环糊精衍生物气相色谱手性毛细管柱的制备与考察

合成了３种新的含长烷基链的β－环糊精衍生物手性固定相。实验表明，随着烷基链长的增加，对手性卤代烃和酯的立体选择性有所提高；以ＯＶ－７为手性固定相的稀释剂对多数手性化合物的拆分效果好于ＯＶ－１７０１。２，６－Ｏ－二辛基－３－Ｏ三氟乙酰－β－环糊精／ＯＶ－７柱应用于不对称合成及催化中对映体的分离与测定和白酒中乳酸乙酯对映体含量的测定。     

焓-熵补偿在芳香化合物位置异构体保留机理研究中的应用

系统地研究了二氯苯等６种芳香化合物在ＰＳＯ－１１－１８Ｃ６等９支冠醚聚硅氧烷和ＯＶ－１７０１,Ｃａｒｂｏｗａｘ－２０Ｍ毛细管色谱柱上分离过程的热力学参数。利用超热力学方法,考察了这些芳香化合物及其异构体在各种色谱柱上分离过程的焓－熵补偿现象。论述了各种冠醚固定液对芳香化合物的保留机理以及取代基在苯环上位置的变化对溶质与冠醚固定液之间的相互作用参数的影响。     

几种环糊精衍生物手性固定相与OV－1701或OV－7混和离析氨基酸、羟基酸等对映体

本实验合成了２，６－０－二丁基－３－０－三氟乙酰基－γ－环糊精、２，６－０－二戊基－３－０－三氟乙酰基－β－环糊精、全戊基－β－ＣＤ。分离了一些氨基酸酯、羟基酸酯、卤代酸酯、卤代烃、醇等对映体。比较了ＯＶ－７和ＯＶ－１７０１作混合固定相稀释液对离析性能的影响。     

几种环糊精衍生物手性固定相与OV—1701或OV—7混和离析氨基酸,羟基酸…

本实验合成了２，６－０－二丁基－３－０－三氟乙酰基－γ－环糊精，２，６－０二戊基－３－０三氟乙酰基基－β－环糊精，全戊基－β－ＣＤ。分离了一些氨基酸酯，羟基酸酯，卤代酸酯，卤代烃，醇等对映体。比较了ＯＶ－７和ＯＶ－１７０１作混合固定相稀释液对离析性能的影响。     

不同稀释剂对改性环糊精手性分离的影响

用α－苯乙胺、反式－二氯菊酸甲酯做手性试剂,考察了５种稀释剂稀释２,６－二－Ｏ－Ｔ基－３－Ｏ＝丁酰基－β－环糊精的对映体拆分效果。结果表明,用ＳＰ－７９做知释剂与ＯＶ－７、ＯＶ－１７０１、ＳＥ－５４、ＰＥＧ－２０Ｍ等相比,前者有基本相同的柱效、略高或基本一致的对映体选择性。通过焓熵关系分析发现,选用所述不同稀释剂不改变手性拆分机制。     

脂肪醇在OV-1和Superox 0.6柱上的色谱行为

Ｓｕｐｅｒｏｘ系列固定相是性能优良的氢键型固定相，适用地脂肪醇分析，非级性固定相ＯＶ－１柱，经减活处理后亦适宜醇类异构体分离，考察了Ｃ１－Ｃ２异构醇的３６个组分在分离效能。ＯＶ－１柱和Ｓｕｐｅｒｏｘ０．６柱上的保留行为，柱效和极限温度，结果表明，两种柱对醇都有很好的分离效能。ＯＶ－１柱柱效及柱温极限高，除了戊醇－３和戊醇－２是重叠峰外，其余组分间有一定分离度，其分离顺序基本上是根据组分的沸点，包括     

气相色谱法研究氯丙酮的酮式和烯醇式的互变异构

固定液ＯＶ－１７涂渍在１０２硅烷化载体上作为固定相制成的填充柱能分离出氯丙酮的酮式和烯醇式的互变异构体，用ＦＩＤ作检测器，测定了不同柱温下这两种异构体的相对含量。     

