Cun、Agn和Aun(n≤9)团簇的静电极化率

The static polarizabilities and polarizability anisotropies of Cun,Agn and Aun (n≤9)clusters have been calculated by the B3LYP density functional method,which is a three parameter mixture of density functional and"exact" Hartree Fock exchange. The calculated results are compared with experimental polarizabilities of sodium clusters. It is shown that the size dependency of the static polarizabilities per atom of Cun,and Agn clusters possesses the same trend as that observed in sodium clusters exception of the Aunclusters while the polarizability of Au atom is much smaller than these of Cu and Ag.The(α-)of Au atom is the smallest and the(α-)per atom of Au approach to the values of Cu from the dimmer to the hexamer. It indicates that in Au clusters the electrons are more strongly attracted by the nuclei because of the more electrons. However,the absolute polarizabilities of the noble mental clusters are considerably smaller than those of the sodium clusters and the electronic structures of the noblemental are much more compact.     

复合物Ca+-RNA碱基的结构与稳定性

Gas-phase metal ion affinities and optimized structures of RNA nucleic acid bases for the Ca+ were determined at a density functional level employing the hybrid B3LYP exchange correlation potential in connection with the 6-311+G(2df,2p) basis set. All the molecular complexes, obtained by the interaction between several low-lying tautomers of RNA nucleic acid and Ca+ on the different binding sites, were considered. For Cytosine, the most stable complex was obtained starting from the most stable tautomer of the free nucleic acid base tautomers. As to thymine, the bond energy of the ion with the most stable tautomer of the free nucleic acid base is the weakest among the three tautomer’s complexes, and that of the ion with least stable tautomer of the free nucleic acid base is the strongest . Uracil is similar to thymine. The two kinds of relation, bond energy and total energy for the complex, are in disagreement, as the metal affinities of RNA bases for the Ca+ depend on binding sites, and total energy of complex (Ca+-RNA base) relies on all atoms and their relative positions in the complex.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

氢气在炭狭缝微孔内吸附的预测

通过边界的平均场近似,推导二平板狭缝孔格子理论Ono-Kondo吸附等温方程.利用格子气模型特性和微观物理学理论,计算氢分子在石墨平面的最大吸附容量.比较由氢分子在石墨平面二典型聚集状态标定的Ono-Kondo方程,并用预测精度较高的方程计算了与文献相同条件下的吸附等温线.在比较了计算结果、试验结果和GCMC分子模拟结果后,对Ono-Kondo吸附等温方程的特点、理论基础作了分析,指出了方程的适用范围.     

Thermodynamics of dissolving and solvation processes for benzoic acid and the toluic acids in aqueous solution

Experimental data are presented for the solubility in water of benzoic and toluic acids from 5° to 65°C. From the solubility the molality of the monomeric form of the acid is calculated using literature data for both ionization and dimerization of the acid. These data for the monomer combined with data from the literature for vaporization of the solid and ionization in both the gas phase and the aqueous phase yield entropy and enthalpy changes for the solvation of molecular and anionic forms of the acid. A similar procedure is also applied to literature data for the solubility of benzene in water. It is shown that the hydration entropies of the monomeric forms are a linear function of their partial molar volumes. It is concluded that hydration of the undissociated o-toluic acid may be crucial to the increased acidity of that acid compared to benzoic acid.     

锌试剂与壳聚糖的结合反应机理的研究

为从分子水平认识多糖分子与小分子之间相互作用的机理,应用光谱法研究了壳聚糖(CTS)与锌试剂(ZCN)的相互作用机理;测得ZCN-CTS复合物吸收光谱出现新的吸收峰所需的临界ZCN/CTS摩尔比为2.67×103, CTS对ZCN的最大结合数为6.93×103,实验值与理论值相吻合,证明了多糖与生物探针相互作用理论模型的可靠性;探讨了ZCN与CTS相互作用产生变色反应的机理,认为其是在ZCN与CTS大分子间发生静电相互作用的基础上,主要由ZCN与CTS大分子间的疏水相互作用所引起.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

