Full Protection for Graphene‐Incorporated Micro‐/Nanocomposites Containing Ultra‐small Active Nanoparticles: the Best Li‐Storage Properties

In recent years, graphene‐incorporated micro‐/nanocomposites represent one of the hottest developing directions for the composite materials. However, a large number of active nanoparticles (NPs) are still in the unprotected state in most constructed graphene‐containing designs, which will seriously impair the effects of the graphene additives. Here, a fully protected Fe₃O₄‐based micro‐/nanocomposite (G/Fe₃O₄@C) is rationally developed by carbon‐boxing the common graphene/Fe₃O₄ microparticulates (G/Fe₃O₄). The processes and results of full protection are tracked in detail and characterized by X‐ray diffraction, X‐ray photoelectron spectroscopy, and nitrogen absorption–desorption isotherms, as well as scanning and transition electron microscopy. When used as the anode for lithium‐ion batteries, the fully protected G/Fe₃O₄@C exhibits the best lithium‐storage properties in terms of the highest rate capabilities and the longest cycle life compared to the common G/Fe₃O₄ composites and commercial Fe₃O₄ products. These much improved properties are mainly attributed to its novel structural features including complete protection of active Fe₃O₄ nanoparticles by the surface carbon box, a robust conductive network composed of nitrogen‐doped graphene nanosheets, ultra‐small Fe₃O₄ NPs of 4–5 nm, abundant mesopores to accommodate the volume variation during cycling, and micrometer‐sized secondary particles.     

New evidences of in situ laser irradiation effects on γ‐Fe2O3 nanoparticles: a Raman spectroscopic study

The nature of the physical mechanisms responsible for the structural modification of the γ‐Fe₂O₃ nanoparticles under laser irradiation has been investigated by Raman spectroscopy. In situ micro‐Raman measurements were carried out on as‐prepared γ‐Fe₂O₃ nanoparticles about 4 nm in size as a function of laser power and on annealed γ‐Fe₂O₃ particles. A baseline profile analysis clearly evidenced that the phase transition from maghemite into hematite is caused by local heating due to laser irradiation with an increase of grain size of nanoparticles. This increasing was clearly determined by X‐ray diffraction from 4 nm in nanoparticles up to more than 177 nm beyond 900 °C in a polycrystalline state. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and Characterization of La‐Doped Fe3O4‐Polyaniline Magnetic Response Nanocomposites

Lanathum (La)‐doped Fe₃O₄ magnetic nanoparticles were prepared in aqueous solution at room temperature, then La‐doped Fe₃O₄‐polyaniline (PANI) nanocomposites containing a dispersion of La‐doped Fe₃O₄ nanoparticles were synthesized via in‐situ polymerization of aniline monomer. The structure and properties of the synthesized samples were characterized with X‐ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectrometry (FTIR), thermogravimetric analysis (TGA), inductively coupled plasma atomic emission spectrometry (ICPAES), and a vibrating sample magnetometer (VSM). The resulting particles of La‐doped Fe₃O₄ and La‐doped Fe₃O₄‐PANI were almost spherical with diameters ranging from 15 to 25 nm and 25 to 85 nm, respectively. The La‐doped Fe₃O₄‐PANI composite presented core‐shell structures; polyaniline covered the La‐doped Fe₃O₄ completely. The specific saturation magnetization of La‐doped Fe₃O₄‐PANI depended on the starting material of La‐doped Fe₃O_4. It increased with increasing amounts of La and Fe₃O₄ content.     