红豆杉提取液中紫杉醇的HPLC法测定

建立了高效液相色谱法（ＨＰＬＣ）测定云南红豆杉原始提取液中紫杉醇含量的方法，经比较Ｃ１８和氰基固定相，发现在氰基柱上，以ＭｅＯＨ－ＭｅＣＮ－Ｈ２Ｏ（２０：１６：６４体积分数）为流动相时，紫杉醇获得更满意的分离、流速２．０ｍＬ／ｍｉｎ，柱温４０℃，ＵＶ检测波长：２２７ｎｍ，方法简便、准确、适合于微量紫杉醇的测定。     

交联XE－60和PEG－20M极性固定相非晶硅膜改性弹性玻璃毛细管柱研究

研究了交联ＸＥ－６０和ＰＥＧ－２０Ｍ极性固定相非晶硅膜改性弹性玻璃毛细管柱，在适当的温度下，用过氧化二异丙苯（ＤＣＵＰ）游离基引发交联，成功地制备了ＸＥ－６０和ＰＥＧ－２０Ｍ极性柱，它们均具有柱效高、惰性好、化学稳定性好和耐溶剂、抗腐蚀、耐高温等性能，是一种新型的极性交联柱。     

PVC／PE交联共混体系的动态力学研究

在ＰＶＣ／ＰＥ共混体系中加入交联剂和引发剂能产生ＰＶＣ－ＣＯ－ＰＥ共聚物，这种共聚物在共混物中可起到增容剂的作用。通过动态力学分析和扫描电镜研究了ＰＶＣ／ＰＥ交联共混体系的相容性。发现引发剂、交联剂、稳定剂和增塑剂等对共混物中的交联反应均有较大的影响。     

Permeability, porosity, and structure of monolithic capillary columns in gas chromatography

The permeability of monolithic silica gel capillary columns with respect to the helium carrier gas was studied using gas chromatography. The results obtained by gas chromatography and liquid chromatography were found to be in close agreement. The permeability of monolithic capillary columns was compared to that of hollow capillary columns and columns packed with finely dispersed sorbents. It was demonstrated that the permeability of the monolithic capillary columns studied is almost three orders of magnitude lower than that of hollow capillary columns of the same diameter but two orders of magnitude higher than that of columns packed with micron-scale particles. The interstitial fraction of the monolithic columns was found to be very high, 0.95.     

Life-time studies with capillary electrochromatography columns operated under different conditions

A test system has been established to permit the monitoring of the life-time performance of several reversed- phase capillary electrochromatography (CEC) columns. The retention factors, k(cec), peak symmetry coefficients, lambda(sym), and column efficiencies, N, of three neutral n-alkylbenzene analytes, namely ethyl-, n-butyl- and n-pentylbenzenes, were determined for Hypersil 3 microm n-octylsilica and n-octadecylsilica packed into CEC capillary columns of 100 microm I.D., with a packed length of 250 mm, and a total length of 335 mm. The performances of these CEC capillary columns were examined for a variety of eluents with pH values ranging between pH 2.0 - 8.0, similar to those employed to study the retention behaviour of peptides that we have previously reported. The relative standard deviation (RSD) of the retention factors (k(cec) values) of these n-alkylbenzenes, acquired with an eluent of (25 mM Tris-HCl, pH 8.0,)-acetonitrile (1:4, v/v), when the CEC capillary columns were used for the first time (virgin values), were 4% (based on data acquired with 4 CEC capillary columns) for the n-octyl bonded silica capillary columns, and 6% (based on 8 columns) for n-octadecyl bonded silica capillary columns. The RSD values of the k(cec) values of the n-alkylbenzenes for one set of replicates (n=6) with one CEC capillary column was < 0.5%. The theoretical plate numbers, N, for the virgin CEC capillary columns were ca. 60,000, whilst the observed N values for all new CEC capillary columns were > or = 40,000 for n-octyl bonded silica capillary columns and > or = 50,000 for n-octadecyl bonded silica capillary columns. The peak symmetry coefficients, lambda(sym), of the n-alkylbenzenes for virgin CEC capillary columns and for CEC capillary columns used for more than 1,000 injections were always in the range 0.95-1.05. The experimental results clearly document that the life-time performance of the CEC capillary columns depends on the eluent composition, as well as the nature of the analytes to which the CEC capillary columns are exposed.     

