Transport properties of solid polymer electrolytes prepared from oligomeric fluorosulfonimide lithium salts dissolved in high molecular weight poly(ethylene oxide)

Transport properties such as ionic conductivity, lithium transference number, and apparent salt diffusion coefficient are reported for solid polymer electrolytes (SPEs) prepared using several oligomeric bis[(perfluoroalkyl)sulfonyl]imide (fluorosulfonimide) lithium salts dissolved in high molecular weight poly(ethylene oxide) (PEO). The salt series consists of polyanions in which two discrete fluorosulfonimide anions are linked together by [(perfluorobutylene)disulfonyl]imide linker chains. The restricted diffusion technique was used to measure the apparent salt diffusion coefficients in SPEs, and cationic transference numbers were determined using both potentiostatic polarization and electrochemical impedance spectroscopy methods. A general trend of diminished salt diffusion coefficient with increasing anion size was observed and is opposite to the trend observed in ionic conductivity. This unexpected finding is rationalized in terms of the cumulative effects of charge carrier concentration, anion mobility, ion pairing, host plasticization by the anions, and salt phase segregation on the conductivity.     

Enhanced Lithium‐Ion Conductivity of Polymer Electrolytes by Selective Introduction of Hydrogen into the Anion

The anion chemistry of lithium salts plays a pivotal role in dictating the physicochemical and electrochemical performance of solid polymer electrolytes (SPEs), thus affecting the cyclability of all‐solid‐state lithium metal batteries (ASSLMBs). The bis(trifluoromethanesulfonyl)imide anion (TFSI^?) has long been studied as the most promising candidate for SPEs; however, the Li‐ion conductivities of the TFSI‐based SPEs still remain low (Li‐ion transference number: ca. 0.2). In this work, we report new hydrogen‐containing anions, conceived based on theoretical considerations, as an electrolyte salt for SPEs. SPEs comprising hydrogen‐containing anions achieve higher Li‐ion conductivities than TFSI‐based ones, and those anions are electrochemically stable for various kinds of ASSLMBs (Li–LiFePO₄, Li–S, and Li–O₂ batteries). This opens up a new avenue for designing safe and high‐performance ASSLMBs in the future.     

聚氧化乙烯基聚合物电解质中离子缔合与结晶状态的傅立叶变换红外光谱(FTIR)研究

通过FTIR光谱技术对P(EO)_nLiX [X＝N(SO₂CF₃)₂, SCN, ClO₄] (n＝4～60)聚合物电解质的离子缔合行为进行了研究, 结果表明在PEO-LiSCN体系中缔合现象较为严重. 在高浓度时LiSCN主要以离子对、离子簇以及二聚体形式存在, 自由离子含量较少. 而对于LiTFSI和LiClO₄体系, 则以自由离子形式为主. 随着锂盐的加入, 由于其阴离子的增塑作用使聚氧化乙烯(PEO)中的晶相成分逐渐向无定形相转化. 当锂盐含量增加到一定程度, 体系中会有不同晶相复合物的形成.     

Comparison of Li+‐ion conductivity in linear and crosslinked poly(ethylene oxide)

Polymer electrolytes are of tremendous importance for applications in modern lithium‐ion (Li⁺‐ion) batteries due to their satisfactory ion conductivity, low toxicity, reduced flammability, as well as good mechanical and thermal stability. In this study, the Li⁺‐ion conductivity of well‐defined poly(ethylene oxide) (PEO) networks synthesized via copper(I)‐catalyzed azide–alkyne cycloaddition is investigated by electrochemical impedance spectroscopy after addition of different lithium salts. The ion conductivity of the network electrolytes increases with increasing molar mass of the PEO chains between the junction points which is completely opposite to the behavior of their respective uncrosslinked linear precursors. Obviously, this effect is directly related to the segmental mobility of the PEO chains. Furthermore, the ion conductivity of the network electrolytes under investigation increases also with increasing size of the anion of the added lithium salt due to a weaker anti‐plasticizing effect of the more bulky anions. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 21–28     

