Exciton tunnelling in ZnCdSe quantum well/CdSe quantum dots

Exciton tunnelling through a ZnSe barrier layer of various thicknesses is investigated in a Zn_0.72Cd_0.28Se/CdSe coupled quantum well/quantum dots (QW/QDs) structure using photoluminescence (PL) spectra and near resonant pump-probe technique. Fast exciton tunnelling from quantum well to quantum dots is observed by transient differential transmission. The tunnelling time is 1.8, 4.4 and 39 ps for barrier thickness of 10, 15 and 20 nm, respectively.     

Micro-photoluminescence study of electron-spin injection in self-assembled semiconductor quantum dots

We present a micro-photoluminescence (m-PL) study of electron-spin injection under magnetic fields in self-assembled semiconductor quantum dots (QDs) of CdSe. A characteristic band line-up of the CdSe QDs coupled with a diluted magnetic semiconductor quantum well (DMS-QW) of ZnCdMnSe through a ZnSe barrier layer enabled us to inject the electron spins from the DMS-QW into QDs. An experimental evidence of the electron-spin injection was provided by observations of circularly polarized m-PL spectra from individual QDs in this coupled QD structure. We find anti-correlation of PL intensity in between the DMS-QW (spin injector) and the individual QDs (spin receiver).     

Surface optical solitons in semiconductor quantum dot layers

A theory of optical solitons under the condition of nonlinear coherent interaction of surface TM-modes with a layer of inhomogeneously broadened semiconductor quantum dots is developed. Explicit analytical expressions for a surface soliton (2π-pulse) in the presence of single and biexciton transitions are obtained in the regime of self-induced transparency with realistic parameters which can be reached in current experiments.     

Surface optical solitons in semiconductor quantum dot layers

A theory of optical solitons under the condition of nonlinear coherent interaction of surface TM-modes with a layer of inhomogeneously broadened semiconductor quantum dots is developed. Explicit analytical expressions for a surface soliton (2π-pulse) in the presence of single and biexciton transitions are obtained in the regime of self-induced transparency with realistic parameters which can be reached in current experiments.     

Photoluminescence spectra of thin films containing CdSe/ZnS quantum dots irradiated by 532-nm laser radiation and gamma-rays

We have investigated temporal behavior of the photoluminescence (PL) spectra of thin films containing CdSe/ZnS quantum dots irradiated by 532 nm laser radiation and gamma-rays. Under ∼100 W/cm² laser radiation, the PL intensity (I_PL) increases with irradiation time upto about 500 s and thereafter declines linearly. The wavelength of the PL emission (λ_peak) exhibits a blue-shift with exposure time. Upon simultaneous irradiation by 100 W/cm² 532-nm laser, as well as 0.57 and 1.06 MeV gamma-rays, the temporal behaviors of both I_PL and λ_peak are significantly different; I_PL increases to a saturation level, and the magnitude of the blue-shift in λ_peak is reduced. We discuss possible mechanisms underlying these results.     

A comparison between optically active CdZnSe/ZnSe and CdZnSe/ZnBeSe self-assembled quantum dots: effect of beryllium

The composition and size of optically active Cd_xZn_1−xSe/ZnSe quantum dots are estimated with a previously developed method. The results are then compared with those obtained for Cd_xZn_1−xSe/Zn_0.97Be_0.03Se QDs. We show that introducing Be into the barrier material enhances both Cd composition and quantum size effect of optically active quantum dots.     

One-phonon-assisted resonant electron Raman scattering of GaAs quantum dots in an AlAs matrix

We have presented a theoretical calculation of the differential cross section (DCS) for the electron Raman scattering (ERS) process associated with the bulk-like longitudinal optical (LO) and interface optical (IO) phonon modes in semiconductor quantum dots (QDs). Electron states are considered to be confined within the QDs. We consider the Fröhlich electron-phonon interaction in the framework of the dielectric continuum approach. We study selection rules for the processes. Some singularities in the Raman spectra are found and interpreted. A discussion of the phonon behavior for QDs with large and small size is presented. The numerical results are also compared with that of experiments.     

Optical transition pathways in type-II Ga(As)Sb quantum dots

We present results of room temperature photoreflectance (PR) and photoluminescence (PL) measurements of molecular-beam epitaxy (MBE)-grown GaAsSb/GaAs quantum dot structures: one with an In_0.14Ga_0.86As capping quantum well and one without it. PL was used to determine the structures’ ground-state transition energies. This result was employed in an 8-band k·p Hamiltonian to achieve a band structure of the structures, which have different electron confinement. The dot emission energies suggest a large amount of As incorporation into the dots, which is due to enhanced adatom mixing at a higher than normal growth temperature of 510 °C. Our calculations indicate a dot composition of 25-50% Sb gives the best fit to experiment. This uncertainty in composition arises due to the fact that different bowing parameters of the ternary alloy could be applied in the calculations. The theoretical analysis accounts well for the main feature in the PR spectra of both samples.     