Magnetic and rheological properties of monodisperse Fe3O4 nanoparticle/organic hybrid

Fe₃O₄ nanoparticle/organic hybrids were synthesized via hydrolysis using iron (III) acetylacetonate at ∼80 °C. The synthesis of Fe₃O₄ was confirmed by X-ray diffraction, selected-area diffraction, and X-ray photoelectron spectroscopy. Fe₃O₄ nanoparticles in the organic matrix had diameters ranging from 7 to 13 nm depending on the conditions of hydrolysis. The saturation magnetization of the hybrid increased with an increase in the particle size. When the hybrid contained Fe₃O₄ particles with a size of less than 10 nm, it exhibited superparamagnetic behavior. The blocking temperature of the hybrid containing Fe₃O₄ particles with a size of 7.3 nm was 200 K, and it increased to 310 K as the particle size increased to 9.1 nm. A hybrid containing Fe₃O₄ particles of size greater than 10 nm was ferrimagnetic, and underwent Verwey transition at 130 K. Under a magnetic field, a suspension of the hybrid in silicone oil revealed the magnetorheological effect. The yield stress of the fluid was dependent on the saturation magnetization of Fe₃O₄ nanoparticles in the hybrid, the strength of the magnetic field, and the amount of the hybrid.     

Phase transformations in CaCO3/iron oxide composite induced by thermal treatment and laser irradiation

Calcium carbonate (CaCO₃)/iron oxide composites were synthesized through a simple one‐step impregnation procedure by mixing iron oxide nanoparticles (γ‐Fe₂O₃ and Fe₃O₄) of about 6 nm in size and CaCO₃ microparticles (Φ = 2 µm–8 µm, vaterite phase). The morphology and structural properties of CaCO₃, iron oxide nanoparticles and CaCO₃/iron oxide composites were characterized as a function of low iron content (0 %w to 3.2 %w) by scanning electron microscopy and transmission electron microscopy, X‐ray diffraction and ⁵⁷Fe Mössbauer spectrometry. The phase transformations induced by thermal treatment and laser irradiation were investigated in situ by X‐ray thermodiffraction (XRTD) and Raman spectroscopy. We have shown that the phase transformations observed by XRTD are also observed under laser irradiation as a consequence of the absorption of the laser irradiation by iron oxide nanoparticles. Copyright © 2012 John Wiley & Sons, Ltd.     

Mössbauer study of a Fe3O4/PMMA nanocomposite synthesized by sonochemistry

Magnetite nanoparticles of 10 nm average size were synthesized by ultrasonic waves from the chemical reaction and precipitation of ferrous and ferric iron chloride (FeCl₃ · 6H₂O y FeCl₂ · 4H₂O) in a basic medium. The formation and the incorporation of the magnetite in PMMA were followed by XRD and Mössbauer Spectroscopy. These magnetite nanoparticles were subsequently incorporated into the polymer by ultrasonic waves in order to obtain the final sample of 5 % weight Fe₃O₄ into the polymethylmethacrylate (PMMA). Both samples Fe₃O₄ nanoparticles and 5 % Fe₃O₄/PMMA nanocomposite, were studied by Mössbauer spectroscopy in the temperature range of 300 K–77 K. In the case of room temperature, the Mössbauer spectrum of the Fe₃O₄ nanoparticles sample was fitted with two magnetic histograms, one corresponding to the tetrahedral sites (Fe^3?+?) and the other to the octahedral sites (Fe^3?+? and Fe^2?+?), while the 5 % Fe₃O₄/PMMA sample was fitted with two histograms as before and a singlet subspectrum related to a superparamagnetic behavior, caused by the dispersion of the nanoparticles into the polymer. The 77 K Mössabuer spectra for both samples were fitted with five magnetic subspectra similar to the bulk magnetite and for the 5 % Fe₃O₄/PMMA sample it was needed to add also a superparamagnetic singlet. Additionally, a study of the Verwey transition has been done and it was observed a different behavior compared with that of bulk magnetite.     

