超高效液相色谱-大气压化学电离-三重四极杆质谱联用法快速测定食品中苯并[a]芘

建立了快速检测食品中苯并[a]芘的超高效液相色谱-三重四极杆质谱联用(UPLC-MS/MS)分析方法。样品用正己烷提取后,经分子印迹固相萃取柱净化,以甲醇和水作为流动相进行梯度洗脱,在XBridge BEH C18柱上实现分离,大气压化学电离(APCI)-三重四极杆质谱正离子MRM方式检测,以苯并[a]芘-d12作为内标的稳定同位素稀释法定量。方法的线性范围为0.07~50μg/kg,定量限为0.07μg/kg。平均加标回收率为86%~104%,相对标准偏差为2.3%~14%。该方法灵敏、准确,适用于食品中苯并[a]芘的测定,已应用于实际样品的检查。     

高效液相色谱-荧光检测法测定螺旋藻中苯并[a]芘残留

建立了高效液相色谱-荧光检测法测定螺旋藻中苯并[a]芘残留的分析方法。螺旋藻样品用正己烷提取,经中性Al2O3固相萃取(SPE)柱净化。用Zorbax Eclipse XDB-C18色谱柱分离,流动相为乙腈-水(85∶15,V/V),流速1.0mL/min,荧光检测器检测。苯并[a]芘的质量浓度在0~20ng/mL范围内线性关系良好,相关系数r=0.9999,检出限为0.12μg/kg,定量限为0.40μg/kg,回收率为96.60%~101.2%,相对标准偏差为1.38%~5.68%。该方法准确,灵敏度高,重复性好,适用于螺旋藻中苯并[a]芘残留的测定。     

固相萃取/高效液相色谱荧光法测定草珊瑚中苯并[α]芘残留

采用固相萃取方法,建立了草珊瑚中苯并[α]芘的高效液相色谱荧光测定方法。以正己烷为提取溶剂对草珊瑚样品进行提取,经中性氧化铝固相萃取柱净化样品后,用高效液相色谱荧光检测器检测,荧光检测器激发波长为370 nm,发射波长为425 nm,流动相为乙腈-水(85∶15),流速为1.0 m L/min。结果表明:苯并[α]芘在0~20 ng/m L浓度范围内线性关系良好,相关系数(r)为0.999 9,定量下限为0.36μg/kg,回收率为84.4%~101.9%,相对标准偏差(RSD)为1.6%~5.6%。该方法准确,灵敏度高,重复性好,适用于植物药材中苯并[α]芘残留的测定。     

分散式固相萃取结合高效液相色谱法快速测定油脂制品中苯并(a)芘

1引言苯并(a)芘(BaP)具有强致癌和致突变作用[1]。油脂制品中的苯并(a)芘主要源自不合理的加工方式:如温度过高的油料焙炒、高温压榨等工艺过程均可导致油脂受热分解,环化聚合生成苯并(a)芘[2]。目前,关于食品中苯并(a)芘较为普遍的检测方法主要有薄层色谱法[3]、高效液相色谱法(HPLC)[4]、气相色谱-质谱法[5]等。提取净化方法主要有凝胶渗透色谱法[6]、液液萃取法[7]、固相萃取法[8]、层析柱法等[9]。本研究采用高效液相色谱荧光检测法,应用分散式固     

固相萃取新装置净化-超高效液相色谱法测定卷烟主流烟气中的苯并[α]芘

研究了用正相固相萃取净化,超高效液相色谱测定卷烟主流烟气中苯并[α]芘的方法。捕集有卷烟主流烟气总粒相物的剑桥滤片置于自主设计的样品萃取瓶中,用环己烷-乙醇(95:5,V/V)超声振荡萃取,提取液用硅胶固相萃取净化,然后以Waters ACQUITY UPLC BEH C18(2.1×50 mm,1.7μm)色谱柱为固定相,甲醇为流动相,超高效液相色谱-荧光检测测定;苯并[α]芘检出限为0.22 ng/支,样品加标回收率为89.6%~95.4%,日内相对标准偏差为3.2%,日间相对标准偏差为3.6%;结果令人满意。     