Comparison of the efficiency of microparticulate and monolithic capillary columns

A comparison is made between the efficiency of microparticulate capillary columns and silica and polymer-based monolithic capillary columns in the pressure-driven (high-performance liquid chromatography) and electro-driven (capillary electrochromatography) modes. With packed capillary columns similar plate heights are possible as with conventional packed columns. However, a large variation is observed in the plate heights for individual columns. This can only be explained by differences in the quality of the packed bed. The minimum plate height obtained with silica monolithic capillary columns in the HPLC mode is approximately 10 microm, which is comparable to that of columns packed with 5-microm particles. The permeability of wide-pore silica monoliths was found to be much higher than that of comparable microparticulate columns, which leads to much lower pressure drops for the same eluent at the same linear mobile phase velocity. For polymer-based monolithic columns (acrylamide, styrene/divinyl benzene, methacrylate, acrylate) high efficiencies have been found in the CEC mode with minimum plate heights between 2 and 10 microm. However, in the HPLC mode minimum plate heights in the range of 10 to 25 microm have been reported.     

High-performance liquid chromatographic enantioseparations on capillary columns containing crosslinked polysaccharide phenylcarbamate derivatives attached to monolithic silica

Monolithic capillary columns containing native silica gel were covalently modified with 3,5-disubstituted phenylcarbamate derivatives of cellulose and amylose and applied for enantioseparations in capillary LC. The method previously used for covalent immobilization of polysaccharide phenylcarbamate derivatives onto the surface of microparticulate silica gel was successfully adapted for in situ modification of monolithic fused-silica capillary columns. The effects of the nature of polysaccharide and the substituents, as well as of multiple covalent immobilization of polysaccharide derivative on chromatographic performance of capillary columns were studied. The capillary columns obtained using this technique are stable in all solvents commonly used in LC and exhibit promising enantiomer resolving ability.     

一种多通道匀浆装填毛细管色谱柱的新装置及应用

针对目前毛细管色谱柱装柱效率低、不同批次装填的毛细管色谱柱之间性能差异大的问题,我们发展了一种多通道匀浆装填毛细管色谱柱的新装置。该装置以液相色谱泵提供压力、采用磁力搅拌保持匀浆液均匀分散,一次可装填多达6根毛细管色谱柱。以牛血清白蛋白(BSA)的胰蛋白酶酶切肽段混合物为样本,选择峰容量、蛋白覆盖率、3个特定离子的保留时间以及毛细管色谱柱柱压为指标,在毛细管液相色谱-质谱联用系统上对装填的反相毛细管色谱柱的性能进行了评价。分别考察了一次装填的6根毛细管色谱柱、两次装填的12根毛细管色谱柱以及一次装填1根与一次装填6根毛细管色谱柱的性能及稳定性。实验结果表明:同一批次装填的6根毛细管色谱柱的性能相近;不同批次装填的12根毛细管色谱柱的峰容量和覆盖率没有明显的区别,但保留时间和毛细管色谱柱柱压的稳定性较差;一次装填1根和一次装填6根毛细管色谱柱柱性能的稳定性与两次分别装填6根毛细管色谱柱的稳定性相近,即采用本装置可显著提高毛细管色谱柱的装填效率且每次装填毛细管色谱柱的数量不会对柱性能产生影响。     

Polymetacrylate and hybrid interparticle monolithic columns for fast separations of proteins by capillary liquid chromatography

Preparation of organic polymer monolithic columns in fused silica capillaries was aimed at fast gradient separation of proteins. For this purpose, polymerization in situ procedure was optimized, using ethylene dimetacrylate and butyl metacrylate monomers with azobisisobutyronitrile as initiator of the polymerization reaction in presence of non-aqueous porogen solvent mixtures composed of 1-propanol and 1,4-butanediol. The separation of proteins in totally monolithic capillary columns was compared with the chromatography on a new type of "hybrid interparticle monolithic" capillary columns, prepared by in situ polymerization in capillary packed with superficially porous spherical beds, 37-50 microm. The "hybrid" columns showed excellent stability and improved hydrodynamic flow properties with respect to the "totally" monolithic capillary columns. The separation selectivity is similar in the two types of columns. The nature of the superficially porous layer (bare silica or bonded C18 ligands) affects the separation selectivity less significantly than the porosity (density) of the monolithic moiety in the interparticle space, controlled by the composition of the polymerization mixture. The retention behaviour of proteins on all prepared columns is consistent with the reversed-phase gradient elution theory.     

