Thermodynamic properties of some ionic liquids using a simple equation of state

In this work, we have used a simple equation of state (EoS) to predict the density and other thermodynamic properties such as isobaric expansion coefficient, α_P , isothermal compressibility, κ_T, and internal pressure, P_i, for nine ionic liquids including trihexyl (tetradecyl) phosphonium chloride ([(C₆H₁₃)₃P(C₁₄H₂₉)][Cl]), trihexyl (tetradecyl) phosphonium acetate ([(C₆H₁₃)₃P(C₁₄H₂₉)][Ac]), trihexyl (tetradecyl) phosphonium bis {(trifluoromethyl) sulfonyl} amide ([(C₆H₁₃)₃P(C₁₄H₂₉)][NTf₂]), 1-butyl-3-methylimidazolium bis {(trifluoromethyl) sulfonyl} amide ([bmim][NTf₂]), 1-hexyl-3-methylimidazolium bis {(trifluoromethyl) sulfonyl} amide ([hmim][NTf₂]), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), 1-butyl-3-octylimidazolium tetrafluoroborate ([omim][BF₄]), 1-butyl-3-octylimidazolium hexafluorophosphate ([omim][PF₆]), and 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) at different temperatures and pressures. A wide comparison with experimental and literature data has been made. The results show that this EoS can be used to reproduce and predict different thermodynamic properties of ionic liquids within experimental errors.     

The electrochemistry of arylated anthraquinones in room temperature ionic liquids

Arylated anthraquinone derivatives of different sizes and different π‐basicities have been prepared, and the electrochemical behaviour of these substances has been studied on screen printed graphite electrodes in the three room temperature ionic liquids (RTILs), 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄MIM][PF₆]), 1‐hexyl‐3‐methylimidazolium hexafluorophosphate ([C₆MIM][PF₆]) and 1‐octyl‐3‐methylimidazolium hexafluorophosphate ([C₈MIM][PF₆]). Half redox potentials for the first and second one electron reduction waves were identified, and the diffusion coefficient values were estimated from cyclic voltammetry measurements. The influence of the nature of the RTIL and of the substitution pattern of the anthraquinone on the solvodynamic radii were studied. A correlation of the reductive potentials with the corresponding Hammett constants of the substituents was tested. Copyright © 2013 John Wiley & Sons, Ltd.     

Switching of hydrogen bonds of water in ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate

We have investigated temperature‐induced Raman spectral changes of deuterated water in an ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim][BF₄]), between room temperature and 77 K. The comparison of the OH and OD stretching vibrational spectra at 77 K shows that the strength of the hydrogen bonds in [bmim][BF₄]–water mixtures strongly depends on the type of water, i.e. H₂O and D₂O. In the [bmim][BF₄]–D₂O system, remarkably strong hydrogen bonds form at low temperatures, but they switch to nearly free hydrogen bonds on heating. Copyright © 2013 John Wiley & Sons, Ltd.     

Templated electrodeposition of silver nanowires in a nanoporous polycarbonate membrane from a nonaqueous ionic liquid electrolyte

Template electrodeposition has been used to prepare a wide range of nanostructures but has generally been restricted to aqueous electrolytes. We report the deposition of silver nanowires in a commercial nuclear track-etched polycarbonate template from the nonaqueous ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) using silver electrochemically dissolved from the anode. Transmission electron microscopy (TEM) shows that the nanowires have a very high aspect ratio with an average diameter of 80 nm and length of 5 μm. Ionic liquid electrolytes should greatly extend the range of metals that can be electrodeposited as nanowires using templates. PACS 81.15.Pq; 81.07.-b     

Measuring the solubility of benzoic acid in room temperature ionic liquids using chronoamperometric techniques

