三溴甲基芳烃合成新方法的研究

报道了一种以三氯甲基芳烃与三溴化硼反应制备系列三溴甲基芳烃的新方法. 该方法反应条件温和, 收率高, 选择性好. 同时, 对影响该反应的因素进行了研究, 发现当芳环上连有强吸电子基团时, 不利于反应的进行, 而连有推电子基团时, 则有利于反应进行; 当取代基处于邻位时, 则明显阻碍反应的进行. 采用这种方法已合成了十多个三溴甲基芳烃, 其中1个是未见文献报道的新化合物.     

7-O-取代-8-甲基香豆素和4H-色烯-4-酮化合物与NBS/CCl_4试剂的溴化反应

7-O-取代-8-甲基香豆素和4-H-色烯-4-酮化合物是合成Seco-DCK和Seco-DCP类似物的重要中间体.报道了在NBS/CCl4条件下,这两类化合物8-位甲基溴代反应的情况.通过实验发现,这两类化合物8-位甲基溴代反应较一般芳环苄位的溴代更为复杂,存在多个反应位点.影响8-位甲基溴代选择性和收率的主要因素有三:邻位基团空间位阻大小、自由基引发催化剂的使用与否以及邻位基团的电性因素.通过控制反应条件,可以中等收率得到8-位甲基溴代化合物.     

活性炭载铁催化剂作用下几种典型芳烃一步氧化羟基化反应研究

以过氧化氢为氧化剂, 在乙腈介质中研究了几种典型芳烃的一步羟基化反应, 考察了底物取代基的供吸电子性质、 空间位阻等对羟基化反应的影响, 并推测了其反应机理.     

强碱阴离子交换树脂合成及热稳定性能研究

氯甲基化聚苯乙烯树脂与不同的叔胺反应制备了含不同季铵基团的强碱树脂.将氯甲基化聚苯乙烯树脂进行硝化、溴化反应后,再用三甲胺进行季铵化制备了苯环上含有吸电子基团的强碱树脂,测定了所制备树脂在水中的热稳定性.结果表明,位阻较大的季铵表现出较高的热稳定性;硝化、溴化后的树脂热稳定性有一定改善;而热重分析表明苯环上引入吸电子取代基不利于提高碱基在高温下的稳定性.     

芳酸及其衍生物的三氯甲基化反应的研究

首次报道了以四氯苯膦为转化剂或采用二氯苯膦与五氯化磷相结合, 将芳酸或芳酰氯转化为三氯甲基芳烃. 同时, 对影响反应的因素进行了研究, 发现连有推电子基的二氯苯膦有促进反应的作用, 而连有吸电子基团则减缓反应的进行, 而反应底物(芳酸或芳酰氯)的结构效应则相反: 连有吸电子基的芳酸有利于反应, 而连有推电子基团则减缓反应的进行. 此外, 发现反应中生成的苯膦酰二氯可作为催化剂重复使用, 并对转化反应的条件进行了改进与优化, 合成出9个三氯甲基芳烃, 其中2个是未见文献报道的新化合物.     

室温下二氧化氮催化带有给电子取代基的苯和萘的氧化溴化

在室温下,以8.2%的二氧化氮为催化剂,反应管中残留的空气为氧化剂,分子溴为溴化试剂,研究了带有给电子取代基的苯和萘的氧化溴化.使用的低沸点非金属催化剂易于从产物中去除,很少玷污最终产品;但反应后有少量的苯环硝化副产物生成,这会造成催化剂二氧化氮的损耗.反应具有较高的原子经济性,大部分溴原子被转化到产物中.反应产物具有可控性:可通过改变溴源的用量,分别得到单溴化和二溴化产物.初步的机理分析结论为:反应可能经历分子溴和芳环的反应,生成溴代芳烃和溴化氢;然后在氧化氮类物种催化下,生成的溴化氢被氧气氧化为具有反应活性的溴.     

钯催化溴代水杨醛与吡啶硼酸的Suzuki交叉偶联反应

通过研究不同种类钯催化剂[Pd(dppf)2Cl2,Pd(OAc)2,Pd(PPh3)4]、碱(Na2CO3,Na HCO3,K2CO3,K3PO4,Cs2CO3,Cs F)、溶剂(DME/H2O,DMF/H2O,Dioxane/H2O)及温度(70,80,100℃)对5-溴-3-叔丁基水杨醛与吡啶-4-硼酸制备5-(4-吡啶)-3-叔丁基水杨醛化合物的Suzuki偶联反应的影响,开发出一种高效催化吸或供电子基取代的芳基硼酸与吸电子基取代的溴代芳烃的偶联反应的方法,该反应在Pd(PPh3)4,K2CO3,Dioxane/H2O(V∶V=4∶1)、80℃的条件下产率达到97%,且具有分离简单、重现性好的特征;但对供电子基取代的溴代芳烃参与的反应催化效果一般.     

