首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The two-dimensional, steady, laminar, forced and free convective boundary layer flow of a magnetic fluid over a semi-infinite vertical plate, under the action of a localized magnetic field, is numerically studied. The magnetic fluid is considered to be water-based with temperature dependent viscosity and thermal conductivity. The study of the boundary layer is separated into two cases. In case I the boundary layer is studied near the leading edge, where it is dominated by the large viscous forces, whereas in case II the boundary layer is studied far from the leading edge of the plate where the effects of buoyancy forces increase. The numerical solution, for these two different cases, is obtained by an efficient numerical technique based on the common finite difference method. Numerical calculations are carried out for the value of Prandl number Pr =  49.832 (water-based magnetic fluid) and for different values of the dimensionless parameters entering into the problem and especially for the magnetic parameter Mn, the viscosity/temperature parameter Θ r and the thermal/conductivity parameter S*. The analysis of the obtained results show that the flow field is influenced by the application of the magnetic field as well as by the variation of the viscosity and the thermal conductivity of the fluid with temperature. It is hoped that they could be interesting for engineering applications.  相似文献   

2.
The fully developed electrically conducting micropolar fluid flow and heat transfer along a semi-infinite vertical porous moving plate is studied including the effect of viscous heating and in the presence of a magnetic field applied transversely to the direction of the flow. The Darcy-Brinkman-Forchheimer model which includes the effects of boundary and inertia forces is employed. The differential equations governing the problem have been transformed by a similarity transformation into a system of non-dimensional differential equations which are solved numerically by element free Galerkin method. Profiles for velocity, microrotation and temperature are presented for a wide range of plate velocity, viscosity ratio, Darcy number, Forchhimer number, magnetic field parameter, heat absorption parameter and the micropolar parameter. The skin friction and Nusselt numbers at the plates are also shown graphically. The present problem has significant applications in chemical engineering, materials processing, solar porous wafer absorber systems and metallurgy.  相似文献   

3.
An analysis has been carried out to study the momentum and heat transfer characteristics in an incompressible electrically conducting non-Newtonian boundary layer flow of a viscoelastic fluid over a stretching sheet. The partial differential equations governing the flow and heat transfer characteristics are converted into highly non-linear coupled ordinary differential equations by similarity transformations. The effect of variable fluid viscosity, Magnetic parameter, Prandtl number, variable thermal conductivity, heat source/sink parameter and thermal radiation parameter are analyzed for velocity, temperature fields, and wall temperature gradient. The resultant coupled highly non-linear ordinary differential equations are solved numerically by employing a shooting technique with fourth order Runge–Kutta integration scheme. The fluid viscosity and thermal conductivity, respectively, assumed to vary as an inverse and linear function of temperature. The analysis reveals that the wall temperature profile decreases significantly due to increase in magnetic field parameter. Further, it is noticed that the skin friction of the sheet decreases due to increase in the Magnetic parameter of the flow characteristics.  相似文献   

4.
A numerical model is developed to study magnetohydrodynamics (MHD) mixed convection from a heated vertical plate embedded in a Newtonian fluid saturated sparsely packed porous medium by considering the variation of permeability, porosity and thermal conductivity. The boundary layer flow in the porous medium is governed by Forchheimer–Brinkman extended Darcy model. The conservation equations that govern the problem are reduced to a system of non-linear ordinary differential equations by using similarity transformations. Because of non-linearity, the governing equations are solved numerically. The effects of magnetic field on velocity and temperature distributions are studied in detail by considering uniform permeability (UP) and variable permeability (VP) of the porous medium and the results are discussed graphically. Besides, skin friction and Nusselt number are also computed for various physical parameters governing the problem under consideration. It is found that the inertial parameter has a significant influence in increasing the flow field and the rate of heat transfer for variable permeability case. The important finding of the present work is that the magnetic field has considerable effects on the boundary layer velocity and on the rate of heat transfer for variable permeability of the porous medium. Further, the results obtained under the limiting conditions were found to be in good agreement with the existing ones.  相似文献   

5.
A similarity analysis was performed to investigate the laminar free-convection boundary-layer flow in the presence of a transverse magnetic field over a vertical down-pointing cone with mixed thermal boundary conditions. Boundary layer velocity and temperature profiles were determined numerically for various values of the magnetic parameter and the Prandtl number. The results show that the magnetic field suppresses the velocity profiles and increases the skin friction. The temperature profiles were expanded with increasing values of the magnetic parameter resulting in higher surface temperatures. A transformation relating the similarity solutions of the boundary-layer velocity and temperature profiles associated with different values of the mixed thermal boundary condition parameter was obtained.  相似文献   

