凝胶色谱净化/气质联用法测定即食豆制品中二甲基黄

建立了凝胶渗透色谱结合气相色谱-质谱测定即食豆制品中二甲基黄的分析方法。样品采用正己烷提取,凝胶渗透色谱净化,经DB-5 ms毛细管柱分离,选择离子监测模式(SIM)对目标化合物进行检测和确认。该方法在0.1~5μg/m L范围内线性关系良好,相关系数大于0.999。二甲基黄在0.5,1.0,1.5 mg/kg 3个添加水平的回收率为94.0%~101.0%,相对标准偏差为1.5%~2.2%。方法检出限为0.007 mg/kg。方法适用于即食豆制品中二甲基黄的定性定量分析。     

快速溶剂萃取–凝胶渗透色谱净化–气相色谱质谱法测定土壤中邻甲苯胺含量

以快速溶剂萃取–凝胶渗透色谱净化–气相色谱质谱法测定土壤中邻甲苯胺的含量。土壤样品经ASE–350快速溶剂萃取仪萃取,萃取液用凝胶渗透色谱净化浓缩后,用全扫描模式(SCAN)采集气相色谱–质谱法测定土壤中的邻甲苯胺含量。该方法检出限为0.01 mg/kg,加标回收率为78.3%~95.5%,测定结果的相对标准偏差为2.35%~14.9%(n=6)。该方法具有分离效果好、灵敏度高、重现性好、前处理操作简便及纯化效果好等优点,可用于测定土壤中邻甲苯胺的含量。     

QuEChERS/气相色谱质谱法同时测定膨化食品中多环芳烃类物质

建立了同时测定膨化食品中12种多环芳烃(PAHs)的Qu EChERS/气相色谱三重四极杆质谱(GC-MS/MS)的方法。称取2 g(精确至0.01 g)样品,加入10 mL正己烷提取15 min,采用500 mg乙二胺-N-丙基硅烷化硅胶(PAS)和500 mg C18粉末进行净化,净化后进行GC-MS/MS分析测定。实验结果表明,12种多环芳烃在气相色谱中的分离度良好,在1~1000 ng/mL的浓度范围内线性关系良好。加标回收率测定范围为49%~130%,RSD在1.0%~10%(n=7)之间。检出限在0.20~0.66μg/kg之间,定量限在0.66~2.20μg/kg之间。该方法数据可靠、操作简单快捷、灵敏度高,适合大批量样品中PAHs的测定。     

加速溶剂萃取-固相萃取-气相色谱串联质谱测定土壤中的乙草胺

提出一种准确、高效测定土壤中乙草胺的分析方法。优化方法后,土壤样品经过预处理,加速溶剂萃取(ASE),固相萃取柱(SPE)净化,样液经气相色谱串联质谱仪(GC-MS/MS)测定,用空白样品基质液配标,浓度在0.005~0.2μg/mL范围内,线性相关系数达0.9998。对空白土壤样品进行0.5,5,20μg/kg 3个水平加标(n=6),平均回收率为89.3%~102.1%,RSD范围为2.9%~4.1%。此方法可用于实际样品测定。     

固相萃取–气相色谱–串联质谱法测定茶叶中9种农药残留量

建立固相萃取净化–气相色谱–串联质谱法同时测定茶叶中9种农药残留量的方法。茶叶样品用乙腈均质提取,提取液经固相萃取净化处理后,采用DB–5MS毛细管色谱柱分离,在多反应监测模式下测定,外标法定量。9种农药组分的质量浓度在0.01~0.50 mg/L范围内与其色谱峰面积呈良好线性,相关系数r~2大于0.998,方法测定下限(10 S/N)为0.002~0.01 mg/kg。以空白绿茶、红茶、普洱茶和乌龙茶为基体,在0.05,0.1,0.2 mg/kg 3个添加水平进行加标回收试验,加标回收率在73.6%~99.7%之间,相对标准偏差为4.2%~8.7%(n=6)。该法操作简便、快速,适用于茶叶中多种农药残留的测定。     

