Alternate assemblies of platinum nanoparticles and metalloporphyrins as tunable electrocatalysts for dioxygen reduction

Through electrostatic layer-by-layer (LBL) assembly, negatively charged citrate-stabilized platinum nanoparticles (PtNPs) and positively charged [tetrakis(N-methylpyridyl)porphyrinato] cobalt were alternately deposited on a 4-aminobenzoic acid-modified glassy carbon electrode and also on indium tin oxide substrates, directly forming the three-dimensional nanostructured materials. Thus-prepared multilayer films were characterized by UV--visible spectroscopy, surface plasmon resonance (SPR) spectroscopy, atomic force microscopy (AFM), and cyclic voltammetry. Regular growth of the multilayer films is monitored by UV--visible spectroscopy and SPR spectroscopy. AFM provides the morphology of the multilayer films. The PtNPs containing multilayer films exhibit high electrocatalytic activity for the reduction of dioxygen with high stability. Rotating disk electrode voltammetry and rotating ring-disk electrode voltammetry demonstrate that the PtNP-containing multilayer films can catalyze an almost four-electron reduction of O(2) to H(2)O in an air-saturated 0.5 M H(2)SO(4) solution. Furthermore, the electrocatalytic activity of the films could be further tailored by simply choosing different cycles in the LBL process or more specifically the amount of the assembly components in the films. The high electrocatalytic activity and good stability for dioxygen reduction make the PtNP-containing multilayer films potential candidates for the efficient cathode material in fuel cells.     

Electrochemical Designing of Au/Pt Core Shell Nanoparticles as Nanostructured Catalyst with Tunable Activity for Oxygen Reduction

Au/Pt core shell nanoparticles (NPs) have been prepared via a layer‐by‐layer growth of Pt layers on Au NPs using underpotential deposition (UPD) redox replacement technique. A single UPD Cu monolayer replacement with Pt(II) yielded a uniform Pt film on Au NPs, and the shell thickness can be tuned by controlling the number of UPD redox replacement cycles. Oxygen reduction reaction (ORR) in air‐saturated 0.1 M H₂SO₄ was used to investigate the electrocatalytic behavior of the as‐prepared core shell NPs. Cyclic voltammograms of ORR show that the peak potentials shift positively from 0.32 V to 0.48 V with the number of Pt layers increasing from one to five, suggesting the electrocatalytic activity increases with increasing the thickness of Pt shell. The increase in electrocatalytic activity may originate mostly from the large decrease of electronic influence of Au cores on surface Pt atoms. Rotating ring‐disk electrode voltammetry and rotating disk electrode voltammetry demonstrate that ORR is mainly a four‐electron reduction on the as‐prepared modified electrode with 5 Pt layers and first charge transfer is the rate‐determining step.     

多孔纳米结构Fe/Pt-Fe电极对碱性介质中甲醇电氧化的催化活性（英文）

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodeposition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodepo-sition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

纳米铂电极的制备及其电化学行为

以镍铬合金为基体,采用电化学方法在其表面沉积制备了纳米Pt电极,用SEM对电极的形貌进行了表征,以亚铁氰化钾为分子探针考察了Pt电极的电化学性能。结果表明该电极对亚铁氰化钾具有稳定、灵敏的电化学响应,并对H2O2的电化学还原具有良好的催化活性。H2O2峰电流与其浓度在0.03-1.0 mmol/L范围内呈良好的线性关系,检出限（S/N=3）为7×10^-6mol/L。相同实验条件下,该纳米Pt电极的催化活性远高于纯Pt电极。     

Alternate assemblies of polyelectrolyte functionalized carbon nanotubes and platinum nanoparticles as tunable electrocatalysts for dioxygen reduction

