本文分析总结了作者在类钙钛石(K2NiF4)结构复合氧化物的固态物化性质及对 Nox消除反应的催化性能方面的基础性研究结果.     

核壳结构Ziegler-Natta复合催化剂的制备及其乙烯聚合

采用溶胶-凝胶法,将聚(苯乙烯-co-丙烯酸)(PSA)膜材料和氯化镁的复合物包覆在以硅胶为载体的TiCl3催化剂上,负载TiCl4后制得Ziegler-Natta复合催化剂.采用红外光谱、激光粒度仪和扫描电镜对催化剂进行了表征,结果表明该复合催化剂呈核壳结构.同时,考察了复合催化剂中膜的厚度和反应中的氢气含量对催化剂的聚合活性和聚乙烯性能的影响,实验发现,膜厚约为3μm的核壳结构复合催化剂活性良好,其具有带诱导期的平稳型动力学曲线;膜厚1.5μm的复合催化剂的活性接近于实验所用的以硅胶为载体的TiCl3催化剂,且其具有相似的衰减型动力学曲线.研究同时表明,不同的膜厚能够调节复合催化剂的氢调性能及所得聚乙烯的分子量分布.     

Ba调变复合氧化物LaxBa1-xNiAl11O19-δ催化剂的制备和性能表征

制备了Ba调变Ni基复合氧化物催化剂LaxBa1-xNiAl11O19-δ,并通过XRD、XPS、TPR、TEM、BET和TGA等技术对催化剂的结构、性质和对甲烷二氧化碳重整制合成气反应的催化性能以及催化剂表面积炭情况进行了表征.结果表明,Ba调变后复合氧化物的微观结构随Ba调变量发生规律性变化,但结构的改变对催化剂的理化性质和催化性能均无明显影响,该系列Ni基复合氧化物都具有较好的催化活性以及较高的抗烧结和抗积炭性能,是甲烷二氧化碳重整制合成气反应选择氧化的良好催化剂.     

核壳结构Al2O3-TiO2脱硝催化剂的制备及性能研究

以核壳结构Al2 O3-TiO2为载体,V2 O5为活性组分,WO3为助催化剂,通过挤压成型制备核壳结构Al2 O3-TiO2复合载体脱硝催化剂.本文通过分析催化剂BET、XRD、抗压强度、抗硫酸盐腐蚀和脱硝反应NOx转化效率,考察核壳结构Al2 O3-TiO2复合脱硝催化剂物理化学性质.实验结果表明:核壳结构Al2 ...     

稀土复合氧化物Ln_2CuO_4催化苯酚羟化反应的研究

合成了K_2NiF_4结构的Ln_2CuO_4(Ln=La,Pr,Nd,Sm,Gd)类钙钛石型复合氧化物催化剂.研究了这些稀土取代的类钙钛石型复合氧化物的固态物理,化学性质.探讨了此类复合氧化物在苯酚羟化反应中的催化作用.考查了催化剂结构和组成与其苯酚羟化活性的关系,结果表明,在K_2NiF_4型复合氧化物中,A位稀土取代效应对复合氧化物的苯酚羟化催化活性有很大影响.     

BiVO4-MCM-41复合催化剂的制备及其对亚甲基蓝降解的光催化活性

将单斜白钨矿结构的BiVO4固载于中孔MCM-41分子筛上,制备了BiVO4-MCM-41复合催化剂,并对催化剂进行了表征,考察了催化剂在光催化亚甲基蓝降解反应中的催化活性.结果表明,BiVO4首先在MCM-41分子筛上形成锆石结构或四面体白钨矿结构的结晶,通过水热处理之后转变为单斜结构的结晶.BiVO4-MCM-41催化剂不仅保持了BiVO4较高的光催化活性,而且提高了对亚甲基蓝的吸附性能,从而提高了对亚甲基蓝降解反应的光催化活性.     

