侧链含氨基的PLGA-(PEGA-SP)_n共聚物的合成与表征

以聚乙二醇(PEG)和N -苄氧羰基 -L- 天冬氨酸酐为原料,通过溶液缩聚法制备了聚(聚乙二醇 -co -L -天冬氨酸)交替预聚物(PEG- ASP) n;进一步以辛酸亚锡为催化剂、(PEG- ASP) n 为共引发剂引发D ,L- LA和GA开环共聚合成了带有侧氨基功能基团的PLGA (PEG- ASP) n 共聚物.用GPC、FT -IR、1 H -NMR、DSC等研究了共聚物的结构和性能.结果表明,共聚物表现为典型的无定形聚合物;(PEG- ASP) n 的含量对共聚物的性能有显著影响,随(PEG- ASP) n 含量增加,共聚物的亲水性增强,玻璃化转变温度(Tg)下降;以Pd(5wt% ) C为催化剂,采用催化加氢方法可完全脱除共聚物侧氨基上的保护基团;脱除侧氨基上的保护基团后,共聚物的分子量和Tg 值均略有增大,亲水性有所提高.     

立构规整性二氧化碳共聚物:从无定型到结晶性材料转变

二氧化碳与环氧烷烃交替共聚制备降解性聚碳酸酯是重要的绿色聚合反应之一.尽管二氧化碳共聚物的工业化已经具备了一定基础,但却受制于材料性能、品种单一等问题,发展十分缓慢.先前发展的二氧化碳基聚碳酸酯是非晶且玻璃化转变温度较低,存在高温强度迅速变差等问题.通过立构规整性聚合使碳酸酯单元在主链上有序排列可能是该类聚合物结晶的主要途径.本文重点介绍了二氧化碳与环氧烷烃的立构规整性聚合方面的最新研究进展,包括高立构规整性催化剂的设计,以及结晶性二氧化碳基聚碳酸酯的创制工作.     

脂肪族聚碳酸酯共聚物的研究进展

脂肪族聚碳酸酯共聚物是一类可完全生物降解的新型材料,自1969年井上祥平等首次通过二氧化碳与环氧化合物反应合成脂肪族聚碳酸酯以来,人们在将二氧化碳固定为全降解聚合物这一研究领域取得了大量研究成果.本文综述了用于二氧化碳和环氧化合物共聚合成脂肪族聚碳酸酯的各类催化剂及反应机理,讨论了脂肪族聚碳酸酯结构/性能关系,并简要介绍了其在不同领域的应用.     

结构明确聚烯烃接枝共聚物:合成、结构与性能

实现聚烯烃功能化是制备高性能聚烯烃材料、拓展聚烯烃应用的重要手段,几十年来得到了学术界及工业界的广泛关注。聚烯烃接枝共聚物作为一类重要的功能化聚烯烃,包含聚烯烃链段（PE、PP等）及功能化聚合物链段（PS、PMMA、PEG等）,因而在提高功能单元含量的同时能保持聚烯烃单元优异的结晶、加工性能。结构明确的聚烯烃接枝共聚物,具有结构参数可控、综合性能可调的特点,对于认识聚合物材料结构-性能关系、拓展聚烯烃应用范围具有重要的学术和实际意义。聚烯烃接枝共聚物的合成方法可以分为三种类型：“共聚接枝（graft-through）”、“引出接枝（graft-from）”、“偶联接枝（graft-onto）”。前两种合成方法往往涉及烯烃配位聚合与其他聚合方式的机理转化过程;其中,反应性聚合物中间体作为大分子引发剂、大分子RAFT试剂、大分子单体参与接枝反应,实现接枝共聚物的可控制备。第三种方法思路简单明确,即利用聚烯烃侧基反应性基团与其他聚合物反应性端基之间的高效偶联反应实现接枝共聚物制备。本文从合成、结构及性能三方面较为全面地综述了结构明确聚烯烃接枝共聚物的研究进展,着重讨论了新兴合成方法及相应接枝共聚物的潜在应用。     