A novel method based on electrostatic layer-by-layer self-assembly (LBL) technique for alternate assemblies of polyelectrolyte functionalized multi-walled carbon nanotubes (MWNTs) and platinum nanoparticles (PtNPs) is proposed. The shortened MWNTs can be functionalized with positively charged poly(diallyldimethylammonium chloride) (PDDA) based on electrostatic interaction. Through electrostatic layer-by-layer assembly, the positively charged PDDA functionalized MWNTs (PDWNTs) and negatively charged citrate-stabilized PtNPs were alternately assembled on a 3-mercaptopropanesulfonic sodium (MPS) modified gold electrode and also on other negatively charged surface, e.g. quartz slide and indium–tin-oxide (ITO) plate, directly forming the three-dimensional (3D) nanostructured materials. This is a very general and powerful technique for the assembling three-dimensional nanostructured materials containing carbon nanotubes (CNTs) and nanoparticles. Thus prepared multilayer films were characterized by ultraviolet–visible–near-infrared spectroscopy (UV–vis–NIR), scanning electron microscopy (SEM) and cyclic voltammetry (CV). Regular growth of the mutilayer films is monitored by UV–vis–NIR. SEM provides the morphology of the multilayer films. The PtNPs containing multilayer films exhibit high electrocatalytic activity for the reduction of dioxygen. Furthermore, the electrocatalytic activity of the films could be further tailored by simply choosing different cycles in the LBL process. This assembling method for polyelectrolyte functionalized carbon nanotubes and nanoparticles introduces new opportunities for the incorporation of various functionalities into nanotube devices, which, in turn, opens up the possibility of building more complex multicomponent nanostructures.     

Oxygen reduction at platinum monolayer islands deposited on Au(111)

Atomic monolayer islands of Pt, namely, two-dimensional Pt nanoparticles, on a Au(111) electrode have been studied for the first time, focusing on their electrocatalytic activities for oxygen reduction in acid solutions. The Pt islands' electrodes were prepared using the self-assembled technique of thiols together with the replacement of Pt with a Cu monolayer. The states of adsorbed OH and the catalytic activities of oxygen reduction were sensitive to the Pt island size. As island size decreased, a delay in the reduction of surface oxide was observed. However, negligible influence of adsorbed OH on activity for oxygen reduction was observed. Pt islands of sizes ranging from 5 to 10 nm showed higher specific catalytic activities for oxygen reduction. Specific catalytic activities decreased by a factor of 10 with a decrease in island sizes from 5.5 to 3.1 nm. Size effects observed in Pt monolayer islands were discussed in comparison with three-dimensional nanoparticles, to obtain information concerning the size effects of metal nanoparticles.     

蒽醌/聚吡咯复合膜修饰电极的电化学行为和电催化活性

在水溶液中制备了掺杂蒽醌磺酸盐(AQS)的聚吡咯(PPy)/玻碳复合膜修饰电极,采用循环伏安法和旋转圆盘电极技术研究了该修饰电极在不同pH值溶液中的电化学行为以及在pH=5.5的磷酸盐缓冲溶液中对氧还原反应的电催化性能和动力学.结果表明,与裸玻碳电极相比,PPy膜的存在不仅降低了AQS的反应电位和峰电位差,而且增大了其氧化还原反应的峰电流,H2AQ/HAQ-氧化还原对的电离常数为9.5.AQS/PPy膜修饰电极上氧的还原主要是两电子还原为H2O2的不可逆过程,H2AQ对氧还原反应起主要催化作用,还原过程符合异相氧化还原催化机理.该修饰电极具有良好的电化学重现性.     

Keggin型缺位硅钨杂多阴离子的电化学性质及电催化还原H2O2

应用循环伏安、方波伏安和交流阻抗法研究了Keggin型缺位硅钨杂多阴离子SiW11O398-(SiW11)在0.1mol.L-1NaHSO4+Na2SO4溶液中的电化学性质及其对H2O2还原的间接电催化作用.结果表明,SiW11的酸性水溶液在玻碳(GC)电极上显示两对可逆的还原-氧化波,对应的电荷迁移数均为1,且有2个质子参与反应.根据第1对波的还原峰电流与扫描速率平方根关系得到SiW11在溶液中的扩散系数DO为8.92×10-6cm2.s-1.SiW11对H2O2的还原具有明显的电催化活性,催化峰电位随溶液pH的降低而正移,峰电流增大.质子H+在催化反应中起协同促进作用.实验测定该电催化过程的均相准一级反应速率常数为0.30 s-1.SiW11电催化还原H2O2的机理被认为是经过形成所谓"七配位过氧化物"而发生的.     

