硼酰化钴中硼的快速测定

硼酰化钴中硼的测定采用EDTA作为钴的络合掩蔽剂,消除了钴对测定硼的影响。同时改用溴甲酚绿-甲基红-酚酞三元混合指示剂作为测定硼的指示剂,使滴定终点灵敏、准确。建立了一种测定硼酰化钴中硼含量的简便、快速的分析方法。     

协同催化荧光法测定痕量钴的研究

基于在硼酸 硼砂介质中,钴和三乙醇胺协同催化过氧化氢氧化还原型罗丹明6G的反应,建立了协同催化荧光法测定痕量钴的新方法。钴的检出限为0.011ng/mL;测定范围0.016～0.80ng/mL。方法已用于小麦粉,玉米粉,VB12和人尿液等样品中痕量钴的测定。     

石墨炉原子吸收光度法测定果品中微量钴

钴是人体必需的微量元素之一,是构成维生素B_(12)的主要成分,钴对铁的代谢,血红蛋白的合成均具有重要的生理功能。已报道了吸光光度法测定茶叶中钴,石墨炉原子吸收光度法测定人发中钴,但对果品中钴的测定报道甚少。本文提出用石墨炉原子吸收光度法测定果品中的微量钴,并研究了试验条件。该法灵敏度高,重现性良好,回收率为95％～99％,检出限可达0.5μg·L~(-1),常见的元素均不干扰测定,对果品中钴的测定可得到满意的结果。 1 试验部分 1.1 仪器与试剂 日立Z-8000型偏振塞曼原子吸收分光光度计 日立热解石墨管;钴空心阴极灯 钴标准贮备液:1.0mg·ml~(-1),测定时所用稀溶液均由此贮备液配制而得。     

一个新的催化光度测定痕量钴的指示反应

本文研究了钴对过氧化氢与对氨基二乙基苯胺硫酸盐的氧化还原反应的催化作用,并用以测定痕量钴(Ⅱ),其测定下限可达10~(-12)克/毫升量级,测定范围为0—0.16微克钴(Ⅱ)50毫升。拟定了一个新的催化动力学测定钴(Ⅱ)的分析方法。方法块速、简便。测定的变异系数为1.31—2.70%。     

2-(2-喹啉偶氮)-1,5-苯二酚光度法测定钴的研究

钴是人体生命活动不可缺少的重要元素 ,痕量钴的测定具有重要意义。吡啶偶氮类试剂、苯并噻唑偶氮类试剂和 8-氨基喹啉类试剂用于钴的测定已有不少报道 ,但是用 2 -氨基衍生物作钴的显色剂的研究报道较少。我们合成了新试剂 2 - ( 2 -喹啉偶氮 ) - 1 ,5 -苯二酚 ( QADHB) ,并研究了其和钴的显色反应 ,方法用于维生素 B12 针剂及烟草样品中钴含量的测定 ,结果满意     

火焰原子吸收光谱法测定羰基钴催化剂中高含量钴

建立了火焰原子吸收光谱法测定羰基钴催化剂中高含量钴的方法,考察了20种共存离子的干扰情况,钴的最灵敏吸收线波长为240.7nm。用空气-乙炔火焰测定高浓度钴时,用波长为352.7nm的次灵敏线,可提高测定的精密度,又能使工作曲线的线性范围变宽。钴量在0～70ug/mL范围内符合比尔定律,此方法测定钴的最低检测限为0.16ug/mL,加标回收率在97.9％～100.7％之间,相对标准偏差小于2.2％。     

催化光度法测定人发中超痕量钴的研究

本文研究了氨水介质中钴(Ⅱ)催化过氧化氢氧化邻苯二酚紫褪色反应及其动力学条件,建立了测定超痕量钴(Ⅱ)的快速方法。测定钴(Ⅱ)的范围为0～40×1/25 ng/mL,方法灵敏度为1.2×10~(-12)g/mL,用以测定人发中的痕量钴(Ⅱ),获得了满意结果。     

