非晶和纳米ZrO2·Y2O3(15%)的X射线衍射与扩展X射线吸收精细结构研究

利用粉末X射线衍射和扩展X射线吸收精细结构(EXAFS)技术对用化学共沉淀法制备的非晶和纳米ZrO₂·15%Y₂O₃体系进行了研究.粉末X射线衍射结果表明,300℃温度处理的样品呈非晶态,500℃时样品已经晶化,形成单一立方相的纳米结构.EXAFS分析显示,在从非晶态向纳米结构晶化的过程中,最近邻的ZrO配位层的配位数和键长没有发生明显的改变,说明300℃时已经形成和900℃相同的最近邻局域结构.而对于ZrZr(Y)配位层,随着晶粒尺寸的减 关键词： EXAFS 晶化 配位数 键长     

EXAFS measurements on FeB metallic glasses: Asymmetry of the radial distribution function

The EXAFS structure measured above the K-edge of Fe in the disordered Fe₈₀B₂₀ alloy is reported. Complete agreement is obtained with X-ray diffraction results in the position of the first neighbours coordination shell when the asymmetry of the Radial Distribution Function (R.D.F.) into the EXAFS formula is included. A Finney-like R.D.F. is used to describe the pair distribution of these metallic glasses. The weak temperature dependence of the spectra is discussed in terms of the structural properties of these amorphous alloys.     

Analysis of oxygen shell splitting in hydrothermally grown single crystal ThO2(200)

Single crystals of ThO₂ have been synthesized using hydrothermal growth and studied using the X‐ray absorption fine structure (XAFS) technique. The extended X‐ray absorption fine structure (EXAFS) has been extracted from the XAFS and analyzed using a novel, computational Latin hypercube sampling method. The methodology not only confirms the expected space group and crystal structure, it also identifies the origin of a previously reported split O shell. Since EXAFS is a local order analysis technique, the O shell splitting is identified as an O atom occupying an interstitial site. This result is significant for examining O^2– transport in a ThO₂ matrix and corroborating research indicating partial Th 5f occupancy that is similar to hyper‐stoichiometric UO_2+x compounds. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

EXAFS方法在金属玻璃结构研究中的误差分析

本文对EXAFS方法在金属玻璃结构研究中所得径向距离的误差进行了分析。所做的模拟计算表明当前流行的关于这个问题的误差理论不能圆满地解释这一现象。本文分析了玻璃态和晶态的相移函数,指出在相似的体系中玻璃态和晶态相移函数与k的关系采用线性函数近似时,其斜率可能是不同的,而且无序度相差越大,两者的偏差可能也越大。在EXAFS数据处理过程中,没有考虑这种偏差的影响是造成EXAFS方法结果中径向距离误差的一个原因。本文还提出了一个修正参考样品(晶态)相移函数斜率偏差的方法,并将它应用于Cu₅₅Zr₄₅金属玻璃的EXAFS数据处理中,所得结果与用X射线异常散射方法测定的结果符合得很好。 关键词：     

Structural studies of nanocrystalline oxides

We report the results of structural studies of samples of nanocrystalline tin oxide, zirconia, magnesia, alumina and silica, prepared by sol–gel techniques (including the addition of silica to restrict grain growth) and high-energy ball milling. XRD, EXAFS/XANES and MAS-NMR analyses were used to characterise the materials. EXAFS showed that nanocrystals of ZrO₂ and SnO₂ prepared by sol–gel methods are highly crystalline, consistent with previous EXAFS studies of sol–gel prepared nanocrystalline oxides [A.V. Chadwick, M.J. Pooley, K.E. Rammutla, S.L.P. Savin, A. Rougier, J. Phys.: Condens. Matter, 15 (2003) 431.; A.V. Chadwick, G.E. Rush, in Nanocrystalline Metals and Oxides: Selected Properties and Applications, (Kluwer, New York), (2002), p.133.]. In contrast, the sol–gel prepared SiO₂ appeared amorphous, even after prolonged heating at 1200 °C. The EXAFS of the ball-milled samples showed clearly attenuated signals that cannot be attributed solely to particle size. Ball milling of quartz crystals (which have a simple Q₄) first broadens the NMR line and then generates Q₃ and then Q₂ lines indicating the generation of amorphous materials in the samples.     

