Synthesis of porous hematite nanorods loaded with CuO nanocrystals as catalysts for CO oxidation

Porous hematite (α-Fe2O3) nanorods with the diameter of 20-40 nm and the length of 80-300 nm were synthesized by a simple surfactant-assisted method in the presence of cetyltrimethylammonium bromide (CTAB).The α-Fe2O3 nanorods possess a mesostructure with a pore size distribution in the range of 5-12 nm and high surface area,exhibiting high catalytic activity for CO oxidation.CuO nanocrystals were loaded on the surface of porous α-Fe2O3 nanorods by a deposition-precipitation method,and the catalysts exhibited superior activity for catalytic oxidation of CO,as compared with commercial α-Fe2O3 powders supported CuO catalyst.The enhanced catalytic activity was attributed to the strong interaction between the CuO nanocrystals and the support of porous α-Fe2O3 nanorods.     

微乳液合成胶体CuO/γ-Al2O3及其催化芳香硝基化合物还原（英文）

Monodispersed colloidal copper oxide nanoparticles were synthesized by water-in-oil microemulsion using CuCl 2·H2O and NaOH.The effect on CuO particle size was studied by varying the water-to-surfactant molar ratio,precursor concentration and molar ratio of NaOH to CuCl2.The morphology,size and size distribution of the particles were studied by transmission electron microscopy and dynamic light scattering.Dispersion destabilization of the colloidal copper oxide nanoparticles was detected by a Turbiscan apparatus.CuO/γ-Al2O3 catalysts were prepared by dispersing highly stable CuO nanoparticles on γ-alumina by mechanical stirring.The catalysts were analyzed by scanning electron microscopy,transmission electron microscopy,X-ray photoelectron,and X-ray diffraction,which confirmed the uniform dispersion of CuO on the support.The reduction of the nitro aromatic compounds,4-nitrophenol,3-nitrophenol,and 2-nitrophenol,were studied.The CuO/γ-Al2O3 catalysts were active for the reduction of these nitro aromatic compounds.     

TiO2/SiO2/γ-Fe2O3-SiO2磁性光催化剂的制备与表征

 A γ-Fe2O3-SiO2 composite was prepared by sol-gel method followed by calcination at 700 ℃ for 30 min starting from tetraethoxysilane and iron nitrate. Upon further coating with SiO2 and TiO2, a TiO2/SiO2/γ-Fe2O3-SiO2 magnetic photocatalyst was obtained. XRD results show that Fe in the composite converts to the γ-Fe2O3 phase up to a processing temperature of 700 ℃, and further increase in temperature results in the formation of the α-Fe2O3 phase. The TiO2/SiO2/γ-Fe2O3-SiO2 samples obtained are monodisperse spherical particles with 200～250 nm diameter, well coated firstly by an amorphous SiO2 layer and then by an anatase TiO2 layer. The TiO2/SiO2/γ-Fe2O3-SiO2 particles retain their magnetic property well and show high activity for the photocatalytic degradation of salicylhydroxamic acid.     

Preparation,characterization and catalytic behavior of hierachically porous CuO/α-Fe_2O_3/SiO_2 composite material for CO and o-DCB oxidation

Hierachically porous (HP) CuO/α-Fe2O3/SiO2 composite material was fabricated by sol-gel method and multi-hydrothermal processes using HP-SiO2 as support.The resulting material was characterized by N2 adsorption-desorption,X-ray diffraction and scanning electron microscopy.The as-prepared CuO/Fe2O3/HP-SiO2 sample,with α-Fe2O3 and CuO nanocrystals,possessed a co-continuous skeleton,through-macroporous and mesoporous structure.Its catalytic behavior for CO and o-DCB oxidation was investigated.The result showed that CuO/Fe2O3/HP-SiO2 catalyst exhibited high catalytic activity for both CO and o-DCB oxidation,indicating its potential application in combined abatement of CO and chlorinated volatile organic compounds.     

