ICP–MS法测定食品接触纸制品中铬、镍、砷、镉、铅、汞

建立电感耦合等离子体质谱法(ICP–MS)测定食品接触纸制品中铬、镍、砷、镉、铅、汞6种重金属含量的方法。样品经微波消解处理后用ICP–MS进行测定,内标法定量。在优化实验条件下,测定汞元素的线性范围在0~10μg/L之间,测定铅、镉、铬、镍、砷元素的线性范围在0~100μg/L之间,相关系数均大于0.999。各元素的检出限为0.001~0.1 mg/kg,加标回收率为89.3%~116.0%,测定结果的相对标准偏差为3.5%~7.9%(n=6)。该方法样品处理简单,检测灵敏度高,适用于食品接触纸制品中铬、镍、砷、镉、铅、汞的检测。     

ICP–AES法同时检测生蚝中铅、铜、镉、铬、铁含量时3种样品前处理方法比较

采用干法、湿法和微波消解法处理珠海生蚝样品,用电感耦合等离子体发射光谱仪在谱线Pb 220.3 nm,Cu 324.7 nm,Cd 228.8 nm,Cr 283.5 nm,Fe 259.9 nm下测定样品中铅、铜、镉、铬、铁5种重金属元素的含量。结果表明,珠海市4个养殖基地的生蚝重金属含量均在国标限量范围内。铅、铜、镉、铬、铁各元素线性相关系数分别为0.999 8,0.999 4,0.999 9,0.999 2,0.997 8,检出限分别为0.020,0.014,0.001,0.036,0.120 mg/kg。干法、湿法、微波消解法的加标回收率分别为72.8%~99.3%,88.0%~102.0%,89.0%~103.0%。微波消解处理样品,ICP–AES法同时测定4种样品中5种重金属的含量,其测定结果的相对标准偏差均小于17%。微波消解–ICP–AES适合生蚝中铅、铜、镉、铬、铁含量的快速测定。     

ICP–OES法检测玩具涂层中17种可迁移元素

建立了电感耦合等离子体发射光谱法(ICP–OES)法同时测定玩具涂层中17种可迁移元素的方法。样品经盐酸溶液提取,利用ICP–OES进行测定。砷、镉、钴、铬、镍、铅、锑、硒元素的线性范围为0.02~2 mg/L,铝、硼、钡、铜、锡、锶、锌、锰的线性范围为0.1~10 mg/L,汞的线性范围为0.02~0.5 mg/L,线性相关系数r≥0.996。方法检出限为0.000 2~0.015 9 mg/L,加标回收率为90.1%~108.1%,重复测定结果的相对标准偏差为0.23%~2.23%(n=6)。该方法简便、快速,具有较高的准确度和良好的精密度,适用于大多数玩具材料中17中可迁移元素的检测,能满足欧盟玩具安全指令的要求。     

密闭高压消解–ICP–AES测定进口铜精矿中铅、镉、汞、砷

采用密闭高压消解法对样品进行消解,用电感耦合等离子体发射光谱法(ICP–AES)测定进口铜精矿中的铅、镉、砷、汞有害元素。铅、镉、砷、汞的工作曲线分别在0~10,0~1,0~4,0~0.6μg/mL范围内线性良好,线性相关系数大于0.999。各元素加标回收率均为91.0%~104.7%,相对标准偏差均小于3%(n=7)。将密闭高压消解法与电热板加热法和微波消解法进行了比对分析,结果显示,密闭高压消解–ICP–AES法适合用于铜精矿样品的消解与测定。     

电感耦合等离子体原子发射光谱同时测定不锈钢厨具铬、镍、镉、铅、砷迁移量

干净的不锈钢厨具样品(5.0 cm×5.0 cm)用乙酸浸泡24 h后,采用电感耦合等离子体原子发射光谱法(ICP-AES)测定不锈钢厨具中铬、镍、镉、铅,采用氢化物发生-ICP-AES测定其中砷的迁移量。研究了介质的酸度、硼氢化钾浓度对砷信号强度的影响,并考察了其他元素对砷测定的化学干扰。选择波长为267.716,231.604,214.438,220.353,193.695 nm 5条谱线依次作为测定铬、镍、镉、铅和砷的分析线。铬、镍、镉、铅和砷的检出限(3s)分别为0.032,0.026,0.006,0.033,0.007 5 mg.L-1,相对标准偏差(n=10)依次为0.7%,0.8%,3.1%,1.2%,3.6%。应用此法测定样品中5种元素测定值与国标法GB/T 5009.81-2003的测定值相比,两种方法所得结果相一致。     

