疏水球状碳酸钙的制备、表征及对聚丙烯力学性能的影响

以十二碳醇磷酸酯(DDP)为改性剂, 采用碳化法制备了分散性良好的球状碳酸钙粒子. 通过FESEM, XRD, FTIR及活化度和接触角测试对产物进行了表征. XRD分析结果表明, 随着DDP添加量的增加, 所得CaCO3由方解石型向文石型转变. FTIR结果表明, 改性剂与碳酸钙表面是以化学键合和物理吸附方式相结合. 当DDP含量达到2%时, 接触角为120.43°, 活化度达到99%, 碳酸钙粒子由亲水性转变为完全疏水性. 考察了反应温度和DDP含量对产物形貌与结晶行为的影响, 并对改性机理进行了初步探讨. 将产品填充到聚丙烯(PP)中, 测定了PP的力学性能.     

聚马来酸酐高级脂肪醇酯的合成及其对聚乙烯的表面改性研究

采用溶液聚合的方法合成聚马来酸酐，考察不同聚合条件对聚马来酸酐产率的影响。将所合成的聚马来酸酐与十八醇、十六醇和十四醇进行酯化反应合成了三种两亲性的大分子表面改性荆聚马来酸酐十八醇酯(PMAO)、聚马来酸酐十六醇酯(PMAH)和聚马来酸酐十四醇酯(PMAT)。对这三种聚马来酸酐高级醇酯／聚乙烯共混体系的表面亲水性进行了研究，采用全反射红外光谱对聚马来酸酐高级醇酯共混体系薄膜进行表征，发现聚马来酸酐高级醇酯可以在聚乙烯薄膜表面富集，接触角测量表明聚马来酸酐高级醇酯的加入可以有效降低聚乙烯薄膜的水接触角。     

水相湿法改性纳米碳酸钙表面性质的研究

用特定的表面改性剂在水相中对纳米碳酸钙的悬浮液进行了湿法改性。红外光谱和热失重分析证明,改性剂与碳酸钙之间以化学键结合;沉降体积和接触角的测定结果说明改性粒子在液体石蜡中的润湿性和疏水性得到了提高;透射电子显微镜照片显示改性粒子在液体石蜡中有更好的分散性;体系粘度实验表明改性粒子与液体石蜡之间有较好的相容性。     

废橡胶粉的表面改性及其表征

研究了二氯异氰尿酸钠对废橡胶粉表面的改性,得到的活化改性胶粉可作为复合材料添加剂用于制备新型复合材料.用扫描电镜(SEM )、接触角方法、X射线光电子能谱(XPS)对改性胶粉进行表征,并且研究了反应时间、反应温度和改性剂用量因素对改性反应的影响.结果表明,反应的最佳条件为反应时间1.5 h、反应温度40℃、改性剂质量分...     

聚偏氟乙烯接枝甲基丙烯酸甲酯油水分离膜的研究

使用四乙基氢氧化铵(TEAH)液相本体改性聚偏氟乙烯(PVDF),以过氧化苯甲酰(BPO)为引发剂,将甲基丙烯酸甲酯(MMA)接枝到改性PVDF骨架上,合成聚偏氟乙烯接枝聚甲基丙烯酸甲酯(PVDF-gPMMA)共聚物,通过浸没沉淀法制备PVDF-g-PMMA亲水性油水分离膜.通过傅里叶红外光谱(FTIR)、扫描电镜(SEM)和过滤试验分析了膜的结构和性能.同时研究了TEAH浓度和改性时间对PVDF-g-PMMA膜表面接触角的影响.结果表明,TEAH使PVDF脱去HF产生碳碳双键且MMA成功接枝到改性的PVDF骨架上,膜内外孔隙分布均匀;PVDF-g-PMMA膜的接触角随着TEAH浓度的增加、改性时间的加长而减小.TEAH浓度为2.0 wt%,改性20 min制备的PVDF-g-PMMA膜,接枝率为27.1%,孔隙度为71.6%,平均孔径为78.9 nm,接触角降至55.9°,且在50 s内降为0;纯水通量提高到665.34 L/(m2·h),截留率和水通量恢复率分别达到95.6%和90.1%.与纯PVDF膜相比,PVDF-g-PMMA膜的分离性能显著提高.     