A comprehensive study of the effect of <Emphasis Type="Italic">in situ</Emphasis> annealing at high growth temperature on the morphological and optical properties of self-assembled InAs/GaAs QDs

We investigate the effect of in situ annealing during growth pause on the morphological and optical properties of self-assembled InAs/GaAs quantum dots (QDs). The islands were grown at different growth rates and having different monolayer coverage. The results were explained on the basis of atomic force microscopy (AFM) and photo-luminescence (PL) measurements. The studies show the occurrence of ripening-like phenomenon, observed in strained semiconductor system. Agglomeration of the self-assembled QDs takes place during dot pause leading to an equilibrium size distribution. The PL properties of the QDs are affected by the Indium desorption from the surface of the QDs during dot pause annealing at high growth temperature (520°C) subsiding the effect of the narrowing of the dot size distribution with growth pause. The samples having high monolayer coverage (3.4 ML) and grown at a slower growth rate (0.032 ML s⁻¹) manifested two different QD families. Among the islands the smaller are coherent defect-free in nature, whereas the larger dots are plastically relaxed and hence optically inactive. Indium desorption from the island surface during the in situ annealing and inhomogeneous morphology as the dots agglomerate during the growth pause, also affects the PL emission from these dot assemblies.     

Effect of annealing temperature on density of ZnO quantum dots

ZnO quantum dots (QDs) were fabricated on Si (001) substrates by pulsed laser deposition (PLD) and subsequent thermal annealing. X-ray diffraction and transmission electron microscopy analyses revealed that the ZnO QDs had polycrystalline hexagonal wurtzite structure. The size and density of ZnO QDs were investigated by atomic force microscopy. It has been found that the density decreased while the size increased with increasing annealing temperature. The analysis of size distribution of the dots shows an obvious bimodal mode according to scaling theory. The Raman spectrum shows a typical resonant multi-phonon form for the ZnO QDs. The collapse from the top of the dots was observed firstly after the samples were exposed in air for 30 days.     

Evolution of Luminescence with Shell's Thickness in Colloidal CdSe/CdS Core/Shell Quantum Dots

We synthesize colloidal CdSe/CdS core/shell quantum dots with different shell thicknesses, and there are five samples including CdSe core dots, and CdSe/CdS core/shell dots with 1-4 CdS layers. X-ray diffraction and Raman measurements indicate that the stress in CdSe core becomes stronger with the increasing shell thickness, and the optical measurements show that when the shell becomes thicker, the photoluminescence quantum yield is enhanced, and the radiative decay is also expedited. The temperature-dependent optical spectra are measured. The relation between the microstructure and the optical properties is discussed.     

Spatial weak infrared-light bright and dark solitons in semiconductor quantum-dot nanostructures

The formation of spatial weak infrared-light solitons through interband and intersubband transitions in semiconductor quantum dots (QDs) is theoretically investigated with feasible parameters. Our analysis is shown using GaAs-Al-GaAs QD structures that allow operation at communication wavelength. Such a three-level QD solid-state system for the infrared-light-soliton operation is much more practical than that in gaseous media as a result of its flexible design and the wide adjustable parameters and thus facilitate more practical applications in optical signal processing and telecommunication.     

Luminescence studies and formation mechanism of symmetrically dispersed ZnO quantum dots embedded in SiO2 matrix

Surface effects significantly influence the functionality of semiconductor nanocrystals. In the current work we present synthesis of ZnO quantum dots (QD) vis-a-vis symmetrically dispersed ZnO quantum dots embedded in SiO₂ matrix and discussed their optical properties to understand the role of the surface effects. These nanomaterials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), fourier transform infrared (FTIR), absorption (UV-visible) and photoluminescence (PL) spectroscopy. TEM studies confirm the formation of ZnO nanophosphors inside the SiO₂ matrix in highly symmetrical manner. These symmetrically dispersed ZnO@SiO₂ nanophosphors exhibited enhanced stable emission over uncoated sample and would permit the conjugation of the nanocrystals to biological entities after functionalization. Furthermore, the mechanism behind the formation of symmetrically dispersed ZnO quantum dots embedded in SiO₂ matrix was discussed in detail.     

