Realization of Ultraviolet Electroluminescence from ZnO Homojunction Fabricated on Silicon Substrate with p-Type ZnO:N Layer Formed by Radical N2O Doping

ZnO homojunction light-emitting diodes are fabricated on Si（100） substrates by plasma assisted metal organic chemical vapour deposition. A p-type layer of nitrogen-doped ZnO film is formed using radical N2O as the acceptor precursor. The n-type ZnO layer is composed of un-doped ZnO film. The device exhibits desirable rectifying behaviour with a turn-on voltage of 3.3 V and a reverse breakdown voltage higher than 6 V. Distinct electrolumineseence emissions centred at 395nm and 490nm are detected from this device at forward current higher than 20mA at room temperature.     

Photoluminescence and electroluminescence properties of ZnO films on p-type silicon wafers

A simplified n-ZnO/p-Si heterojunction has been prepared by growing n-type ZnO rods on p-type silicon wafer through the chemical vapour deposition method. The reflectance spectrum of the sample shows an independent absorption peak at 384 nm, which may be originated from the bound states at the junction. In the photoluminescence spectrum a new emission band is shown at 393 nm, besides the bandedge emission at 380 nm. The electroluminescence spectrum of the n-ZnO/p-Si heterojunction shows a stable yellow luminescence band centred at 560 nm,which can be attributed to the emission from trapped states. Another kind of discrete ZnO rod has also been prepared on such silicon wafer and is encapsulated with carbonated polystyrene for electroluminescence detection. This composite structure shows a weak ultraviolet electroluminescence band at 395 nm and a yellow electroluminescence band. These data prove that surface modification which blocks the transverse movement of carriers between neighbouring nanorods plays important roles in the ultraviolet emission of ZnO nanorods. These findings are vital for future display device design.     

Effect of Mn doping on the microstructures and photoluminescence properties of CBD derived ZnO nanorods

Mn-doped ZnO nanorods were synthesized from aqueous solutions of zinc nitrate hexahydrate, manganese nitrate and methenamine by the chemical solution deposition method (CBD). Their microstructures, morphologies and optical properties were studied in detail. X-ray diffraction (XRD) results illustrated that all the diffraction peaks can be indexed to ZnO with the hexagonal wurtzite structure. Scanning electron microscope (SEM) results showed that the average diameter of Mn-doped ZnO nanorods was larger than that of the undoped one. Photoluminescence (PL) spectra indicated that manganese doping suppressed the emission intensity and caused the blue shift of UV emission position compared with the undoped ZnO nanorods. In the Raman spectrum of Mn-doped ZnO nanorods, an additional mode at about 525 cm⁻¹ appeared which was significantly enhanced and broadened with the increase of Mn doping concentration.     

Synthesis and optical properties of flower-like ZnO nanorods by thermal evaporation method

Flower-like ZnO nanorods have been synthesized by heating a mixture of ZnO/graphite powders using the thermal evaporation and vapor transport on Si (1 0 0) substrates without any catalyst. The structures, morphologies and optical properties of the products were characterized in detail by using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) and Raman spectroscopy. The synthesized products consisted of large quantities of flower-like ZnO nanostructures in the form of uniform nanorods. The flower-like ZnO nanorods had high purity and well crystallized wurtzite structure, whose high crystalline quality was proved by Raman spectroscopy. The as-synthesized flower-like ZnO nanorods showed a strong ultraviolet emission at 386 nm and a weak and broad yellow-green emission in visible spectrum in its room temperature photoluminescence (PL) spectrum. In addition, the growth mechanism of the flower-like ZnO nanorods was discussed based on the reaction conditions.     

Luminescence Properties of Nanostructure ZnO-Covered Carbon Fibers Prepared by Thermal Oxidation

We report on ZnO nanosheets and nanorods synthesized by thermal oxidation of zinc films deposited on carbon fiber surfaces. The structure and optical properties are characterized by x-ray diffraction, scanning electron microscopy and photoluminescence spectrum. An orange-red emission around 683 nm is found in the PL spectrum when the sample prepaxs at 400℃ for four hours in air. With annealing temperature increasing from 400℃ to 500℃, the blue shift is observed.     