磷酰胆碱基共聚物的合成及其稳定聚合物涂层表面的构筑

设计并合成了侧基分别含有磷酰胆碱(PC)亲水基团和胆固醇(Chol)疏水基团的两亲性二元无规共聚物PMC,用其对疏水基材聚丙烯中空纤维膜(PPHF)表面进行亲水改性,并以疏水基团为十二烷基柔性烷烃的磷酰胆碱基两亲性二元无规共聚物PML为参照聚合物,研究了聚合物涂层加热处理及空气中久置后涂层表面的稳定性.用1H-NMR和DSC对二元随机共聚物PMC和PML的结构和熔点(Tm)进行测定,用ARTR和XPS表征磷酰胆碱基共聚物构筑的两性离子表面的化学成分,用接触角研究其表面亲水性,并用水的动态接触角(DCA)评价涂层表面功能基团重新迁移取向的能力.结果发现,所得二元无规共聚物PMC和PML中组成与投料比相近且PMC的熔点Tm(190.5℃)远高于PML的(90.3℃);与PML改性PPHF表面相比,PMC-PPHF表面亲水性提高,而且经100℃高温处理2 h和空气中放置8个月后,接触角和表面磷元素相对含量基本不发生变化,说明表面功能基团基本不发生重新迁移取向,表面结构稳定性好.     

端基功能化聚合物的表面性能

综述了端基功能化聚合物表面结构与性能的最新研究进展.聚合物端基功能化是实现聚合物表面改性的一种有效技术.通过端基功能化可以精确控制聚合物表面功能基团的种类和数量,从而影响聚合物表面的化学结构与性能.重点论述了功能化端基在聚合物表面的离析现象和产生这一现象的原因,以及功能化端基对聚合物表面分子运动能力的影响.本文还介绍了近年来用于研究端基功能化聚合物表面的表征新技术,如SFG、NR、SSIMS等.对端基功能化聚合物表面的环境响应性也进行了阐述.指出了利用不同功能化端基可以有效地控制聚合物表面的亲疏水性.并对端基功能化聚合物的应用进行了展望.     

二氧化碳合成脂肪族聚碳酸酯

介绍了二氧化碳合成脂肪族聚碳酸酯（APC）的合成工艺、催化剂体系、物理化学性能以及改性,并阐述了共聚物性质和应用前景。     

呋喃甲基缩水甘油醚与二氧化碳的共聚反应研究

采用糠醇和环氧氯丙烷反应制备了纯度较高的呋喃甲基缩水甘油醚,随后呋喃甲基缩水甘油醚与二氧化碳在稀土三元催化剂Y(CCl3COO)3-甘油-ZnEt2的催化下发生共聚反应,生成侧链为呋喃甲醚侧基的脂肪族聚碳酸酯.共聚物主链结构规整,主要为聚酯结构,数均分子量最高可达13.0×104,共聚物的玻璃化转变温度为-29～-30℃,5wt%起始热分解温度大于231℃.     

PLA大分子单体接枝NVP共聚物的合成与性能

制备了末端为双键的功能化聚乳酸大分子单体(PLA-HEMA),并以此大分子单体与N-乙烯基吡咯烷酮(NVP)进行自由基溶液共聚,合成了具有亲水性PVP-PHEMA主链和疏水性PLA支链的接枝共聚物。用FT-IR1、H-NMR、GPC、DSC、表面接触角测定研究了共聚物的结构与性能。结果表明:共聚物为非晶聚合物;NVP的摩尔投料量对共聚物的性能有显著影响,随NVP投料量增大,共聚物的分子量有所下降,玻璃化转变温度(Tg)增大;由于亲水性PVP和PHEMA链段的引入,共聚物的亲水性优于相应的线型聚乳酸材料。     

侧链含卤素基团聚芳醚酮的合成及性能

通过分子设计, 合成了新型含碘基苯基的双酚单体4-碘苯基对苯二酚(I-Ph-HQ), 利用上述单体与含氟双酚单体(3-三氟甲基)苯基对苯二酚和氟酮通过亲核取代缩聚反应合成了一系列侧链含卤素基团的聚芳醚酮共聚物(PEEK-CF₃-I). 通过FTIR和 ¹H NMR等测试手段, 表征了共聚物的化学结构. 研究了所合成的PEEK-CF₃-I共聚物的介电性能、热性能和机械性能, 探讨了共聚物中含碘侧基和含氟侧基含量的变化及对材料各项性能的影响. 研究表明, 共聚物中含碘侧基含量的增加能够显著提升共聚物的玻璃化转变温度, 其中共聚物材料PEEK-CF₃-I-10%的玻璃化转变温度为153 ℃, 同时材料依然能够保持优异的机械性能和较低的介电常数.     