固相萃取/高效液相色谱法测定饮用水中苯并(a)芘及双酚A

建立了饮用水中苯并(a)芘(Bap)和双酚A(BPA)同时测定的固相萃取/高效液相色谱方法。水样中苯并(a)芘和双酚A经ENVI-18固相萃取小柱富集后,采用C18色谱柱分离,以乙腈-水为流动相,梯度洗脱,荧光检测器检测。结果表明,苯并(a)芘和双酚A在0.1~20.0μg/L浓度范围内线性关系良好,相关系数大于0.999,检出限分别为0.2 ng/L和2.0 ng/L,样品加标回收率为86.1%~101%,相对标准偏差为2.9%~4.6%。该方法灵敏度高,选择性好,方便快捷,适用于饮用水中苯并(a)芘和双酚A的测定。     

采用新型固相萃取柱快速测定食用植物油中苯并［a］芘

研究了Bond Elut ENV新型固相萃取柱在食用植物油中苯并[a]芘快速检测中的应用,建立了快速测定食用植物油样品中苯并[a]芘残留量的固相萃取/液相色谱/荧光检测法。样品用正己烷溶解,固相萃取净化,SUPELCOSILTMLC-PAH(25 cm×4.6 mm,5μm)色谱柱分离,以乙腈-水(95∶5)为流动相,荧光检测(λex=297 nm,λem=408 nm),外标法定量。苯并[a]芘的检出限为0.3μg/kg,在1.0～50.0μg/L范围内线性关系良好,相关系数为0.999 6,方法的回收率为79%～102%,相对标准偏差不高于9.4%。该方法准确、实用、简便、快速,在食用植物油的苯并[a]芘残留量检测方面有广泛的应用前景。     

高效液相色谱-荧光检测法测定橄榄油中4种多环芳烃

建立了高效液相色谱-荧光检测(HPLC-FLD)测定橄榄油中苯并[a]蒽、屈艹、苯并[b]荧蒽、苯并[a]芘4种多环芳烃(PAHs)的分析方法。橄榄油样品经异丙醇稀释,采用具有π-π特异性作用的固相萃取柱净化,Agilent ZORBAX Eclipse PAH色谱柱(100 m m×2.1 m m,1.8μm)分离,以水-乙腈为流动相,梯度洗脱,实现了4种化合物的基线分离,并用基质匹配校准溶液进行外标法定量。4种多环芳烃的线性范围为2.4~40μg/L,相关系数(r)为0.999 0~0.999 9,方法的定量限为0.147~0.413μg/L,加标回收率为95.5%~103.2%,日内和日间精密度(RSD)分别为0.10%~1.69%和2.48%~2.93%(n=5)。该法具有灵敏度高、检出限低、重复性好等特点,适用于橄榄油中4种PAHs快速、准确的定量检测。     

高效液相色谱法测定煤沥青中16种多环芳烃

建立了煤沥青中苯并[a]蒽、苯并[a]芘等16种多环芳烃(PAHs)的高效液相色谱分离检测方法。以甲苯为溶剂对煤沥青进行萃取,萃取液处理后经柱层析分离,层析洗脱液分组回收,然后进行液相色谱分析。采用ZORBAX Eclipse PAH柱分离,以乙腈-水为流动相进行梯度洗脱,紫外检测器进行测定。结果表明,16种PAHs的线性范围为0.5~20 mg/L,相关系数(r)均大于0.999,检出限为0.0031~0.035μg/L,方法的回收率为97.2%~108.3%,相对标准偏差(RSD)为0.18%~3.5%。方法用于两种不同煤沥青中16种PAHs含量的测定,两种煤沥青中16种PAHs的含量分别为107.86 g/kg和103.71 g/kg,其中苯并[a]芘的含量分别为11.86 g/kg和13.82 g/kg。     