Synthesis and optical properties of ZnO nanorods on indium tin oxide substrate

ZnO nanorods with uniform diameter and length have been synthesized on an indium-tin oxide (ITO) substrate by using a simple thermal evaporation method which is suitable to larger scale production and without any catalyst or additives. The samples were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-vis (UV-vis) absorption spectrum, photoluminescence (PL) spectrum and Raman spectrum. The single-phase ZnO nanorods grow well-oriented along the c-axis of its wurtzite structure on ITO substrate. The ZnO nanorods shows sharp and strong UV emission located at 380 nm without notable visible light emission in the PL spectrum, which suggests the good crystallinity of the nanorods, which was also testified by their Raman spectrum. The photodegradation of methylene orange (MO) in aqueous solution reveals that the well-arranged c-axis growth of ZnO nanorods possess evidently improved photocatalytic performance and these properties enable the ZnO nanorods potential application in UV laser.     

Morphological transition of ZnO nanostructures influenced by magnesium doping

Wurtzite zinc oxide (ZnO) nanochains have been synthesized through high-pressure pulsed laser deposition. The chain-like ZnO nanostructures were obtained from magnesium (Mg) doped ZnO targets, whereas vertically aligned nanorods were obtained from primitive ZnO targets. The Mg doping has influenced the morphological transition of ZnO nanostructures from nanorods to nanochains. The field emission scanning electron microscope images revealed the growth of beaded ZnO nanochains. The ZnO nanochains of different diameters 40 and 120 nm were obtained. The corresponding micro-Raman spectra showed strong E_2H mode of ZnO, which confirmed the good crystallinity of the nanochains. In addition to near band edge emission at 3.28 eV, ZnO nanochains show broad deep level emission at 2.42 eV than that of ZnO nanorods.     

Blue-to-Orange Tunable Luminescence from Europium Doped Yttrium--Silicon--Oxide--Nitride Phosphors

Europium-doped yttrium-silicon-oxide-nitride phosphors are synthesized by carbothermal reduction and nitridation method. The crystal structure of the phosphors changed gradually from oxide Y2Si2O7 to nitride YSi3N5 state with increasing dosage of Si3N4 and carbon powder. The Y2Si2O7：Eu phosphor shows a blue emission at 465 nm with 300 nm excitation and a characteristic red emission of Eu^3＋ at 612 nm with 230 nm excitation. The YSi3N5：EU phosphor shows a broad emission band centred at 595nm with some sharp peaks of Eu^3＋ with 325nm excitation. The absorption of the studied phosphors increases from 450 to 700hm with an increment in nitrogen content. Blue-to-orange tunable luminescence is observed with 390 nm excitation.     

Controlled growth and field emission properties of zinc oxide nanopyramid arrays

Single-crystalline, pyramidal zinc oxide nanorods have been synthesized in a large quantity on p-Si substrate via catalyst-free thermal chemical vapor deposition at low temperature. SEM investigations showed that the nanorods were vertically aligned on the substrate, with diameters ranging from 60 to 80 nm and lengths about 1.5 μm. A self-catalysis VLS growth mechanism was proposed for the formation of the ZnO nanorods. The field emission properties of the ZnO nanopyramid arrays were investigated. A turn-on field about 3.8 V/μm was obtained at a current density of 10 μA/cm², and the field emission data was analyzed by applying the Fowler-Nordheim theory. The stability of emission current density under a high voltage was also tested, indicating that the ZnO nanostructures are promising for an application such as field emission sources.     

A template-free sol-gel technique for controlled growth of ZnO nanorod arrays

The growth of ZnO nanorod arrays via a template-free sol-gel process was investigated. The nanorod is single-crystalline wurtzite structure with [0 0 0 1] growth direction determined by the transmission electron microscope. The aligned ZnO arrays were obtained directly on the glass substrates by adjusting the temperatures and the withdrawal speeds, without seed-layer or template assistant. A thicker oriented ZnO nanorod arrays was obtained at proper experimental conditions by adding dip-coating layers. Room temperature photoluminescence spectrum exhibits an intensive UV emission with a weak broad green emission as well as a blue double-peak emission located at 451 and 468 nm, respectively. Further investigation results show that the difference in the alignment of nanorods ascribes to the different orientations of the nanoparticles-packed film formed prior to nanorods on the substrate. Well ordered ZnO nanorods are formed from this film with good c-axis orientation. Our study is expected to pave a way for direct growth of oriented nanorods by low-cost solution approaches.     