二甲醚水蒸气重整制氢的ZSM-5和Cu-Zn的复合催化体系

二甲醚水蒸气重整制氢反应是燃料电池理想的供氢方式之一.探讨了二甲醚水蒸气重整过程中的反应与反应、反应与传热的耦合协同效应.采用二甲醚水解催化剂ZSM-5(硅铝比为25)和甲醇水蒸气重整催化剂(Cu-Zn系列及商用Cu-Zn-Al催化剂)混合制得二甲醚水蒸气重整的复合催化剂.在固定床反应装置中评价了催化剂活性并对催化剂进行了透射电镜、X射线衍射及N2吸附表征.结果表明,复合催化剂的活性除了受催化剂组成和铜含量的影响外,还与Al和Zr的量有关.在Cu:Zn摩尔比为60:30时,Al和Zr的同时加入使催化剂中Cu晶粒分散最好,催化剂具有较高的低温活性,二甲醚在空速为4 922 ml/(g·h)和260℃下的转化率达到72%.     

Li-Ni-Y-O系复合氧化物催化剂上甲烷氧化偶联的研究

本文考察了用于甲烷氧化偶联反应的Li-Ni-Y-O系复合氧化物催化剂的组成、制备条件以及各反应条件对反应活性的影响,考察了催化剂的稳定性,并利用XRD对此系列催化剂进行了结构表征。     

Ag／TiO2复合纳米催化剂的制备和表征及其光催化活性

 采用光还原沉积贵金属法，制备了Ag／TiO2复合纳米催化剂．通过调节溶液的pH值控制TiO2表面负载银的形貌，利用AAS，XRD，TEM和XPS等手段对样品进行了表征．以苯胺氧化为模型反应，考察了Ag／TiO2复合纳米催化剂样品的光催化活性以及银沉积量和沉积形貌对催化剂活性的影响．结果表明，通过调控光还原沉积条件，可在平均粒径为24nm左右的TiO2颗粒上获得3nm左右均匀分散的银粒子；在TiO2上沉积适量的具有较高分散度的金属Ag，能有效提高TiO2对苯胺氧化反应的光催化活性．     

The effects of some operational parameters in photodegradation of benzylamine and aniline and their kinetics in aqueous suspension of TiO2 and Pt -loaded TiO2

Photocatalytic degradation of benzylamine and aniline on TiO2, Pt-modified TiO2, ZnO and ZnS in aqueous solution has been investigated. The degradation of the compounds follows a pseudo-first-order kinetics according to Langmuir-Hinshelwood model. The degradation process of benzylamine and aniline was evaluated by ninhydrin spectrophotometric method using UV-visible spectrophotometer in lambda(max) = 538 and 525 nm, respectively. The results showed the order of Pt/TiO2 > TiO2 > ZnO > ZnS for photocatalytic activity. In addition increasing of the Pt-loading was found to enhance the degradation rate of the compounds up to the optimal amount of 5 wt. % onto the surface of TiO2 so that the rates of degradation were increased about two times. Rate constants for photodegradation of benzylamine and aniline were found to be 1.4 x 10(-3) min(-1) and 0.7 x 10(-3) min(-1) for TiO2 as photocatalyst, while 2.7 x 10(-3) min(-1) and 1.7 x 10(-3) min(-1) for (5 wt.%) Pt/TiO2 as photocatalyst. Running the reactions in various pH (5-11), indicated that the pH = 8 and 10 or Higher are the optimum pH for photocatalytic degradation of benzylamine and aniline respectively. The effects of some other parameters such as amount of photocatalyst, flux of oxygen and irradiation time were evaluated. Furthermore, the Langmuir-Hinshelwood rate constant k(r) and adsorption constant K(A) for the titled compounds are reported.     