氨基硅油改性聚醚型聚氨酯

以甲苯二异氰酸酯、聚氧化丙烯二醇、氨乙基氨丙基聚二甲基硅氧烷为原料在无溶剂条件下合成了有机硅改性聚氨酯预聚体 ,用红外光谱对其进行了表征。以 3,3′ 二氯 4 ,4′ 二氨基 二苯基甲烷复合固化剂固化得氨基硅油改性聚氨酯材料 ,对材料的力学性能、耐热性、表面水接触角测试等表明 ,改性聚氨酯在ω(氨基硅油 ) =3%～ 15 %时 ,有较明显的改性效果 ,且在ω(氨基硅油 ) =10 %时 ,具有最佳综合性能 ,其拉伸强度和伸长率较未改性的分别提高 31%和 5 2 % ,表面水接触角提高了 2 3° ,耐热性也有所提高     

ZSM-5高硅分子筛硅烷化疏水改性的研究

以甲苯为溶剂,正辛基三乙氧基硅烷(OTS)为改性剂,进行了ZSM-5高硅分子筛疏水改性研究。通过傅立叶红外(FT-IR)、X射线粉末衍射(XRD)、N2吸附-解吸附、静态水接触角、水与正己烷的静态吸附,以及水热稳定性试验等测试了改性前后样品结构与性能。结果表明,通过硅烷化改性在ZSM-5上接枝了-Si(CH2)7CH3基团,并实现了超疏水性。当0.8g ZSM-5使用0.24g改性剂时,改性后分子筛的接触角达152°,水吸附量下降了1.49%,比表面积、孔容、孔径分别减小了62.7m2/g、0.0329cm3/g、0.42nm,孔道长程有序性有所降低,且具有较高的水热稳定性。     

马来酸酐(MAH)表面改性纳米碳酸钙粉体的制备及表面性能

通过在两相法制备纳米碳酸钙的过程中添加一定量的马来酸酐(MAH)的方法，在纳米碳酸钙的表面引入羧基、羟基、双键等活性基团对纳米碳酸钙进行表面改性，并通过调节马来酸酐的用量，有效地控制纳米碳酸钙的极性和表面能。接触角实验结果表明，当马来酸酐的加入量为2%时可以获得界面性能最理想的改性纳米碳酸钙。还在此基础上提出了马来酸酐(MAH)对纳米碳酸钙进行表面改性的过程机理，并以SEM，ATR-FTIR和TGA等手段对上述过程机理进行了验证。     

聚对苯二甲酸乙二醇酯/碳酸钙纳米复合材料的制备和表征

以聚乙二醇磷酸酯1000为表面处理剂, 采用碳化法合成了方解石型碳酸钙纳米粒子, 进一步制备了聚对苯二甲酸乙二醇酯/碳酸钙纳米复合材料. 采用透射电子显微镜(TEM)、 X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR), 场发射扫描电子显微镜(FESEM)和热重分析(TGA)对样品进行了分析. 结果表明, 聚乙二醇磷酸酯1000成功地修饰到碳酸钙的表面, 并得到平均直径为60 nm, 形貌为立方体的纳米碳酸钙晶体. 与碳酸钙(空白)样品相比, 表面处理碳酸钙的复合材料表现出更好的分散性和热稳定性. 采用Friedman方法计算了复合材料热分解的活化能. 聚对苯二甲酸乙二醇酯、 聚对苯二甲酸乙二醇酯/空白碳酸钙和聚对苯二甲酸乙二醇酯/表面处理碳酸钙的活化能分别为200.58, 214.86和219.50 kJ/mol, 进一步说明了表面处理碳酸钙更好地改善了聚对苯二甲酸乙二醇酯的热稳定性.     