A study on morphology control and optical properties of ZnO nanorods synthesized by microwave heating

In this study, we present morphology control investigations on zinc oxide (ZnO) nanorods synthesized by microwave heating of a mixture of zinc nitrate hexahydrate and hexamethylenetetramine (HMTA) precursors in deionized water (DI water). To study the morphology and structural variations of the obtained ZnO nanorods in different molar ratio of zinc nitrate hexahydrate to HMTA, X-ray diffraction (XRD), scanning electron microscopy (SEM) images, Raman scattering, and photoluminescence (PL) spectroscopy were measured. XRD and SEM images are utilized to examine the crystalline quality as well as the morphological properties of the ZnO nanorods. It is found that morphology control can be achieved by simply adjusting the reactant concentrations and the molar ratio of zinc nitrate hexahydrate to HMTA. Raman scattering and PL spectroscopy measurements were demonstrated to study the size- and shape-dependent optical response of the ZnO nanorods. The Raman scattering result shows that the intensity of LO mode at around 576 cm^?1 decreases with the increase in the molar ratio of zinc nitrate hexahydrate to HMTA, indicating the reduction of defect concentrations in the synthesized ZnO nanorods. Room temperature PL spectrum of the synthesized ZnO nanorods reveals an ultraviolet (UV) emission peak and a broad visible emission. An enhancement of UV emission appears in the PL spectra as the molar ratio of zinc nitrate hexahydrate to HMTA increases, indicating that the defect concentration of the synthesized ZnO nanorods can be reduced by increasing the molar ratio.     

Harvesting piezoelectric potential from zinc oxide nanoflowers grown on textile fabric substrate

ZnO nanoflowers were synthesized on conductive flexible textile fabric substrate by using the simple low‐temperature aqueous chemical growth method and were used for piezoelectric energy harvesting source. Structural characterization of ZnO nanoflowers was carried out by using surface scanning electron microscopy and X‐ray diffraction. The ZnO nanoflowers are uniformly grown over the entire sample. They are composed of needle‐like nanorods, which have hexagonal wurtzite structure with good crystalline quality. The current–voltage characteristics showed good rectifying Schottky behaviour. Contact‐mode atomic force microscopy was used for measuring the piezoelectric output potential. The maximum output potential was found to be more than 600 mV and the corresponding current also recorded was near ～650 nA. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

ZnO Nanorods Produced by the Method of Arc Discharge

ZnO nanorods are fabricated by arc discharge with ZnO powder as source materials. The sample is characterized by x-ray diffraction, Raman scattering spectra, scanning electron microscopy and high-resolution transmission electron microscopy. The ZnO nanorods exhibit single crystals with the hexagonal wurtzite structure. Many of them are tetrapod-like. The diameters range from several nanometres to about lOOnm, and the main diameters of the nanorods is around 20nm. The length-to-diameter ratio is more than 5, and the grown directions are along the [001] axis. Photoluminescence spectra show a narrow ultraviolet emission at around 389nm and a broad green emission at around 520 nm. The growth process can be interpreted by the vapour-solid mechanism.     

花状ZnO纳米结构的液相合成和光学性能

在常压下,以ZnCl2和NaOH为原料,不添加任何表面活性剂等有机物质,研究了用60℃恒温搅拌的湿化学法制备花状纳米ZnO。XRD、SEM和TEM分析结果表明:所得纳米ZnO是由平均直径约为80nm左右的纳米棒组成的花状结构,其平均长度可达1μm;利用紫外-可见分光光度计测试了光吸收性能,发现ZnO产物对300～380nm波长范围的光有强的吸收性;室温光致发光光谱显示:产物在462nm和620nm处分别出现了蓝光发射和较强较宽的红光发射。     

Influence of S incorporation on the luminescence property of ZnO nanowires by electrochemical deposition

Sulfur-doped zinc oxide (ZnO) nanowires have been successfully synthesized by an electric field-assisted electrochemical deposition in porous anodized aluminum oxide template at room temperature. X-ray diffraction and the selected area electron diffraction results show that the as-synthesized nanowires are single crystalline and have a highly preferential orientation. Transmission electron microscopy observations indicate that the nanowires are uniform with an average diameter of 120 nm and length up to several tens of micrometers. Room-temperature photoluminescence is observed in the doped ZnO nanowires, which exhibits a violet emission and blue emissions besides the typical photoluminescence spectrum of a single crystal ZnO.     

A simple growth route towards ZnO thin films and nanorods

Highly orientated ZnO thin films and the self-organized ZnO nanorods can be easily prepared by a simple chemical vapor deposition method using zinc acetate as a source material at the growth temperature of 180 and 320 °C, respectively. The ZnO thin films deposited on Si (100) substrate have good crystallite quality with the thickness of 490 nm after annealing in oxygen at 800 °C. The ZnO nanorods grown along the [0001] direction have average diameter of 40 nm with length up to 700 nm. The growth mechanism for ZnO nanorods can be explained by a vapor-solid (VS) mechanism. Photoluminescence (PL) properties of ZnO thin films and self-organized nanorods were investigated. The luminescence mechanism for green band emission was attributed to oxygen vacancies and the surface states related to oxygen vacancy played a significant role in PL spectra of ZnO nanorods.     