铂沉积对Ga2O3-SiO2纳米粒子光催化性能的提高（英文）

Ga2O3‐SiO2 nanoparticles were prepared by a sol‐gel method and Pt was then immobilized on their surface via photo‐assisted deposition (PAD). The produced samples were characterized using X‐ray diffraction (XRD), ultraviolet and visible spectroscopy, photoluminescence emission spectroscopy, and surface area measurements. The catalytic performances of the Ga2O3‐SiO2 and Pt/ Ga2O3‐SiO2 samples were evaluated for the degradation of cyanide using visible light. XRD and EDX results showed that the Pt was well dispersed within the Ga2O3‐SiO2 phase and was detected on the surface of the catalyst, which confirmed the successful loading of Pt ions by the PAD method. BET results revealed that the surface area of Ga2O3‐SiO2 was higher than that of Pt/Ga2O3‐SiO2 . 0.3 wt% Pt/Ga2O3‐SiO2 exhibited the highest photocatalytic activity for degradation of cyanide under visible light. The catalyst could be reused with no loss in activity for the first 10 cycles.     

Carbon nanotubes decorated α-Al2O3 containing cobalt nanoparticles for Fischer-Tropsch reaction

A new hierarchical composite consisted of multi-walled carbon nanotubes (CNTs) layer anchored on macroscopic α-Al2O3 host matrix was synthesized and used as support for Fischer-Tropsch synthesis (FTS). The composite constituted by a thin shell of a homogeneous, highly entangled and structure-opened carbon nanotubes network and it exhibited a relatively high and fully accessible specific surface area of 76 m 2 g-1 , compared with that of 5 m 2 g-1 of the original α-Al2O3 support. The metal-support interaction between carbon nanotubes surface and cobalt precursor and high effective surface area led to a relatively high dispersion of cobalt nanoparticles. This hierarchically supported cobalt catalyst exhibited a high FTS activity along with an extremely high selectivity towards liquid hydrocarbons compared with the cobalt-based catalyst supported on pristine α-Al2O3 or on CNTs carriers. This improvement can attribute to the high accessibility of composite surface area comparing with the macroscopic host structure alone or to the bulk CNTs where the nanoscopic dimension induced a dense packing with low mass transfer which favoured the problem of reactants competitive diffusion towards the cobalt active site. In addition, intrinsic thermal conductivity of decorated CNTs could help the heat dissipating throughout the catalyst body, thus avoiding the formation of local hot spots which appeared in high CO conversion under pure syngas feed in FTS reaction. Cobalt supported on CNTs decorated α-Al2O3 catalyst also exhibited satisfied high stability during more than 200 h on stream under relatively severe conditions compared with other catalysts reported in the literature. Finally, the macroscopic shape of such composite easily rendered its usage as catalyst support in a fixed-bed configuration without facing problems of transport and pressure drop as encountered with the bulk CNTs.     

微乳液合成胶体CuO/γ-Al_2O_3及其催化芳香硝基化合物还原(英文)

Monodispersed colloidal copper oxide nanoparticles were synthesized by water-in-oil microemulsion using CuCl 2·H2O and NaOH.The effect on CuO particle size was studied by varying the water-to-surfactant molar ratio,precursor concentration and molar ratio of NaOH to CuCl2.The morphology,size and size distribution of the particles were studied by transmission electron microscopy and dynamic light scattering.Dispersion destabilization of the colloidal copper oxide nanoparticles was detected by a Turbiscan apparatus.CuO/γ-Al2O3 catalysts were prepared by dispersing highly stable CuO nanoparticles on γ-alumina by mechanical stirring.The catalysts were analyzed by scanning electron microscopy,transmission electron microscopy,X-ray photoelectron,and X-ray diffraction,which confirmed the uniform dispersion of CuO on the support.The reduction of the nitro aromatic compounds,4-nitrophenol,3-nitrophenol,and 2-nitrophenol,were studied.The CuO/γ-Al2O3 catalysts were active for the reduction of these nitro aromatic compounds.     

Gas sensing performance of polyaniline/ZnO organic-inorganic hybrids for detecting VOCs at low temperature

Polyaniline (PANI) was prepared by the chemical oxidative polymerization of aniline, and ZnO, with the mean particle size of 28 nm, was synthesized by a non-aqueous solvent method. The organic-inorganic PANI/ZnO hybrids with different mass fractions of PANI were obtained by mechanically mixing the prepared PANI and ZnO. The gas sensing properties of PANI/ZnO hybrids to different volatile organic compounds (VOCs) including methanol, ethanol and acetone were investigated at a low operating temperature of 90°C. Compared with the pure PANI and ZnO, the PANI/ZnO hybrids presented much higher response to VOCs. Meanwhile, the PANI/ZnO hybrid exhibited a good reversibility and a short response-recovery time, implying its potential application for gas sensors. The sensing mechanism was suggested to be related to the existence of p-n heterojunctions in the PANI/ZnO hybrids.     