TiO2-WO3负载硅钨酸盐聚苯胺膜电极的电化学行为及电催化性能研究

用循环伏安法制备了金属氧化物(TiO2-WO3)负载硅钨酸盐聚苯胺膜修饰玻碳电极(PAn/SiW12/TiO2-WO3/GC),优化了聚合条件,并对该化学修饰电极的电化学行为,包括溶液pH值的影响和电极的稳定性等进行了研究。研究结果表明,此修饰电极聚合物膜不但保持了该杂多酸的电化学活性和电催化性能,又具有良好的稳定性。在0.5 mol/LH2SO4溶液中,该膜电极中的SiW12的第2个还原峰对BrO3-有很好电催化活性,催化过程符合EC平行催化机理。     

Kinetic and DFT studies on the Ag/TiO2-photocatalyzed selective reduction of nitrobenzene to aniline.

TiO2 particles loaded with silver nanoparticles with a mean diameter of 1.5 nm exhibit a high photocatalytic activity (84 % conversion after 1 h irradiation) for the reduction of nitrobenzene to aniline with 100 % selectivity in the presence of CH3OH (concentration=100 mM). High-resolution transmission electron microscopic studies of Pt-photodeposited Ag/TiO2 demonstrate that the Ag nanoparticles act as reduction sites in the photocatalytic reaction. Both spectroscopic measurements and density functional theory (DFT) calculations reveal that nitrobenzene is selectively adsorbed onto the Ag surfaces of Ag/TiO2 via partial electron transfer from Ag to nitrobenzene, whereas the interaction between aniline and Ag/TiO2 is weak. The kinetic analysis indicates that the recombination between the electrons flowing into the Ag nanoparticle and the holes left in the TiO2 valence band is significantly suppressed, particularly in the presence of CH3OH. The high activity and selectivity in the present Ag/TiO2-photocatalyzed reduction are rationalized in terms of the charge separation efficiency, the selective adsorption of the reactants on the catalyst surfaces, and the restriction of the product readsorption.     

Fabrication and characterization of core/shell structured TiO2/polyaniline nanocomposite

A novel core/shell structured TiO(2)/polyaniline nanocomposite was fabricated by grafting aniline on aminobenzoate monolayer that is chemically adsorbed on the TiO(2) nanocrystal surface. The formation and nanostructure of the nanocomposite were investigated by FT-IR and UV-Vis spectra, TEM, FE-SEM, and TG-DTA analysis. Adsorption of aminobenzoate on the TiO(2) surface is an effective method to obtain the uniform nanocomposite. The thickness of polyaniline layer coating on the TiO(2) nanocrystal surface can be controlled in a range of 2-5 nm by this method. A photoelectrochemical study was carried out on the TiO(2)/polyaniline nanocomposite, and found that polyaniline in the nanocomposite acted as a visible-light sensitizer in a photoelectrochemical reaction. The sensitization effect increased with increasing binding strength between polyaniline and TiO(2). A dye-sensitized solar cell with a short circuit current density of 0.19 mA/cm(2) and an open circuit voltage of 0.35 V was fabricated by using the TiO(2)/polyaniline nanocomposite film as a sensitized electrode.     

聚苯胺/聚苯乙烯复合Janus颗粒的制备

利用有机溶剂溶胀磺化聚苯乙烯@二氧化钛(SPS@TiO₂)核壳粒子制得二氧化钛/聚苯乙烯(TiO₂/PS)双面神(Janus)颗粒, 并在TiO₂端进行改性, 得到墨绿色的聚苯胺/聚苯乙烯(PANi/PS) Janus颗粒. 用扫描电子显微镜(SEM)、电子能谱(EDS)、元素分析、透射电子显微镜(TEM)、红外光谱(IR)、热重分析(TGA)、固体紫外-可见分析(UV-Vis)和四探针法考察Janus颗粒组成、微结构和Janus性质. 结果表明, Janus颗粒为雪人状结构, PS端的平均粒径为228 nm, PANi端的平均粒径从TiO₂的258 nm增大为295 nm; 并且在EDS谱上可以观察到N元素, 而未观察到Ti元素; 包覆的PANi的质量分数为23.7%. 掺杂后PANi/PS Janus颗粒的导电性能较好, 电导率为0.247 S/cm.     

