表面等离子体子共振传感器用于研究不同材质包裹的磁性纳米粒子性质

利用自行设计组装的以白色发光二极管为光源的表面等离子体子共振传感器实验装置, 检测了不同材质包裹的磁性纳米粒子连接靶向DNA与生物素化DNA探针的结合程度. 结果表明, 与聚苯乙烯磁性微球连接的靶向DNA相比, Fe3O4@SiO2核壳式纳米微球连接的靶向DNA与生物素化的DNA探针结合速率较快, 且其相对标准偏差较小.     

金蒲抑瘤片在鼻咽癌的临床应用研究

为探讨鼻咽癌患者放疗期间合并应用金蒲抑瘤片治疗对细胞免疫功能及血中微量元素硒、锌、铜的影响，经病理证实鼻咽癌患者58例，随机分为放疗服药组30例和单纯放疗组28例。两组放疗前后抽静脉血测定T细胞亚群（CD3＋，CD4＋，CD8＋，CD4＋／CD8＋），血中微量元素硒，锌，铜并与30例健康者（正常对照组）进行比较。结果表明，鼻咽癌患者血中微量元素硒，锌，铜及CD3＋，CD4＋，CD4＋／CD8＋显著低于健康人，放疗期间合并应用金蒲抑瘤片治疗后血中微量元素硒，锌，铜及CD3＋，CD4＋，CD4＋／CD8＋较服药前显著升高。提示鼻咽癌患者细胞免疫功能低下，血中微量元素硒，锌，铜显著低于健康人。金蒲抑瘤片能提高鼻咽癌患者因中微量元素硒，锌，铜含量，使低下的细胞免疫功能迅速恢复。     

N-去甲万古霉素的亲和吸附

通过交联聚丙烯酸甲酯与乙醇胺反应,形成聚(N-羟乙基丙烯酰胺)树脂,在酸催化作用下与环氧氯丙烷反应,形成含有α-羟基氯乙基的树脂.含α-羟基氯乙基的树脂与D-丙氨酸、L-丙氨酸或甘氨酸反应,分别得到含有这3种氨基酸的吸附剂.这3种吸附剂吸附N-去甲万古霉素的结果表明,含D-丙氨酸的吸附剂的吸附量最大,含甘氨酸的吸附剂的吸附量次之,而含L-丙氨酸的吸附剂不吸附N-去万古霉素.说明前两种吸附剂对N-去甲万古霉素存在亲和吸附作用.含D-丙氨酸吸附剂的最佳吸附pH值为5.8,当吸附液中的盐(NaCl)浓度增加时,吸附量降低.用0.4mol/LNa₂CO₃/CH₃CN(摩尔比7∶3,pH=9.5)作为洗脱剂可完全脱附被吸附的N-去甲万古霉素.     

乳腺癌术前灰阶超声与彩色多普勒超声联合应用对预后的预测价值

目的探究乳腺癌术前灰阶超声与彩色多普勒超声联合应用对预后的预测价值。方法选取温州医科大学附属第一医院2013年5月—2015年5月期间收治的乳腺癌患者83例,治疗前均行灰阶超声与彩色多普勒超声检查,分析患者超声检查结果、临床征象与术后随访2年期间患者预后的关系,从而分析术前灰阶超声与彩色多普勒超声联合应用对乳腺癌患者预后的预测价值。结果乳腺癌肿块边界清晰、边界不清晰、边界恶性晕的患者2年无瘤生存率依次降低,边界恶性晕与边界不清晰患者死亡率均显著高于边界清晰患者(P0.05);肿瘤≥2 cm患者2年无瘤生存率显著低于2 cm患者;淋巴结转移患者2年无瘤生存率显著低于无转移患者(P0.05);血流分级Ⅱ级患者2年无瘤生存率明显低于0级(P0.05),Ⅲ级患者2年无瘤生存率显著低于0级和Ⅰ级(P0.05)。结论乳腺癌患者术前联合应用灰阶超声与彩色多普勒超声检查可确定肿瘤边界、大小及淋巴转移等征象,其与患者无瘤生存率、死亡率等预后指标密切相关,可作为预测乳腺癌患者预后的重要方法。     