Quantum mechanical insight into the Li-ion conduction mechanism for solid polymer electrolytes

Ion transport in polymeric electrolytes (PEs) has been studied for approximately a half century, yet the ion conduction mechanism in the PEs is not fully understood. Herein, we report a new approach to understand the ion migration process in poly (ethylene oxide)/Lithium bis(trifluoromethane sulphonyl) imide (PEO/LiTFSI) and poly (ethylene oxide)/Lithium bis(oxalate) borate (PEO/LiBOB) electrolytes based on quantum mechanics. The results show that the coefficient of determination (R²) obtained from the new model exceeds 0.99 for all the PEs, which is far higher than these obtained from the well-known Arrhenius and Vogel-Tammann-Fulcher (VTF) equations. The wavelength (λ_Li+) of Li-ion migrations or the distance between the occupied site and the neighboring partially-occupied site is the most crucial factor to affect the ionic conductivity of PEs. The higher the λ_Li+, the better the ionic conductivity. The maximum λ_Li+ value of the PEs approximates angstrom order of magnitude. The developed ion conduction model opens an avenue to design PEs with a higher ionic conductivity.     

On the way to high-conductivity single lithium-ion conductors

Solid electrolytes can potentially address three key limitations of the organic electrolytes used in today’s lithium-ion batteries, namely, their flammability, limited electrochemical stability and low cationic transference number. The pioneering works of Wright and Armand, suggesting the use of solid poly(ethylene oxide)-based polymer electrolytes (PE) for lithium batteries, paved the way to the development of solid-state batteries based on PEs. Yet, low cationic mobility–low Li⁺ transference number in polymer materials coupled with sufficiently high room-temperature conductivity remains inaccessible. The current strategies employed for the production of single-ion polymer conductors include designing new lithium salts, bonding of anions with the main polyether chain or incorporating them into the side chains of comb-branched polymers, plasticizing, adding inorganic fillers and anion receptors. Glass and crystalline superionic solids are classical single-ion-conducting electrolytes. However, because of grain boundaries and poor electrode/electrolyte interfacial contacts, achieving electrochemical performance in solid-state batteries comprising polycrystalline inorganic electrolytes, comparable to the existing batteries with liquid electrolytes, is particularly challenging. Quasi-elastic polymer-in-ceramic electrolytes provide good alternatives to the traditional lithium-ion-battery electrolytes and are believed to be the subject of extensive current research. This review provides an account of the advances over the past decade in the development of single-ion-conducting electrolytes and offers some directions and references that may be useful for further investigations.     

Single Lithium‐Ion Conducting Polymer Electrolytes Based on a Super‐Delocalized Polyanion

A novel single lithium‐ion (Li‐ion) conducting polymer electrolyte is presented that is composed of the lithium salt of a polyanion, poly[(4‐styrenesulfonyl)(trifluoromethyl(S‐trifluoromethylsulfonylimino)sulfonyl)imide] (PSsTFSI^?), and high‐molecular‐weight poly(ethylene oxide) (PEO). The neat LiPSsTFSI ionomer displays a low glass‐transition temperature (44.3 °C; that is, strongly plasticizing effect). The complex of LiPSsTFSI/PEO exhibits a high Li‐ion transference number (t_Li⁺=0.91) and is thermally stable up to 300 °C. Meanwhile, it exhibits a Li‐ion conductivity as high as 1.35×10^?4 S cm^?1 at 90 °C, which is comparable to that for the classic ambipolar LiTFSI/PEO SPEs at the same temperature. These outstanding properties of the LiPSsTFSI/PEO blended polymer electrolyte would make it promising as solid polymer electrolytes for Li batteries.     