EXAFS investigation of amorphous-to-crystal transition in Ge

The structure of a-Ge as a function of the deposition temperature T_s has been studied by the EXAFS technique for the first time. The results demonstrate the sensitivity of EXAFS to structural differences in the medium range. The data provide strong evidence for a continuous transition from the amorphous to the crystalline phase over a temperature interval form 130°C to 300°C. The analysis of the data is in line with the microcrystal model of amorphous Ge films and allows an estimate of the average grain size for the lower range T_s used.     

Structural properties of the donor indium in nanocrystalline ZnO

The structural properties of the nanocrystalline semiconductor ZnO (nano-ZnO) doped with the donor Indium were investigated by perturbed γγ angular correlation spectroscopy (PAC) and extended X-ray absorption fine structure measurements (EXAFS). Up to an average concentration of one In atom per nanocrystallite, PAC measurements show that about 12% of the ¹¹¹In atoms are incorporated on substitutional Zn sites. At higher In concentrations, new In defect complexes are visible in the PAC spectra, which dominate the spectra if the average In concentration exceeds one In atoms per nanocrystallite. In addition, the local environment of Zn and In atoms in In doped nano-ZnO was investigated by EXAFS. The measurements at the K edge of Zn show that the crystal structure of nano-ZnO corresponds to bulk ZnO. In heavily In doped nano-ZnO the EXAFS experiments at the K edge of In exhibit an expansion of the first O shell about the In site. Since about four O atoms are detected in this first shell a substitutional incorporation of the In atoms in the ZnO lattice is suggested. The second shell to be occupied by Zn atoms as well as higher shells are almost invisible, which might have the same microscopic origin as the occurrence of defect complexes observed by PAC.     

远红外光纤材料(MnF2)x(BaCl2)100-x玻璃结构的EXAFS和WAXS研究

本文用扩展X射线吸收谱(EXAFS)和X射线大角散射谱(WAXS)对远红外光纤材料复合卤化物玻璃(MnF₂)_x(BaCl₂)_166-x(x=65,60,55)的短程结构进行了研究。从MnK吸收限的EXAFS和样品的非晶衍射图,得到了Mn原子的近邻原子配位信息。结果表明F,Cl原子在Mn原子周围形成了混合配位的八面体(MnCl₂F₄),这些八面体以Mn—F键为桥键连成“之”字型 关键词：     

Structure Studies of Platinothioneins by Using Extended X-Ray Absorption Fine Structure Spectroscopy

The metal binding sites in the two Pt containing metallothioneins (Pt₇MT and Pt₁₄MT) were examined by means of Pt(II) L₃-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. Comparisons between the phase and amplitude functions derived from the isolated shells to those of Pt…Pt, Pt-S and Pt-N model components showed that each platinum in Pt₇MT was coordinated by four sulfur atoms at a distance of 2.31±0.01 Å. Analysis of the outer shell data of platinum atom in Pt⁷MT indicated backscattering platinum atom at approximate 4.29 Å. Strikingly different structural parameters had been obtained for the Pt¹⁴MT species, fitting of the first shell revealed that each platinum was coordinated by two sulfurs at the distance of 2.30±0.02 Å and two nitrogens at 2.02±0.02 Å. The results of the work provided the detailed information concerning the local environments of the coordinated Pt(II) in these two platinothioneins.     

Simultaneous calorimetric and quick‐EXAFS measurements to study the crystallization process in phase‐change materials

A Calvet‐type differential scanning calorimeter has been implemented on a synchrotron beamline devoted to X‐ray absorption spectroscopy. As a case study, the complex crystallization process in amorphous Ge₁₅Sb₈₅ phase‐change material is followed by simultaneous calorimetric and quick‐EXAFS measurements. A first crystallization at 514(1) K is related to the crystallization of an Sb‐rich phase accompanied by segregation of Ge atoms. Upon further heating, the as‐formed amorphous Ge regions crystallize at 604(1) K. A quantitative analysis of the latent heat allows a Ge₁₁Sb₈₉ stoichiometry to be proposed for the first crystallized phase.     