Synchrotron XANES and ED‐XRF analyses of fine‐paste ware from 13th to 14th century maritime Southeast Asia

The combination of energy dispersive X‐ray fluorescence (ED‐XRF) and synchrotron X‐ray absorption near‐edge structure (XANES) provides the detailed composition of fine‐paste ware (FPW) kendis, dated back to 13th–14th century maritime Southeast Asia. Sources of clay and production sites were classified according to Al₂O₃, SiO₂, α‐Fe₂O₃ and γ‐Fe₂O₃ as well as trace elements. The similarities based on these components provided another evidence of a trade route between Kota Cina in North Sumatra of Indonesia and Kok Moh on Satingphra Peninsula, a well‐known production area in present‐day Thailand. In additions, the uniquely large contribution of α‐Fe₂O₃ in XANES spectra suggests that Nakhon Si Thammarat province of Thailand could also be one of FPW production areas in maritime Southeast Asia. Copyright © 2017 John Wiley & Sons, Ltd.     

Monitoring by Mössbauer spectroscopy the thermal reduction of hematite into magnetite: the surface effect and charge disproportionality in iron oxide nanoparticles

Nanoparticles of magnetite Fe₃O₄ were synthesized by thermal reduction of hematite α-Fe₂O₃ powder in the presence of high boiling point solvent. The structural transformations and magnetic properties of the obtained nanoparticles were investigated by the ⁵⁷Fe Mössbauer spectroscopy, X-ray diffraction, and magnetic measurements. The content of hematite and magnetite phases was evaluated at each step of the chemical and thermal treatment of the product. An increase of saturation magnetization with the reaction time correlates with an increase of concentration of magnetite in the samples. The electron hoping between Fe^2?+? and Fe^3?+? ions in the octahedral sites of the magnetite nanoparticles and Verwey phase transition were investigated. It was established that not all iron ions in the octahedral sites participated in electron hoping Fe^2?+????Fe^3?+? above the Verwey temperature T _V, and the charge distribution could be expressed as $\big( {{\rm Fe}^{3+}}\big)_{{\rm tet}} \big[ {{\rm Fe}_{1.85}^{2.5+} {\rm Fe}_{0.15}^{3+} }\big]_{{\rm oct}} {\rm O}_4$ .     

Interface scattering and spin-dependent transport in granular magnetite

We have prepared nearly monodisperse Fe₃O₄ of ∼50 nm by a chemical route and investigated the electrical and magnetic transports of the composite granular system. A Verwey transition is observed in the vicinity of 113 K. Above and below the Verwey transition, the electrical transport is dominated by electron hopping behavior showing a good linear relation between resistance and T^−1/2. The magnetoresistance (MR) increases with the applied field and does not follow the magnetization to reach the saturation at 10 KOe field. This indicates that the MR is mainly arising from the spin-dependent scattering of electrons through the grain boundaries. The temperature dependence of MR shows it has the highest MR value near the Verwey transition.     

Investigation of nanoparticulate silicon as printed layers using scanning electron microscopy,transmission electron microscopy,X‐ray absorption spectroscopy and X‐ray photoelectron spectroscopy

The presence of native oxide on the surface of silicon nanoparticles is known to inhibit charge transport on the surfaces. Scanning electron microscopy (SEM) studies reveal that the particles in the printed silicon network have a wide range of sizes and shapes. High‐resolution transmission electron microscopy reveals that the particle surfaces have mainly the (111)‐ and (100)‐oriented planes which stabilizes against further oxidation of the particles. X‐ray absorption spectroscopy (XANES) and X‐ray photoelectron spectroscopy (XPS) measurements at the O 1s‐edge have been utilized to study the oxidation and local atomic structure of printed layers of silicon nanoparticles which were milled for different times. XANES results reveal the presence of the +4 (SiO₂) oxidation state which tends towards the +2 (SiO) state for higher milling times. Si 2p XPS results indicate that the surfaces of the silicon nanoparticles in the printed layers are only partially oxidized and that all three sub‐oxide, +1 (Si₂O), +2 (SiO) and +3 (Si₂O₃), states are present. The analysis of the change in the sub‐oxide peaks of the silicon nanoparticles shows the dominance of the +4 state only for lower milling times.     