Li+ cation environment, transport, and mechanical properties of the LiTFSI doped N-methyl-N-alkylpyrrolidinium+TFSI- ionic liquids

Molecular dynamics (MD) simulations have been performed on N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (mppy(+)TFSI(-)) and N,N-dimethyl- pyrrolidinium bis(trifluoromethanesulfonyl)imide (mmpy(+)TFSI(+)) ionic liquids (ILs) doped with 0.25 mol fraction LiTFSI salt at 303-500 K. The liquid density, ion self-diffusion coefficients, and conductivity predicted by MD simulations were found to be in good agreement with experimental data, where available. MD simulations reveal that the Li(+) environment is similar in mppy(+)TFSI(-) and mmpy(+)TFSI(+) ILs doped with LiTFSI. The Li(+) cations were found to be coordinated on average by slightly less than four oxygen atoms with each oxygen atom being contributed by a different TFSI(-) anion. Significant lithium aggregation by sharing up to three TFSI(-) anions bridging two lithiums was observed, particularly at lower temperatures where the lithium aggregates were found to be stable for tens of nanoseconds. Polarization of TFSI(-) anions is largely responsible for the formation of such lithium aggregates. Li(+) transport was found to occur primarily by exchange of TFSI(-) anions in the first coordination shell with a smaller (approximately 30%) contribution also due to Li(+) cations diffusing together with their first coordination shell. In both ILs, ion self-diffusion coefficients followed the order Li(+) < TFSI(-) < mmpy(+) or mppy(+) with all ion diffusion in mmpy(+)TFSI(-) being systematically slower than that in mppy(+)TFSI(-). Conductivity due to the Li(+) cation in LiTFSI doped mppy(+)TFSI(-) IL was found to be greater than that for a model poly(ethylene oxide)(PEO)/LiTFSI polymer electrolyte but significantly lower than that for an ethylene carbonate/LiTFSI liquid electrolyte. Finally, the time-dependent shear modulus for the LiTFSI doped ILs was found to be similar to that for a model poly(ethylene oxide)(PEO)/LiTFSI polymer electrolyte on the subnanosecond time scale.     

Enhanced Surface Interactions Enable Fast Li+ Conduction in Oxide/Polymer Composite Electrolyte

Li⁺‐conducting oxides are considered better ceramic fillers than Li⁺‐insulating oxides for improving Li⁺ conductivity in composite polymer electrolytes owing to their ability to conduct Li⁺ through the ceramic oxide as well as across the oxide/polymer interface. Here we use two Li⁺‐insulating oxides (fluorite Gd_0.1Ce_0.9O_1.95 and perovskite La_0.8Sr_0.2Ga_0.8Mg_0.2O_2.55) with a high concentration of oxygen vacancies to demonstrate two oxide/poly(ethylene oxide) (PEO)‐based polymer composite electrolytes, each with a Li⁺ conductivity above 10^?4 S cm^?1 at 30 °C. Li solid‐state NMR results show an increase in Li⁺ ions (>10 %) occupying the more mobile A2 environment in the composite electrolytes. This increase in A2‐site occupancy originates from the strong interaction between the O^2? of Li‐salt anion and the surface oxygen vacancies of each oxide and contributes to the more facile Li⁺ transport. All‐solid‐state Li‐metal cells with these composite electrolytes demonstrate a small interfacial resistance with good cycling performance at 35 °C.     

Existing condition and migration property of ions in lithium electrolytes with ionic liquid solvent

Ionization conditions of each ionic species in lithium ionic liquid electrolytes, LiTFSI/BMI-TFSI and LiTFSI/BDMI-TFSI, were confirmed based on the diffusion coefficients of the species measured by the pulsed gradient spin-echo (PGSE) NMR technique. We found that the diffusion coefficient ratios of the cation and anion species D(Li)(obs)/D(F)(obs) of the lithium salt and D(H)(obs)/D(F)(obs) of the ionic liquid solvent were effective guides to evaluate the ionization condition responsible for their mobility. Lithium ions were found to be stabilized, forming the solvated species as Li(TFSI)3(2-). TFSI- anion coordination could be relaxed by the dispersion of silica to form a gel electrolyte, LiTFSI/BDMI-TFSI/silica. It is expected that the oxygen sites on the silica directly attract Li+, releasing the TFSI- coordination. The lithium species, loosing TFSI- anions, kept a random walk feature in the gel without the diffusion restriction attributed from the strong chemical and morphological effect as that in the gel with the polymer. We can conclude that the silica dispersion is a significant approach to provide the appropriate lithium ion condition as a charge-transporting species in the ionic liquid electrolytes.     

