荷电膜的膜电位研究进展

膜电位的测定是表征荷电膜的传递现象的重要参数之一。本文简要介绍了膜电位理论基础,包括T. M. S.理论和不可逆热力学理论。分别阐述了关于离子交换膜、双极膜、两性膜以及复合膜的膜电位的最新进展,并提出今后的发展方向。     

Biosynthesis of the Purple Membrane of Halobacteria

Halobacteria are extremely specialized organisms. They live exclusively in saturated solutions of common salt. The cell membrane of these bacteria exhibit insular regions which can be isolated by membrane fractionation. These regions consist of a lipid matrix containing bateriorhodopsin molecules in a hexagonal crystalline arrangement. Bacteriorhodopsin is a deep purple retinal-protein complex (“purple membrane”). The purple membrane functions as a light energy converter.—How can such a differentiated membrane region arise? In vivo studies on the biosynthesis of the purple membrane showed another cell membrane fraction, the so-called brown membrane, to be a biosynthetic precursor. Bacterioopsin (the retinal-free protein) is initially incorporated into the brown membrane and can only form the purple membrane by crystallization in an energy-dependent reaction after prior reaction with retinal. This reaction is reversible. Removal of the retinal by formation of retinal oxime causes the purple membrane regions to disappear. Reconstitution of the bacteriorhodopsin by addition of retinal regenerates the purple membrane.     

膜技术的研究进展和应用前景

介绍了膜技术的现状、应用及发展。对膜材料的分类、膜反应机理和膜技术的应用进行了探讨,并提出了所面临的问题及对前景的展望。     

PVDF膜改性的方法研究

本文介绍了目前国内外聚偏氟乙烯(PVDF)超滤膜改性中常用的膜表面改性方法和膜材料改性方法。PVDF膜表面改性主要通过膜表面的物理改性、磺化改性、表面接枝改性、光化学改性、低温等离子体改性等方法来实现;而PVDF膜材料的改性主要是通过PVDF与亲水性高分子材料或小分子无机粒子的共混以及膜材料本体的化学改性来实现。改性PVDF膜的亲水性增强,使水通量增加,提高了机械性能,改善了抗污染性,增加了膜的使用寿命。     

渗透汽化分离苯—乙醇混合物

以甲基硅橡胶及甲基丙烯酸十二酯－甲基丙烯酸异丁酯的共聚物共为膜材料，以聚丙烯睛多孔膜为底膜制成复合膜，对苯－乙醇混合物进行渗透汽化分离。考察了膜材料的组成、分离温度、原料液组分等因素对膜性能的影响。     

Effect of surface morphology on membrane fouling by humic acid with the use of cellulose acetate butyrate hollow fiber membranes

A serious problem faced during the application of membrane filtration in water treatment is membrane fouling by natural organic matter (NOM). The hydrophilicity, zeta potential and morphology of membrane surface mainly influence membrane fouling. The aim of the present study is to reveal the correlation between membrane surface morphology and membrane fouling by use of humic acid solution and to investigate the efficiency of backwashing by water, which is applied to restore membrane flux. Cellulose acetate butyrate (CAB) hollow fiber membranes were used in the present study. To obtain the membranes with various surface structures, membranes were prepared via both thermally induced phase separation (TIPS) and nonsolvent-induced phase separation (NIPS) by changing the preparation conditions such as polymer concentration, air gap distance and coagulation bath composition. Since the membrane material is the same, the effects of hydrophilicity and zeta potential on membrane fouling can be ignored. More significant flux decline was observed in the membrane with lower humic acid rejection. For the membranes with similar water permeability, the lower the porosity at the outer surface, the more serious the membrane fouling. Furthermore, the effect of the membrane morphology on backwashing performance was discussed.     

壳聚糖交联膜结构及性能的研究

壳聚糖是一种天然生物高分子聚合物，是甲壳素脱乙酰化产物，具有很好的成膜特性．用一种金属离子把壳聚糖分子中的螫合基团络合保护后，用戊二醛交联，并在酸性条件下将该金属离子洗脱，得到了螯合基团依然保留的壳聚糖交联膜．对壳聚糖交联膜的结构及性能进行了研究．结果表明：金属离子有效地保护了壳聚糖分子上的络合基因，该膜的性能较好，对阴离子的选择透过性比较好，并将其应用于元素的分离．     

Effect of membrane parameters on the size and uniformity in preparing agarose beads by premix membrane emulsification

Agarose microbeads were prepared by premix membrane emulsification with Shirasu-Porous Glass (SPG) membrane and Polyethylene (PE) membrane. The effects of membrane parameters, including pore size, pore size distribution, contact angle between membrane surface and the water phase, shape of pore opening and membrane thickness on size and uniformity of agarose beads were investigated in this study. The results showed that pore size distribution and shape of pore opening did not affect the emulsification results apparently within a wide range in premix membrane emulsification, not as the result in general emulsification. The contact angle between the water phase and the membrane surface must be large enough to obtain uniform-sized agarose beads in both direct membrane emulsification and premix membrane emulsification. The results also showed that the membrane pore size and thickness affected the size distribution of emulsion. Thicker membrane resulted in more uniform and smaller emulsion when the number of pass through membrane is controlled. There was a linear relationship between the number average diameter of agarose beads and membranes pores size in premix membrane emulsification. Agarose beads with diameters from 3.06 to 9.02 μm were prepared by controlling membranes pore size. The ratio of the number average diameter of agarose beads to membrane pore diameters was found to be 0.486.     