2,5-二芳基噻吩类化合物的高效绿色合成

无需金属和碱的催化,以1,4-二芳基取代-1,3-丁二炔与Na2S·9H2O为反应底物,80℃下DMF中合成了2,5-二芳基噻吩类化合物,考察了反应物苯环上电子效应和空间位阻对硫杂环化反应的影响.结果表明:反应物苯环上的吸电子或电子取代基团均对反应产物的分离产率影响不大;空间位阻较大的反应底物硫杂环化反应的收率略有降低,各种目标化合物产率为88%~100%.     

α-硼取代羰基类化合物的合成进展

硼取代羰基类化合物传统被认为是热力学上不稳定的化合物,容易发生1,3-硼迁移.近年来,随着对sp3杂化的硼或是四配位硼基团的研究深入,合成稳定且可分离的α-硼取代羰基类化合物的方法被逐渐发展.这些方法包括利用重氮酸酯、硫叶立德等卡宾前体对硼烷的插入反应, α,β-不饱和羰基类化合物的自由基硼氢化反应,以及含硼化合物的后阶段结构修饰反应等.根据不同的反应类型,对近年来合成α-硼取代羰基类化合物的反应进行了综述,并对现有的挑战及未来的研究方向进行了讨论.     

1,3-偶极环加成反应合成1-(取代苄基)-1,2,3-三唑类化合物

利用苄氯和取代苄氯与叠氮化钠的亲核取代反应合成了一系列苯环上带有不同取代基团的苄基叠氮化合物,亲核取代反应速率受苯环上取代基的影响:吸电子基团的存在,可以促使反应更容易进行.合成的叠氮化合物与苯乙炔经1,3-偶极环加成反应得到了相应的取代苄基1,2,3-三唑类化合物,反应条件温和.这些1,2,3-三唑类目标化合物具有对热稳定的优点.用红外、核磁、元素分析、质谱等对合成的叠氮化合物和1,2,3-三唑类化合物的结构进行了表征,重点研究了1,3-环加成反应的规律.加成反应速率取决于叠氮化合物(偶极物)的极性,即与取代基的电负性有关:苯乙炔(亲偶极物)易于与缺电子的叠氮反应,反之亦然.同时在反应过程中观察到空间位阻效应:反应可以生成两种同分异构体,其中4-苯基-1,2,3-三唑是主要产物.     

Benzylic Bromination of Toluene Derivatives with Boron Tribromide

A facile method for the benzylic bromination of toluene derivatives was developed. Various substituted toluenes were brominated with boron tribromide as bromine source in carbon tetrachloride at room temperature, affording their corresponding benzyl bromides in good yields.     

Synthesis of quaternary ammonium tribromides: a novel green approach

Abstract

Potassium permanganate (KMnO₄) oxidizes quaternary ammonium bromides to the corresponding tribromides conveniently and effectively. The procedure adopted is environmentally friendly as it is solvent-free. High purity, excellent yield, shorter reaction time and mild reaction conditions are some of the advantages of this synthetic protocol. The efficacy of quaternary ammonium tribromides, especially benzyltrimethylammonium tribromide, is also studied for bromination of some organic substrates.     

Phase-vanishing reactions that use fluorous media as a phase screen. Facile,controlled bromination of alkenes by dibromine and dealkylation of aromatic ethers by boron tribromide

In fluorous triphasic reactions, such as bromination of alkenes by dibromine and dealkylation of aromatic ethers by boron tribromide, the middle fluorous phase acts as a liquid membrane permitting passive transport of the reagents at the bottom to the top layer involving the substrates, thereby regulating the reactions.     

Ammonium persulphate promoted synthesis of polyethylene glycol entrapped potassium tribromide and its application in acylation and bromination of some selective organic compounds

In this study, a new method of synthesis of polyethylene glycol supported potassium tribromide (PEG KBr3) and its application in acylation and bromination reactions are reported. Ammonium persulphate oxidizes KBr to the corresponding tribromide which is entrapped by polyethylene glycol leading to stable PEG KBr3. The reagent is proved to be highly efficient for the acylation of variety of alcohols and bromination of activated aromatic substrates. Themethod is a mild, one pot reaction and involves no use of toxic reagents.     