CRYSTALLIZATION OF BLENDS OF AN ASYMMETRIC POLY（OXYETHYLENE）-b-POLY（OXYBUTYLENE） BLOCK COPOLYMER WITH POLY（OXYBUTYLENE）

An oxyethylene/oxybutylene block copolymer with asymmetric volume fraction (E115B103) was blended with oxybutylene homopolymer (Bh) at different volume fractions of the block (φE). Crystallization behavior of the blends was studied and was compared with that of the blends from a symmetric block copolymer (E114B56). It was found that the crystallization temperature of E115B103/B28 blend is lower than that of the blends from symmetric block copolymer. For the blend with φE= 0.30 breakout crystallization with an Avrami exponent n ≈ 3.0 is observed. At φE = 0.22 the blend exhibits a variable crystallization behavior: confined crystallization with n ≈ 1.0 at lower crystallization temperatures but breakout crystallization at high crystallization temperatures. For the blend with φE = 0.14 and sphere morphology confined crystallization occurs at all crystallization temperatures studied. When compared with the blends from symmetric block copolymer, confined crystallization occurs more easily in the E115B103/B28 blends. The SAXS results agree with the isothermal crystallization kinetics. Deformation of the confined crystalline block is observed in the blend with φE = 0.14 and mixed lamellar and cylinder morphologies in the blend with φE = 0.22.     

Evidences of macromolecular chains confinement of ethylene–propylene copolymer in organophilic montmorillonite nanocomposites

A random ethylene–propylene copolymer (EPM) functionalized with grafted diethylsuccinate groups was melt blended with increasing amount (to 20 wt%) of organophilic montmorillonite (OMMT) to prepare nanocomposites with different morphologies as evidenced by XRD and TEM analysis. All the nanocomposites were treated with boiling toluene that did not extract a significant amount of EPM. The increase of not-extracted EPM with the increasing quantity of OMMT suggested strong interactions of the polymer chains with the inorganic substrate. The DSC measurements of nanocomposites and the corresponding insoluble residues revealed a higher T_g values with larger amount of inorganic particles. The dielectric relaxation analysis confirmed the evidence of strong interactions among montmorillonite and the polar diethylsuccinate groups for the macromolecules trapped due to the presence of the inorganic layers. The results were discussed with reference to their relevance as an evidence of nanoconfinement at polymer clay interface and correlated with the clay basal distance variation due to the intercalation process.     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Comparison of electrothermal atomization diode laser Zeeman- and wavelength-modulated atomic absorption and coherent forward scattering spectrometry

Atomic absorption and coherent forward scattering spectrometry by using a near-infrared diode laser with and without Zeeman and wavelength modulation were carried out with graphite furnace electrothermal atomization. Analytical curves and limits of detection were compared. The magnetic field was modulated with 50 Hz, and the wavelength of the diode laser with 10 kHz. Coherent forward scattering was measured with crossed and slightly uncrossed polarizers. The results show that the detection limits of atomic absorption spectrometry are roughly the same as those of coherent forward scattering spectrometry with crossed polarizers. According to the theory with bright flicker noise limited laser sources the detection limits and linear ranges obtained with coherent forward scattering spectrometry with slightly uncrossed polarizers are significantly better than those obtained with crossed polarizers and with atomic absorption spectrometry. This is due to the fact that employing approaches of polarization spectroscopy reduce laser intensity fluctuations to their signal carried fractions.     

卤代苯与水分子间作用的从头算

污染是科学家关注的热点问题,化学污染物是造成水污染的重要因素［１］．在水环境中,卤代苯是一类优先污染物（ｐｒｉｏｒｉｔｙｐｏｌｕｔａｎｔｓ）［２］．这类污染物毒性大,在环境中的半衰期长,美国环保局（ＥＰＡ）已经把它们列入优先污染物之列．Ｖｅｒｓｃｈｎ...     