痕量钴的分析

综述了近年来测定痕量钴的进展状况,展望了测定痕量钴的要求及发展方向,包括光度法,色谱法及质谱法。     

催化褪色光度法测定痕量钴的研究—Co（Ⅱ）—氯磺酚S—H2O2体系

本文研究了在pH4.0—5.0的缓冲溶液中钴(Ⅱ)催化过氧化氢氧化氯磺酚S的褪色反应及其动力学条件,建立了测定痕量钴的新方法,测定钴的范围为0—0.06μg/25mL,其检出限为6.45×10~(-12)gCo/mL,用于测定中药材中的痕量钴,获得满意结果。     

二溴对甲偶氮羧光度法测定维生素B_(12)中钴量

钴是具有生物活性的微量元素,在动物营养中占有相当重要的位置。随着生物科学的发展,研究简便、快速、准确地测定钴的分析方法十分必要。钴的测定方法有分光光度法、原子吸收光谱法、络合滴定法等。二溴对甲偶氮羧已用于测定新型除氧剂中钡,尚未见其应用于钴测定的报道。本工作将其用于维生素B_(12)中钴的测定,试验发现     

SMAI法制备的Co/SiO2催化剂及La3+促进Co/SiO2催化剂的比较

实验证明,钴基催化剂是非常有效的F-T合成催化剂. 由于钴基催化剂对形成长链烷烃具有高活性和高选择性,故它尤其适用于天然气间接转换为液态燃料和蜡的过程[1～5]. F-T合成用钴基催化剂由四个主要成分组成: 主金属(Co)、第二过渡金属、氧化物助剂(碱金属、稀土金属或过渡金属氧化物)及大比表面积氧化物载体(氧化硅或氧化铝)[5]. La对钴基催化剂的促进效果因其被加入到催化剂前体中的方式和顺序以及载体的性质和金属钴的状态等参数的变化而有所不同. 为了评价La对Co/SiO2催化CO加氢作用的促进效果,本文对溶剂化金属原子浸渍法(SMAI)制备的Co/SiO2和Co/La-SiO2进行了对比研究. 在保持某些参数(如载体的性质和金属钴的价态等)不变的情况下,评价了La的助催化效果,取得了一些有益的结果.     

Determination of coenzyme Q10, alpha-tocopherol and cholesterol in biological samples by coupled-column liquid chromatography with coulometric and ultraviolet detection

Coenzyme (Co) Q10, Co Q10H2, alpha-tocopherol and cholesterol were dissociated from lipoproteins in plasma by treatment with 1-propanol. The supernatant obtained was injected directly for determination of Co Q10 and Co Q10H2. Precolumn reduction with borohydride was used for determination of total Co Q10 simultaneously with alpha-tocopherol and cholesterol. Total Co Q10 in freeze-dried myocardial biopsies was determined after extraction with 1-propanol and oxidation of Co Q10H2 with ferric chloride. The chromatographic system comprised two reversed-phase columns and a three-electrode coulometric detector and a UV detector coupled in series. A pre-fractionation on the first column protected the coulometric detector from contamination and reduced the time for analysis by eliminating strongly retained solutes. The coulometric electrodes were operated in the oxidation-reduction-oxidation mode, and the last electrode was used for detection of alpha-tocopherol, Co Q10 and Co Q10H2, while cholesterol was detected by UV at 215 nm. The fast isolation procedure made it possible to determine the reduced and oxidized forms of Co Q10 in plasma. Quantitative recoveries were obtained for all the analytes studied and normal levels were determined with a coefficient of variation of 2-3%.     

Co掺杂SAPO-5分子筛制备及其催化氧气氧化环己烷反应性能(英文)