A new reaction of aryl aldehydes with aryl acetylenes in the presence of boron trihalides

[reaction: see text]. The reactions of aryl aldehydes with 2 equiv of arylacetylenes in the presence of boron trichloride yield (E,Z)-1,3,5-triaryl-1,5-dichloro-1,4-pentadienes. Reactions carried out in the presence of boron tribromide generate the corresponding (Z,Z)-1,3,5-triaryl-1,5-dibromo-1,4-pentadienes.     

A novel route to geminal dibromocyclobutanes: syntheses of 2-substituted cyclobutanone acetals and their reaction with boron tribromide

Nine 2-substituted cyclobutanone acetals, in addition to the parent cyclobutanone acetal, were synthesized from their corresponding cyclobutanones and subsequently treated with boron tribromide. The substituents were either alkyl chains or a phenyl and a benzyl group, respectively. The major compounds obtained in these reactions were, in most cases, the geminal dibromocyclobutanes which were obtained in yields between 50 and 73%. A 2-fold excess of BBr3 and a reaction time of 3 h at -78 degrees C afforded the best yields. In four cases no dibromide formation was observed at all, and the cyclobutanone acetals were hydrolyzed to the corresponding cyclobutanone. This is probably due to increased steric hindrance of the acetal and BBr3 in the transition state.     

Bromination of alkylbenzenes in 1-butyl-3-methylimidazolium bromide and its dibromide complex

Alkylbenzenes were subjected to bromination with molecular bromine using 1-butyl-3-methylimidazolium bromide as solvent. A complex of 1-butyl-3-methylimidazolium bromide with bromine was synthesized. It ensured bromination of alkylbenzenes with no bromine and solvent. The results of bromination in binary solvents and ionic liquids, 1-butyl-3-methylimidazolium bromide and tribromide were compared. The bromination of ethylbenzene with 1-butyl-3-methylimidazolium tribromide was accompanied by formation of a considerable amount of α-bromoethylbenzene, which is not typical of electrophilic aromatic substitution process.     

Cetyltrimethylammonium Bromide as an Efficient Catalyst for Regioselective Bromination of Alkoxy Naphthalenes with Trimethyl Benzyl Ammonium Tribromide: Synthetic and Kinetic Approach

Bromination of 2‐alkoxynaphthalene (2‐ANP) and its derivatives with trimethyl benzyl ammonium tribromide (TMBATB) did not proceed smoothly even under reflux conditions. But the addition of microconcentrations of cetyltrimethyl ammonium bromide (CTAB) to the reaction afforded dramatic rate accelerations as well as good‐to‐excellent yield of the products ranging from 70% to 90%. Reactions underwent regioselective monobromination at 1‐position of 2‐alkoxynaphthalene. The rate of bromination has been followed conductometrically. The reaction kinetics indicated first‐order kinetics in [2‐ANP] as well as in [TMBATB]. Kinetic results in the presence of CTAB were explained on the basis of the Raghavan–Srinivasan model as applied to micelle‐mediated bimolecular reactions.     

二甲氨基乙氧基氧杂硼烷对环氧树脂的潜伏固化活性

以3种含分子内N→B配位键的环状结构的二甲氨基乙氧基氧杂硼烷:β,β'-二甲氨基乙氧基-4,4,5,5-四甲基-1,3,2-二氧杂戊硼烷(PDB)、β,β'-二甲氨基乙氧基-5,5-二甲基-1,3,2-二氧杂己硼烷(NDB)和β,β'-二甲氨基乙氧基-1,3,2-苯并二氧硼烷(CDB)为研究对象,采用敞口观察法测定其水解稳定性,通过差示扫描量热法(DSC)、烘箱固化实验、恒温潜伏性实验及红外光谱(FTIR)分析,研究3种氧杂硼烷对环氧树脂的固化活性和潜伏性能,采用Ozawa-Avrami法估算固化反应的表观活化能(E a).结果表明,苯环π电子共轭效应、烷氧基给电子效应以及氧杂硼烷空间结构差异等因素影响了3种二甲氨基乙氧基氧杂硼烷上硼原子电子云密度及N→B配位络合强度,导致其水解稳定性及对环氧树脂的固化活性顺序为NDBPDBCDB,潜伏性能则正好相反.E51与PDB组成的单组分环氧树脂在常温放置3个月后,环氧基的转化率为0.22.