A hierarchically zeolite Y for the N-heterocyclic compounds synthesis

High activity and selectivity of the hierarchical H-Ymmm zeolite in the synthesis of practically important pyridines (by interaction of C₂–C₄ alcohols with formaldehyde and ammonia, cyclocondensation of acetaldehyde and propanal with ammonia), dialkyl quinolines (by reaction of aniline with aldehydes) and alkyl dihydroquinolines (by reaction of aniline with ketones- acetone, acetophenone) were revealed in the research.The advantages of the micro-meso-macroporous H-Ymmm zeolite over the microporous H-Y zeolite in the synthesis of pyridines and quinolines were demonstrated. In the products formed by the reaction of ethanol with formaldehyde and ammonia, picolines (up to 63%) and lutidine are predominant in H-Ymmm, Pb-H-Ymmm and Fe-H-Ymmm zeolites. The interaction of n-propanol (n-butanol) with formaldehyde and ammonia in the presence of H-Ymmm zeolite with high selectivity produced 3,5-lutidine (up to 90%) or 3,5-diethylpyridine (85%). H-Ymmm zeolite makes it possible to prepare 2-methyl-5-ethylpyridine with 87% selectivity (reaction of acetaldehyde with ammonia) and 2-ethyl-3,5-dimethylpyridine with 58% selectivity (reaction of propanal with ammonia).The synthesis of dialkylquinolines and dialkyltetrahydroquinolines with a total selectivity of 65–73% by the interaction of aniline with C₃–C₅ aldehydes has been carried out. The dihydroquinoline derivatives with the selectivity of up to 70% have been synthesized by the reaction of aniline with ketones (acetone, acetophenone).     

Employment of Electrochemical Techniques for Metallothionein Determination in Tumor Cell Lines and Patients with a Tumor Disease

In the present paper we employed adsorptive transfer stripping technique coupled with chronopotentiometric stripping analysis for determination of metallothionein (MT) in tumor cell lines and differential pulse voltammetry Brdicka reaction for determination of MT in blood serum of patients with head and neck cancer or retinoblastoma, and of rats treated with cisplatin with respect to discuss the role of MT in formation of resistance on treatment with heavy metal based cytostatics. The cisplatin or carboplatin sensitive and resistant neuroblastoma cell lines were derived from the maternal cell line isolated from the bone metastasis of patients with neuroblastoma. Based on the results obtained it can be concluded that level of MT increases with higher dose of platinum based cytostatics at cells. Further we focused on determination of MT in blood serum of rats treated with cisplatin (two doses 1.05 mg and/or 2.1 mg of cisplatin per kg). The highest level of MT at rats treated with 1.05 mg cisplatin was determined after four hours as 4.9 μmol/L. In the case of the second experimental group the maximum was reached even after two hours of the treatment as 4.8 μmol/L. In addition we were interested in the effect of cisplatin or carboplatin treatment of patients with a tumor disease. At patients with tumor in head and neck area treated with cisplatin we observed that the level of MT was going higher due to administration of the drug. This phenomenon was observed at all patients. However at patients with retinoblastoma treated with carboplatin we observed various phenomena including decreasing, increasing or no changes in MT level. Progression of MT levels was therefore individual and probably depended on tumor resistance to carboplatin.     

Thin-layer chromatographic and high-performance thin-layer chromatographic ready-for-use layers with lipophilic modifications

Stable silica gel sorbents with aliphatic or aromatic groups are formed by chemical modifications of the silanol groups with special reactive silanes. Various lipophilic surface modifications on silica gels with varying pore structures are tested with regard to their chemical and physico-chemical characteristics, their wettability and their chromatographic retention data. The main problem in TLC is the preparation of abrasion-resistant layers on glass or on foils which meet the usual high standard of quality and are also suited for quantitative determinations. Thin-layer chromatography on reversed-phase layers can only be performed if the complete wettability of the lipophilic stationary phase in dry form is guaranteed by the mobile phase. Adsorption-chromatographic separations with lipophilic eluents and reversed-phase partition-chromatographic separations with hydrophilic eluents are performed, for example, with dyes, with polycyclic aromatic hydrocarbons and with lipids. The great differences in selectivity caused by the various modifications of the sorbent and the varying eluent composition are remarkable. Ready-for-use layers with lipophilic surface modifications complement the existing range of pre-coated layers and thus widen the application of TLC and HPTLC considerably.     