多孔α-Al_2O_3载体上Silicalite-1膜的表面改性与选择性透醇分析

分别使用十二烷基三甲氧基硅烷(DMS)和硬脂酸(STA)对α-Al2O3载体上二次生长合成的silicalite-1膜进行修饰,提高其表面疏水性。红外光谱和接触角测试结果表明,改性剂以化学键的形式结合于分子筛膜表面,膜表面由亲水变为疏水。表面改性的最佳预处理温度为150℃,改性剂的最佳质量分数为10%。进一步研究了膜表面润湿特性和热稳定性,其中DMS改性后的分子筛膜在空气中经250℃高温处理后仍保持疏水性不变。在乙醇/水分离应用中,高温脱除模板剂后缺陷的孔径分布在1~5nm,表面改性后乙醇分离因子较改性前提高5倍,最高可达21.6。     

In situ synthesis and modification of calcium carbonate nanoparticles via a bobbling method

Modified calcium carbonate (CaCO3) nanoparticles with cubic- and spindle-like configuration were synthesized in situ by the typical bobbling (gas-liquid-solid) method. The modifiers, such as sodium stearate, octadecyl dihydrogen phosphate (ODP) and oleic acid (OA), were used to obtain hydrophobic nanoparticles. The different modification effects of the modifiers were investigated by measuring the active ratio, whiteness and the contact angle. Moreover, transmission electron microscopy (TEM), X-ray diffracti...     

<Emphasis Type="Italic">In situ</Emphasis> synthesis and modification of calcium carbonate nanoparticles via a bobbling method

Modified calcium carbonate (CaCO₃) nanoparticles with cubic- and spindle-like configuration were synthesized in situ by the typical bobbling (gas-liquid-solid) method. The modifiers, such as sodium stearate, octadecyl dihydrogen phosphate (ODP) and oleic acid (OA), were used to obtain hydrophobic nanoparticles. The different modification effects of the modifiers were investigated by measuring the active ratio, whiteness and the contact angle. Moreover, transmission electron microscopy (TEM), X-ray diffraction (XRD) and thermogravimetry analysis (TGA analysis) were employed to characterize the obtained products. A preliminary reaction mechanism was discussed. According to the results, the active ratio of CaCO₃ modified by ODP was ca. 99.9% and the value of whiteness was 97.3% when the dosage of modifiers reached 2%. The contact angle was 122.25° for the CaCO₃ modified in the presence of sodium stearate, ODP and OA. When modified CaCO₃ was filled into PVC, the mechanical properties of products were improved greatly such as rupture intensity, pull intensity and fuse temperature. The compatibility and affinity between the modified CaCO₃ nanoparticles and the organic matrixes were greatly improved. Supported by the National Natural Science Foundation of China (Grant No. 50372025)     

共沸蒸馏法制备表面化学改性氢氧化镁纳米颗粒

首次将表面改性剂如硬脂酸、硬脂酸锌或稀土偶联剂加入到传统的共沸蒸馏体系中,使Mg(OH)2纳米颗粒的表面改性和干燥过程同时完成。 通过 XRD、TEM、FT-IR、TG和CAM（接触角测试）等技术手段对样品的结构、形貌和性质进行了表征。 结果表明,表面改性剂不但能够和Mg(OH)2纳米颗粒的表面的OH-离子发生化学反应形成表面修饰层, 减少硬团聚现象,而且还使纳米颗粒表面由亲水性变为疏水性。 另外,对共沸蒸馏法制备表面改性纳米颗粒的机理进行了讨论,为纳米颗粒表面改性提供了一种新思路。     

Surface modification of polypropylene membranes by γ-ray induced graft copolymerization and their solute permeation characteristics

Porous hydrophobic polypropylene (PP) membranes were subjected to the surface modification by the γ-ray induced graft copolymerization with hydrophilic 2-hydroxyethyl methacrylate (HEMA). The structural changes and surface morphologies of the modified PP membranes were characterized by a Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA) and field emission scanning electron microscopy (FE-SEM). Peroxides produced from γ-ray irradiation were determined by a 1,1-diphenyl-2-picryl hydrazyl (DPPH) method and the surface hydrophilicities of membranes were measured by a static contact angle measurement. The contact angle of the modified membranes reduced with the degree of grafting (DG) of HEMA onto the membrane surface, and it decreased up to about half of that before modification. The permeation behaviors of all membranes were investigated by a bovine serum albumin (BSA) filtration experiment. As a result, the DG of the modified membrane increased with the reaction time. However, in the case of irradiation dosage it showed the maximum value at 20 kGy. Also, the modified membrane showed a higher solution flux, lower BSA adsorption, and the better flux recovery after cleaning than that of the unmodified membrane. Particularly, 40.6% grafted membrane showed a two-fold increase in a BSA solution flux, 62% reduction in total fouling and three-fold increase in flux recovery after chemical cleaning.     