Novel Approach for the Decoration of Magnetic Carbon Nanospheres with Platinum Nanoparticles and Their Enhanced Peroxidase Activity for the Colorimetric Detection of H2O2

Pt/Fe3O4-DIB-DETA-CNS(PFDDC)nanocomposite(DIB=2,4-dihydroxybenzaldehyde;DETA=diethylenetfiamine;CNS=carbon nanosphere)was synthesized by dispersing Pt nanoparticles on magnetic carbon nanospheres. The structure,morphology and composition of the nanocomposite were studied by X-ray diffraction(XRD),transmission electron microscopy(TEM),energy-dispersive X-ray spectroscopy(EDX)and X-ray photoelectron spectroscopy(XPS). In addition,the nanocomposite showed superior peroxidase-like activity towards 3,3',5,5'-tetramethylbenzidine(TMB) with a visual color change in the presence of hydrogen peroxide(H2O2).Therefore,the PFDDC nanocomposite provides a sensing platform for the colorimetric detection of H2O2 with high sensitivity and selectivity.Furthermore,the nanocomposite can be conveniently preserved and separated.These features enable the nanocomposite to colorimetrically detect H2O2 for potential pharmaceutical,environmental and industrial applications.     

Preparation of Highly Active Pt-K/γ-Al2O3 Catalyst for o-Phenylphenol Synthesis from o-Cyclohexenyl-cyclohexanone Dehydrogenation

0.5%Pt-K/γ-Al2O3 catalysts for the synthesis of o-phenylphenol（OPP） from o-cyclohexenyl-cyclohexanone （dimer） dehydrogenation were prepared by means of a two subsequent impregnation method. The effects of catalyst preparation parameters, such as K promoters, calcination, and reduction conditions, were investigated. The results showed that the addition of K2SO4 to Pt/γ-Al2O3 catalyst notably promoted the selectivity of OPP, and its optimum content was found to be 6% in mass fraction. The higher activity was obtained when Pt/γ-Al2O3 catalyst was calcined in nitrogen atmosphere at 400--500 ℃ and then reduced at the same temperature for 3 h in hydrogen atmosphere. The conversion of the dimer and the selectivity of OPP were always above 99% and 90%, respectively, over 0.5%Pt-6% K2SO4/γ-Al2O3 catalyst during the pilot scale test of 8000 h.     

A New Amperometric Biosensor Based on HRP/Nano-Au/L-Cysteine/Poly（o-Aminobenzoic acid）-Membrane-Modified Platinum Electrode for the Determination of Hydrogen Peroxide

The third generation amperometric biosensor for the determination of hydrogen peroxide （H2O2） has been described. For the fabrication of biosensor, o-aminobenzoic acid （oABA） was first electropolymerized on the surface of platinum （Pt） electrode as an electrostatic repulsion layer to reject interferences. Horseradish peroxidase （HRP） absorbed by nano-scaled particulate gold （nano-Au） was immobilized on the electrode modified with polymerized o-aminobenzoic acid （poABA） with L-cysteine as a linker to prepare a biosensor for the detection of H2O2. Amperometric detection of H2O2 was realized at a potential of ＋20 mV versus SCE. The resulting biosensor exhibited fast response, excellent reproducibility and sensibility, expanded linear range and low interferences. Temperature and pH dependence and stability of the sensor were investigated. The optimal sensor gave a linear response in the range of 2.99×10^-6 to 3.55×10^-3 mol·L^-1 to H2O2 with a sensibility of 0.0177 A·L^-1·mol^-1 and a detection limit （S/N = 3） of 4.3×10^-7 mol·L^-1. The biosensor demonstrated a 95% response within less than 10 s.     

A quantitative colorimetric assay of H2O2 and glucose using silver nanoparticles induced by H2O2 and UV

A simple spectrophotometric assay of H2O2 and glucose using Ag nanoparticles has been carried out. Relying on the synergistic effect of H2O2 reduction and ultraviolet （UV） irradiation, Ag nanoparticles with enhanced absorption signals were synthesized. H2O2 served as a reducing agent in the Ag nanoparticles formation in which Ag＋ was reduced to Ago by O2- generated via the decomposition of H2O2 in alkaline media. On the other hand, photoreduction of Ag＋ to Ago under UV irradiations also contributed to the nanoparticles formation. The synthesized nanoparticles were characterized by TEM, XPS, and XRD. The proposed method could determine H2O2 with concentrations ranging from 5.0× 10^-7 to 6.0× 10^-5 tool/ L The detection limit was estimated to be 2.0 × 10^-7 mol/L. Since the conversion of glucose to gluconic acid catalyzed by glucose oxidase was companied with the formation of H2O2, the sensing protocol has been successfully utilized for the determination of glucose in human blood samples. The results were in good agreement with those determined by a local hospital. This colorimetric sensor thus holds great promises in clinical applications.     