Preparation and characterization of silicon oil based ferrofluid

Stable silicon oil based ferrofluid was prepared in the present investigation. Silicon oil surfactant ethoxy terminated polydimethylsiloxane was used to modify the Fe₃O₄ nanoparticles. The Fe₃O₄ nanoparticles were firstly coated with a SiO₂ layer by the hydrolysis of tetraethoxysilane. Then using the active hydroxyl groups on the surface of the SiO₂, silicon oil surfactant was covalently grafted onto the Fe₃O₄ nanoparticles surface. The ethoxy terminated polydimethylsiloxane has similar molecular chain structure and good compatibility with that of the carrier liquid, thus ensuring stable dispersion of modified Fe₃O₄ in the carrier silicon oil. The interaction between Fe₃O₄ and the modifier was characterized by IR and XPS. The crystal structure and the magnetic properties of the Fe₃O₄ nanoparticles were determined by XRD and VSM, respectively. The size and morphology of the particles were observed using TEM. The properties of the silicon oil based ferrofluid were characterized by Gouy magnetic balance. The results indicated that the ferrofluid had high magnetism and good stability. The rheological properties and thermostability of the ferrofluid were also investigated.     

Magnetic properties of SiO2-coated iron oxide nanoparticles studied by polarized small angle neutron scattering

The structural and magnetic properties of non-coated and SiO₂-coated iron oxide (Fe₃O₄) nanoparticles (NPs) were investigated by a polarized small-angle neutron scattering (P-SANS) method. Measurement of the P-SANS allowed us to obtain nuclear and magnetic scattering cross sections of the NPs under applied magnetic field. The analysis of the scattering intensity provided the structural parameters and the spatial magnetization distribution of the non-coated and the SiO₂ coated core–shell NPs. The measured radius of both NPs and the shell thickness of the core–shell NPs were in consistent with those measured by the transmission electron microscopy. In comparison, the magnetic core radii of both NPs were 0.12–0.6 nm smaller than the nuclear radii, indicating the magnetization reduction in the surface region of core Fe₃O₄ in both NPs. However, the reduced magnetization region, which is the surface spin canting region, of the SiO₂-coated NPs was relatively narrower than that of the non-coated NPs. We suggest that the SiO₂ coating on the Fe₃O₄ NPs may stabilize the spin order of atoms and prohibit the oxidation or defect formation at the surface region of the Fe₃O₄ NPs, and enhance the corresponding magnetization of the Fe₃O₄ NPs by the reduction of the spin canting layer thickness.     

Conductivity and specific heat anomalies at the low temperature transition in the stoichiometric YFe2O4

Anomalies were found in electrical conductivity and specific heat at the two-step transition in the stoichiometric YFe₂O₄. It is concluded that the transition is a new type of Verwey transition: i.e., ordering of ionic charge, Fe²⁺ and Fe³⁺, accompanied by lattice distortion and antiferromagnetic spin ordering.     

Magnetic characterization of surface-coated magnetic nanoparticles for biomedical application

The influence of the oleic acid surface coating on Fe₃O₄ and NiFe₂O₄ nanoparticles on their magnetic and calorimetric characterization was investigated. Fe₃O₄ nanoparticles (particle sizes of 15-20 and 20-30 nm) and NiFe₂O₄ nanoparticles (particle sizes of 20-30 nm) were dispersed in oleic acid. The surface coating resulted in a decrease in the dipole-dipole interaction between the particles, which in turn affected the coercivity and heat dissipation of the nanoparticles. The coercivity of the oleic-acid-coated nanoparticles was found to be lower than that of the uncoated nanoparticles. The temperature rise in the oleic-acid-coated nanoparticles was greater than that of the uncoated nanoparticles; this temperature rise was associated with the relaxation losses. The viscosity dependence on the self-heating temperature of Fe₃O₄ nanoparticles (15-20 and 20-30 nm) under an ac magnetic field was measured. The temperature rise for both the Fe₃O₄ nanoparticles (15-20 and 20-30 nm) exhibited a strong dependence on viscosity at each magnetic field frequency, and the contribution of Brownian relaxation loss to the temperature rise was revealed. Moreover, an in vitro cytotoxicity test of Fe₃O₄ and NiFe₂O₄ was performed using human cervical carcinoma cells (HeLa), and the cytotoxicity of NiFe₂O₄ nanoparticles was compared to that of Fe₃O₄ nanoparticles.     