高分子基质作用下多孔碳酸钙的仿生合成

依据生物矿化的基本原理,通过仿生合成的方法,以聚丙烯酰胺作为基质合成了一种有机、无机复合的多孔碳酸钙材料.用X射线粉末衍射(XRD)分析、扫描电子显微镜(SEM)、傅里叶变换红外吸收光谱(FT-IR)和电导率测定等手段对所得复合碳酸钙进行了表征,结果发现该多孔CaCO3晶体为方解石型,并且在结晶过程中,聚丙烯酰胺与CaCO3之间存在着相互作用,本文讨论了这种作用的可能机理.     

链状纳米碳酸钙的原位制备及其性能表征

采用间歇式鼓泡碳化法,以油酸为添加剂,通过对实验条件的控制,原位制备了由小立方体晶粒连接而成的链状纳米碳酸钙,粒子的长径比约为6∶1,分散性良好、白度高、吸油值低,并对其碳化反应机理进行了初步探讨。同时,通过电子透射电镜、X射线衍射、傅里叶红外光谱、白度和吸油值等测试手段对产物的结构和性能进行了表征。     

纳米/微米碳酸钙的结构表征和热分解行为

采用棕榈酸对纳米碳酸钙进行有机表面改性, 运用SEM﹑TEM、XRD、FTIR 及TG-DTG 对表面改性前后的纳米碳酸钙进行表征, 并与微米碳酸钙的微晶结构及热分解特性进行比较. FTIR 分析结果确证了棕榈酸与纳米碳酸钙表面是以化学键合和物理吸附方式相结合, 粒子表面存在羧基等有机官能团的红外吸收特征. 对比研究发现, 碳酸钙微晶纳米化后, 其红外V3特征吸收峰出现约35 cm-1 的蓝移现象, 并且明显窄化. 初步解释了纳米碳酸钙红外吸收峰蓝移的原因, 认为尺寸效应和晶体场效应是影响纳米碳酸钙红外光谱特征的主要因素. 微晶结构的变化使得纳米碳酸钙的热分解反应表现出反常特性, 热分解温度较微米碳酸钙下降了40.6 ℃.     

Mitigated membrane fouling in an SMBR by surface modification

Fouling is a major obstacle in membrane processes applied in membrane bioreactor. To improve the antifouling characteristics of polypropylene hollow fiber microporous membranes (PPHFMMs) in a submerged membrane bioreactor (SMBR), the PPHFMMs were surface modified by NH₃, CO₂ plasma treatment, photoinduced graft polymerization of acrylamide and acrylic acid. The structural and morphological changes on the membrane surface were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflection-Fourier transform infrared spectroscopy (FT-IR/ATR) and field emission scanning electron microscopy (FE-SEM). The change of surface wettability was monitored by contact angle measurements. The results of XPS and FT-IR/ATR clearly indicated the successful modification on the membrane surface. The static water contact angle of the modified membrane reduced obviously. The antifouling characteristics of the modified membranes in an SMBR were evaluated. The modified membranes showed better filtration performances in the submerged membrane bioreactor than the unmodified one, and the acrylic acid-grafted membrane presented the best antifouling characteristics. The results demonstrated that (1) the surface carboxyl-containing membranes were better than the surface amido-containing membranes; (2) surface-grafted membranes were better than the plasma-treated membranes.     

以L-组氨酸为模板仿生合成针状纳米碳酸钙

依据仿生合成原理, 以L-组氨酸为有机基质, 无水氯化钙和无水碳酸钠为原料, 通过简单的复分解反应制备出了平均直径约为80 nm, 长径比约为12∶1的针状纳米碳酸钙晶体. 利用高分辨扫描电子显微镜(FESEM)、X射线衍射仪(XRD)、傅里叶红外光谱议(FTIR)对产物进行了表征, 结果表明, 在不添加有机基质的溶液中得到立方状微米级的碳酸钙晶体, 添加L-组氨酸后得到针状纳米级的碳酸钙晶体, 并对L-组氨酸在仿生合成针状纳米碳酸钙过程中的作用机理进行了初步探讨.