Comparison of the Sol-gel Method with the Coprecipitation Technique for Preparation of Hexagonal Barium Ferrite

Hexagonal barium ferrite BaFe12O19 particles were prepared by sol-gel and coprecipitation methods, respectively. The composition of the so-obtained materials was investigated by means of XRD. By the sol-gel method, non-anticipated intermediate crystalline phases, such as γ-Fe2O3, α-Fe2O3, BaCO3, and BaFe2O4 etc., were formed with the delay of the formation of BaFe12O19. The formation of single phase BaFe12O19 required calcination at 850 oC for 4 h. On the other hand, using coprecipitation technique, amorphous hydroxide precursor was directly transferred into BaFe12O19 almost without the formation of intermediate crystalline phases. BaFe12O19 was prepared by calcining at 700 oC for 3 h. The results were confirmed by ESEM and VSM analyses. Based on the already reported results and the observed results in this study, it can be concluded that the coprecipitaion technique is easier to control than the sol-gel method for preparation of BaFe12O19 at a low temperature.     

A WO_3-CuWO_4 nanostructured heterojunction for enhanced n-butanol sensing performance

Herein,a WO_3-CuWO_4 nanostructured heteroj unction was prepared by a facile two-step hydrothermal method.It is composed of a WO_3 square microplate and CuWO_4 nanoparticles.Then,the gas sensing properties were investigated under optimal operating temperature(120℃).The WO_3-CuWO_4 heterostructure shows good sensing performance towards n-butanol,with a response value up to 9.4 to towards 30 ppm n-butanol,and the response value is about 3 times higher than that of pristine Wo_3.Its detection limit for n-butanol is 0.1 ppm,which indicates a potential application in lower concentration detection.Moreover,the response time of Wo_3-CuWO_4 nanostructured hete rojunction and the pristine WO_3 are 21 s and 240 s respectively,revealing that there is a faster gas sensing process in the heterostructure.A possible sensing mechanism was then proposed on the basis of experimental data and band structure analysis.The significant enhancement of WO_3-CuWO_4 heterostructure could be attributed to the formation of heterojunction,which brings electronic sensitization and electron transport pathway modulation.The work offered a kind of novel and cost-effective sensing materials,and inspired more novel devices based on nanostructured heterojunction mechanism.     

Electrochemical DNA nano-biosensor for the detection of genotoxins in water samples简

In the present study, a disposable electrochemical DNA nano-biosensor is proposed for the rapid detection of genotoxic compounds and bio-analysis of water pollution. The DNA nano-biosensor is prepared by immobilizing DNA on Au nanoparticles and a self-assembled monolayer of cysteamine modified Au electrode. The assembly processes of cysteamine, Au nanoparticles and DNA were characterized by cyclic voltammetry （CV）. The Au nanoparticles enhanced DNA immobilization resulting in an increased guanine signal. The interaction of the analyte with the immobilized DNA was measured through the variation of the electrochemical signal of guanine by square wave voltammetry （SWV）. The biosensor was able to detect the known genotoxic compounds： 2-anthramine, acridine orange and 2- naphthylamine with detection limits of 2, 3 and 50 nmol/L, respectively. The biosensor was also used to test actual water samples to evaluate the contamination level. Additionally, the comparison of results from the classical genotoxiciw bioassay has confirmed the applicability of the method for real samoles.     