环己醇和环己酮(KA油)是制备尼龙所需材料己二酸和己内酰胺的重要中间体,也可用作油漆、农药和染料等的溶剂以及染色和褪光丝的均化剂等.工业上制取KA油的方法主要为苯酚加氢法、环己烯水合法和环己烷氧化法,其中环己烷氧化法最为普遍,是非常重要的工业过程.为获得适宜的KA油选择性,工业上普遍采用Co盐为催化剂,将环己烷氧化单程转化率控制在5.0%以下,从而使得产物选择性达到70%以上.该环己烷氧化制KA油过程不仅生产效率较低,而且所用均相催化剂因分离困难而不能重复使用.因此,当前关于环己烷氧化反应催化剂的研究均是围绕多相催化剂进行.氧气选择性氧化环己烷反应因具有更高的原子经济性而逐渐成为环己烷氧化法制KA油研究中最具挑战性的课题.该反应是自由基机理,而Co~(2+),Cr~(3+),Mn~(2+)和Ce~(2+)等金属离子可以促进自由基链反应,因此含有这些金属的多相催化剂被广泛用于该反应.另一方面,AlPO-n系列分子筛由于具有特殊的孔结构和一定的表面酸性,在催化反应中显示出较大的应用潜力.如果进行杂原子掺杂,通过改变分子筛骨架的电荷平衡,可以有效提高其表面酸性.例如磷酸硅铝分子筛(SAPO-5)具有中等强度的酸性和良好的择形性,因而作为固体酸催化剂广泛用于乙醇脱水、甲醇制烯烃、丙烯聚合和苯乙烯环氧化等反应,表现出较高的选择性和良好的稳定性.本文以传统均相Co盐催化剂的多相化为出发点,制备了Co掺杂SAPO-5与分子筛催化剂(Co-SAPO-5),考察了Co掺杂量对催化剂结构、表面性质以及氧气选择性氧化环己烷反应性能的影响.结果表明,一部分Co进入分子筛骨架,同时有少量Co以氧化钻形式高度分散在SAPO-5表面.Co掺杂对SAOP-5催化剂比表面积没有显著影响,但可使其孔体积减小.相反,Co掺杂可以提高SAOP-5分子筛表面B酸性位数量和总酸量.活性测试结果表明,环己烷转化率随着Co-SAPO-5催化剂中Co含量的增加而增加,但KA油选择性在转化率高于6.3%时急剧下降.还考察了反应温度、反应时间、初始氧气压力和催化剂用量对Co-SAPO-5分子筛催化剂性能的影响,得到了最优反应条件.以Co-SAPO-5-0.2(Co/Si摩尔比为0.2)分子筛为催化剂时,KA油总收率最高可达7.8%.另外,Co-SAPO-5催化剂在环己烷氧化反应中显示出很好的稳定性,Co-SAPO-5-0.2催化剂套用6次后活性几乎没有变化.     

Synthesis and Adsorption Performance of Surface‐Grafted Co(II)‐Imprinted Polymer for Selective Removal of Cobalt

The surface‐grafting ion‐imprinting technology was applied to synthesis of a new Co(II)‐imprinted polymer [Co(II)‐IP], which could be used for selective removal of Co(II) from aqueous solutions. The prepared polymer was characterized by using the infrared spectra (IR), X‐ray diffractometer (XRD), X‐ray energy dispersion spectroscopy (EDS) and scanning electron microscopy (SEM). The maximum adsorption capacity values for the Co(II)‐imprinted polymer and non‐imprinted polymer (NIP) were 22 and 8 mg/g, respectively. The Freundlich equation fitted the adsorption isotherm data well. The applicability of two kinetic models including pseudo‐first‐order and pseudo‐second‐order models was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium capacity, and correlation coefficients. Results suggested that chemical process could be the rate‐limiting step in the adsorption process. And the adsorption of Co(II) on the Co(II)‐imprinted polymer was endothermic. The relative selectivity coefficients of the Co(II)‐imprinted polymer for Co(II)/Pb(II), Co(II)/Cu(II), Co(II)/Ni(II), Co(II)/Sr(II) and Co(II)/Cs(I) were respectively 11.5, 6.1, 13.8, 9.4, and 8.1 times greater than that of the non‐imprinted polymer. Eventually, the desorption conditions of the adsorbed Co(II) from the Co(II)‐imprinted polymer were also studied in batch experiments.     