Comparison of monolithic silica and polymethacrylate capillary columns for LC

Organic polymer monolithic capillary columns were prepared in fused-silica capillaries by radical co-polymerization of ethylene dimethacrylate and butyl methacrylate monomers with azobisisobutyronitrile as initiator of the polymerization reaction in the presence of various amounts of porogenic solvent mixtures and different concentration ratios of monomers and 1-propanol, 1,4-butanediol, and water. The chromatographic properties of the organic polymer monolithic columns were compared with those of commercial silica-based particulate and monolithic capillary and analytical HPLC columns. The tests included the determination of H-u curves, column permeabilities, pore distribution by inversed-SEC measurements, methylene and polar selectivities, and polar interactions with naphthalenesulphonic acid test samples. Organic polymer monolithic capillary columns show similar retention behaviour to chemically bonded alkyl silica columns for compounds with different polarities characterized by interaction indices, Ix, but have lower methylene selectivities and do not show polar interactions with sulphonic acids. The commercial capillary and analytical silica gel-based monolithic columns showed similar selectivities and provided symmetrical peaks, indicating no significant surface heterogeneities. To allow accurate characterization of the properties of capillary monolithic columns, the experimental data should be corrected for extra-column contributions. With 0.3 mm ID capillary columns, corrections for extra-column volume contributions are sufficient, but to obtain true information on the efficiency of 0.1 mm ID capillary columns, the experimental bandwidths should be corrected for extra-column contributions to peak broadening.     

Packing capilllary electrochromatography columns using vacuum--a preliminary study

This paper introducesa novel method for packing Capillary Electrochromatography Columns (CEC). Using vacuum packing methodology, silica particles as small as 1 microm were successfully packed into the capillary columns with 75 microm inner diameter. The columns are verystable and show no noticeable loss in efficiency after 200 sample injections. The performance of these vacuum packed capillary columns was evaluated with a mixture of aromatic and non-aromatic compounds. A 24 cm long capillary column can produce peak efficiencies of around 45,000 plates for benzene.     

Influence of the diameter of monolithic capillary columns on their gas chromatography characteristics

Divinylbenzene polymer monolithic capillary columns were prepared on the basis of capillaries 0.01 to 0.53 mm in diameter. Separation properties of the columns were investigated with the use of a test mixture of light hydrocarbons. The permeability and C parameter in the Van Deemter equation were determined for all the columns. For the most part, the columns had similar characteristics: permeability was in the range (2.2 ± 0.2) × 10^?9 cm², with parameter C in the range (0.7 ± 0.2) × 10^?3 s (with n-butane as a sorbate). It was thus established that capillary diameter has only a slight effect on the efficiency of monolithic capillary columns (unlike packed capillary columns and microcolumns, whose properties, according to the literature data, depend strongly on the column diameter). The difference in properties between the narrowest monolithic column (capillary diameter 0.01 mm) and the others is explained by column overloading.     

Capillary monolithic titania column for miniaturized liquid chromatography and extraction of organo-phosphorous compounds

A new sol?Cgel protocol was designed and optimized to produce titanium-dioxide-based columns within confined geometries such as monolithic capillary columns and porous-layer open-tubular columns. A surface pre-treatment of the capillary enabled an efficient anchorage of the monolith to the silica capillary wall during the synthesis. The monolith was further synthesized from a solution containing titanium n-propoxide, hydrochloric acid, N-methylformamide, water, and poly(ethylene oxide) as pore template. The chromatographic application of capillary titania-based columns was demonstrated with the separation of a set of phosphorylated nucleotides as probe molecules using aqueous normal-phase liquid chromatography conditions. Capillary titania monoliths offered a compromise between the high permeability and the important loading capacity needed to potentially achieve miniaturized sample preparations. The specificity of the miniaturized titania monolithic support is illustrated with the specific enrichment of 5??-adenosine mono-phosphate. The monolithic column offered a ten times higher loading capacity of 5??-adenosine mono-phosphate compared with that of the capillary titania porous-layer open-tubular geometry.