氢在Ni(511)台阶面的吸附与解离研究

The adsorption and dissociation of hydrogen on stepped surface (511) of nickel are studied with the embedded-atom model (EAM) method. The adsorption energy, the length of the adsorption bond and the adsorption height for a single hydrogen atom are calculated. Three kinds of stable sites are found for hydrogen adsorption. There are the double-fold bridge site B on the step edge, the three-fold hollow site H3′ on the step surface and the four-fold hollow sites H1 and H2 on the terrace surface. Compared with a hydrogen atom adsorbed on low-index (001) surface, there are two other adsorption sites near the step: the two-fold bridge site B on the step edge and the three-fold hollow site H3′ on the step surface. At the same time, the absorbability of the hydrogen atom at the site H1 is intensified. The results show that hydrogen adsorption on Ni (511) is affected by the existence of the step. The active barriers, adsorption energy and corresponding bond length for dissociation of a hydrogen molecule on the stepped surface are presented. The results show that the dissociation is easier at the bottom of the step. It is shown that the steps are the active sites for hydrogen adsorption and dissociation.     

TiO2膜光催化剂的改进及表征

提出用粉末-溶胶法制备TiO2薄膜型光催化剂,介绍了粉溶法的制备工艺及改变pH值对催化活性的影响.研究结果表明, 利用粉溶法或添加浓HNO3后制备的TiO2薄膜光催化剂表现出了较高的光催化活性.结合结构表征详细分析了其中的原因.认为粉溶法制备的催化剂表面更粗糙,比表面积增大,膜厚度减小,这些都可能是其催化活性提高的原因.而加酸后膜催化活性提高主要是因为酸性条件下表面几乎没有Ti3+表面态,利于光生电子与光生空穴的分离.     

反相微乳液模板原位聚合制备纳米氯化银/聚甲基丙烯酸甲酯及其结构表征

用甲基丙烯酸甲酯(MMA)作油相,反相胶束微乳液作为模板,制备了纳米氯化银(AgCl)粒子,再进行原位聚合制备了纳米氯化银/聚甲基丙烯酸甲酯(AgCl/PMMA)复合材料.透射电镜(TEM)分析表明,纳米AgCl的尺寸为20～80 nm.扫描电镜(SEM)测试表明纳米AgCl粒子均匀地存在于PMMA基材中.红外分析证明,胶束中水和表面活性剂AOT的羰基在MMA聚合后微观环境发生变化,纳米粒子同聚合物之间有吸附行为.动态力学(DMTA)分析复合材料,发现纳米AgCl粒子与聚合物之间存在强烈相互作用,形成了中间相层(interphase layer),改变了聚合物的动态力学性能.     

线性反馈抑制螺旋波

A class of excitable media described by the Fitzhugh-Nagumo equation is investigated. Based on the stable and self adaptive theory, the error between the systems grid variables and the standard sampling of the periodical signal or constant signal was feed back into the system both globally and locally. When the controller was then shut off, automatically, the whole system became homogeneous. Additionally, the scheme was tested under noisy conditions. The numerical simulations results demonstrate its effectiveness. The system reached a homogeneous state and a spiral wave was converted into a target wave, resulting in a wonderful pattern emerging using a different controller. The scheme proved robust in resisting the effects of noise.     

碱性介质中葡萄糖在铂电极上的阳极氧化

为了进一步探明葡萄糖在铂电极上的氧化机理,用循环伏安法(CV)在-0.9～0.4 V(相对于饱和甘汞参比电极)内研究了葡萄糖在铂电极上催化氧化行为,首次详细报道了葡萄糖在电化学氧化过程中的电位振荡现象,并用电流扫描法表征了葡萄糖的电位振荡情况.电流扫描结果表明,在较慢的电流扫描速度下,电极过程出现了明显的电位振荡.说明电极上产生了毒化中间物,电位振荡是由于毒化中间物在电极上的吸附和在高电位下氧化除去引起的.     