Studies with Functionally Substituted Methylbenzotriazoles: Novel Synthesis of Functionally Substituted Pyrazolo[5,1‐c]‐1,2,4‐Triazines Benzotriazol‐1‐yl, 1‐Pyrazol‐4‐yl Benzotriazoles and 1‐Isoxazol‐4‐yl Benzotriazoles

1‐Benzotriazolylacetophenone 1 couples with aromatic diazonium salts to yield the corresponding coupling products 2 . Reaction of 1 with diazotized aminopyrazole afforded the benzotriazolylpyrazolo[5,1‐c][1,2,4]triazine 6 . Compound 1 condensed with DMFDMA to yield the enaminone 7 which reacted with hydrazines to yield the pyrazoles 8a,b . Isomeric pyrazoles 10 were synthesized via condensing 1 with phenyl‐hydrazine and subsequent condensation of the formed phenylhydrazone 9 with DMFDMA. Reaction of 7 with hydroxylamine afforded the isoxazole 11 which was converted into the nitrile 13 on reflux in dioxane in the presence of sodium hydride. Compound 13 was also directly obtained from reaction of 1 with 1‐cyanobenzo‐triazole. The reaction of 1 with hippuric acid and arylidenemalononitriles 18a‐c afforded the pyranone 17 and pyridine derivatives 23a‐c , respectively.     

Peptide peak intensities enhanced by cysteine modifiers and MALDI TOF MS

Two cysteine‐specific modifiers we reported previously, N‐ethyl maleimide (NEM) and iodoacetanilide (IAA), have been applied to the labeling of cysteine residues of peptides for the purpose of examining the enhancement of ionization efficiencies in combination with matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI TOF MS). The peak intensities of the peptides as a result of modification with these modifiers were compared with the peak intensities of peptides modified with a commercially available cysteine‐specific modifier, iodoacetamide (IA). Our experiments show significant enhancement in the peak intensities of three cysteine‐containing synthetic peptides modified with IAA compared to those modified with IA. The results showed a 4.5–6‐fold increase as a result of modification with IAA compared to modification with IA. Furthermore, it was found that IAA modification also significantly enhanced the peak intensities of many peptides of a commercially available proteins, bovine serum albumin (BSA), compared to those modified with IA. This significant enhancement helped identify a greater number of peptides of these proteins, leading to a higher sequence coverage with greater confidence scores in identification of proteins with the use of IAA. Copyright © 2012 John Wiley & Sons, Ltd.     

Analytical temperature rising elution fractionation of different polyethylene types using a column filled with carbon nanotubes

A high temperature gel permeation chromatograph (GPC) was coupled with a gas chromatograph (GC) oven to obtain an analytical temperature rising elution fractionation (TREF) system with evaporative light scattering detection. On this instrument, a new column partially filled with pristine carbon nanotubes (CNT) was tested by evaluating the elution profiles in function of temperature (thermograms) of different polyethylene (PE) types. By comparing these thermograms with those obtained with a traditional TREF column filled with metallic wires, the adsorption of polymer chains on the pristine CNT was clearly evidenced. The thermograms given by the column filled with CNT are similar with those provided by literature when chromatographic columns filled with porous graphitic carbon are used for this application, usually described as high temperature thermal gradient interaction chromatography (HT-TGIC).     

Hydrophile Polymergele mit reaktiven Gruppen, 4. Mitt.: Chelatharze mit schwefelhaltigen Ankergruppen auf Basis von Saccharosemethacrylaten

Chelating resins with thioglycolate anchor groups have been synthesized by reaction of sucrosemethacrylate gels with thioglycolic acid. The capacities of the gels were found to be extremely high for Ag⁺ (5,3 mmol/g) and Hg²⁺ (4,9 mmol/g). About 1 mmol Hg²⁺/g could be recovered from the gel reversibly by treatment with hydrochloric acid. The removal of Hg²⁺ from aqueous 3M alkalichloride solutions was possible with capacities of 1 mmol/g.Sucrosemethacrylate gels with primary aromatic amino group were reacted with CS₂/NH₃ to yield gels with dithiocarbamate groups. Gels with thiorea groups were prepared by reaction of the amino groups with NH₄SCN/HCl. Diazotation of the amino groups, subsequent reaction with potassium xanthogenate and hydrolysis afforded gels with thiol groups. Thiol containing gels were synthesized also by reaction of the diazotised gels with Na₂S₂ and subsequent reduction with Na₂S. Reaction of the diazotised gels with mercaptans yielded resins with thioether anchor groups. The capacities of the sulfur containing gels were found to be max. 4,1 mmol/g for Hg²⁺ and 5,9 mmol/g for Ag⁺. About 35% of the bonded Hg²⁺ could be eluted resersibly with 3N-HCl.