6.
The group theoretic method is applied for solving problem of combined magneto-hydrodynamic heat and mass transfer of non-Darcy natural convection about an impermeable horizontal cylinder in a non-Newtonian power law fluid embedded in porous medium under coupled thermal and mass diffusion, inertia resistance, magnetic field, thermal radiation effects. The application of one-parameter groups reduces the number of independent variables by one and consequently, the system of governing partial differential equations with the boundary conditions reduces to a system of ordinary differential equations with appropriate boundary conditions. The ordinary differential equations are solved numerically for the velocity using shooting method. The effects of magnetic parameter M, Ergun number Er, power law (viscosity) index n, buoyancy ratio N, radiation parameter Rd, Prandtl number Pr and Lewis number Le on the velocity, temperature fields within the boundary layer, heat and mass transfer are presented graphically and discussed.  相似文献   

7.
In the present paper the unsteady Couette flow and heat transfer of a dusty conducting fluid between two parallel plates with temperature dependent viscosity and thermal conductivity are studied. The fluid is acted upon by an exponential decaying pressure gradient and an external uniform magnetic field is applied. The governing coupled momentum and energy equations are solved numerically using finite differences. The effect of the variable viscosity and thermal conductivity of the fluid and the uniform magnetic field on the velocity and temperature fields for both the fluid and dust particles is discussed.  相似文献   

8.
In this paper, we are concerned with the motion of electrically conducting fluid governed by the two-dimensional non-isentropic viscous compressible MHD system on the half plane with no-slip condition on the velocity field, perfectly conducting wall condition on the magnetic field and Dirichlet boundary condition on the temperature on the boundary. When the viscosity, heat conductivity and magnetic diffusivity coefficients tend to zero in the same rate, there is a boundary layer which is described by a Prandtl-type system. Under the non-degeneracy condition on the tangential magnetic field instead of monotonicity of velocity, by applying a coordinate transformation in terms of the stream function of magnetic field as motivated by the recent work [27], we obtain the local-in-time well-posedness of the boundary layer system in weighted Sobolev spaces.  相似文献   

9.
An analytical study for the problem of unsteady mixed convection with thermal radiation and first-order chemical reaction on magnetohydrodynamics boundary layer flow of viscous, electrically conducting fluid past a vertical permeable plate has been presented. Slip boundary condition is applied at the porous interface. The classical model is used for studying the effect of radiation for optically thin media. The non-linear coupled partial differential equations are solved by perturbation technique. The results obtained show that the velocity, temperature and concentration fields are appreciably influenced by the presence of chemical reaction, thermal stratification and magnetic field. It is observed that the effect of thermal radiation and magnetic field decreases the velocity, temperature and concentration profiles in the boundary layer. Also, the effects of the various parameters on the skin-friction coefficient and the rate of heat transfer at the surface are discussed.  相似文献   

10.
We consider a laminar boundary‐layer flow of a viscous and incompressible fluid past a moving wedge in which the wedge is moving either in the direction of the mainstream flow or opposite to it. The mainstream flows outside the boundary layer are approximated by a power of the distance from the leading boundary layer. The variable pressure gradient is imposed on the boundary layer so that the system admits similarity solutions. The model is described using 3‐dimensional boundary‐layer equations that contains 2 physical parameters: pressure gradient (β) and shear‐to‐strain‐rate ratio parameter (α). Two methods are used: a linear asymptotic analysis in the neighborhood of the edge of the boundary layer and the Keller‐box numerical method for the full nonlinear system. The results show that the flow field is divided into near‐field region (mainly dominated by viscous forces) and far‐field region (mainstream flows); the velocity profiles form through an interaction between 2 regions. Also, all simulations show that the subsequent dynamics involving overshoot and undershoot of the solutions for varying parameter characterizing 3‐dimensional flows. The pressure gradient (favorable) has a tendency of decreasing the boundary‐layer thickness in which the velocity profiles are benign. The wall shear stresses increase unboundedly for increasing α when the wedge is moving in the x‐direction, while the case is different when it is moving in the y‐direction. Further, both analysis show that 3‐dimensional boundary‐layer solutions exist in the range −1<α<. These are some interesting results linked to an important class of boundary‐layer flows.  相似文献   