N‐Doped Sub‐3 nm Co Nanoparticles as Highly Efficient and Durable Aerobic Oxidative Coupling Catalysts

A nano‐coating associated with sulfuric acid leaching protocol was developed to prepare N‐doped sub‐3 nm Co‐based nanoparticle catalyst (Co?N/C) using melamine–formaldehyde resin as the N‐containing precursor, active carbon as the support, and Co(NO₃)₂ as the Co‐containing precursor. By thermal treatment under nitrogen atmosphere at 800 °C and leached with sulfuric acid solution, a stable and highly dispersive Co?N coordination structure was uniformly dispersed on the formed Co?N/C catalyst with a Co loading of 0.47 wt % and Co nanoparticle size of 2.55 nm. The Co?N/C catalyst was characterized with XRD, XPS, Raman, SEM, TEM, ICP, and elemental analysis. The Co?N/C catalyst showed extremely high catalytic efficiency with a TON of 257 for the aerobic oxidative coupling of aldehydes with methanol to directly synthesize methyl esters with molecular oxygen as the final oxidant. The Co?N/C catalyst also showed broad substrate range and stable recyclability. After recycling for 7 times, no obvious deactivation was detected. It was confirmed that the sub‐3 nm Co?N coordination structure formed between metallic Co nanoparticles and pyridinic nitrogen doping into graphitic layers functions as the active site to activate molecular oxygen for the β‐H elimination from generated hemiacetal intermediates to produce methyl esters. The nano‐coating associated with acid leaching protocol provides a novel strategy to prepare highly efficient non‐precious metal‐based catalysts.     

Co3O4/CeO2 CO氧化的原位红外光谱研究

采用沉淀氧化法制备了Co₃O₄/CeO₂催化剂。分别在干、湿条件下进行了一氧化碳氧化反应研究。运用FT-IR表征手段,在钴铈复合氧化物上进行了CO吸附及CO/O₂共吸附研究。结果表明,与纯的Co₃O₄样品相比,Co₃O₄/CeO₂具有明显的抗湿气能力。Co₃O₄/CeO₂催化剂在进行CO氧化时,表面形成了类碳酸盐物种。当环境温度低于453 K时,催化剂上类碳酸盐的生成与形成类碳酸盐物种后受热分解存在着动态平衡。当环境温度高于493 K,催化剂上生成的类碳酸盐物全部受热分解。氧化铈的加入提高了催化剂的抗湿气性能。较小粒径的Co₃O₄与CeO₂产生的强相互作用可使CeO₂向Co₃O₄提供氧,因而间接提供了CO氧化需要的氧。     

Determination of cobalt by adsorptive stripping voltammetry with double accumulation and stripping steps

A double accumulation and stripping steps were proposed to increase the sensitivity of Co(II) determination by catalytic adsorptive stripping voltammetry (AdSV). Electrodes with large and small surface area were used for the first and second accumulation step, respectively. As the accumulation of Co(II) complex at the first electrode was finished, the electrode was placed at a short distance opposite the second one. Then the Co(II) complex desorbed from the first electrode was accumulated at the second electrode. Taking into account the small volume of space between the electrodes, the concentration of the Co(II) complex in solution between the electrodes was drastically higher than that in the bulk solution. The accumulation step at the second electrode was performed from the solution with higher concentration of Co(II) and therefore the detection limit was lowered. The calibration graph of Co(II) determination for accumulation time of 120 s at both electrodes was linear from 1.18 to 58.9 ng L^?1. The detection limit for Co(II) was equal to 0.47 ng L^?1 and it is so far the lowest detection limit obtained for Co(II) using mercury-free electrodes. The proposed method was applied to Co(II) determination in water certified reference material.     

Graphene-xerogel-based non-precious metal catalyst for oxygen reduction reaction

Graphene-xerogel-based Co–N cathode catalyst (Co–N-GX) for the oxygen reduction reaction (ORR) was prepared through a simple approach. The Co–N-GX shows a more positive onset potential, higher cathodic density for the ORR in alkaline media than graphene-sheet-based Co–N catalyst (Co–N-GS), highlighting the importance of high specific surface area for improving the ORR performance. The proposed approach makes the Co–N-GX catalyst a non-precious metal cathode catalyst for fuel cells.     