Perfectly alternating copolymerization of CO2 and epichlorohydrin using cobalt(III)-based catalyst systems

Selective transformations of carbon dioxide and epoxides into biodegradable polycarbonates by the alternating copolymerization of the two monomers represent some of the most well-studied and innovative technologies for potential large-scale utilization of carbon dioxide in chemical synthesis. For the most part, previous studies of these processes have focused on the use of aliphatic terminal epoxides or cyclohexene oxide derivatives, with only rare reports concerning the synthesis of CO(2) copolymers from epoxides containing electron-withdrawing groups such as styrene oxide. Herein we report the production of the CO(2) copolymer with more than 99% carbonate linkages from the coupling of CO(2) with epichlorohydrin, employing binary and bifunctional (salen)cobalt(III)-based catalyst systems. Comparative kinetic studies were performed via in situ infrared measurements as a function of temperature to assess the activation barriers for the production of cyclic carbonate versus copolymer involving two electronically different epoxides: epichlorohydrin and propylene oxide. The relative small activation energy difference between copolymer versus cyclic carbonate formation for the epichlorohydrin/CO(2) process (45.4 kJ/mol) accounts in part for the selective synthesis of copolymer to be more difficult in comparison with the propylene oxide/CO(2) case (53.5 kJ/mol). Direct observation of the propagating polymer-chain species from the binary (salen)CoX/MTBD (X = 2,4-dinitrophenoxide and MTBD = 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene) catalyst system by means of electrospray ionization mass spectrometry confirmed the perfectly alternating nature of the copolymerization process. This observation in combination with control experiments suggests possible intermediates involving MTBD in the CO(2)/epichlorohydrin copolymerization process.     

稀土三元催化体系ZnO/SiO2负载化及季铵盐催化CO2与环氧丙烷合成高分子量聚碳酸酯

由环氧丙烷(PO)和CO2交替共聚合成脂肪族聚碳酸亚丙酯,CO2利用率高, 所得产物具有一定的力学性能和生物降解性能, 具有广泛应用前景. 目前, 用于CO2和环氧化合物共聚的催化体系主要包含锌、钴、镉、铬、铝和稀土等金属活性中心, 结构、活性各异的催化剂体系, 其催化性能和产物性能也各具特色. 其中, 稀土三元催化剂(ZnEt2-甘油-三氯乙酸钇)因合成聚碳酸酯产物的分子量高、碳酸酯单元含量高、聚醚及环碳酸酯副产物少的特点而受到关注. 但是由于催化剂催化效率低, 聚合时间长, 产品成本高, 使得工业化规模生产受到限制.本文基于稀土三元催化体系, 将催化剂负载于硅胶及锌改性硅胶, 优化了其制备条件, 同时考察了添加季铵盐对催化CO2/环氧丙烷共聚合成聚碳酸酯性能的影响. 结果表明, 在1 L聚合釜中, 于3.5 MPa和70 oC反应条件下, ZnO担载量及ZnO/SiO2添加量对反应性能均有影响. 当3 wt% ZnO/SiO2的添加量为5 g时, 稀土三元催化体系的活性为4845.2 g/molZn..所得聚合物经过多次纯化处理后, 能够有效提高材料的热学性能, 即有效除去产物中的ZnO对聚合物的热稳定性有重要作用. 添加含有不同阴离子(F- , Cl- 和Br- )的季铵盐可显著影响稀土三元催化剂的活性. 其中, 仅四甲基氟化铵可以明显提高反应活性乃至聚合物分子量. 在3 wt% ZnO/SiO2载体和四甲基氟化铵的协同作用下, 稀土三元催化体系的共聚性能明显提 升, 活性最高可达5223.0 g/molZn. 聚合物结构分析表明, 在载体和四甲基氟化铵存在下, 聚合物分子量明显提高, 可达到20万以上, 分子量分布明显变窄, 且聚合物结构如碳酸酯的单元含量、副产物含量以及聚合物产品玻璃化温度基本不变, 后者均保持在40-41 ?C. 基于此, 我们提出了在ZnO改性硅胶载体及四甲基氟化铵存在下稀土三元催化体系催化CO2/环氧丙烷共聚的反应机理: ZnO/SiO2载体有利于稀土三元催化体系的分散, 而四甲基氟化铵则有利于吸附在ZnEt2上的环氧丙烷开环.     