11.
This paper presents a mathematical analysis of MHD flow and heat transfer to a laminar liquid film from a horizontal stretching surface. The flow of a thin fluid film and subsequent heat transfer from the stretching surface is investigated with the aid of similarity transformation. The transformation enables to reduce the unsteady boundary layer equations to a system of non-linear ordinary differential equations. Numerical solution of resulting non-linear differential equations is found by using efficient shooting technique. Boundary layer thickness is explored numerically for some typical values of the unsteadiness parameter S and Prandtl number Pr, Eckert number Ec and Magnetic parameter Mn. Present analysis shows that the combined effect of magnetic field and viscous dissipation is to enhance the thermal boundary layer thickness.  相似文献   

12.
The present work examines the combined influence of variable thermal conductivity and viscosity on the irreversibility rate in couple stress fluid flow in between asymmetrically heated parallel plates. The dimensionless fluid equations are solved by using homotopy analysis method (HAM) and validated with Runge‐Kutta shooting method (RKSM). The convergent series solution is then used for the irreversibility analysis in the flow domain. The effects of thermal conductivity and viscosity variation parameters, couple stress parameter, Reynolds number, Grashof number, Hartmann number on the velocity profile, temperature distribution, entropy production, and heat irreversibility ratio are presented through graphs, and salient features of the solutions are discussed. The computations show that the entropy production rate decreases with increased magnetic field and thermal conductivity parameters, whereas it rises with increasing values of couple stress parameter, Brinkman number, viscosity variation parameter, and Grashof number. The study is relevant to lubrication theory.  相似文献   

13.
研究不可压缩粘性导电流体,流过半无限竖直可渗透平板时,将其偏微分形式的流动和传热的基本控制方程,应用适当的相似变换,简化为非线性的常微分方程组.对两种抽吸参数:大的和小的抽吸参数,采用摄动法得到变换后方程的近似解.数值结果表明,随着磁场参数和抽吸参数的增大,任意点的速度场在减小;磁场参数的影响,引起热边界层厚度的增大;速度和温度场随着热汇参数的增大而减小.  相似文献   

14.
The non axisymmetric motion produced by a buoyancy-induced secondary flow of a viscoelastic fluid over an infinite rotating disk in a verticalplane with a magnetic field applied normal to the disk has been studied.The governing Navier Stokes equations and the energy equation admit a self similar solution. The system of ordinary differential equations has been solved numerically using Runge-Kutta Gill subroutine.The turning moment for the viscoelastic fluid is found to be less than that of the Newtonian fluid but the turning moment is increased due to the magnetic parameter. The resultant force due to the buoyancy-induced secondary flow increases with the magnetic parameter but reduces as the viscoelastic parameter increases. The quantity of fluid, which is pumped outwards due to the centrifuging action of the disk, for the viscoelastic fluid is more than that of the Newtonian fluid. The buoyancy-induced secondary flow boundary layer is much thicker than the primary boundary layer thickness. The thermal boundary layer due to the primary flow increases with the magnetic parameter decreases as the viscoelastic parameter increases. The heat transfer increases with the viscoelastic parameter but decreases as the magnetic parameter increases. The effect of the viscoelastic parameter is more pronounced on the secondary flow than on the primary flow.  相似文献   

15.
This present study consists of a numerical investigation of transient heat transfer in channel flow of an electrically conducting variable viscosity Boussinesq fluid in the presence of a magnetic field and thermal radiation. The temperature dependent nature of viscosity is assumed to follow an exponentially model and the system exchanges heat with the ambient following Newton’s law of cooling. The governing nonlinear equations of momentum and energy transport are solved numerically using a semi-implicit finite difference method. Solutions are presented in graphical form and given in terms of fluid velocity, fluid temperature, skin friction and heat transfer rate for various parametric values. Our results reveal that combined effect of thermal radiation, magnetic field, viscosity variation and convective cooling have significant impact in controlling the rate of heat transfer in the boundary layer region.  相似文献   