Synthesis and characterization of polymer electrolytes based on cross‐linked phenoxy‐containing polyphosphazenes

A new method to prepare the polymer electrolytes for lithium‐ion batteries is proposed. The polymer electrolytes were prepared by reacting poly(phosphazene)s (MEEPP) having 2‐(2‐methoxyethoxy)ethoxy and 2‐(phenoxy)ethoxy units with 2,4,6‐tris[bis(methoxymethyl)amino]‐1,3,5‐triazine (CYMEL) as a cross‐linking agent. This method is simple and reliable for controlling the cross‐linking extent, thereby providing a straightforward way to produce a flexible polymer electrolyte membrane. The 6 mol % cross‐linked polymer electrolyte (ethylene oxide unit (EO)/Li = 24:1) exhibited a maximum ionic conductivity of 5.36 × 10^?5 S cm^?1 at 100 °C. The ⁷Li linewidths of solid‐state static NMR showed that the ionic conductivity was strongly related to polymer segment motion. Moreover, the electrochemical stability of the MEEPP polymer electrolytes increased with an increasing extent of cross‐linking, the highest oxidation voltage of which reached as high as 7.0 V. Moreover, phenoxy‐containing polyphosphazenes are very useful model polymers to study the relationship between the polymer flexibility; that is, the cross‐linking extent and the mobility of metal ions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 352–358     

Nitroprusside-PEO enthalpic interaction as a driving force for partitioning of the [Fe(CN)(5)NO](2-) anion in aqueous two-phase systems formed by poly(ethylene oxide) and sulfate salts

Ions are known to concentrate in the salt-enriched phase of aqueous two-phase systems, with the only known exception being the pertechnetate anion, TcO(4)(-). We have discovered a second ion, nitroprusside anion (NP), which is markedly transferred from the salt phase to the polymer phase. The partitioning behavior of [Fe(CN)(5)NO](2-) anion was investigated in ATPS formed by poly(ethylene oxide) of molar mass 3350 and 35000 g mol(-1), and different sulfate salts (Na(2)SO(4), Li(2)SO(4), and MgSO(4)). On the basis of a model, the nitroprusside high affinity for the macromolecular phase was attributed to an enthalpic specific interaction between the anion and ethylene oxide unit. Partition coefficients increased exponentially with tie-line length increase, reaching values as high as 1000 and showing a relationship very dependent on the salt nature, but independent of the polymer molar mass.     

Molecular dynamics simulation of polymer electrolytes based on poly(ethylene oxide) and ionic liquids. II. Dynamical properties

Dynamical properties of polymer electrolytes based on poly(ethylene oxide) (PEO) and ionic liquids of 1-alkyl-3-methylimidazolium cations were calculated by molecular dynamics simulations with previously proposed models [L. T. Costa and M. C. Ribeiro, J. Chem. Phys. 124, 184902 (2006)]. The effect of changing the ionic liquid concentration, temperature, and the 1-alkyl-chain lengths, [1,3-dimethylimidazolium]PF(6) and [1-butyl-3-methylimidazolium]PF(6) ([dmim]PF(6) and [bmim]PF(6)), was investigated. Cation diffusion coefficient is higher than those of anion and oxygen atoms of PEO chains. Ionic mobility in PEO[bmim]PF(6) is higher than in PEO[dmim]PF(6), so that the ionic conductivity kappa of the former is approximately ten times larger than the latter. The ratio between kappa and its estimate from the Nernst-Einstein equation kappa/kappa(NE), which is inversely proportional to the strength of ion pairs, is higher in ionic liquid polymer electrolytes than in polymer electrolytes based on inorganic salts with Li(+) cations. Calculated time correlation functions corroborate previous evidence from the analysis of equilibrium structure that the ion pairs in ionic liquid polymer electrolytes are relatively weak. Structural relaxation at distinct spatial scales is revealed by the calculation of the intermediate scattering function at different wavevectors. These data are reproduced with stretched exponential functions, so that temperature and wavevector dependences of best fit parameters can be compared with corresponding results for polymer electrolytes containing simpler ions.     