快速溶剂萃取–气相色谱质谱法测定土壤中戊唑醇残留量

建立快速溶剂萃取–气相色谱质谱法测定土壤中戊唑醇残留量的分析方法。土壤样品经ASE–350快速溶剂萃取仪萃取,萃取液用硅酸镁(弗罗里硅土)柱净化浓缩,然后用选择离子监测/全扫描(SIM/SCAN)模式,气相色谱–质谱法测定土壤中的戊唑醇含量。该方法检出限为0.008 mg/kg,加标回收率为84.0%~97.5%,测定结果的相对标准偏差为2.2%~11.6%(n=6)。该方法具有分离效果好,灵敏度高,重现性好,前处理操作简便等优点,可用于测定土壤中戊唑醇的残留量。     

固相萃取-气相色谱法检测枸杞子中啶虫脒的残留量

采用固相萃取-气相色谱法检测枸杞子中啶虫脒残留量。用乙腈提取样品中的啶虫脒,活性炭和中性氧化铝串联固相萃取柱净化,用气相色谱微电子捕获检测器进行检测。在0.02~5.0mg/L的浓度范围内,啶虫脒的线性关系良好,相关系数r=0.9999,回收率在81.3%~108.8%之间,检出限为0.005mg/kg。该方法可用于枸杞子中啶虫脒残留量的测定。     

SPE–HPLC法测定酒、糖果、巧克力中的喹啉黄

建立了固相萃取–高效液相色谱(SPE–HPLC)测定酒、糖果、巧克力中喹啉黄的方法。样品分别经水、70%甲醇水溶液提取,提取液经聚酰胺固相萃取柱净化,采用C18色谱柱,以0.02 mol/L乙酸铵溶液和甲醇为流动相进行梯度洗脱,用高效液相色谱仪对酒、糖果、巧克力中喹啉黄的含量进行了测定。喹啉黄的质量浓度在5.0~100.0mg/L范围内与其色谱峰面积呈良好的线性关系,线性相关系数大于0.999 9,方法的检出限酒为2.5 mg/L、糖果和巧克力2.5 mg/kg。样品的平均加标回收率为83.2%~92.2%,测定结果的相对标准偏差均小于4.4%(n=6)。该方法快速,定量准确,可用于酒、糖果、巧克力中喹啉黄的测定。     

冷冻去脂-固相萃取-气相色谱法快速测定水产品中硫丹、硫丹硫酸酯和溴氰菊酯残留量

建立了气相色谱快速测定水产品中硫丹、硫丹硫酸酯和溴氰菊酯的残留量的方法。样品经过V(丙酮)∶V(正己烷)=1∶1提取,冷冻去除脂肪后,再用中性氧化铝SPE柱净化,然后用GC-μECD测定,外标法定量。对样品的提取和净化进行了研究和优化。目标化合物在0.005~0.1 mg/L范围内线性良好,相关系数为0.9994~0.9997。在0.005~0.02 mg/kg范围内,平均回收率在78.3%~89.2%,相对标准偏差为4.2%~9.7%。方法可用于水产品中硫丹、硫丹硫酸酯和溴氰菊酯残留量的检验。     

固相萃取–气相色谱–负化学源质谱法检测水果和蔬菜中的毒杀芬

采用改进的分散固相萃取(QuEchERs)法对样品进行前处理,建立水果和蔬菜中毒杀芬残留的气相色谱–负化学电离源质谱(GC–NCI–MS)检测方法。样品中的毒杀芬由正己烷提取,经吸附剂PSA+GCB净化,在GC–NCI–MS的选择离子扫描模式下进样分析。毒杀芬的色谱保留时间在12.5~18.0 min区间内,采用面积归一化法积分,外标法定量。毒杀芬质量浓度在0.050~2.000 mg/L范围内与色谱峰面积呈良好的线性关系,相关系数r=0.999 1。分别以蓝莓、黄桃、菠菜为基质,在0.025,0.050 mg/kg添加水平下,毒杀芬的回收率为107.2%~118.1%,测定结果的相对标准偏差为5.5%~8.8%(n=6),定量限为0.025 mg/kg。该方法检测快速,适用于水果和蔬菜中毒杀芬残留的日常检测。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.