Oxygen-deficient titania as alternative support for Pt catalysts for the oxygen reduction reaction

Insufficient electrochemical stability is a major challenge for carbon materials in oxygen reduction reaction （ORR） due to carbon corrosion and insufficient metal-support interactions. In this work, titania is explored as an alternative support for Pt catalysts. Oxygen deficient titania samples including TiO2-x and TiO2_xNy were obtained by thermal treatment of anatase TiO2 under flowing H2 and NH3, respectively. Pt nanoparticles were deposited on the titania by a modified ethylene glycol method. The samples were characterized by N2-physisorption, X-ray diffraction and X-ray photoelectron spectroscopy. The ORR activity and long-term stability of supported Pt catalysts were evaluated using linear sweep voltammetry and chronoamperometry in 0.1 mol/L HC104. Pt/TiO2_x and Pt/TiO2_xNy showed higher ORR activities than Pt/TiO2 as indicated by higher onset potentials. Oxygen deficiency in TiO2-x and TiO2-xNy contributed to the high ORR activity due to enhanced charge transfer, as disclosed by electrochemical impedance spectroscopy studies. Electrochemical stability studies revealed that Pt/TiOE_x exhibited a higher stability with a lower current decay rate than commercial Pt/C, which can be attributed to the stable oxide support and strong interaction between Pt nanoparticles and the oxygen-deficient TiO2-x support.     

Preparation of Zeolite X Membranes on Porous Ceramic Substrates with Zeolite Seeds

Zeolite X membranes were investigated by in-situ hydrothermal synthesis on porous ceramic tubes precoated with zeolite X seeds or precursor amorphous aluminosilicate, and porous α-Al2O3 ceramic tubes with a pore size of 50-200 nm were employed as supports. Zeolite X crystals were synthesized by the classic method and mixed into deionized water as a slurry with a concentration of 0.2-0.5wt%, having a range of crystal sizes from 0.2 to 2μm. Crystal seeds were pressed into the pores near the inner surface of the ceramic tubes, and crystallization took place at 95℃ for 24-96 h. It was also investigated that Boehmite sol added with zeolite X seeds was precoated on ceramic supports to form a layer of r-Al2O3 by heating, and hydrothermal crystallization could then take place to prepare the zeolite membranes on the composite ceramic tubes. The crystal species were characterized by XRD, and the morphology of the supports subjected to crystallization was characterized by SEM. The composite zeolite membranes hav     

Luminescence Quenching Behavior of Oxygen Sensing ORMOSIL Films Based on Ruthenium Complex

An organically modified silicate(ORMOSIL) based optical sensor response to gaseous O2 or O2 dissolved in water is presented. The oxygen sensing film mechanism is based on the principle of fluorescence quenching of tris(4,7-diphenyl-l , 10-phenanthroline) ruthenium ( ) ([Ru(dpp)3]2+), which has been entrapped in a porous ORMOSIL film. In order to establish optimum film-processing parameters, comprehensive investigations, including the effects of the polarity and the hydrophobicity of the sensing film on oxygen quenching response and response time, were carried out. The film hydrophobicity increased as a function of dimethyl-dimethoxysilane (DiMe-DMOS) content, which is correlated with enhanced oxygen sensor performance. The sensor developed in the present work exhibits the advantages of fast response time and good reversibility. The detection limits are 0. 5 % and 0. 3 g/mL for O2 in the gaseous and the aqueous phases, respectively.     

Preparation of α-Fe2O3 Nanofiber via Electrospinning Process

A thin PVA/FeCl3 composite fiber was prepared by using sol-gel processing and electrospinning techniques. A nanofiber of α-Fe2O3 with the diameter of 50-150 nm was obtained via high temperature calcination of the PVA/FeCl3 composite fiber. The material was characterized by infra-red (IR) spectroscopy, X-ray diffraction(XRD), and scanning electron microscopy(SEM). The results show that the fiber after the calcination at 700℃ was a pure α-Fe2O3 nanofiber.     

Preparation and properties of magnetic alumina microspheres with a γ-Fe_2O_3/SiO_2 core and Al_2O_3 shell

Magnetic alumina composite microspheres with γ-Fe 2 O 3 core/Al 2 O 3 shell structure were prepared by the oil column method. A dense silica layer was deposited on the surface of γ-Fe 2 O 3 particles (denoted as γ-Fe 2 O 3 /SiO 2 ) with a desired thickness to protect the iron oxide core against acidic or high temperature conditions. γ-Fe 2 O 3 /SiO 2 /Al 2 O 3 particles with about 85 wt% Al 2 O 3 were obtained and showed to be suitable for practical applications as a magnetic catalyst or catalyst support due to their magnetic properties and pore structure. The products were characterized with scanning electron microscope (SEM) and transmission electron microscope (TEM), nitrogen adsorption-desorption, and vibrating sample magnetometer (VSM). The specific surface area and pore volume of the γ-Fe 2 O 3 /SiO 2 /Al 2 O 3 composite microspheres calcined at 500 ? C were 200 m 2 /g and 0.77 cm 3 /g, respectively.