Bifunctional Synthetic Enzyme Candidates via Alternating Copolymerization. II. Copolymers Containing Alternating Imidazole and Phenolic Hydroxyl Functions

Alternating copolymerization offers an ideal method for introducing certain pairs of functional groups into copolymer chains in a controlled manner. In a previous paper from this laboratory, a novel copolymer containing alternating imidazole and hydroxamic acid functional groups was reported, and its evaluation as a synthetic enzyme was described. In an extension of this work, the present paper reports the synthesis, characterization, and evaluation of those novel copolymers containing alternating imidazole and phenolic hydroxyl functional groups. The results of this study indicate that “cooperativity” between this pair of functional groups is somewhat restricted, probably for reasons related to the conformation of the copolymer chains or the proximity of the functional groups to the copolymer backbone.     

以氯代钒酸酯-三异丁基铝催化体系合成丁二烯-丙烯交替共聚物的研究

本文比较了各种氯代钒酸酯-三异丁基铝体系催化丁二烯、丙烯交替共聚的活性,得出氯代钒酸二新戊酯-三异丁基铝体系催化活性最高。能制得高分子量的交替共聚物。研究了该催化体系的特点和聚合规律及提高共聚物[η]的途径。在-76--45℃温度范围内可以制得正[η]为1.7-2.6dl/g的丁丙交替共聚物,单体转化率在80％以上。通过分析鉴定,证明产物交替度在95％左右,反式1,4丁二烯组分含量在95％以上。     

Tetravalent metal complexes as a new family of catalysts for copolymerization of epoxides with carbon dioxide

New tetravalent metal complexes with a trianionic [ONNO]-tetradentate ligand and an ancillary chloride ligand were synthesized as catalysts for the copolymerization of epoxides with carbon dioxide (CO(2)). All of the titanium, zirconium, germanium, and tin complexes were found to copolymerize epoxides with CO(2). In particular, the copolymerization of propylene oxide with CO(2) gave the almost-completely alternating copolymers by using titanium or germanium complexes. These results are the first example of the copolymerization using tetravalent metal complexes as a main component of catalysts.     

Co‐syndiospecific Alternating Copolymerization of Functionalized Propylenes and Styrene by Rare‐Earth Catalysts

The precise control of monomer sequence and stereochemistry in copolymerization is of much interest and importance for the synthesis of functional polymers, but studies toward this goal have met with only limited success to date. Now, the co‐syndiospecific alternating copolymerization of methoxyphenyl‐ and N,N‐dimethylaminophenyl‐functionalized propylenes with styrene by half‐sandwich rare‐earth catalysts is reported. This reaction efficiently afforded the corresponding functionalized propylene‐alt‐styrene copolymers with a perfect alternating sequence and excellent co‐syndiotacticity (rrrr >99 %), thus constituting the first example of co‐stereospecific alternating copolymerization of polar and non‐polar olefins.     

(Salen)CrIIIX catalysts for the copolymerization of carbon dioxide and epoxides: role of the initiator and cocatalyst

The copolymerization of CO(2) and cyclohexene or propylene oxide has been examined employing (salen)Cr(III)Nu complexes (Nu = Cl or N(3)) as catalysts. The addition of various cocatalysts, including phosphines and PPN+ or Bu4N+ Cl- salts serves to greatly enhance the rate of copolymer production. In these instances, the mechanism of the initiation step appears to be unimolecular in catalyst concentration, unlike the bimolecular process cocatalyzed by N-methylimidazole. The copolymers were produced with >95% carbonate linkages with TOFs in the range 39-494 mol epoxide consumed/mol Cr.h. In the presence of phosphine cocatalysts, no cyclic carbonate was produced as a byproduct.     