The Study of Aggregation Processes in Colloidal Solutions of Magnetite–Silica Nanoparticles by NMR Relaxometry,AFM, and UV–Vis-Spectroscopy

Colloidal solutions of magnetic nanoparticles were studied as a promising magnetic resonance imaging (MRI) contrast agent. The problem of aggregative stability of solutions is considered. Sol-gel synthesis of magnetite colloidal solutions stabilized by silica is described. Transmittance spectra were measured to analyze sedimentation of nanoparticles in magnetite–silica solutions of different compositions and concentrations. It is shown that the synthesized nanoparticles can be used as MRI contrast agents. The surface morphology and particle size of Fe₃O₄/SiO₂ layers were estimated by atomic force mictroscopy (AFM) technique. The mechanism of magnetic-field-induced aggregation of Fe₃O₄/SiO₂ nanoparticles into chain-like and fractal structures is described.     

Magnetoresistive properties of Fe3O4 nanoparticles embedded in a Cu matrix

We studied ordered arrays of magnetic nanoparticles (NPs) in a nonmagnetic matrix. The influence of annealing temperature and measurement geometry (varying angle between sample surface and external magnetic field direction) on magnetoresistance and coercive field values was established. Measurements were done on the Au(2 nm)/Cu(20 nm)/Fe₃O₄(NPs)/SiO₂/Si system.     

Surface EXAFS via differential electron yield

Surface‐sensitive analysis via extended X‐ray absorption fine‐structure (EXAFS) spectroscopy is demonstrated using a thickness‐defined SiO₂ (12.4 nm)/Si sample. The proposed method exploits the differential electron yield (DEY) method wherein Auger electrons escaping from a sample surface are detected by an electron analyzer. The DEY method removes local intensity changes in the EXAFS spectra caused by photoelectrons crossing the Auger peak during X‐ray energy sweeps, enabling EXAFS analysis through Fourier transformation of wide‐energy‐range spectral oscillations. The Si K‐edge DEY X‐ray absorption near‐edge structure (XANES) spectrum appears to comprise high amounts of SiO₂ and low Si content, suggesting an analysis depth, as expressed using the inelastic mean free path of electrons in general electron spectroscopy, of approximately 4.2 nm. The first nearest neighbor (Si—O) distance derived from the Fourier transform of the Si K‐edge DEY‐EXAFS oscillation is 1.63 Å. This value is within the reported values of bulk SiO₂, showing that DEY can be used to detect a surface layer of 12.4 nm thickness with an analysis depth of approximately 4.2 nm and enable `surface EXAFS' analysis using Fourier transformation.     