在线液相-气相二维色谱测定卷烟主流烟气中的苯并[a]芘

建立了在线液相-气相二维色谱测定卷烟主流烟气中的苯并[a]芘方法.采用剑桥滤片捕集烟气粒相物,环己烷萃取,以D12-苯并[a]芘为内标,然后用在线液相-气相二维色谱测定:样品直接进样进入液相色谱,经微型硅胶柱分离,含苯并[a]芘的部位切割进人气相色谱,排干溶剂后启动气相色谱升温,经毛细管柱进行分离,用质谱检测.本方法将烟气苯并[a]芘测定中的硅胶柱层析和气相色谱-质谱分析在线连接起来,可不经样品前处理净化直接进样分析;而且每次进样可达40 μL,与常规气相色谱-质谱分析最大进样2.0 μ.L相比,分析灵敏度提高了20倍.方法线性范围达0.08～ 50 ng/L,相关系数为r2=0.999,回收率为94.2％～105.5％;检出限和定量限分别为0.09和0.30 ng/支,应用本方法对14个不同类型市售卷烟和2R4F标准烟进行了测定,结果与GB/T21130-2007测定结果相符合.     

Identification and quantification of urinary benzo[a]pyrene and its metabolites from asphalt fume exposed mice by microflow LC coupled to hybrid quadrupole time-of-flight mass spectrometry

Prolonged, extensive exposure to asphalt fume has been associated with several adverse health effects. Inhaled polycyclic aromatic hydrocarbons (PAHs) from asphalt fume exposure have been suspected of inducing such effects. In this study, a bioanalytical method was proposed and evaluated to identify and quantify benzo[a]pyrene and its hydroxy-metabolites. This method is based on coupling a microflow liquid chromatography (LC) to a hybrid quadrupole orthogonal acceleration time-of-flight mass spectrometry (Q-TOFMS). In the experiment, thirty-two B6C3FI mice were exposed to asphalt fume in a whole body inhalation chamber for 10 days (4 h day(-1)) and twelve other mice were used as controls. The asphalt fume was generated at 180 degrees C and the concentrations in the animal exposure chamber ranged 175-182 mg m(-3). Benzo[a]pyrene and its metabolites of 3-hydroxybenzo[a]pyrene, benzo[a]pyrene-7,8-dihydrodiol(+/-), benzo[a]pyrene-7,8-dihydrodiol-9,10-epoxide(+/-), and benzo[a]pyrene-7,8,9,10-tetrahydrotetrol(+/-) in the urine of asphalt fume exposed mice were identified and found at 3.18 ng 100 mL(-1), 31.36 ng 100 mL(-1), 11.56 ng 100 mL(-1), 54.92 ng 100 mL(-1), and 45.23 ng 100 mL(-1) respectively. The results revealed that the urinary benzo[a]pyrene and its hydroxy-metabolites from exposed mice were at significantly higher levels (p < 0.001) than those from the control groups. Compared with several other technologies such as HPLC-UV and HPLC-fluorescence, the new method is more sensitive and selective, and it can also provide additional useful information on the structures of the metabolites. Hence, this method can be used to perform the assessment and to study the mechanisms of the adverse health effects. The fragmentation patterns established in this study can also be used to identify and quantify PAH metabolites in other biological fluids.     

磁性微孔聚合物富集/表面增强拉曼光谱法测定水与土壤中多环芳烃

建立了磁性聚亚苯基共轭微孔聚合物富集/表面增强拉曼光谱法测定水样和土壤中4种多环芳烃的分析方法。待测物经磁性聚亚苯基共轭微孔聚合物吸附萃取,甲醇洗脱后进行SERS检测。结果表明,蒽、芘、荧蒽和苯[α]芘在0.1~10μg/L范围内与其SERS特征峰峰强呈良好的线性关系,检出限为0.03μg/L,回收率为71.6%~115.8%,相对标准偏差不大于13.7%。该分析方法灵敏度高,能够满足实际水样和土壤中4种多环芳烃同时检测的要求。     