Dye-sensitized solar cells employing amphiphilic poly(ethylene glycol) electrolytes

Poly(ethylene glycol) (PEG) was modified with a long alkyl acid to produce a self-organized amphiphilic polymer (amPEG). FT-IR and NMR spectroscopies confirmed the amPEG synthesis. This polymer was complexed with lithium iodide (LiI) and 1-methyl-3-propylimidazolium iodide (MPII) to prepare polymer electrolytes to be applied to dye-sensitized solar cells (DSSC). FT-IR studies showed that upon the addition of litium salt the free ether and ester carbonyl bands shifted towards lower wavenumbers, indicating the complexation of Li ions with oxygens on the amPEG. Alkylation and salt introduction reduced PEG crystallinity, as characterized by wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC). The ionic conductivities of the polymer electrolytes increased with increasing salt concentrations, and the energy conversion efficiency of DSSC reached 2.6% at 100 mW cm^?2 for amPEG/MPII system which is higher than amPEG/LiI. This may be due to the higher mobility of MPII ion than the lithium ion in the polymer electrolyte. The interfacial properties between electrolytes and electrodes were investigated using field-emission scanning electron microscopy (FE-SEM) and electrochemical impedance spectroscopy (EIS).     

Dielectric relaxation and ionic transport in poly(ethylene carbonate)‐based electrolytes

To study the ion‐conductive and dielectric properties of polymer electrolytes based on poly(ethylene carbonate) (PEC) with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), the complex permittivity and conductivity were measured using broadband dielectric spectroscopy. The temperature dependence of the relaxation frequency and ionic conductivity for PEC‐LiTFSI electrolytes (1 – 200 mol%) indicates that the segmental motion of PEC chains decreases with the addition of just 1 mol% of Li salt and increases with increasing concentration above 10 mol%. According to the Walden rule for PEC‐based electrolytes, the value of deviation from the reference line increased, and the fragility and decoupling exponents decreased with increasing salt concentration. These results indicate that there are large numbers of ion pairs and aggregated ions, which imply low ionicity and reduced fragility in highly concentrated PEC‐based electrolytes. Copyright © 2016 John Wiley & Sons, Ltd.     

Development of many-body polarizable force fields for Li-battery applications: 2. LiTFSI-doped Oligoether, polyether, and carbonate-based electrolytes

A quantum chemistry study of Li(+) interactions with ethers, carbonates, alkanes, and a trifluoromethanesulfonylimide anion (TFSI(-)) was performed at the MP2, B3LYP, and HF levels using the aug-cc-pvDz basis set for solvents and TFSI(-) anion, and [8s4p3d/5s3p2d]-type basis set for Li. A classical many-polarizable force field was developed for the LiTFSI salt interacting with ethylene carbonate (EC), gamma-butyrolactone (GBL), dimethyl carbonate (DMC), acetone, oligoethers, n-alkanes, and perfluoroalkanes. Molecular dynamics (MD) simulations were performed for EC/LiTFSI, PC/LiTFSI, GBL/LiTFSI, DMC/LiTFSI, 1,2-dimethoxyethane/LiTFSI, pentaglyme/LiTFSI, and poly(ethylene oxide) (MW = 2380)/LiTFSI electrolytes at temperatures from 298 to 423 K and salt concentrations from 0.3 to 5 M. The ion and solvent self-diffusion coefficients, electrolyte conductivity, electrolyte density, LiTFSI apparent molar volumes, and structure of the Li(+) cation environment predicted by MD simulations were found in good agreement with experimental data.     