Preparation and Luminescence Characteristics of Ca3Y2（BO3）4：Eu^3＋ Phosphor

Ca3Y2 （BO3）4：Eu^3＋ phosphor is synthesized by high temperature solid-state reaction method, and the Iuminescence characteristics are investigated. The emission spectrum exhibits two strong red emissions at 613 and 621 nm corresponding to the electric dipole ^5 Do- ^7F2 transition of Eu^3＋ under 365 nm excitation, the reason is that Eu^3＋ substituting for Y^3＋ occupies the non-centrosymmetric position in the crystal structure of Ca3 Y2 （BO3）4. The excitation spectrum for 613 nm indicates that the phosphor can be effectively excited by ultraviolet （UV） （254 nm, 365nm and 400nm） and blue （470nm） light. The effect of Eu^3＋ concentration on the emission intensity of Ca3 Y2 （BO3）4 ：Eu^3＋ phosphor is measured, the result shows that the emission intensities increase with increasing Eu^3＋ concentration, then decrease. The CIE colour coordinates of Ca3Y2 （BO3）4：Eu^3＋ phosphor is （0.639, 0.357） at 15mol% Eu^3＋.     

Characterization and optical property of ZnO nano-, submicro- and microrods synthesized by hydrothermal method on a large-scale

In the present paper, well-dispersed ZnO nano-, submicro- and microrods with hexagonal structure were synthesized by a simple low temperature hydrothermal process from zinc nitrate hexahydrate without using any additional surfactant, organic solvent or catalytic agent. The phase and structural analysis were carried out by X-ray diffraction (XRD), the morphological analysis was carried out by field emission scanning electron microscopy (FESEM) and the optical property was characterized by room-temperature photoluminescence (PL) spectroscopy. The results revealed the high crystal quality of ZnO powder with hexagonal (wurtzite-type) crystal structure and the formation of well-dispersed ZnO nano-, submicro- and microrods with diameters of about 50, 200 and 500 nm, and lengths of 300 nm, 1 μm and 2 μm, respectively, on a large-scale just using the different temperatures. Room-temperature PL spectrum from the ZnO nanorods reveals a strong UV emission peak at about 360 nm and no green emission band at ∼530 nm. The strong UV photoluminescence indicates the good crystallization quality of the ZnO nanorods. Room-temperature PL spectra from the ZnO submicro- and microrods reveal a weak UV emission peak at ∼400 nm and a very strong visible green emission at 530 nm, that is ascribed to the transition between V_oZn_i and valence band.     

In掺杂的ZnO纳米棒的共振Raman光谱研究

本文报道In掺杂ZnO纳米棒的成功制备和对其结构以及光荧光性能的详尽研究。在室温条件下ZnO的共振拉曼谱线容易受到很强的荧光干扰, 甚至导致共振拉曼谱线完全被湮没。微量In掺杂入ZnO纳米棒中, 调控紫外发光峰由378 nm(纯ZnO)红移至397 nm; 另外, 在制备过程中引入过量的氧, 在样品中产生大量缺陷, 降低了ZnO的紫外近带边发光峰强度。这两方面导致在室温下可清楚的观察到In掺杂ZnO纳米棒的6阶LO拉曼峰。     

ZnO纳米花的制备及其性能

利用化学气相沉积法, 在铜箔上成功制备出形似自然界中刺球花的ZnO纳米花结构. 实验进一步研究了氧气和氩气流量比例分别为1:150, 1:200, 1:250和1:400时对ZnO纳米花结构和性能的影响. 结果表明, ZnO纳米花上的ZnO纳米棒的长径比随氧气氛的减少而减小; 在氧气和氩气流量比例为1:250时制备出的ZnO纳米花尺寸均匀、形貌均一、花型结构最完美. ZnO 纳米花的室温光致发光谱表明, 随着氧气氛的减少, 可见区域的发光从一个波包变成一个宽峰, 且与锌空位相关的缺陷发光峰在减弱, 与氧空位相关的缺陷发光峰在增强. 基于实验结果, 提出了一种在铜箔上制备ZnO纳米花结构的生长模型.