The electrochemical reduction of benzoic acid (BZA) has been studied at platinum micro‐electrodes (10 and 2 µm diameters) in acetonitrile (MeCN) and six room temperature ionic liquids (RTILs): [C₂mim][NTf₂], [C₄mim][NTf₂], [C₄mpyrr][NTf₂], [C₄mim][BF₄], [C₄mim][NO₃] and [C₄mim][PF₆] (where [C_nmim]⁺ = 1‐alkyl‐3‐methylimidazolium, [NTf₂]^? = bis(trifluoromethylsulphonyl)imide, [C₄mpyrr]⁺ = N‐butyl‐N‐methylpyrrolidinium, [BF₄]^? = tetrafluoroborate, [NO₃]^? = nitrate and [PF₆]^? = hexafluorophosphate). Based on the theoretical fitting to experimental chronoamperometric transients in [C₄mpyrr][NTf₂] and MeCN at several concentrations and on different size electrodes, it is suggested that a fast chemical step preceeds the electron transfer step in a CE mechanism (given below) in both RTILs and MeCN, leading to the appearance of a simple one‐electron transfer mechanism. The six RTIL solvents and MeCN were saturated with BZA, and potential‐step chronoamperometry revealed diffusion coefficients of 170, 4.6, 3.2, 2.7, 1.8, 0.26 and 0.96 × 10^?11 m² s^?1 and solubilities of 850, 75, 78, 74, 220, 2850 and 48 mM in MeCN and the six ionic liquids, respectively, at 298 K. The high solubility of BZA in [C₄mim][NO₃] may suggest a strong interaction of the dissolved proton with the nitrate anion. Although there are relatively few literature reports of solubilities of organic solutes in RTILs at present, these results suggest the need for further studies on the solubilities of organic species (particularly acids) in RTILs, because of the contrasting interaction of dissolved species with the RTIL ions. Chronoamperometry is suggested as a convenient methodology for this purpose. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis,COSMO-RS analysis and optical properties of surface modified ZnS quantum dots using ionic liquids

Zinc sulfide (ZnS) quantum dots (QDs) were synthesized using the microwave assisted ionic liquid (MAIL) route. Three ionic liquids (ILs), namely, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF₄]), trihexyl(tetradecyl) phosphonium bis(trifluoromethanesulfonyl) amide ([P_6,6,6,14][TSFA]) and trihexyl(tetradecyl) phosphonium chloride ([P_6,6,6,14][Cl]) were used in this study. The size and structure of the QDs were characterized by high-resolution transmission electron microscopy (HR-TEM) and selected area electron diffraction (SAED) pattern, respectively. The synthesized QDs were of wurtzite crystalline structure with size less than 5 nm. The QDs were more uniformly distributed while using the phosponium based ILs as a reaction medium during synthesis. The optical properties were investigated by UV–vis absorption and photoluminescence (PL) emission spectroscopy. The optical properties of QDs showed the quantum confinement effect in their absorption and the effect of cation and anion structural moiety was observed on their bandedge emission. The QDs emission intensity was measured higher for [P_6,6,6,14][Cl] due to their better dispersion as well as high charge density of Cl anion. The capability of the ILs in stabilizing the QDs was interpreted by density functional theory (DFT) computations. The obtained results are in good agreement with the theoretical prediction.     

Novel room temperature ionic liquid for fluorescence enhancement of Eu and Tb

The newly prepared ionic liquid, 1-butyl-3-methylimidazolium benzoate, ([bmim][BA]), was found to enhance the fluorescence of Eu³⁺ and Tb³⁺. The fluorescence enhancement resulted from a sensitization of the lanthanide fluorescence by the benzoate anion of the ionic liquid, [bmim][BA], and a reduction in the non-radiative channels in the non-aqueous environment provided by the ionic liquid. However, the fluorescence enhancement of the lanthanides in the ionic liquid was limited due to the operation of the inner filter effect, which resulted from the strong absorption of the benzoate. The inner filter effect was minimized by observing the Eu³⁺ fluorescence using a front face geometry and also by diluting the lanthanide-[bmim][BA] system, using another ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf₂N]), as a solvent. In the case of Tb³⁺, the emission from the lanthanide was masked by the strong emission from the ionic liquid in the region 450-580 nm. The long lived Tb³⁺ emission was therefore observed using delayed gated detection, where an appropriate delay was used to discriminate against the short lived emission from the ionic liquid. The large fluorescence enhancement due to ligand sensitized fluorescence observed with [bmim][BA] diluted in [bmim][Tf₂N], leads to nanomolar detection of the lanthanides. This is, to the best of our knowledge, the first report of an ionic liquid being employed for ligand sensitized fluorescence enhancement of lanthanides.     