Preparation and characterization of polyaniline/polysulfone nanocomposite ultrafiltration membrane

Novel nanocomposite membrane was prepared through the filtration of polyaniline (PANI) nanofiber aqueous dispersion with polysulfone (PS) ultrafiltration (UF) membrane. Scanning electron microscope (SEM) images showed that PANI nanofiber layer was formed on the PS membrane surface. Atomic force microscopy (AFM) analysis indicated that the nanocomposite membrane had rougher surface than the PS substrate membrane. Compared with the PS substrate membrane, the nanocomposite membrane had much better permeability for the good hydrophilicity of PANI nanofiber layer, and had almost the same rejection performance. In addition, the nanocomposite membrane had positive surface potential under acidic condition because PANI could be protonated easily by acid. During the filtration of BSA solution, the nanocomposite membrane showed much better antifouling performance than the substrate membrane for the hydrophilicity and steric hindrance effect of its nanofiber layer. Moreover, under acidic solution condition, strong electrostatic repulsion between PANI nanofibers and BSA existed and improved membrane antifouling performance further.     

壳聚糖膜结构与乙醇／水混合液的渗透汽化性能

用渗透汽化膜分离混合液体,纤维素、赛璐玢等作醇/水分离膜有较高的渗透通量,但分离系数低.甲壳素是广泛存在于自然界的一类天然高分子.前文报道了用甲壳素脱乙酰基的产物壳聚糖(CS)作醇/水渗透汽化(PV)分离膜,在一定的原料液浓度下具有较好的选择渗透性.本文讨论CS膜结构对乙醇/水混合液PV性能的影响,并探讨了提高选择性的途径.     

聚偏氟乙烯膜蒸馏技术在水处理中的应用研究进展

膜蒸馏是一种以膜为介质,利用传统蒸发工艺开发的新型膜分离技术。随着高分子材料行业的进步和制膜工艺的成熟,膜蒸馏技术取得了巨大的进展,在水处理领域拥有十分广阔的市场前景。膜蒸馏技术的核心是膜的通量和使用寿命,而性能优良的膜材料是膜蒸馏技术发展的关键。聚偏氟乙烯(PVDF)因具有成膜性能好、表面张力大、化学稳定性强等优点,在膜蒸馏技术应用研究中备受青睐。同时PVDF与其他聚合物具有良好的相容性,为膜的改性研究奠定了基础,极大地扩展了应用范围。本文介绍了膜蒸馏技术的工作原理及工艺特点以及PVDF膜材料的特点及改性方法,重点对PVDF膜蒸馏技术在水处理领域的应用进行了梳理和总结,讨论了该技术亟待研究和解决的问题,以期为该工艺技术的进一步发展提供科学支撑和理论依据。     

Preparation and characterization of Nafion/SPEEK layered composite membrane and its application in vanadium redox flow battery

In order to reduce the cost of membrane used in vanadium redox flow battery (VRB) system while keeping its chemical stability, Nafion/sulfonated poly(ether ether ketone) (SPEEK) layered composite membrane (N/S membrane) consisting of a thin layer of recast Nafion membrane and a layer of SPEEK membrane were prepared by chemical crosslink the sulfonic acid groups of different ionomer membranes. Scanning electron microscopy (SEM) and IR spectra analysis of the membrane showed that Nafion layer was successfully deposited on the SPEEK membrane surface and an integral layered membrane structure was formed. The area resistance and permeability of vanadium ions of membrane were also measured. It was found that N/S membrane have a very low permeability of vanadium ions accompanied by a little higher area resistance compared with Nafion membrane. As a result, the VRB single cell with N/S membrane exhibited higher coulombic efficiency and lower voltage efficiency compared with VRB single cell with Nafion membrane. Although N/S membrane delivered relatively lower energy efficiency compared with Nafion membrane, its good chemical stability and low cost make it a suitable substitute for Nafion membrane used in VRB system.     