Admicelle-enhanced synchronous fluorescence spectrometry for the selective determination of polycyclic aromatic hydrocarbons in water

A simple and rapid method for the highly sensitive determination of polycyclic aromatic hydrocarbons (PAHs) in water was developed. Benzo[a]pyrene, benzo[k]fluoranthene, perylene, and pyrene in water were concentrated into sodium dodecyl sulfate (SDS)-alumina admicelles. The collection was performed by adding SDS and alumina particles into the sample solution at pH 2. After gentle mixing, the resulting suspension was passed through a membrane filter to collect the SDS admicelles containing highly concentrated PAHs. The filter was placed on a slide glass and then covered admicellar layer with a fused silica glass plate before setting in a fluorescence spectrometer. Benzo[a]pyrene, benzo[k]fluoranthene, perylene, and pyrene were selectively determined by the synchronous fluorescence scan (SFS) analysis with keeping wavelength intervals between excitation and emission to 98, 35, 29, and 45 nm, respectively. Because of the minimum spectral overlapping, 1-40 ng l⁻¹ of benzo[a]pyrene, benzo[k]fluoranthene, and perylene as well as 10-150 ng l⁻¹ of pyrene were selectively determined with eliminating the interferences of other 12 PAHs. The detection limits were 0.3 ng l⁻¹ for benzo[a]pyrene, benzo[k]fluoranthene, and perylene, and 1 ng l⁻¹ for pyrene. They were 2-3 orders of magnitude lower than the detection limits in normal aqueous micellar solutions. The application to water analysis was studied.     

Method validation for determination of the 15 European-priority polycyclic aromatic hydrocarbons in primary smoke condensates by gas chromatography/mass spectrometry: interlaboratory study

A collaborative study was conducted to validate an analytical method for quantification of the 15 polycyclic aromatic hydrocarbons (PAHs) regarded in 2002 as a health concern by the former Scientific Committee on Food of the European Commission (SCF) in primary smoke condensates. The method is based on gas chromatography/mass spectrometry of a cyclohexane extract with solid-phase cleanup through silica gel. The analytes were detected in the selected-ion monitoring mode and quantified by using 3 isotopically labeled internal standard compounds. Seventeen laboratories participated in the collaborative validation study, of which 12 reported valid results. The data were subjected to Cochran, single Grubbs, and double Grubbs tests for statistical outliers. A maximum of 2 outliers was eliminated before further statistical evaluation of the method performance characteristics. Depending on the analyte, the results showed relative standard deviations for repeatability between 4.2 and 30% and for reproducibility from 9.9 to 60%. The recoveries varied between about 50 and 85%, except those for cyclopenta[cd]pyrene, dibenzo[a,l]pyrene, and dibenzo[a,h]pyrene. Nevertheless, because Commission Directive 2005/10/EC allows for a recovery range of 50-120% for (BaP) benzo[a]pyrene in various foods, it can be concluded that the method performs appropriately within the analytical range between 5 and 25 microg/kg of primary smoke condensate. For BaP the validated analytical range covered 5-20 microg/kg, and for benzo[a]anthracene (BaA) 10-25 microg/kg. The method is suitable for monitoring BaP and BaA at their respective maximum permitted levels of 10 and 20 microg/kg. Three analytes, benzo[b]-, benzo[j]-, and benzo[k]-fluoranthene could not be separated by all of the participants and were therefore treated as the sum. Nevertheless, with this method the pattern of the respective concentrations of these 15 PAHs can be monitored in primary smoke condensate as suggested by the SCF.     