钴基催化剂在费-托反应过程中的失活行为

 考察了 Co/SiO₂, Co/Ru/SiO₂ 和疏水改性 Co/Ru/SiO₂ 催化剂在费-托合成过程中的稳定性.结果发现, 随着反应的进行, 三种催化剂都呈现一定程度的失活,它们稳定性高低顺序为: 疏水改性 Co/Ru/SiO₂ > Co/SiO₂ > Co/Ru/SiO₂. Co/SiO₂ 催化剂的失活是由于催化剂上 Co 晶粒的长大和硅酸钴物种的生成, 而 Co/Ru/SiO₂和疏水改性 Co/Ru/SiO₂的失活则是由于催化剂上 Co 晶粒的长大所致. 由于 Co/Ru/SiO₂ 催化剂的 Co 晶粒比 Co/SiO₂催化剂的小得多, 在反应过程中更容易长大, 所以 Co/Ru/SiO₂催化剂稳定性更差; 而疏水改性 Co/Ru/SiO₂催化剂表面的疏水性既抑制了硅酸钴物种的形成, 又使 Co 晶粒长大较慢, 因此其稳定性最高.     

氧还原和析氧反应的双功能电催化剂--氮磷共掺碳负载四氧化三钴

金属-空气电池具备诸多优势,譬如绿色环保、能量转化率高、启动快速、能量密度高、使用寿命和干态存储时间长等.与燃料电池相比,金属-空气电池结构简单,放电电压平稳,成本低,但依然存在一些制约发展的问题,如阴极催化剂.阴极催化剂在金属-空气电池中发挥催化氧还原反应(oxygen reduction reaction, ORR)和析氧反应(oxygen evolution reac-tion, OER)的关键作用.铂及其合金常用作 ORR的单功能催化剂,而钌和铱等是目前 OER催化效率最高的,但 ORR活性很低,因此需要开发出一种廉价而又具备双功能催化作用的催化剂.单异原子掺杂的碳基催化剂的研究集中在 ORR催化性能上,而多异原子共掺碳最近有研究表明具有双催化氧的性质,如氮磷共掺碳.在这些氮磷共掺的碳架中,氮磷共掺物起着 OER催化作用,掺氮物为 ORR催化的活性位点,而掺磷物起着强化作用.异原子掺杂负载的钴基催化剂(如掺氮还原氧化石墨烯载 Co3O4)是近年来双功能催化剂研究的另一个热点.钴基催化剂有着催化 ORR和 OER的多价价态,然而其本身导电性能差,这一缺陷可通过杂化石墨化碳来弥补,石墨化碳有着优良的导电性能.据我们所知,目前仍没有关于氮磷共掺碳负载的 Co3O4双催化氧的研究.我们合成了氮磷共掺碳(NPC)负载的 Co3O4(Co3O4/NPC),并首次探索了其氧还原和析氧性能. Co3O4/NPC合成分两步进行.首先通过三聚氰胺与植酸之间的酯化或缩聚覆盖在导电炭黑颗粒表面,在保护气氛下焙烧得到 NPC,然后经溶剂热反应以及空气中氧化合成 Co3O4/NPC.催化剂的性能综合考虑了催化活性和稳定性两方面.采用线性扫描伏安法评估了 OER和 ORR的催化活性.对于 OER, Co3O4/NPC的起始电势是0.54 V (以饱和甘汞电极为参比电极),在0.80 V时电流密度达到21.95 mA/cm2,均优于 Co3O4/C和 NPC. Co3O4/NPC的高效 OER催化可归因于氮磷共掺物与 Co3O4之间的协同作用.对于 ORR, Co3O4/NPC的催化效率与商用 Pt/C相近,它们的扩散极限电流密度分别为–4.49和–4.76 mA/cm2(E =–0.80 V).在 ORR过程中, Co3O4起到主要的催化作用.采用计时电流(电流-时间)法评估了催化剂的稳定性.经6 h测定,对于 OER, Co3O4/NPC剩46%电流;而对于 ORR,剩95%电流.整体而言, Co3O4/NPC在 OER和 ORR中都表现出高的催化效率以及良好的稳定性.