ICP–AES法同时测定食品包装铝箔中锌、铅、镉、砷的溶出量

建立了ICP–AES法同时测定食品包装铝箔中锌、铅、镉、砷溶出量的方法。以4%乙酸溶液浸泡样品,室温放置24 h,分析线为Zn 213.856,Pb 220.353,Cd 226.502,As 193.759 nm。Zn,Pb,Cd,As的线性范围分别为0.3~5.0,0.1~2.0,0.01~0.2,0.03~0.5 mg/L,线性方程分别为Y=23 487.27X+769.79,Y=6 713.35X+38.46,Y=30 562.52X+362.02,Y=6 448.97X+13.57;相关系数分别为0.999 9,0.999 8,0.999 9,0.999 5;检出限分别为0.009 6,0.003 7,0.000 4,0.013 9mg/L;加标回收率为96.5%~100.5%;相对标准偏差为1.38%~3.06%(n=6)。该方法简便快速,测定结果准确。     

微波消解–ICP–OES法测定陶土中铅和镉含量

建立微波消解–ICP–OES法测定陶土中铅和镉含量的方法。采用氢氟酸–硝酸作为消解液,微波消解法处理样品,消解液定容后直接进入耐氢氟酸的进样系统,用ICP–OES法测定陶土中重金属铅和镉的含量。结果表明,Pb和Cd检出限分别为0.027μg/m L和0.011μg/m L,回收率分别为90.5%~98.8%和95.0%~98.4%,测定结果相对标准偏差分别为1.38%和2.17%(n=7)。该方法具有快速、准确、灵敏度高等优点,适用于陶土中铅和镉含量的检测。     

不锈钢炊具食品安全新国标降门槛

前不久，《食品安全国家标准不锈钢制品（GB9684-2011）》（下称“新国标”）发布实施。新国标适用于不锈钢的食具容器及食品生产经营用工具、设备，对所用不锈钢中铬、镍、镉、砷等重金属的迁移量做出了明确限定。新国标放宽了不锈钢的用材范围，没有规定不锈钢的具体牌号，对金属迁移量的限定，也不涉及锰。     

ICP–OES法测定绿茶中7种重金属元素的溶出量

建立了以电感耦合等离子体原子发射光谱(ICP–OES)法同时测定绿茶中铁、铜、锰、镍、锌、镉、铅等7种重金属元素溶出量的方法。以3种绿茶为研究对象,通过模拟实际生活中的泡茶方式,用100℃的水浸泡茶叶,过滤后用ICP–OES法进行测定。结果表明,随着浸泡时间的延长,重金属元素的溶出量逐渐增加;随着茶叶被浸泡的次数增加,重金属元素的溶出量逐渐降低。7种重金属的添加水平为0.003~4μg/m L时,加标回收率为100.00%~109.55%。测定结果的相对标准偏差为2.17%~7.13%(n=7)。检出限为0.012~0.622 mg/kg。该方法快速简单,具有良好的精密度与准确度,可用于茶叶中重金属的测定。     

石墨消解-动态反应池模式-电感耦合等离子体质谱法测定烟用香精和料液中5种元素的含量北大核心CSCD

将烟用香精和料液样品0.3 g(精确至0.001 g)置于全自动石墨消解仪消解罐中,分3次加入消解液(共计10 mL硝酸、1 mL高氯酸),在170℃的最高消解温度下,样品消解完全.所得溶液用水定容至50 mL,采用电感耦合等离子体质谱法(ICP-MS)测定其中砷、铅、镉、铬、镍等元素的含量.以铟为内标,铬、镉、镍、铅、砷元素的测量同位素分别为^(52)Cr、^(111)Cd、^(60)Ni、^(208)Pb、^(75)As,使用动态反应池(DRC)模式消除了铬、砷元素的质谱干扰,铬、镉、镍、铅等元素的测定选择氦气碰撞模式,砷元素的测定选择氢气反应模式.结果表明,5种元素的质量浓度在一定范围内与各元素与内标计数值的比值呈线性关系,检出限(3s)为0.016~0.035 mg·kg^(-1).按标准加入法进行回收试验,各元素回收率为91.5%~111%,相对标准偏差(n=6)为0.28%~3.1%.方法用于10个烟用香精和料液样品的分析,铬、砷、镍的检出量分别为0.019~0.061 mg·kg^(-1),0.039~0.061 mg·kg^(-1)和0.022~0.031 mg·kg^(-1),镉和铅未检出.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.