腐殖酸磁固相萃取与高效液相色谱-荧光检测联用测定食用油中的苯并芘

采用简单的混合研磨方法制备磁性腐殖酸(MHAS)复合材料,并将其作为磁固相萃取的吸附剂选择性分离和富集食用油脂中的苯并芘(BaP)。结合高效液相色谱-荧光检测法(HPLC-FLD),建立了食用油中BaP检测的新方法。该方法整个样品前处理过程在15min内即可完成,对目标物BaP的检测限低至0.04ng/g,在0.1~100ng/g范围内线性良好(R=0.999),日内(n=5)和日间(n=3)相对标准偏差分别小于3.5%和15.8%。将该方法应用于多种食用油中BaP的检测,每种食用油中均有不同含量的BaP被检出,对12种常见食用油的加标回收率在74.2%至120.6%之间,相对标准偏差小于11.0%。     

改进的QuEChERS-液相色谱法检测蔬菜中的苯并(α)芘

采用改进的QuEChERS,对蔬菜样品进行提取、净化,用高效液相色谱仪/荧光检测器检测,建立了蔬菜中苯并(α)芘的测定方法.样品用乙腈提取,PSA+中性Al2O3小柱净化,以10mL正己烷-乙腈(95:5,体积比)洗脱小柱,外标法定量.苯并(α)芘的含量在1.0～20.0μg/kg范围内与峰面积呈良好线性,相关系数(r...     

Determination of Polycyclic Aromatic Hydrocarbons in Airborne Particulate by High Performance Liquid Chromatography

This paper presents a trisolvent ultrasonic extraction and HPLC analysis method for the determination of 11 polycyclic aromatic hydrocarbons in air particulate collected on an air filter by a commercial high volume air sampler. A reverse phase column, Vydac 201 TP, and a gradient mobile phase, acetonitrile/water, were used. The 11 PAHs, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a, h]anthracene, benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and coronene were completely resolved under experimental conditions. All the PAHs except coronene were monitored by fluorescence with λ_ex=270 nm, λ_em>389 nm. Coronene was monitored by UV with λ=300 nm. The methodology was evaluated by spiking SRM 1649 with a PAH standard and then going through different extraction procedures and analyzing the PAH concentrations without clean-up. An external standard method was used for quantitation. The recovery yields for fluoranthene, benz[a]anthracene, benzo[a]pyrene, benzo[ghi]perylene and indeno[l,2,3-cd]pyrene were above 90%. The detection limits of PAH with fluorescence at λ_ex=270 nm, λ_em>389 nm ranged from 5.7 pg to 69.5 pg.     

Validation of a method for extraction of polycyclic aromatic hydrocarbons from sewage sludge and analysis by GC-MS

In the present study, the solid–liquid extraction with low temperature purification was validated for the determination of 16 polycyclic aromatic hydrocarbons from sewage sludge by gas chromatography-mass spectrometry. Recoveries ranged 70–114% for naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene and chrysene, while the compounds benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, dibenzo[a,h]anthracene and benzo[g,h,i]perylene showed recoveries of between 40 and 70%. The relative standard deviation was less than 13% for all of the compounds. Negative matrix effect was observed on the 10 compounds with less retention time in the chromatographic analysis and positive matrix effect noticed on the others. The limits of quantification were from 2 to 20 μg kg^?1, about 30 times less than the maximum residue limit allowed in sludge by the European Union. The validated method produced quantification of 11 PAHs in one sludge sample at concentrations ranging 20–2000 μg kg^?1.     

Resolution of 13 polycyclic aromatic hydrocarbons by constant-wavelength synchronous spectrofluorometry.

A method capable of determining 13 PAHs (acenaphthene, anthracene, benzo[a]anthracene, benzo[a]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, chrysene, dibenzo[ah]anthracene, fluoranthene, fluorene, indene[1,2,3-cd]pyrene, phenanthrene and pyrene) in a mixture of 16 EPA PAHs by second derivative synchronous spectrofluorometry in the constant wavelength mode was developed. It has not been possible to determine the following PAHs in the mixture: acenaphthylene, benzo[ghi]perylene and naphthalene. The approach studied allows the sensitive, rapid and inexpensive identification and quantitation of 13 PAHs in a solution of hexane. The detection limits are <1 microg L(-1) (except for chrysene and phenanthrene).