Radiative cooling of fullerene anions in a storage ring

Thermionic emission from hot fullerene anions, C_N ^-, has been measured in an electrostatic storage ring for even N values from 36 to 96. The decay is quenched by radiative cooling and hence the observations give information on the intensity of thermal radiation from fullerenes. The experiments are analysed by comparison with a simulation which includes the quantisation of photon energy and the statistics of emission. Experiments with heating of the molecules with a laser beam confirm the interpretation of the observations in terms of radiative cooling and give an independent estimate of the cooling rate for C₆₀ ^-. The measured cooling rates agree in general within a factor of two with the prediction from a classical dielectric model of a thermal radiation intensity of ∼ 300 eV/s for C₆₀ at 1 400 K, scaling approximately with the 6th power of the temperature and with the number of atoms in the molecule. Received 12 March 2001 and Received in final form 12 June 2001     

Spectroscopic manifestations of phase changes in CaAr n clusters: finite size effects

The finite temperature optical spectroscopy of CaAr_n clusters in the range 6 n 146 is investigated using a Diatomics-In-Molecule (DIM) Hamiltonian and classical parallel tempering Monte Carlo simulations. The absorption spectrum is calculated in the vertical approximation at various temperatures between 2 K and 50 K. Several typical situations are reported. CaAr₆ shows a strong thermal broadening and shift of the spectral lines, possibly associated with isomerization. CaAr₁₃ only shows some broadening. CaAr₃₇ exhibits features corresponding to coexisting isomers at low temperature. Finally, the abrupt changes in the absorption spectrum in CaAr₁₄₆ at about 20 K are indicative of surface diffusion.     

Magnetic properties and microstructure of cobalt nanoparticles in a polymer film

Superparamagnetic properties of self-aggregated cobalt nanoparticles in the perfluorinated sulfo-cation membrane (MF-4SK) prepared by ion-exchange method were investigated by transmission electron microscopy (TEM) and superconducting quantum interference device (SQUID) magnetometry at various temperatures. Our experimental results show that cobalt nanoparticles in MF-4SK exhibit superparamagnetic properties above the blocking temperature (T_B), which varies from ∼80 to ∼300 K depending on the cobalt concentration at 100 Oe applied field. The average particle radius of 3.8 nm inferred from Langevin function fit for the concentration of 7.8×10¹⁹ cobalt atoms per 1 g of polymer film is in good agreement with TEM observation. This experimental evidence suggests that cobalt nanoparticles in the polymer film obey a single-domain theory. The results are discussed in the light of current theory for the superparamagnetic behavior of magnetic nanoparticles.     

Synthesis and magnetic properties of Au-coated amorphous Fe20Ni80 nanoparticles

Gold-coated nanoparticles of Fe₂₀Ni₈₀ (permalloy) have been synthesized by a microemulsion process. The as-prepared samples consist of ∼5 nm diameter particles of amorphous Fe₂₀Ni₈₀ that are likely encapsulated in B₂O₃. One or more Fe₂₀Ni₈₀@B₂O₃ particles are subsequently encapsulated in 8-20 nm gold nanospheres, as determined by TEM and X-ray powder diffraction (XRD) line broadening. The gold shells were found to be under expansive strain. Magnetic data confirm the existence of a superparamagnetic phase with a blocking temperature, T_B, of ∼33 K. The saturation magnetization, M_S, of the as-prepared, Au-coated sample is ∼65 emu g⁻¹ at 5 K and ∼16 emu g⁻¹ at 300 K. The coercivity, H_C, is ∼280 Oe at 5 K.     