Matrix embedded cobalt-carbon nano-cluster magnets: behavior as room temperature single domain magnets

A new type of Co-C nanoparticles is synthesized from CH₂Cl₂ solution of Co₄(CO)_{1 2} by heating up to 210 ^°C in a closed vessel. Transmission electron microscope (TEM) and electron energy loss spectroscopy (EELS) observation show that the particles are embedded in amorphous carbon and their average size is 12 nm. The radial structure function obtained from the extended X-ray absorption fine structure (EXAFS) of the Co K-edge absorption of the Co-C nanoparticles provides a Co-C average distance of 2.08 Å and the Co-Co distances of 3.18 Å and 3.9 (±0.2) Å. The particles exhibit the magnetic hysteresis curve with a coercive force of 200 Oe at 20 K and 260 Oe at 300 K. The temperature dependence of the magnetic susceptibility measured under zero-field cooling and 10 Oe field cooling conditions exhibits the behavior characteristic of a set of single magnetic domain nanomagnets in an amorphous carbon matrix.     

Study of the electronic structure of rhenium and tungsten oxides on the O K-edge

Oxygen K-edge x-ray absorption spectra were studied on the electrochromic amorphous thin film a-WO₃ in the comparison with crystalline oxides having variable electronic (d⁰, d¹, d²) and atomic structure: monoclinic m-WO₃ (insulator - d⁰), cubic Na_0.6WO₃ (metal - d¹), cubic ReO₃ (metal - d¹), layered-type hexagonal h-WO₃, WO₃H₂O and with intercalated H_xReO₃ (metal - d²), H_xWO₃ oxides having a metal-isulating transition. The changes in the XANES range 10–15 eV above the absorption edge are interpreted based on the known band-structure calculations. The high-energy features are related to the multiple-scattering processes (EXAFS) on the nearest atoms. The intensity of the feature at 550–560 eV is attributed for the first time to the value of the metal-oxygen-metal bond angle. Paper presented at the 5th Euroconference on Solid State Ionics, Benalmádena, Spain, Sept. 13–20, 1998.     

Determining the radial pair distribution function from X‐ray absorption spectra by use of the Landweber iteration method

The Landweber iteration approach is used to construct the radial pair distribution function (RPDF) from an X‐ray absorption (EXAFS) spectrum. The physical motivation for the presented investigation is the possibility to also reconstruct asymmetric RPDFs from the EXAFS spectra. From the methodical point of view the shell fit analysis in the case of complicated spectra would be much more eased if the RPDF for the first shell(s) are computed precisely and independently. The RPDF, as a solution of the fundamental EXAFS integral equation, is examined for theoretical examples, and a detailed noise analysis is performed. As a real example the EXAFS spectrum of curium(III) hydrate is evaluated in a stable way without supplementary conditions by the proposed iteration, i.e. by a recursive application of the EXAFS kernel.     

EXAFS and XRD studies of an amorphous Co57Ti43 alloy produced by mechanical alloying

We have investigated the local atomic order of an amorphous Co₅₇Ti₄₃ alloy produced by mechanical alloying by means of x-ray diffraction and EXAFS analyses on Co and Ti K-edges. Average coordination numbers and average interatomic distances between first neighbors where found from EXAFS and compared with those determined using an additive hard sphere (AHS) model associated with an deconvolution, and also with data from bcc- Co₂Ti compound. EXAFS results obtained indicated a shortening in the Co-Ti and Ti-Ti average interatomic distances when compared to those found by using the AHS-RDF method and an increase in the Co-Co and Ti-Ti average interatomic distances and a shortening in the Co-Ti one when compared to the interatomic distances found in the bcc- Co₂Ti compound. In spite of these differences, average coordination numbers obtained from EXAFS and AHS-RDF are similar to each other and also to those found in bcc- Co₂Ti.     

Physical investigation of the mechanisms of lithium insertion in sulfides as anode materials for lithium-ion batteries

Electrochemical and chemical lithium insertion (vian-butyllithium) were carried out on a family of spinel phases of the Cu₂S-In₂S₃-SnS₂ system. Electrochemical measurements have revealed great reversible capacities and the possible use of these materials as negative electrodes in lithium-ion batteries.¹¹⁹Sn Mössbauer spectroscopy,⁷Li NMR and S K edge EXAFS spectroscopy were carried out to characterize the mechanisms of lithium insertion. This study has shown the formation of lithium-metal alloys finely dispersed in an amorphous lithium sulfide matrix at low potentials. A model is proposed to explain the great capacities observed in these materials.     