16.
In this paper the boundary layer flow over a flat plat with slip flow and constant heat flux surface condition is studied. Because the plate surface temperature varies along the x direction, the momentum and energy equations are coupled due to the presence of the temperature gradient along the plate surface. This coupling, which is due to the presence of the thermal jump term in Maxwell slip condition, renders the momentum and energy equations non-similar. As a preliminary study, this paper ignores this coupling due to thermal jump condition so that the self-similar nature of the equations is preserved. Even this fundamental problem for the case of a constant heat flux boundary condition has remained unexplored in the literature. It was therefore chosen for study in this paper. For the hydrodynamic boundary layer, velocity and shear stress distributions are presented for a range of values of the parameter characterizing the slip flow. This slip parameter is a function of the local Reynolds number, the local Knudsen number, and the tangential momentum accommodation coefficient representing the fraction of the molecules reflected diffusively at the surface. As the slip parameter increases, the slip velocity increases and the wall shear stress decreases. These results confirm the conclusions reached in other recent studies. The energy equation is solved to determine the temperature distribution in the thermal boundary layer for a range of values for both the slip parameter as well as the fluid Prandtl number. The increase in Prandtl number and/or the slip parameter reduces the dimensionless surface temperature. The actual surface temperature at any location of x is a function of the local Knudsen number, the local Reynolds number, the momentum accommodation coefficient, Prandtl number, other flow properties, and the applied heat flux.  相似文献   

17.
The problem of steady laminar magnetohydrodynamic (MHD) mixed convection heat transfer about a vertical plate is studied numerically, taking into account the effects of Ohmic heating and viscous dissipation. A uniform magnetic field is applied perpendicular to the plate. The resulting governing equations are transformed into the non-similar boundary layer equations and solved using the Keller box method. Both the aiding-buoyancy mode and the opposing-buoyancy mode of the mixed convection are examined. The velocity and temperature profiles as well as the local skin friction and local heat transfer parameters are determined for different values of the governing parameters, mainly the magnetic parameter, the Richardson number, the Eckert number and the suction/injection parameter, fw. For some specific values of the governing parameters, the results agree very well with those available in the literature. Generally, it is determined that the local skin friction coefficient and the local heat transfer coefficient increase owing to suction of fluid, increasing the Richardson number, Ri (i.e. the mixed convection parameter) or decreasing the Eckert number. This trend reverses for blowing of fluid and decreasing the Richardson number or decreasing the Eckert number. It is disclosed that the value of Ri determines the effect of the magnetic parameter on the momentum and heat transfer.  相似文献   

18.
Certain solutions of Magnetohydrodynamic boundary layer equations for a flat plate with a transverse magnetic field fixed relative to the fluid have been obtained using a power-series method given by Hassan. This power series solution has all the desirable qualities of Görtler series and, in addition, its zeroth order term which is governed by a non-linear total differential equation can be given in closed form. The first order term governed by a linear total differential equation has been integrated numerically. The results are tabulated for various values of S, the interaction parameter. The results show a decrease in the boundary layer thickness with a consequent increase in skin friction as the strength of magnetic field is increased.  相似文献   

19.
This paper deals with the theoretical investigation of the effect of magnetic field dependent (MFD) viscosity on the thermal convection in a ferromagnetic fluid in the presence of dust particles. For a flat ferromagnetic fluid layer contained between two free boundaries, the exact solution is obtained using a linear stability analysis and a normal mode analysis method. For the case of stationary convection, dust particles always have a destabilizing effect, whereas the MFD viscosity has a stabilizing effect on the onset of convection. In the absence of MFD viscosity, the destabilizing effect of magnetization is depicted but in the presence of MFD viscosity, non-buoyancy magnetization may have a destabilizing or a stabilizing effect on the onset of convection. The critical wave number and critical magnetic thermal Rayleigh number for the onset of stationary convection are also determined numerically for sufficiently large values of buoyancy magnetization parameter M 1. Graphs have been plotted by giving numerical values to the parameters to depict the stability characteristics. It is observed that the critical magnetic thermal Rayleigh number is reduced solely because the heat capacity of clean fluid is supplemented by that of the dust particles. The principle of exchange of stabilities is found to hold true for the ferromagnetic fluid heated from below in the absence of dust particles. The oscillatory modes are introduced due to the presence of the dust particles, which were non-existent in their absence. A sufficient condition for the non-existence of overstability is also obtained.  相似文献   

20.
The influence of temperature dependent viscosity and thermal conductivity on the transient Couette flow with heat transfer is studied. An external uniform magnetic field is applied perpendicular to the parallel plates and the Hall effect is taken into consideration. The fluid is acted upon by a constant pressure gradient. The two plates are kept at two constant but different temperatures and the viscous and Joule dissipations are considered in the energy equation. A numerical solution for the governing non-linear equations of motion and the energy equation is obtained. The effect of the Hall term and the temperature dependent viscosity and thermal conductivity on both the velocity and temperature distributions is examined.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号