Effects of Ionic Liquids on Fluorescence Characteristics of 17α- and 17β-estradiol

Herein, we report the effects of six different room temperature ionic liquids (RTILs) on fluorescence spectra of 17α-estradiol (EE1) and 17β-estradiol (E2). The selected RTILs belonged to the compound classes of 1-alkyl-3-methylimidazolium tetrafluoroborate ([C_nMIM]BF₄) and 1-alkyl-3-methyl imidazolium hexafluorophosphate ([C_nMIM]PF₆). RTILs had a gradual quenching effect on fluorescence intensity (FI) of EE1 and E2, and the quenching process followed the well-known Stern-Volmer theory. The quenching mechanism of EE1 and E2 by RTILs was demonstrated to be dynamic quenching. Additionally, the overall quenching efficiency by [C_nMIM]BF₄ was higher than [C_nMIM]PF₆. The increased carbon chain length of RTILs did not lead to obvious differences in FI for EE1 and E2. The quenching efficiency showed irregular trend at three different temperatures (25, 35 and 45 °C). RTILs such as [C₄MIM]PF₆ had the different fluorescent effects on organic chemicals with different fluorophores. The enhancing effects of [C₄MIM]PF₆ were observed on strong fluorescence chemicals (dansyl chloride, rhrodamine B, 1,10-phenanthroline, norfloxacin), while quenching effect on weak fluorescence chemicals (EE1 and E2). In theory, these results provide a theoretical foundation for deep insight into their interaction mechanism between RTILs and estradiol.     

A piperidinium-based ester-functionalized ionic liquid as electrolytes in Li/LiFePO<Subscript>4</Subscript> batteries

A new functionalized ionic liquid (IL) based on cyclic quaternary ammonium cations with ester group and bis(trifluoromethanesulfonyl)imide ([TFSI]^?) anion, namely, N-methyl-N-methoxycarbonylpiperidinium bis(trifluoromethanesulfonyl)imide ([MMOCPip][TFSI]), was synthesized and characterized. Physical and electrochemical properties, including Li-ion transference number, ionic conductivity, and electrochemical stability, were investigated. The electrochemical window of [MMOCPip][TFSI] was 6 V, which was wide enough to be used as a common electrolyte material. The Li-ion transference number of this IL electrolyte containing 0.1 M LiTFSI was 0.56. The half-cell tests indicated that the [MMOCPip][TFSI] obviously improved the cyclability of a Li/LiFePO₄ cell. For the Li/LiFePO₄ half-cells, after 20 cycles at room temperature at 0.1 C, the discharge capacity was 109.7 mAh g^?1 with 98.7% capacity retention in the [MMOCPip][TFSI]/0.1 M LiTFSI electrolyte. The good electrochemical performance demonstrated that the [MMOCPip][TFSI] could be used as electrolyte for lithium-ion batteries.     

Solvation of AgTFSI in 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquid investigated by vibrational spectroscopy and DFT calculations

In this paper we investigate the solvation of silver bis(trifluoromethylsulfonyl)imide salt (AgTFSI) in 1‐ethyl‐3‐methylimidazolium TFSI [EMI][TFSI] ionic liquid by combining Raman and infrared (IR) spectroscopies with density functional theory (DFT) calculations. The IR and Raman spectra were measured in the 200–4000 cm⁻¹ spectral region for AgTFSI/[EMI][TFSI] solutions with different concentrations ([AgTFSI] <0.2 mole fraction). The analysis of the spectra shows that the spectral features observed by dissolution of AgTFSI in [EMI][TFSI] solution originate from interactions between the Ag⁺ cation and the first neighboring TFSI anions to form relatively stable Ag complexes. The ‘gas phase’ interaction energy of a type [Ag(TFSI)₃]²⁻ complex was evaluated by DFT calculations and compared with other interionic interaction energy contributions. The predicted spectral signatures because of the [Ag(TFSI)₃]²⁻ complex were assessed in order to interpret the main IR and Raman spectral features observed. The formation of such complexes leads to the appearance of new interaction‐induced bands situated at 753 cm⁻¹ in Raman and at 1015 and 1371 cm⁻¹ in IR, respectively. These specific spectral signatures are associated with the ‘breathing’ mode and the S–N–S and S–O stretching modes of the TFSI anions engaged in the complex. Finally, all these findings are discussed in terms of interaction mechanisms enabling the electrodeposition characteristics of silver from AgTFSI/[EMI][TFSI] IL‐based electrolytic solutions. Copyright © 2015 John Wiley & Sons, Ltd.     