Observation of multiply charged silver-cluster anions

Singly charged silver-cluster anions are produced in a laser vaporization source and transferred into a Penning trap. After size selection the clusters are subjected to an electron bath in the trap, which results in the attachment of further electrons. The relative abundance of dianions or trianions as a function of the clusters' size is analyzed by time-of-flight mass spectrometry. Silver-cluster dianions are observed for sizes n≥ 24 and trianions for n > 100. In addition, a detailed study of the cluster sizes 24 ?n? 60 shows a pronounced resistance to electron attachment for singly charged anions Ag_n ^- with a closed electronic shell, in particular Ag₂₉ ^-, Ag₃₃ ^-, and Ag₃₉ ^-. Both the threshold size for the observation of dianionic silver clusters and the shell effects in the production yield correlate favorably with previous theoretical investigations of the respective electron affinities. Received 24 November 2000     

Nanocomposites of magnetic cobalt nanoparticles and cellulose

Polymeric matrices with stabilized metallic nanoparticles constitute an important class of nanostructured materials, because polymer technology allows fabrication of components with various electronic, magnetic and mechanical properties. The porous cellulose matrix has been shown to be a useful support material for platinum, palladium, silver, copper and nickel nanoparticles. In the present study, nanosized cobalt particles with enhanced magnetic properties were made by chemical reduction within a microcrystalline cellulose (MCC) matrix. Two different chemical reducers, NaBH₄ and NaH₂PO₂, were used, and the so-formed nanoparticles were characterized with X-ray absorption spectroscopy, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. These experimental techniques were used to gain insight into the effect of different synthesis routes on structural properties of the nanoparticles. Magnetic properties of the nanoparticles were studied using a vibrating sample magnetometer. Particles made via the NaBH₄ reduction were amorphous Co-B or Co oxide composites with diminished ferromagnetic behaviour and particles made via the NaH₂PO₂ reduction were well-ordered ferromagnetic hcp cobalt nanocrystals.     

Microfabrication and magnetoelectric properties of amorphous magnetic-tunnel-junctions with Co–Fe–B/Al–O/Co–Fe–B hardcore structure

Both single-barrier magnetic tunnel junctions (SBMTJs) and double-barrier magnetic tunnel junctions (DBMTJs) with an amorphous hardcore structure of Co₆₀Fe₂₀B₂₀/Al–O/Co₆₀Fe₂₀B₂₀ were microfabricated. A high TMR ratio of 102.2% at 4.2 K was observed in the SBMTJs after annealing at 265 °C for 1 h. High TMR ratio of 56.2%, low junction resistance-area product RS of 4.6 kΩ μm², small coercivity H_C=25 Oe, and relatively large bias-voltage-at-half-maximum TMR with the value V_1/2 greater than 500 mV at room temperature (RT) had been achieved in such Co–Fe–B SBMTJs. Whereas, high TMR ratio of 60% at RT and 89% at 30 K, low junction resistance-area product RS of 7.8 kΩ μm² at RT and 8.3 kΩ μm² at 30 K, low coercivity H_C=8.5 Oe at RT and H_C=14 Oe at 30 K, and relatively large bias-voltage-at-half-maximum TMR with the value V_1/2 greater than 1150 mV at RT had been achieved in the Co–Fe–B DBMTJs. Temperature dependence of the TMR ratio, resistance, and coercivity from 4.2 K to RT, and applied voltage dependence of the TMR ratio and resistance at RT for such amorphous MTJs were also investigated.     

Homogeneous and heterogeneous clustering in the accretion regime

Condensation of nano-droplets in a supersaturating vapor decomposes in two steps: the formation of a nucleation center, also called critical nuclei or nucleation seed, and the growth sequence, by accretion of further atoms on the nucleation center. These two steps have been investigated separately through the clustering of homogeneous particles Na_n and heterogeneous particles Na_nX in a helium buffer gas (X = (Na₂O)₂ or (NaOH)₂). The growth sequence is analyzed with preformed molecules X injected in a supersaturating sodium vapor and driving production of Na_nX clusters. Cluster distribution mean sizes are controlled by sodium concentration and by the condensation cell effective length. The signal intensities observed for homogeneous and heterogeneous clusters are proportional to the homogeneous and heterogeneous nucleation center numbers respectively. We can measure the efficiency for the homogeneous nucleation center production versus sodium concentration. This process is the onset of the condensation phase transition.     