全氟磺酸质子交换膜的溶解及再铸膜性能分析

全氟磺酸树脂溶液在质子交换膜燃料电池和电化学中很有用途 .利用二甲基亚砜 ,在 170～ 180℃和氮气保护的条件下对Nafion 115进行了溶解实验 ,获得了两种膜溶液 .利用膜溶液制得了再铸膜 ,并测定了再铸膜的交换容量、含水率和电导率等 .结果表明 :再铸膜的交换容量、含水率和电导均低于其母膜Nafion 115 ,说明在溶解过程中有部分磺酸集团被破坏     

Dielectric analysis of nanofiltration membrane in electrolyte solutions: influences of electrolyte concentration and species on membrane permeation

Dielectric properties of a nanofiltration membrane immersed in dilute aqueous electrolyte solutions were measured, and frequency dependence of capacitance and conductance of the systems was analyzed, based on the interfacial polarization theory, giving values of permittivity and conductivity of the membrane and the solutions. Permittivity, epsilon m, of the membrane slightly decreased whereas conductivity, km, of the membrane increased with increasing electrolyte concentration, as a result of entrance of ions into the membrane. The ratio of membrane/solution conductivity, km/kw, also depended on the electrolyte concentration, showing that distribution of ions in the membrane and in solutions follow Donnan equilibrium, due to the presence of negative fixed charges in the membrane. New expressions were derived from Donnan equilibrium principle to explain this phenomenon, and negative fixed charge concentration ce of the membrane was obtained; thus the Donnan potential, DeltaPhi Don, of the membrane in solutions at various concentrations could be calculated. The new expressions could be expected to be usable to analyze ion permeation property through membrane.     

Experimental evidence to support a theory of lipid membrane fusion

Membrane fusion between two lipid membranes with different curvatures was measured by using a fluorescence fusion assay for lipid vesicle systems and was also obtained by measuring lipid monolayer surface tension upon the fusion of vesicles to monolayer membranes. For such membrane systems, it was found that when lysolipid was incorporated only in the membrane with a greater curvature, membrane fusion was more suppressed than those for the case where the same amount (molar ratio of lysolipid to non-lysolipids) of lysolipid was incorporated only in the membrane with a lower curvature. When lysolipid was incorporated only in a flat membrane (e.g., monolayer) and the fusion of small vesicles (SUV) to the monolayer was measured, suppression of membrane fusion by lysolipid was minimal. It is known that lysolipid lowers the surface energy of curved membranes, which stabilizes energetically such membrane surfaces, and thus suppresses membrane fusion. Our results support our theory of lipid membrane fusion where the membrane fusion occurs through the most curved membrane region at the contact area of two interacting membranes.     

介质极性敏感膜的制备和性能研究

以交联壳聚糖膜为载体,芘为介质极性探针,制备并表征了一种介质极性敏感膜,研究了该膜对醇-水混合溶剂极性的响应行为.基于极性测定,对十二烷基硫酸钠(SDS)和十二烷基磺酸钠(SLS)水溶液中胶束的形成进行了检测.结果表明,该膜具有较好的可逆性和重现性,且制膜方法简单、快速.     

对映体选择性配体交换膜的制备和DL-氨基酸的拆分

制备了一种新型光学分离膜,即带有Ｌ－脯氨酸手性选择子的交联聚乙烯醇膜,考察了ＤＬ－酪氨酸,ＤＬ－苯丙氨酸和ＤＬ－色氨酸通过膜的对映体选择性渗透性能。发现Ｌ－氨基酸优先透过膜,消旋氨基酸透过膜的对映体拆分机理类似于手性配体交换色谱方法拆分消旋氨基酸的机理,在ＤＬ－氨基酸的对映体选择性膜透过中,对映体选择性吸附着重要的作用。     

镧在细胞膜上键合形态研究

研究了一种简单快速的富膜细胞组分的提取和分离方法，并运用这种方法研究了大豆幼苗根细胞膜上La结合形态，La末与膜蛋白结合，而是与一非膜蛋白组分呈优势结合。     

Effects of Irradiation on the Structure-activity Relationship of Konjac Glucomannan Molecular Chain Membrane

To know the effects of irradiation on the konjac glucomannan (KGM) molecular chain membrane, KGM membrane solution was treated with the irradiation dose of 0-20 kGy in this study, and the structure and properties of KGM membrane were analyzed with Infrared spectrum, Raman spectrum, X-ray, SEM scanning and so on. The results revealed that the effects of different irradiation doses on the KGM molecular chain structure were different. Higher irradiation dose (20 kGy) resulted in partial damage against KGM membrane crystal structure, and there was no obvious change for the amorphous structure; with membrane property test, the tensile strength of KGM membrane gradually increased with the increase of irradiation dose and its elongation at break reduced, but these changes were not significant, WVP value reduced; with SEM, the membrane surface treated with irradiation was smoother even than the membrane without treatment. In addition, when increasing the irradiation dose, membrane surface became more even, and arrangement was more orderly and compact. Irradiation modification could effectively improve the KGM membrane properties, and it is an ideal modification method.     

氟涂层对聚合物-钴卟啉膜氧气输送性能及其寿命的影响

采用在聚合物-钴卟啉(CoP)膜表面旋转涂覆氟涂料法,制备了氧/氮分离膜.研究表明,与未涂层膜相比,氟涂层膜中的CoP与氧表观结合平衡常数、膜的氧渗透系数和氧/氮选择性没有发生明显变化.随氟涂层厚度增加,氧渗透系数稍有降低,但水蒸汽渗透系数显著降低.由于氟涂层的憎水性,使涂层膜的水蒸汽渗透系数显著降低,氧载体CoP与氧结合寿命延长了4倍.