Research for improvement on the extract efficiency of lignans in traditional Chinese medicines by hybrid ionic liquids: As a case of Suhuang antitussive capsule

Recently, efficient extraction of natural products from traditional Chinese medicines (TCMs) by green solvents is deemed an essential area of green technology and attracts extensive attentions. In this work, a green protocol for simultaneous ultrasonic-extraction of the native compounds with different polarities of TCMs by using a hybrid ionic liquids (HILs)-water system was reported for the first time. As a case study, three superior ILs (1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]), 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]), and 1-allyl-3-methylimidazolium chloride ([AMIM]Cl)) were chosen as the compositions of the HILs system, and the TCMs Suhuang antitussive capsule (SH) containing different-polarity lignans was selected. Primarily, an ultra-performance liquid chromatography coupled to triple quadrupole tandem mass spectrometry (UPLC-QqQ-MS/MS) method in the multiple reaction monitoring (MRM) mode was established for qualitative and quantitative analysis of 18 lignans. After majorization by uniform design experiment, the HILs prepared with [AMIM]Cl, [EMIM][BF4], and [EMIM][OAc] at a volume ratio of 1:5:5 could simultaneously extract multi-polarity lignans compared to single IL. Subsequently, the conditions of ultrasonic extraction employing with HILs and traditional organic solvent were optimized by the response surface methodology, respectively. The results indicated that the extract efficiency of the HILs system for target compounds was significantly improved compared with the traditional organic solvent-extraction, i.e. the content of total lignans in ethanol system was up to 47 mg/g, while that in the HILs system was up to 69 mg/g, with an increasing of 47%. Additionally, ¹H-NMR and ¹³C-NMR spectra were used to characterize the hydrogen-bond interactions in the HILs-lignan mixtures. Extraction with the HILs in TCMs is a new application schema of ILs, which not only avoids the use of volatile toxic organic solvents, but also shows the potential to be comprehensively applied for the extraction of bioactive compounds from TCMs.     

A piperidinium-based ionic liquid electrolyte to enhance the electrochemical properties of LiFePO<Subscript>4</Subscript> battery

A piperidinium-based ionic liquid, N-methylpiperidinium-N-acetate bis(trifluoromethylsulfonyl)imide ([MMEPip][TFSI]), was synthesized and used as an additive to the electrolyte of LiFePO₄ battery. The electrochemical performance of the electrolytes based on different contents of [MMEPip][TFSI] has been investigated. It was found that the [MMEPip][TFSI] significantly improved the high-rate performance and cyclability of the LiFePO₄ cells. In the optimized electrolyte with 3 wt% [MMEPip][TFSI], 70 % capacity can be retained with an increase in rate to 3.5 C, which was 8 % higher than that of electrolyte without [MMEPip][TFSI]. For the Li/LiFePO₄ half-cells, after 100 cycles at 0.1 C, the discharge capacity retention was 78 % in the electrolyte without ionic liquid. However, in the electrolyte with 3 wt% [MMEPip][TFSI], it displayed a high capacity retention of 91 %. The good electrochemical performances indicated that the [MMEPip][TFSI] additive would positively enhance the electrochemical performance of LiFePO₄ battery.     