Comparative kinetic studies of the copolymerization of cyclohexene oxide and propylene oxide with carbon dioxide in the presence of chromium salen derivatives. In situ FTIR measurements of copolymer vs cyclic carbonate production

The catalysis of the reaction of carbon dioxide with epoxides (cyclohexene oxide or propylene oxide) using the (salen)Cr(III)Cl complex as catalyst, where H(2)salen = N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexenediimine (1), to provide copolymer and cyclic carbonate has been investigated by in situ infrared spectroscopy. As previously demonstrated for the cyclohexene oxide/CO(2) reaction in the presence of complex 1, coupling of propylene oxide and carbon dioxide was found to occur by way of a pathway first-order in catalyst concentration. Unlike the cyclohexene oxide/carbon dioxide reaction catalyzed by complex 1, which affords completely alternating copolymer and only small quantities of trans-cyclic cyclohexyl carbonate, under similar conditions propylene oxide/carbon dioxide produces mostly cyclic propylene carbonate. Comparative kinetic measurements were performed as a function of reaction temperature to assess the activation barrier for production of cyclic carbonates and polycarbonates for the two different classes of epoxides, i.e., alicyclic (cyclohexene oxide) and aliphatic (propylene oxide). As anticipated in both instances the unimolecular pathway for cyclic carbonate formation has a larger energy of activation than the bimolecular enchainment pathway. That is, the energies of activation determined for cyclic propylene carbonate and poly(propylene carbonate) formation were 100.5 and 67.6 kJ.mol(-1), respectively, compared to the corresponding values for cyclic cyclohexyl carbonate and poly(cyclohexylene carbonate) production of 133 and 46.9 kJ.mol(-1). The small energy difference in the two concurrent reactions for the propylene oxide/CO(2) process (33 kJ.mol(-1)) accounts for the large quantity of cyclic carbonate produced at elevated temperatures in this instance.     

Alternating stereospecific copolymerization of ethylene and propylene with metallocene catalysts

The copolymerization of ethylene and propylene with bridged metallocenes Me(2)E(3-RCp)(Flu)X(2)/MAO (E = C, X = Me; E = Si, X = Cl; R = H or alkyl) was investigated. Ethylene/propylene copolymerization with metallocenes having heterotopic active sites (R =Me, i-Pr) yield alternating, isotactic ethylene/propylene copolymers with percentages of alternating EPE+PEP triads in the range of 61-76% at 50% ethylene incorporation. Both the nature of the substituent R and the bridge E influence the copolymerization behavior including the copolymerization activity, copolymer sequence distribution, molecular weight, and stereochemistry. Silicon-bridged metallocenes produce copolymers with higher activity and molecular weight but lower propylene incorporation at similar feeds than the carbon-bridged analogues. Isotactic PEPEP sequences were observed for all metallocenes, while the tacticities of the EPPE sequences varied with the bridge and the substituent on the metallocene ligand. Isotactic PEPEP sequences and atactic EPPE sequence errors in the alternating copolymers are consistent with a mechanism where the comonomers are enchained alternately at the heterotopic coordination sites of the metallocenes. Isotactic EPPE sequences are indicative of occasional multiple insertions at the stereospecific site, caused by an isomerization of the chain prior to monomer insertion (backskip).     

Alternating copolymerization of limonene oxide and carbon dioxide

The alternating copolymerization of (R)- or (S)-limonene oxide and CO2 using beta-diiminate zinc acetate catalysts is reported. At 100 psi CO2 and 25 degrees C, the catalyst exhibits a high selectivity for the trans isomer and produces regioregular polycarbonate. The copolymer contains >99% carbonate linkages, a narrow molecular weight distribution, and an Mn value consistent with the [epoxide]/[Zn] ratio.