Transport effects in the oxygen reduction reaction on nanostructured, planar glassy carbon supported Pt/GC model electrodes

The role of transport and re-adsorption processes on the oxygen reduction reaction (ORR), and in particular on its selectivity was studied using nanostructured model electrodes consisting of arrays of Pt nanostructures of well-defined size and separation on a planar glassy carbon (GC) substrate. The electrochemical measurements were performed under controlled transport conditions in a double-disk electrode thin-layer flow-cell configuration; the model electrodes were fabricated by colloidal lithography techniques, yielding Pt nanostructures of well defined and controlled size and density (diameter: 140 or 85 nm, height: 20 or 10 nm, separation: from 1-2 to more than 10 diameters). The nanostructured model electrodes were characterized by scanning electron microscopy and electrochemical probing of the active surface area (via the hydrogen adsorption charge). The electrocatalytic measurements revealed a pronounced variation of the hydrogen peroxide yield, which increases by up to two orders of magnitude with increasing separation and decreasing size of the Pt nanostructures. Similar, though less pronounced effects were observed upon varying the electrolyte flow and thus the mass transport characteristics. These effects are discussed in a reaction model which includes (i) direct reduction to H(2)O on the Pt surface and (ii) additional H(2)O(2) formation and desorption on both Pt and carbon surfaces and subsequent partial re-adsorption and further reduction of the H(2)O(2) molecules on the Pt surface.     

化学修饰电极的研究XVIII,四苯基钴卟啉化学修饰玻碳电极的热处理及其对氧的催化还原

本文研究四苯基钴卟啉化学修饰玻碳电极的热处理,经热处理的这种电极[(PCo/GC)h]具有对氧催化还原的异常高的稳定性和活性.在纯O2饱和的0.05mol.L^-^1H2SO4溶液中经循环伏安(CV)扫描3000次(100mV/s),其催化活性未见明显降低.研究了热处理温度(500-1000℃)对(PCo/GC)h电极电催化性能的影响.用紫外可见光谱对热处理产物的结构进行了分析.用CV法及旋转圆盘电极研究了O2在(PCo/GC)h电极上电催化反应动力学,测定了速率常数.在该电极上O2的还原反应为二电子还原成H2O2的不可逆过程.     

The application of novel spindle-like polypyrrole hollow nanocapsules containing Pt nanoparticles in electrocatalysis oxidation of nicotinamide adenine dinucleotide (NADH)

Novel spindle-like polypyrrole hollow nanocapsules containing Pt nanoparticles (Pt NPs/PPy composite hollow nanospindles) were successfully prepared by using beta-akaganeite (β-Fe(3+)O(OH,Cl)) nanospindles as templates and methanoic acid as a reducing agent. The β-Fe(3+)O(OH,Cl) templates can be easily obtained in ethanol/water mixing solution in the presence of thiophene and FeCl(3)·6H(2)O, and after coating by PPy shell, they can be gradually and completely etched during the reduction of H(2)PtCl(6) into Pt nanoparticles (Pt NPs) with the average size of 3.6 nm on spindle-like polypyrrole hollow nanocapsules, which could still keep their integrality of morphologies with the thickness of PPy shell of 18-20 nm. The investigation of Pt NPs/PPy composite hollow nanospindles modified glassy carbon electrode (GCE) for the application to detect nicotinamide adenine dinucleotide (NADH) with cyclic voltammetry (CV) and amperometry indicated good linearity and sensitivity of responses in the certain range of NADH concentration. The influence of Pt NPs content to the NADH oxidation current was also studied. This new kind of unique spindle-like noble metal/conducting polymer hollow nanostructured complex can be acted as a good steady electrode material for electrocatalytic oxidation of NADH.     