Wetting Phenomena and their Effect on the Electrochemical Performance of Surface‐Tailored Lithium Metal Electrodes in Contact with Cross‐linked Polymeric Electrolytes

Li metal batteries (LMBs) containing cross‐linked polymer electrolytes (PEs) are auspicious candidates for next‐generation batteries. However, the wetting behavior of PEs on uneven Li metal surfaces has been neglected in most studies. Herein, it is shown that microscale defect sites with curved edges play an important role in a wettability‐dependent electrodeposition. The wettability and the viscoelastic properties of PEs are correlated, and the impact of wettability on the nucleation and diffusion near the Li|PE interface is distinguished. It is found that the curvature of the edges is a key factor for the investigation of wetting phenomena. The appearance of microscale defects and phase separation are identified as main causes for erratic nucleation. It is emphasized that the implementation of stable and consistent long‐term cycling performance of LMBs using PEs requires a deeper understanding of the “soft‐solid”–solid contact between PEs and inherently rough Li metal surfaces.     

NMR study of photo‐crosslinked solid polymer electrolytes: The influence of monofunctional oligoethers

Solid polymer electrolytes for Lithium batteries applications are commonly prepared by dissolving a lithium salt in poly(ethylene oxide) (PEO)‐based materials. Their performance is strongly related to the structure of the polymer network. In this article, a new salt‐in‐polymer electrolyte prepared by the fast and easy radical photopolymerization of PEO acrylate oligomers is studied. Here, a difunctional monomer used as the polymer backbone is copolymerized with monofunctional monomers of different length and concentration. Thus, the crosslinking density and conductivity are changed. These systems are investigated by a detailed NMR study yielding local dynamics and mass transport by temperature‐dependent spin‐lattice relaxation time and PFG‐NMR diffusion measurements for different nuclei (⁷Li and ¹⁹F). The results indicate that a sufficiently long monofunctional oligoether improves the properties, since it provides a lower crosslinking density as well as more coordinating oxygens for the Li ions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1571–1580     

Li<Superscript><Emphasis Type="Bold">+</Emphasis></Superscript> Transport Mechanism in Oligo(Ethylene Oxide)s Compared to Carbonates

Molecular dynamics simulations have been performed on oligo(ethylene oxide)s of various molecular weights doped with the lithium bis(trifluoromethanesulfonyl)imide salt (LiTFSI) in order to explore the mechanism of Li⁺ transport in materials covering the range from liquid electrolytes to prototypes for high molecular weight poly(ethylene oxide)-based polymer electrolytes. Good agreement between MD simulations and experiments is observed for the conductivity of electrolytes as a function of molecular weight. Unlike Li⁺ transport in liquid ethylene carbonate (EC) that comes from approximately equal contributions of vehicular Li⁺ motion (motion together with solvent) and Li⁺ diffusion by solvent exchange, Li⁺ transport in oligoethers was found to occur predominantly by vehicular motion. The slow solvent exchange of Li⁺ in oligo(ethylene oxide)s highlights why high molecular weight amorphous polymer electrolytes with oligo(ethylene oxide)s solvating groups suffer from poor Li⁺ transport. Ion complexation and correlation of cation and anion motion is examined for oligoethers and compared with that in EC.     

Structural conformation in a poly(ethylene oxide) film determined by X-ray emission spectroscopy

The electronic structure of pol(ethylene oxide) (PEO) in a thin (<1 mu) film sample was experimentally probed by X-ray emission spectroscopy. Both nonresonant and resonant X-ray emission spectra were simulated by using density functional theory (DFT) applied to four different models representing different conformations in the polymer. Calculated spectra were compared with experimental results for the PEO film. It was found that the best fit was obtained with the polymer conformation in PEO electrolytes from which the salt (LiMF6, M = P, As, or Sb) had been removed. This conformation is different from the crystalline bulk polymer and implies that film casting, commonly used to form electrolytes for Li polymer batteries, induces the same conformation in the polymer not depending upon the presence of salt.