周期扰动位相对化学振荡的调制效应

由Rossler反应系统的理论模型出发,构造一种具有外部周期扰动的新动力学系统,并采用逆算符法和数值分析法研究该系统的振荡态在周期扰动调制下的动力学行为.结果表明,在周期扰动的调制下,系统的状态由单周期振荡态(1p)变为周期2(2p)、周期4(4p)等多周期振荡态以及混沌态.扰动位相是系统呈现上述多种演化模式的控制参数,在扰动位相不同的数值区间,系统呈现的演化模式不同,而且扰动位相数值的微小改变,还影响每种演化模式的内部结构.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

表面张力对PEO稀溶液粘度行为的影响

测定了不同分子量聚氧化乙烯(PEO)在水和苯溶剂中的粘度,发现在低浓度区PEO水溶液的比浓粘度出现负偏离, PEO苯溶液比浓粘度与浓度之间依旧满足线性关系.表面张力测定结果表明, PEO分子显著降低了水的表面张力,而苯的表面张力则不受影响.PEO水溶液和纯溶剂水表面张力的不同干扰了高分子溶液和溶剂在粘度计中流过时间的测量,导致低浓度区PEO水溶液比浓粘度出现负偏离.利用PEO水溶液和水表面张力测定结果,结合乌式粘度计的几何尺寸,定量分析了PEO水溶液和纯溶剂水表面张力的差异对粘度测量结果的影响,计算结果与实验结果基本相符.如果用PEO水溶液流过时间对浓度作图的外推值t0*计算相对粘度,可以完全消除PEO水溶液和水表面张力差异对粘度测量的影响.     

Chemical heterogeneity in emulsion copolymers of carboxylic monomers

Copolymer latices of butylacrylate (BA) with acrylic and methacrylic acid (AA and MAA) were prepared by batch type emulsion polymerization, and, for comparison, copolymers with identical monomer composition were prepared by batch type solution polymerization.The distribution of the carboxylic monomers in the latex particles and the serum was studied by density gradient and sedimentation experiments with the analytical ultracentrifuge. Dynamic mechanical measurements of films of these copolymers were used to determine the storage and loss moduli as a function of temperature. From these measurements the position and extension of the glass transition range on the temperature scale is obtained. For heterogeneous emulsion copolymers with two glass transition temperatures the distribution of the carboxylic monomer units in the different copolymer phases can be determined. Electron microscopy of ultra thin cross-sections of stained films gave further insight into the film morphology.The combination of the results obtained with the different methods gives rise to the following clues: In the BA/AA latices about 40% (by weight) of the total AA used in the recipe are found in the serum as a water soluble polymer, about 50% are found to increase the glass transition temperatureT _g of the bulk of the BA copolymer and, therefore, are thought to be incorporated into the interior of the latex particles, and the remaining 10% are, conclusively, located on the particle surface.In the BA/MAA latices no water soluble copolymer could be detected in the serum, about 90% of the MAA used is found in the bulk of the copolymer, and about 10% form a second hard phase on the surface of the latex particles.Dynamic mechanical measurements on the copolymer latex films show at least two phases with different glass transition temperatures: the bulk of the copolymer with a relatively low content of (M)AA units and a glass transition range at low temperatures, and a second (M)AA rich phase with a highT _g.The latter phase forms a honeycomb-like structure surrounding the packed latex particles. That results in a three-dimensional network of polymer with a highT _g extending throughout the latex film. In spite of the fact that this phase is built from a small fraction of the total copolymer only, it has a very pronounced influence on the performance behaviour of latex films.Dedicated to Professor Dr. R. Manecke on the occasion of his 70th birthday.     