Sonoluminescence quenching and cavitation bubble temperature measurements in an ionic liquid

A comparison between the temperatures within imploding acoustic cavitation bubbles and the extent of sonoluminescence (SL) quenching by C₁–C₅ aliphatic alcohols in 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM][EtSO₄], a well known imidazolium based room temperature ionic liquid (RTIL)), has been made at an ultrasound frequency of 213 kHz. The temperatures obtained ranged from 3500 ± 200 K, in neat [EMIM][EtSO₄], to about 3200 ± 200 K in RTIL-alcohol containing solutions. It was also found that the SL intensity decreased with increasing concentration (up to 1 M) of the alcohols to a greater extent compared with the relative changes to the bubble temperatures. Both the extent of the reduction in the bubble temperatures and the SL quenching were much smaller than those obtained in comparable aqueous solutions containing aliphatic alcohols. Possible reasons for the differences in the observed trends between water/alcohol and [EMIM][EtSO₄]/alcohol systems under sonication at 213 kHz are discussed.     

Binary composite ionic liquids [bmim][BF4] and [bmim][Ac] for electrochemical reduction of nitrobenzene

The binary composite ionic liquid mixtures composed of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) and 1-butyl-3-methylimidazolium acetate ([bmim][Ac]) were studied and used in electroreduction of nitrobenzene for the first time. ¹H NMR and Fourier transform infrared (FTIR) spectroscopy were carried out to acquire a deep understanding of the interaction of binary ionic liquids, and UV/Vis spectroscopy was used to study the interaction between the mixture of ionic liquids and nitrobenzene. It was found that chemical shifts of all protons were changed and significant changes in the anion IR bands were induced, and the UV maximum absorption wavelength and absorbance of nitrobenzene in binary ionic liquids were different from those in the neat ionic liquid. The electrochemical reduction behavior of nitrobenzene in binary composite ionic liquids on platinum electrode was studied by cyclic voltammetry, in situ Fourier transform infrared spectroscopy, and constant potential electrolysis. Results indicated that the reduction of nitrobenzene in binary composite ionic liquids demonstrated higher current densities with a more positive potential, and the product (azobenzene) showed higher yield and selectivity in the composite ionic liquids than in the neat ionic liquids; the concentrations of water in the binary mixtures of ionic liquids had great effect on the electrochemical behavior of nitrobenzene. In the end, the mechanism of reduction of nitrobenzene in binary mixtures of ionic liquids was discussed.     

离子液体存在下铜的电沉积及其表面增强拉曼散射效应研究

离子液体作为一种绿色介质,在电化学领域中的研究正在兴起,引起了研究者的浓厚兴趣。文章运用循环伏安法研究了离子液体(1-丁基-3-甲基咪唑四氟硼酸盐,[bmim]BF4)存在时,酸性硫酸铜溶液中铜在铜电极上的电化学沉积行为。研究表明,[bmim]BF4的加入使铜的沉积峰电位负移,沉积电流增加。采用扫描电镜(SEM)和X射线衍射(XRD)对铜镀层的形貌及结构进行表征,结果显示离子液体的存在可使铜镀层的层状晶粒尺寸减小,镀层出现(220)高择优取向。以甲基橙(MO)为探针分子,研究了所得铜镀层的表面增强拉曼散射(SERS)效应,发现离子液体存在下得到的铜镀层是较好的SERS基底,具有良好的增强效果及稳定性。对MO分子的增强因子可达4.7×105,而且保存了60天后,其检测灵敏度没有显著的降低。     

Behavior of Short Nitroxide Biradical in Room Temperature Ionic Liquids

The intramolecular electron spin exchange in short nitroxide biradical O=S(OR₆)₂ (I), where OR₆ is 1-oxyl-2,2,6,6-tetramethyl-4-oxypiperidine, dissolved in the room temperature ionic liquids (RTILs) 1-octyl-3-methylimidazolium hexafluorophosphate (omimPF₆), 1-octyl-3-methylimidazolium tetrafluoroborate (omimBF₄), 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF₄), and 1-ethyl-3-methylimidazolium tetrafluoroborate (emimBF₄) has been studied by electron paramagnetic resonance (EPR) spectroscopy as a function of temperature. Temperature variations of the isotropic nitrogen hyperfine splitting constant a were measured from EPR spectra. Thermodynamic parameters of the conformational rearrangements were calculated and compared with literature data. These intramolecular movements in rather rigid short-chain biradical I dissolved in four different RTILs are described well by the Debye–Stokes–Einstein law. Unrestricted density-functional-theory calculations of the geometry and electronic structure of the biradical were carried out using the ORCA program package, and showed that the O=S< group is available for the interaction with anions and cations of RTIL. The possible mechanism of such conformational transitions in biradical I in RTIL is discussed.     