Photocatalytic mineralisation of aniline derivatives in aquatic systems using semiconductor oxides

Photocatalytic degradation of aqueous solution of aniline derivatives such as ortho-nitroaniline (ONA), meta-nitroaniline (MNA), para-nitroaniline (PNA), 4-bromoaniline (4-BrA) and 2-chloroaniline (2-ClA) were carried out over ZnO or TiO2 (anatase and rutile) in a photocatalytic reactor. The observed results revealed that the order of photocatalytic activity for degradation of selected compound was ZnO > TiO2 (rutile) > TiO2 (anatase) with the ratio of the rate constants to the surface area of 3.2 x 10(-3), 1.9 x 10(-3) and 1.0 x 10(-3) respectively. The effect of some physical and chemical parameters such as amount of photocatalyst, pH, time of irradiation and solvent were studied. Degradation kinetic was according to Longmuir behaviour. Spectrophotometric methods and TOC analysis supported that aniline derivatives almost completely mineralized.     

Effects of calcium ions on solubility and aggregation behavior of an anionic sulfonate gemini surfactant in aqueous solutions

In this work, a ternary composite, Pt/TiO(2)/RGO (reduced graphite oxide), was prepared via immobilizing Pt particles onto the TiO(2)/RGO composite that was obtained via redox reaction of TiCl(3) and GO. The composite was characterized by different techniques including X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy. The TiO(2) particles with size less than 10 nm were uniformly distributed throughout the RGO, and almost each Pt particle with size around 3 nm adhered to TiO(2) particles, resulting in high dispersion of all Pt particles on the support. The Pt particles were in the electron-deficient state due to the strong interactions with the TiO(2) particles and the RGO support. The catalytic performance of the composite for nitrobenzene hydrogenation was investigated under solvent-free condition. It was indicated that the Pt/TiO(2)/RGO catalyst exhibited high activity with a turnover frequency (e.g., 59,000 h(-1)) as well as superior selectivity to aniline (e.g., >99%). Moreover, the catalyst can be reused for six times without any activity loss, which resulted from the stable structure of the catalyst.     

基于GM（1,1）的TiO2光催化降解苯胺的动力学研究

采用溶液浸渍法制备TiO2并将其担载到瓷砖上,通过添加过渡金属离子和H2O2,来考察对TiO2光催化降解苯胺的影响,其动力学过程利用GM（1,1）模型进行模拟.结果表明,添加Cu2＋、Mn2＋和Co2＋均能提高TiO2催化活性,且提高程度为Cu2＋〉Mn2＋〉Co2＋;掺杂Ni2＋反而降低其活性.H2O2能提高瓷砖固载...     

Impact of growth kinetics on morphology and pore structure of TiO2-one-pot synthesis of macroporous TiO2 microspheres

Titanium dioxide was synthesized by the hydrolysis of titanium tetraisopropoxide (TTIP) in the presence of acetic acid, 2-propanol, and organic amines (octylamine, aniline, and isobutylamine). H2O was supplied by an esterification reaction between acetic acid and 2-propanol (denoted as H2Oe), and/or by intentionally adding it (denoted as H2Oa). It was found that the quantity of H2Oa plays a crucial role in the morphology and porous structure of the final TiO2 product. Without the addition of H2Oa, 1D and porous TiO2 was synthesized. With the addition of H2Oa, and when the H2Oa:TiO2 molar ratio was in the range of 1:1 to 60:1, macroporous TiO2 microspheres possessing a large surface area and high thermal stability were obtained. When the H2Oa:TiO2 molar ratio exceeded 60:1, porous TiO2 with an irregular shape was formed. The variation in the morphology and porous structure is attributed to the manipulation of the growth kinetics by the addition of water.