Theoretical study of dielectric behavior of microcapsule suspensions with distributed drug release rate

Theoretical consideration is made concerning the dielectric behavior of aqueous suspensions of W/O-type microcapsules containing aqueous electrolyte solutions, especially concerning distribution effects of the electrolyte release rate on the dielectric behavior.It is shown at first that the distribution of the release rate causes electrical conductivity of the capsule interior. Next, it is deduced, in the light of a theory of the interfacial polarization, that the distribution characteristics of the capsule interior's electrical conductivity are closely related to those of the relaxation time for a dielectric relaxation exhibited by the suspensions. Several formulas are derived to describe the relation between the distribution characteristics of the release rate and those of the relaxation time.     

A real-time drawing study on solution-crystallized UHMW-polyethylene — comparison with conventional x-ray results

Solution-crystallized ultra-high molecular weight polyethylene (UHMW-PE) can be drawn in the solid state to very high draw ratios, leading to materials with excellent mechanical properties. Very recently, the drawing process has been studied via different x-ray techniques, on the basis of which a deformation mechanism was proposed which could satisfactorily explain all observations. However, like most deformation studies performed in the past, the measuring conditions were quite different from the actual drawing conditions. Cooling drawn samples to room temperature as well as relieving the stretching force may give rise to the introduction of artefacts, leading to misinterpretation of the results. In order to exclude this possibility an x-ray study was performed on solution-crystallized UHMW-PE in real time, i.e.,during the deformation process, using the benefits of synchrotron facilities. Comparison of these results with x-ray results obtained via the conventional method shows that the latter method can be used without any problems for a qualitative study on the solid state drawing of ultradrawable UHMW-PE. One of the major advantages of the real-time method is the possibility to study the initial elastic deformation region.Presented in part at the Rolduc Polymer Meeting-2, April 1987, Kerkrade, The Netherlands.     

Discussion of craze formation and growth in amorphous polymers in terms of the multiplicity of glass transition at low temperatures

A craze, the typical deformation zone in an amorphous polymer, can be divided into a precraze and a proper craze. A better understanding of the two corresponding formation processes is possible in terms of glass transition multiplicity.The precraze is associated with the molecular mobility in the confined flow zone, which is part of the main transition. The proper craze corresponds to the mobility in the flow transition zone (terminal zone for shear). A negative pressure generated by nonuniaxial stress is considered to be important for the maintainance of the molecular mobility in these zones belowT _g . The behavior of the zones at negative pressure and low temperatures Tg is considered using a pressure-temperature diagram. The fibril structure of crazes is discussed by a defect diffusion model for the proper glass transition; it is correlated with the sequential physical aging of the corresponding frozen structural defects. Typical mode lengths of the molecular mobilities in the different zones are compared with typical craze parameters. The structure of the craze material is considered to result from confined flow processes which cannot percolate because in the main transition the flow is confined by entanglements, and in the flow transition zone the flow is stopped by releasing the negative pressure due to crack propagation.     

电子传输材料1,3,4-哐恶二唑衍生物和1,2,4-三唑衍生物的DFT研究

The simplest organic light-emitting-diode (OLED) device is a two layer device of: ITO/HTL/ETL/Mg: Ag, in which HTL or ETL can act as light emitter. The mobilities of charge are important in optimizing the performance of OLED devices, as high mobilities reduce the resistance of the device leading to greater power efficiency. The electron-transport in the organic solid can be viewed as an electron hopping process. By means of DFT (B3LYP) methods, the structures of two kinds of electron-transport materials in neutral, cationic and anionic states were optimized. The results suggest that the process of electronic transmission of 2,5-diphenyl-1,3,4-oxadiazole is mainly the N→O transferences, the process of electronic transmission of 3,4,5-triphenyl-1,2,4-triazole is mainly the N(double linkage)→N(single linkage) transferences and the transition from the triazole ring to the benzene ring connected with the N atom. The third position of the benzene ring was substituted by the electron acceptor groups, the electronic transmission performance was enhanced, while it was substituted by the electron donor groups, the electronic transmission performance was reduced.