Structural and magnetic properties of Co-C composite films and Co/C multilayer films

CoC composite films and Co/C multilayer films have been prepared by a method incorporating ion beam sputtering and plasma chemical vapor deposition. It has been found that the structure and magnetic properties of both the Co-C composite and the Co/C multilayer films depend strongly on the substrate temperature during deposition. The Co-C composite film deposited at room temperature is amorphous, with relatively low saturation magnetization and coercivity. On the other hand, the film deposited at 250 °C is composed of fine Co crystallites separated by amorphous C or Co-C phase. As a result, both the saturation magnetization and coercivity are increased compared with the film deposited at room temperature. When deposited at room temperature, the Co/C multilayer film exhibits good periodicity, with a period of 70 nm (Co: 40 nm, C: 30 nm) and sharp and flat Co-C interfaces. High magnetization (602 emu/cm³) and low coercivity (1.6 Oe) are obtained for such a film. However, increasing the substrate temperature to 250 °C was found to be detrimental to the magnetic properties due to the formation of cobalt carbide at the Co-C interface. Received: 11 July 2000 / Accepted: 13 July 2000 / Published online: 30 November 2000     

Nanoplasma dynamics in Xe clusters driven by ultraintense laser fields

We present a theoretical and computational study of the properties and the response of the nanoplasma and of outer ionization in Xe_n clusters (n = 55–2171, initial cluster radius R₀ = 8.7–31.0 ?) driven by ultraintense near-infrared laser fields (peak intensity I_M = 10¹⁵–10²⁰ Wcm^-2, temporal pulse length τ= 10–100 fs, and frequency ν= 0.35 fs^-1). The positively charged high-energy nanoplasma produced by inner ionization nearly follows the oscillations of the fs laser pulse and can either be persistent (at lower intensities of I_M = 10¹⁵–10¹⁶ Wcm^-2 and/or for larger cluster sizes, where the electron energy distribution is nearly thermal) or transient (at higher intensities of I_M = 10¹⁸–10²⁰ Wcm^-2 and/or for smaller cluster sizes). The nanoplasma is depleted by outer ionization that was semiquantitatively described by the cluster barrier suppression electrostatic model, which accounts for the cluster size, laser intensity and pulse length dependence of the outer ionization yield. The electrostatic model was further utilized for estimates of the laser intensity and pulse width dependence of the border radius R₀ ^(I) for the attainment of complete outer ionization at , while at R₀ > R₀ ^(I) a persistent nanoplasma prevails. R₀ ^(I) establishes an interrelationship between electron dynamics and nuclear Coulomb explosion dynamics in ultraintense laser-cluster interactions.     

Photoinduced dissociation reactions of silver fluoride cluster ions

Photoinduced dissociation in the ultraviolet region has been investigated for Ag _nF _n-1 ⁺ cluster ions. Photodissociation spectrum of Ag₂F⁺ in the energy of 3.8–5.6 eV exhibits several sharp bands corresponding to the transition to electronically excited states. In this dissociation, only the Ag₂ ⁺ ion was observed as a fragment ion. Theoretical calculation indicates that the parent Ag₂F⁺ ion has a linear Ag-F-Ag equilibrium geometries in the ground and excited states. Since conformational changes by excitation of bending vibration are necessary for the fragmentation of an F atom, this indicates that production of Ag₂ ⁺ from Ag₂F⁺ is a result of internal conversion and following conformational changes.     

Electronic and geometric structure of doped rare-gas clusters: surface, site and size effects studied with luminescence spectroscopy

The electronic and geometric structure of rare gas clusters doped with rare-gas atoms Rg = Xe, Kr or Ar is investigated with fluorescence excitation spectroscopy in the VUV spectral range. Several absorption bands are observed in the region of the first electronic excitations of the impurity atoms, which are related to the lowest spin-orbit split atomic ³P₁ and ¹P₁ states. Due to influence of surrounding atoms of the cluster, the atomic lines are shifted to the blue and broadened (“electronical cage effect”). From the known interaction potentials and the measured spectral shifts the coordination of the impurity atom in Ar_N, Kr_N, Ne_N and He_N could be studied in great detail. In the interior of Kr_N and Ar_N the Xe atoms are located in substitutional sites with 12 nearest neighbours and internuclear distances comparable to that of the host matrix. In Ne_N and He_N the cluster atoms (18 and 22, respectively) arrange themselves around the Xe impurity with a bondlength comparable to that of the heteronuclear dimer. The results confirm that He clusters are liquid while Ne clusters are solid for N≥ 300. Smaller Ne clusters exhibit a liquid like behaviour. When doping is strong, small Rg_m-clusters (Rg = Xe, Kr, Ar, m≤10 ²) are formed in the interior sites of the host cluster made of Ne or He. Specific electronically excited states, assigned to interface excitons are observed. Their absorption bands appear and shift towards lower energy when the cluster size m increases, according to the Frenkel exciton model. The characteristic bulk excitons appear in the spectra, only when the cluster radius exceeds the penetration depth of the interface exciton, which can be considerably larger than that in free Rg_m clusters. This effect is sensitive to electron affinities of the guest and the host cluster.     