     

Growth of Au@Ag Core–Shell Pentatwinned Nanorods: Tuning the End Facets

Au@Ag core–shell nanorods with tunable end facets are obtained by coating Au bipyramids (BPs) with Ag. The resultant nanorods exhibit a pentatwinned crystal structure with tips terminated with either {110} or {111} facets. The control over the end facets is achieved by varying the capping agents and tuning the reduction rate of Ag. Specifically, when Ag is reduced slowly, Au@Ag nanorods with flat {110} end facets are formed with cetyltrimethylammonium bromide (CTAB) as the capping agent. If CTAB is replaced with cetyltrimethylammonium chloride (CTAC), Au@Ag nanorods with tips terminated with {111} facets are obtained. However, at a high Ag reduction rate, dumbbell‐shaped Au@Ag nanorods are formed, with either CTAB or CTAC as the capping agent. The morphological evolution of the nanorods in each case is closely followed and a growth mechanism is proposed.     

Alkaline fuel cells: Calculating and comparing overall currents of hydrophobized cathodes with thin regular-structure and thick stochastic-structure active layers

A concept of active hydrophobized active layers with regular structure is introduced. In these layers, a hydrophobizer takes part in the development of gas pores representing a set of straight identical rods (cylinders) uniformly distributed over the active layer and extended in a direction perpendicular to the cathode surface. An advantage of cathodes with a thin regular-structure active layer is the reproducibility of their characteristics and a low content of platinum catalyst (up to tenth and even hundredth fractions of mg/cm²). A comparison of current characteristics of thin (with the thickness of several tens of μm) active layers with a regular structure and thick (with the thickness of several hundreds of μm) with the stochastic distribution of the hydrophobizer (with randomly distributed polytetrafluoroethylene) is made. For a fuel cell with an alkaline electrolyte (7 M KOH at 60°C), calculations show that at potentials below 0.5 V (RHE), the cathodes with thin regularstructure active layers demonstrate higher overall currents as compared with cathodes covered with thick active layers with a stochastic structure. However, the opposite trend is observed at potentials above 0.5 V. To increase the current in cathodes with thin regular-structure active layers, it is possible to, first, increase the active layer thickness and, second, decrease the size of hydrophobizer grains in them.     

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes utilizing silyl group-substituted titanium carbene complexes as bimetallic synthetic reagents

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes by the sequential reactions using silyl group-substituted titanium carbene complexes was studied. Dienylsilanes were obtained by the olefination of carbonyl compounds with γ-silylvinylcarbene complexes. Cyclopropanation of 1-alkenes with the vinylcarbene complexes produced (E)-(β-silylvinyl)cyclopropanes with high stereoselectivity. The reaction of β-(trialkylsilyl)carbene complexes with zinc alkoxides of homopropargyl alcohols produced 6-silyl-3,5-hexadien-1-ols with high regio- and stereoselectivity. The (E)-alkenylsilanes thus obtained were transformed into a range of unsaturated compounds by the palladium-catalyzed or copper(I)-promoted cross-coupling with organic halides with retention of configuration.     

Coaxially bifocal liquid crystal lens with switchable optical aperture

An electrically tunable liquid crystal (LC) lens with dual hole-patterned electrodes is demonstrated. When the LC lens is operated at low voltages, the dual hole-patterned electrodes with different diameters impart the lens with a coaxial bifocal characteristic. At high voltages, the proposed LC lens functions as a conventional lens with a single focal length but with a switchable optical aperture. The demonstrated LC lens is free of disclination lines because of the presence of voltage-assisted high pretilt angles created from the upmost hole-patterned electrode with small diameter.