Immobilization of CoII-(N,N′-bis(salicylidene)-2-aminobenzylamine) on Poly(pyrrole-co-o-anisidine)/Chitosan Composite Films: Application to Electrocatalytic Oxidation of Catechol

In this study, poly (pyrrole-co-o-anisidine)/chitosan composite (Cs) films were prepared by cyclic voltammetry technique on platinum electrode using different pyrrole and o-anisidine mole ratios. Immobilization process was accomplished in Co^II-(N,N′-bis(salicylidene)-2-aminobenzylamine)(CoL) dissolved 0.15 M acetonitrile-LiClO₄ solution by cyclic voltammetry technique at 0.2–2.0 V potential range. Three electrode methods were applied in all electrochemical studies. After immobilization process, the characterizations of the electro catalytic surfaces (Cs−CoL−Pt) were carried out by cyclic voltammetry and SEM images. The SEM images clearly indicated that the [CoL] complex is immobilized onto composite films. The electrocatalytic activity of the modified electrodes on the catechol was investigated using buffer solutions of different pH values. The results of catalytic studies revealed that, pH=10 buffer solution was the optimal solution and 1 : 1 Cs−CoL−Pt electrode was the best electrode for catechol oxidation. In square wave voltammetry measurements using this electrode, two linear working ranges were determined. The linear response ranges for catechol determination were found as 3.0 μM–6.0 μM and 16 μM–80 μM for the first and the second linear working ranges, respectively, with 1.1 μM detection limit.     

A general method for the rapid synthesis of hollow metallic or bimetallic nanoelectrocatalysts with urchinlike morphology

We have reported a facile and general method for the rapid synthesis of hollow nanostructures with urchinlike morphology. In-situ produced Ag nanoparticles can be used as sacrificial templates to rapidly synthesize diverse hollow urchinlike metallic or bimetallic (such as Au/Pt) nanostructures. It has been found that heating the solution at 100 degrees C during the galvanic replacement is very necessary for obtaining urchinlike nanostructures. Through changing the molar ratios of Ag to Pt, the wall thickness of hollow nanospheres can be easily controlled; through changing the diameter of Ag nanoparticles, the size of cavity of hollow nanospheres can be facilely controlled; through changing the morphologies of Ag nanostructures from nanoparticle to nanowire, hollow Pt nanotubes can be easily designed. This one-pot approach can be extended to synthesize other hollow nanospheres such as Pd, Pd/Pt, Au/Pd, and Au/Pt. The features of this technique are that it is facile, quick, economical, and versatile. Most importantly, the hollow bimetallic nanospheres (Au/Pt and Pd/Pt) obtained here exhibit an area of greater electrochemical activity than other Pt hollow or solid nanospheres. In addition, the approximately 6 nm hollow urchinlike Pt nanospheres can achieve a potential of up to 0.57 V for oxygen reduction, which is about 200 mV more positive than that obtained by using a approximately 6 nm Pt nanoparticle modified glassy carbon (GC) electrode. Rotating ring-disk electrode (RRDE) voltammetry demonstrates that approximately 6 nm hollow Pt nanospheres can catalyze an almost four-electron reduction of O(2) to H(2)O in air-saturated H(2)SO(4) (0.5 M). Finally, compared to the approximately 6 nm Pt nanoparticle catalyst, the approximately 6 nm hollow urchinlike Pt nanosphere catalyst exhibits a superior electrocatalytic activity toward the methanol oxidation reaction at the same Pt loadings.     

纳米TiO2膜修饰电极上对硝基苯甲酸异相电催化还原

有机电合成具有对环境友好、反应条件温和副产物少等优点并符合“原子经济性”要求，是一种可持续发展的绿色化学方法，已成为化学研究的重要前沿之一．使用媒质作为氧化剂和还原剂的间接电合成，大多为均相氧化还原电催化过程，把氧化还原催化剂固定在电极表面的异相电催化与均相催化相比具有更为显著的优点．本文采用循环伏安和电解合成法研究了纳米TiO2膜电极在硫酸介质和氢氧化钠介质中的氧化还原行为以及异相电催化还原对硝基苯甲酸的活性，探讨了纳米TiO2膜异相电催化的本质．     