Preparation and characterizations of SiO2-coated nanoparticles of Mn0.4Zn0.6Fe2O4

Core/shell nanoparticles consisting of a magnetic core of zinc-substituted manganese ferrite (Mn_0.4Zn_0.6Fe₂O₄) and a shell of silica (SiO₂) are prepared by a sol-gel method using tetraethyl orthosilicate (TEOS) as a precursor material for silica and salts of iron, manganese and zinc as the precursor of the ferrite. Three weight percentages of the shell materials of SiO₂ are used to prepare the coated nanoparticles. The X-ray diffractograms (XRD) of the coated and uncoated magnetic nanoparticles confirmed that the magnetic nanoparticles are in their mixed spinel phase in an amorphous matrix of silica. Particles sizes of the samples annealed at different temperatures are estimated from the width of the (3 1 1) line of the XRD pattern using the Debye-Sherrer equation. The information regarding the crystallographic structure together with the particles sizes extracted from the high-resolution transmission electron microscopy (HRTEM) of a few selected samples are in agreement with those obtained from the XRD. HRTEM observations revealed that particles are coated with silica. The calculated thickness is in agreement with that obtained from the HRTEM pictures. Hysteresis loops observed in the temperature range 300 down to 5 K and Mössbauer spectra at room temperature indicate superparamagnetic relaxation of the nanoparticles.     

Ferromagnetic properties of glucose coated Cu2O nanoparticles

Magnetic properties of glucose coated cuprous oxide nanoparticles of different sizes have been studied. Unlike bulk Cu₂O, which shows diamagnetic behavior, the nanoparticles show superparamagnetic behavior. A superparamagnetic blocking temperature of 21 K is observed for 5 nm particles. A magnetic hysteresis loop with a coercivity of 406 Oe is observed for these particles at 5 K. The magnetization and the coercivity increase with decreasing particle size. The superparamagnetic behavior, along with the increase in magnetization and coercivity with decreasing particle size, is due to the enhanced surface contributions to the magnetism.     

Magnetic properties of DNA-templated Co/Cu naonoparticle chains

<正>According to ultraviolet(UV)-vis absorption spectra recorded in the DNA metallization process,DNA-templated Co/Cu binary nanoparticle chains are fabricated by incubating genome DNA of paralichthys olivaceus muscle in CoCl_2 and CuCl_2 mixture solution for 20 hours and reducing the complex for 2 hours.Transmission electron microscopy observation indicates that Co and Cu nanoparticles with 20 nm in diameter were randomly dispersed on the DNA template. The superconducting quantum interference device(SQUID) measurements display that the magnetic interaction between cobalt particles is greatly decreased by the copper particle.With increasing copper content,the coercivity of the systems enhance from 9 Oe to 100 Oe(1 Oe=79.5775 A/m).     

Interparticle interaction effects on magnetic behaviors of hematite (α-Fe2O3) nanoparticles