Microwave synthesis of magnetic Fe3O4 nanoparticles used as a precursor of nanocomposites and ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the surface of particles are presented in the present investigation. Fe₃O₄ magnetic nanoparticles were prepared by the co-precipitation of Fe³⁺ and Fe²⁺, NH₃·H₂O was used as the precipitating agent to adjust the pH value, and the aging of Fe₃O₄ magnetic nanoparticles was accelerated by microwave (MW) irradiation. The obtained Fe₃O₄ magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The average size of Fe₃O₄ crystallites was found to be around 8–9 nm. Thereafter, the surface of Fe₃O₄ magnetic nanoparticles was modified by stearic acid. The resultant sample was characterized by FT-IR, scanning electron microscopy (SEM), XRD, lipophilic degree (LD) and sedimentation test. The FT-IR results indicated that a covalent bond was formed by chemical reaction between the hydroxyl groups on the surface of Fe₃O₄ nanoparticles and carboxyl groups of stearic acid, which changed the polarity of Fe₃O₄ nanoparticles. The dispersion of Fe₃O₄ in organic solvent was greatly improved. Effects of reaction time, reaction temperature and concentration of stearic acid on particle surface modification were investigated. In addition, Fe₃O₄/polystyrene (PS) nanocomposite was synthesized by adding surface modified Fe₃O₄ magnetic nanoparticles into styrene monomer, followed by the radical polymerization. The obtained nanocomposite was tested by thermogravimetry (TG), differential scanning calorimetry (DSC) and XRD. Results revealed that the thermal stability of PS was not significantly changed after adding Fe₃O₄ nanoparticles. The Fe₃O₄ magnetic fluid was characterized using UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the magnetic fluid had excellent stability, and had susceptibility of 4.46×10⁻⁸ and saturated magnetization of 6.56 emu/g. In addition, the mean size d (0.99) of magnetic Fe₃O₄ nanoparticles in the fluid was 36.19 nm.     

Deposition of ZnO Nanocrystals on Fe3O4 Nanocubes and Their Special Luminescent and Magnetic Properties

With increasing miniaturization, it is extremely important to maintain the magnetization stability at small scale. Herein, more efforts and interests focus on the interface of magnetic core and semiconductor shell to obtain desired magnetic and/or luminescent properties. Here, Fe₃O₄ nanocubes are synthesized via a thermal decomposition followed by coating ZnO nanocrystals. To create a large interface, large Fe₃O₄ nanocubes with 78 ± 3 nm average side‐length are synthesized through adjusting the ratio of iron precursor to stabilizer. The average diameter of the particular ZnO nanostructures coated on the nanocubic Fe₃O₄ is around 10 ± 2 nm. In addition to the photoluminescent properties of the ZnO‐coated nanostructures, core‐shell Fe₃O₄@ZnO nanostructures demonstrate enhanced UV absorption at 360 nm, which has a 20 nm blueshift compared to bulk ZnO. The superparamagnetic properties of Fe₃O₄@ZnO core–shell hybrid nanocrystals at room temperature are dominated by the ferromagnetic properties when the temperature is lower than the Blocking temperature, 235.7 K. The observed exchange bias and temperature‐dependent magnetization can result from the interfacial interphase between ZnO and Fe₃O₄. The anisotropy contributed by the interfacial interphase allows the nanostructures to maintain stable magnetization in miniaturized devices.     

Preparation and characterization of Fe3O4 magnetic composite microspheres covered by a P(MAH-co-MAA) copolymer

A magnetic core–shell-layered polymer microsphere (MPS) was successfully synthesized by a dispersion polymerization route, where the modified Fe₃O₄ nanoparticles (MFN) were used as a core, while poly(maleic anhydride-co-methacrylic acid) P(MAH-co-MAA) as a shell was covered on the surface of the Fe₃O₄ nanoparticles. Environmental scanning electron microscope (ESME) and transmission electron microscope (TEM) measurements indicate that the magnetic P(MAH-co-MAA)/Fe₃O₄ composite microspheres assume sphericity and have a novel core–shell-layered structure. The crystal particle sizes of the unimproved Fe₃O₄ and the MFN samples vary from 8 to 16 nm in diameter, and the average size is about 10.6 nm in diameter. The core–shell magnetic composite microspheres can be adjusted by changing the stirring speed. Since multiple Fe₃O₄ cores were coated with a proper percentage of P(MAH-co-MAA) copolymers, and therefore lower density was acquired for the MPS, which improved sedimentation and dispersion behavior. The saturated magnetization of pure Fe₃O₄ nanoparticles reaches 48.1 emu g⁻¹ and the value for composite nanoparticles was as high as 173.5 emu g⁻¹. The nanoparticles show strong superparamagnetic characteristics and can be expected to be used as a candidate for magnetism-controlled drug release.