Acoustic cavitation in 1-butyl-3-methylimidazolium bis(triflluoromethyl-sulfonyl)imide based ionic liquid

In this work, a comparison between the temperatures/pressures within acoustic cavitation bubble in an imidazolium-based room-temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium bis(triflluoromethyl-sulfonyl)imide ([BMIM][NTf₂]), and in water has been made for a wide range of cavitation parameters including frequency (140–1000 kHz), acoustic intensity (0.5–1 W cm⁻²), liquid temperature (20–50 °C) and external static pressure (0.7–1.5 atm). The used cavitation model takes into account the liquid compressibility as well as the surface tension and the viscosity of the medium. It was found that the bubble temperatures and pressures were always much higher in the ionic liquid compared to those predicted in water. The valuable effect of [BMIM][NTf₂] on the bubble temperature was more pronounced at higher acoustic intensity and liquid temperature and lower frequency and external static pressure. However, confrontation between the predicted and the experimental estimated temperatures in ionic liquids showed an opposite trend as the temperatures measured in some pure ionic liquids are of the same order as those observed in water. The injection of liquid droplets into cavitation bubbles, the pyrolysis of ionic liquids at the bubble-solution interface as well as the lower number of collapsing bubbles in the ionic liquid may be the responsible for the lower measured bubble temperatures in ionic liquids, as compared with water.     

Electrospinning of polyacrylonitrile fibers from ionic liquid solution

We developed a temperature-controlled electrospinning apparatus specially for the polymers/IL system with high viscosity and surface tension and investigated the electrospinning of polyacrylonitrile (PAN)/1-butyl-3-methyl-imidazolium bromide ([BMIM][Br]) solutions. The rheological behaviors, surface tensions and conductivities of PAN/[BMIM]/[Br] solutions at different temperatures indicated that appropriately increasing the temperature is beneficial to their spinnability. It is also shown that PAN/[BMIM]/[Br] with a concentration of 3 wt%, 4 wt% and 5 wt% can be electrospun to fibers by increasing their temperatures to 70°C, 75°C or 85°C, respectively. A rotating drum composed of a dacron mesh was used as a collector in order to avoid the contraction of the wet fibers. This present study provides an alternative method for electrospinning polymer fibers.     

High pressure Raman study on the local structure of 1-ethyl-3-methylimidazolium tetrafluoroborate

We have investigated the pressure-induced Raman spectral changes of 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF₄]). We found that [emim][BF₄] did not crystallize up to 1.2 GPa. The Raman CH stretching spectra arising from the CH₃ groups of the ethyl-chain and the CH₃ group adjacent to the imidazolium-ring in [emim]⁺ cation largely changed against pressure. Moreover, the Raman intensity of the CH₂ (N) bending band arising from the alkyl-chain drastically changes with increasing pressure, but that of the imidazolium-ring in-plane bending band arising from the imidazolium-ring is independent of pressure. Our results show that the environment around the alkyl-chain of [emim][BF₄] is largely perturbed rather than that around the imidazolium-ring upon compression.     

Efficient and green synthesis of tetrasubstituted pyrroles promoted by task-specific basic ionic liquids as catalyst in aqueous media

Synthesis of tetrasubstituted pyrroles by the three-component condensation reaction of acid chlorides, dialkyl acetylenedicarboxylates, and amino acids in the presence of various room-temperature ionic liquids (RTILs) as catalysts in water is reported. Among the ionic liquids used, the basic functionalized ionic liquid, butyl methyl imidazolium hydroxide [bmim]OH, was the most effective catalyst. The influence of reaction temperature, reaction time, and amount of ionic liquid on the reaction was investigated. The [bmim]OH/H₂O catalyst system could be reused for at least five recycles without appreciable loss of efficiency.