The interparticle magnetic interactions of hematite (α-Fe₂O₃) nanoparticles were investigated by temperature and magnetic field dependent magnetization curves. The synthesis were done in two steps; milling metallic iron (Fe) powders in pure water (H₂O), known as mechanical milling technique, and annealing at 600 °C. The crystal and molecular structure of prepared samples were determined by X-ray powder diffraction (XRD) spectra and Fourier transform infrared (FTIR) spectra results. The average particle sizes and the size distributions were figured out using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The magnetic behaviors of α-Fe₂O₃ nanoparticles were analyzed with a vibrating sample magnetometer (VSM). As a result of the analysis, it was observed that the prepared α-Fe₂O₃ nanoparticles did not perform a sharp Morin transition (the characteristic transition of α-Fe₂O₃) due to lack of unique particle size distribution. However, the transition can be observed in the wide temperature range as “a continuously transition”. Additionally, the effect of interparticle interaction on magnetic behavior was determined from the magnetization versus applied field (σ(M)) curves for 26±2 nm particles, dispersed in sodium oxalate matrix under ratios of 200:1, 300:1, 500:1 and 1000:1. The interparticle interaction fields, recorded at 5 K to avoid the thermal interactions, were found as ∼1082 Oe for 26±2 nm particles.     

Structural and magnetic properties of <Emphasis Type="Italic">L</Emphasis>1<Subscript>0</Subscript>–FeCoPt nanoparticles prepared by rf-sputtering

L1₀ ordered Fe–Co–Pt magnetic nanoparticles were fabricated using radio frequency sputtering at 613 K on single-crystalline NaCl and MgO substrates. The growth of particles was studied by varying the sputtering gas pressure and sputtering duration. High-resolution electron microscopy and electron diffraction studies revealed a formation of particles with L1₀-related variant domains. The structure and magnetic studies showed the preferential in-plane formation of the magnetic easy axis. The coercivity of the films increased with annealing at 773 K. The Co addition to the FePt alloy increased the saturation magnetization to 1300 emu/cm³.     

C 1s core photoemission of C60 and C48N12

We make a theoretical study of the shake-up of the 1s photoemission of C₆₀. The method takes into account the N-body reactions of the π and σ electrons which appear during the formation of the photoemission hole on one carbon atom. We analyze the origin of the satellite in the spectra due to transitions between N-body states. Our calculation shows that the satellite spectra is essentially given by N-body transitions which involve the creation of one or two electron-hole pairs. The method has been applied also to C₄₈N₁₂. The situation is more complex. The spectra of the two most stable species have been investigated. Moreover the influence on the spectra of the position of the hole created on the carbon atom in C₄₈N₁₂ has been examined (all the carbon positions are not equivalent for some isomers).     

Particle size effect on phase and magnetic properties of polymer-coated magnetic nanoparticles

Polymer-coated magnetic nanoparticles are hi-tech materials with ample applications in the field of biomedicine for the treatment of cancer and targeted drug delivery. In this study, magnetic nanoparticles were synthesized by chemical reduction of FeCl₂ solution with sodium borohydride and coated with amine-terminated polyethylene glycol (aPEG). By varying the concentration of the reactants, the particle size and the crystallinity of the particles were varied. The particle size was found to increase from 6 to 20 nm and the structure becomes amorphous-like with increase in the molar concentration of the reactant. The magnetization at 1 T field (M_1T) for all samples is > 45 emu/g while the coercivity is in the range of 100-350 Oe. When the ethanol-suspended particles are subjected to an alternating magnetic field of 4 Oe at 500 kHz, the temperature is increased to a maximum normalized temperature (3.8 °C/mg) with decreasing particle size.     

Photodissociation spectroscopy of the chromium trimer ion

The electronic and geometric structures and photodissociation dynamics of the chromium trimer ion, Cr₃ ⁺, were investigated by photodissociation spectroscopy in the photon-energy range from 1.32 to 5.52 eV. The branching fractions of the product ions, Cr⁺ and Cr₂ ⁺, exhibit stepwise changes at the threshold energies for dissociation into Cr⁺+Cr₂, Cr+Cr₂ ⁺, Cr⁺+2Cr, and Cr^*+Cr₂ ⁺. It is noted that Cr₂ ⁺ is produced even above the threshold for atomization; the excess energy is redistributed to produce a fragment atom, Cr^*, in an excited state. The photodissociation action spectrum is well explained by a mixture of simulated spectra for two nearly-degenerate structural isomers identified by density functional calculations: those having a metastable C_2v structure and the most stable structure slightly distorted from the C_2v one. The barrier height between the two isomers which is lower than the zero-point energy suggests that Cr₃ ⁺ has an intrinsically floppy structure.