水热氧化法制备γ-Mn2O3

研究了用电化学方法制备的铂微粒修饰的聚２,５二甲氧基苯胺电极对甲酸的电催化氧化,用ＳＥＭ、ＸＰＳ表征了这种电极材料的表面结构,结果表明,这种复合电极对甲酸在酸性介质中电化学氧化具有很高的催化活性,较之裸铂电极其催化电流提高１００多倍．循环伏安法制备的铂微粒较均匀地分布在聚合物上,其粒径大约为３００ｎｍ．研究了铂微粒载量、阴离子种类、反应温度和浓度等因素对电极催化活性的影响．     

Biopolymer and carbon nanotubes interface prepared by self-assembly for studying the electrochemistry of microperoxidase-11

Stable films of biopolymer chitosan and carbon nanotubes were prepared by a layer-by-layer self-assembly technique. Atomic force microscopy, scanning electron microscopy, cyclic voltammetry, and UV-vis spectroscopy were used to characterize the film assembly. Atomic force microscopy and scanning electron microscopy showed that an even, stable film was formed. The UV-vis spectroscopy and cyclic voltammetry study indicated the uniform growth of the film. The property of the self-assembled multilayer film in promoting protein electron transfer was demonstrated by incorporating microperoxidase-11 in the film. Microperoxidase-11 in the multilayer film could transfer electrons with the electrode indicating that carbon nanotubes could wire the protein to the electrode. The electrocatalytic activity of the microperoxidase-11 containing multilayer film-modified electrode toward H(2)O(2) and O(2) was investigated. The results showed that along with the increase in the assembled layers the electrocatalytic reduction potentials of H(2)O(2) and O(2) shifted positively. The prepared multilayer film of chitosan and carbon nanotubes containing protein was a sensitive interface for electrocatalytic study.     

壳聚糖-铜复合物修饰电极对过氧化氢电催化性能的研究

将壳聚糖与铜盐通过配位结合制得壳聚糖-铜复合物(CTS-Cu),并用其修饰玻碳电极,使用循环伏安法和计时安培法研究了该修饰电极对H2O2的电催化性能,对其催化机理进行了探讨.优化的实验条件为:以0.1 mol/L.磷酸缓冲溶液(PBS,pH 7.0)为反应介质,CTS-Cu修饰液中的铜离子浓度为6 mmol/L,工作电...     

Influence of the nickel content on the electrocatalytic activity of thin nanostructured Co–Te–Ni–O films

The influence of nickel addition in Co–Te–O catalytic films, obtained by vacuum co-evaporation of Co, Ni, and TeO₂ on electrocatalytic activity toward oxygen reactions in alkaline media has been investigated. Bifunctional gas-diffusion oxygen electrodes were prepared by direct deposition of catalyst films on gas-diffusion membranes consisting of hydrophobized carbon blacks. The method used allows the deposition of nanostructured films consisting of intertwined nanowires with high surface area. Thus, obtained electrodes with different atomic ratio R _(Co+Ni)/Te of the catalyst, fresh and thermally treated at 100 °C temperatures were electrochemically tested by means of cyclic voltammetry and steady-state voltammetry. It has been shown that the partial replacement of Co with about 30 at.% Ni leads to the increase in the film catalytic activity toward oxygen evolution reaction.     

电化学去合金化Pt(Pd)-Cu对氧的电催化还原活性的研究

应用电化学去合金法制备了表面覆盖有Pt(Pd)原子层的Pt(Pd)-Cu合金催化剂.研究该催化剂在0.1mol.L-1HClO4酸性溶液中对氧气电化学还原的催化活性,并采用同步辐射反常X-射线衍射法(Anomalous X-ray Diffraction,AXRD)和表面X-射线散射法(Surface X-ray Scattering,SXS)从原子尺度研究了去合金化后催化剂的结构.分析对比纳米颗粒、薄膜和单晶3种不同形式的去合金化Pt-Cu的结构和催化活性以及Pt-Cu和Pd-Cu两种不同合金薄膜的结构和催化活性.结果表明,表面应力是影响催化剂催化活性的关键因素,而应力大小则与去合金化后所形成的表面Pt(Pd)层的厚度相关,材料尺寸和组成元素等都影响表面Pt(Pd)层的厚度.提出可利用调控材料表面的应力来设计高催化活性的催化剂.