EXAFS and XANES Structure determination of Mn2+ binding in ATP complexes

Summary The binding of Mn²⁺ ions to ATP molecules has been studied by means of the fine-structure analysis of X-ray absorption spectra (EXAFS and XANES) at theK-edge of Mn using the synchrotron, radiation facility PULS in Frascati. The results obtained in both freeze-dried and liquid samples of aqueous solutions at room temperature of the Mn-ATP complex under diffrent values ofpH and Mn:ATP ratio are reported and discussed. The Mn²⁺ ion appears to be octahedrally coordinated, the phosphate oxygen atoms being in the first co-ordination shell. Values of (2.15±0.05) ? and (3.4±0.05) ?, respectively, have been found for Mn-O and Mn-P distances. Theoretical considerations together with experimental results do not support the existence of a direct binding of the Mn to the N(7) atom of the adenine ring. The coordination numbers for the first and second shell are consistent with the formation of a Mn(ATP)₂ complex in solution atpH=9 and Mn: ATP=1:10, while a Mn-ATP 1:1 complex is found at lowerpH and higher Mn: ATP ratios. To speed up publication, the authors of this paper have agreed to not receive the proofs for correction.     

激光辐照非晶Fe73.5Cu1Nb3Si13.5B 9微量晶化的穆斯堡尔谱研究

在激光功率为40—160W、扫描速度为10mm/s、激光光斑为20mm照射条件下,用CO ₂激 光辐照非晶Fe_73.5Cu₁Nb₃Si_13.5B_{9< /sub>产生微量晶化.利用透射穆斯堡尔谱 （TMS）技术分析了原始态和晶化后样品的超精细结构.确定了穆斯堡尔谱的基本参数——化 学位移(IS)、四极分裂(QS)、内磁场(Hhf)随激光功率变化的规律.分析表明，CO2关键词： 激光辐照 微量晶化 73.5Cu1Nb3 Si13.5B9')" href="#">非晶Fe73.5Cu1Nb3 Si13.5B9 穆斯堡尔谱}     

Quasi in situ Ni K‐edge EXAFS investigation of the spent NiMo catalyst from ultra‐deep hydrodesulfurization of gas oil in a commercial plant

Ni species on the spent NiMo catalyst from ultra‐deep hydrodesulfurization of gas oil in a commercial plant were studied by Ni K‐edge EXAFS and TEM measurement without contact of the catalysts with air. The Ni–Mo coordination shell related to the Ni–Mo–S phase was observed in the spent catalyst by quasi in situ Ni K‐edge EXAFS measurement with a newly constructed high‐pressure chamber. The coordination number of this shell was almost identical to that obtained by in situ Ni K‐edge EXAFS measurement of the fresh catalyst sulfided at 1.1 MPa. On the other hand, large agglomerates of Ni₃S₂ were observed only in the spent catalyst by quasi in situ TEM/EDX measurement. MoS₂‐like slabs were sintered slightly on the spent catalyst, where they were destacked to form monolayer slabs. These results suggest that the Ni–Mo–S phase is preserved on the spent catalyst and Ni₃S₂ agglomerates are formed by sintering of Ni₃S₂ species originally present on the fresh catalyst.     

Alternative difference analysis scheme combining R‐space EXAFS fit with global optimization XANES fit for X‐ray transient absorption spectroscopy

Time‐resolved X‐ray absorption spectroscopy (TR‐XAS), based on the laser‐pump/X‐ray‐probe method, is powerful in capturing the change of the geometrical and electronic structure of the absorbing atom upon excitation. TR‐XAS data analysis is generally performed on the laser‐on minus laser‐off difference spectrum. Here, a new analysis scheme is presented for the TR‐XAS difference fitting in both the extended X‐ray absorption fine‐structure (EXAFS) and the X‐ray absorption near‐edge structure (XANES) regions. R‐space EXAFS difference fitting could quickly provide the main quantitative structure change of the first shell. The XANES fitting part introduces a global non‐derivative optimization algorithm and optimizes the local structure change in a flexible way where both the core XAS calculation package and the search method in the fitting shell are changeable. The scheme was applied to the TR‐XAS difference analysis of Fe(phen)₃ spin crossover complex and yielded reliable distance change and excitation population.