Single-Photon Emission at Liquid Nitrogen Temperature from a Single InAs/GaAs Quantum Dot

We report on the single photon emission from single InAs/GaAs self-assembled Stranski-Krastanow quantum dots up to 80 K under pulsed and continuous wave excitations. At temperature 8OK, the second-order correlation function at zero time delay, g^（2）（0）, is measured to be 0.422 for pulsed excitation. At the same temperature under continuous wave excitation, the photon antibunching effect is observed. Thus, our experimental results demonstrate a promising potential application of self-assembled InAs/GaAs quantum dots in single photon emission at liquid nitrogen temperature.     

InSb quantum dots and quantum rings on InAs-rich surface

We report a study of InSb nanoobjects (quantum dots and quantum rings) grown on InAs-rich surface by liquid phase epitaxy. Characterization of the sample surface was performed using atomic force microscopy (AFM). The bimodal formation of the uncapped InSb quantum dots (QDs) was observed for the growing on a binary InAs substrate. Uniform high-density (1 × 10¹⁰ cm⁻²) quantum dots with a height of 3 nm were obtained at T = 420-430 °C, whereas low-density (5 × 10⁸ cm⁻²) big quantum dots were 9 nm in height. As a buffer layer, lattice-matched InAsSb_0.12P_0.25 solid solution was deposed on InAs substrate using metal-organic vapour phase epitaxy. Deposition from the InSb melt on the buffer layer resulted in the formation of InSb nanoobjects with density as high as 3 × 10¹⁰ cm⁻².     

Spin-orbit coupling and crystal-field splitting in the electronic and optical properties of nitride quantum dots with a wurtzite crystal structure

We present an sp ³ tight-binding model for the calculation of the electronic and optical properties of wurtzite semiconductor quantum dots (QDs). The tight-binding model takes into account strain, piezoelectricity, spin-orbit coupling and crystal-field splitting. Excitonic absorption spectra are calculated using the configuration interaction scheme. We study the electronic and optical properties of InN/GaN QDs and their dependence on structural properties, crystal-field splitting, and spin-orbit coupling.     

Optical spectra in the region of exciton resonances in quantum wells and quantum dots of In0.3Ga0.7As/GaAs heterostructures

The transparency, reflection and luminescence spectra of In_0.3Ga_0.7As structures with 8 nm thickness and quantum wells limited by the barrier layer GaAs of a 9 nm (upper layer) and 100 nm (bottom layer) thickness had been studied in the region of photon energy 0.5–1.6 eV. Lines associated with the transitions hh,lh1-e1(1s,2s,3s), hh2,lh2-e2(1s,2s,3s), hh1,lh1-e2(1s) and hh3,lh3-e3(1s) had been revealed in reflection spectra. The shapes of the reflection and transparency lines had been calculated using a single oscillator model of dispersion relations and the Kramers–Kronig integrals. The binding energy of hh,lh1-e1 excitons, the effective mass m_hh^∗ and m_lh^∗ and the damping factor for the optical transitions to QW and QD had been determined. The lifetime of charge carriers on quantum dots varies in the range of 0.04–0.1 ps, while the radiative lifetime of excitons in quantum wells in the considered structure is around 2 ps.     

Temperature Insensitivity of Optical Properties of InAs/GaAs Quantum Dots due to a Pregrown InGaAs Quantum Well

Both the peak position and linewidth in the photoluminescence spectrum of the InAs/GaAs quantum dots usually vary in an anomalous way with increasing temperature. Such anomalous optical behaviour is eliminated by inserting an In0.2Ga0.8As quantum well below the quantum dot layer in molecular beam epitaxy. The insensitivity of the photoluminescence spectra to temperature is explained in terms of the effective carrier redistribution between quantum dots through the In0.2Ga0.8As quantum well.     

Abnormal temperature dependence of photoluminescence from self-assembled InAs quantum dots covered by an InAlAs/InGaAs combination layer

In this report we have investigated the temperature dependence of photoluminescence (PL) from self-assembled InAs quantum dots (QDs) covered by an InAlAs/InGaAs combination layer. The ground state experiences an abnormal variation of PL linewidth from 15 K up to room temperature. Meanwhile, the PL integrated intensity ratio of the first excited state to the ground state for InAs QDs unexpectedly decreases with increasing temperature, which we attribute to the phonon bottleneck effect. We believe that these experimental results are closely related to the partially coupled quantum dots system and the large energy separation between the ground and the first excited states.