Study of color and structural changes in silver painted medieval glasses

Silver was introduced into medieval glass by an ancient painting process using different clay minerals (ochre, illitic, montmorillonitic, and kaolinitic clays). The colorimetric properties, studied by UV-Vis spectroscopy, were dependent on the clay mineral as a result of different concentration of Ag ions diffused into the glass surface. TEM results showed the well known formation of silver nanoclusters which give the yellow coloration of the glass. The obtained results showed that clay properties such as specific surface area, pore volume and iron concentration (Fe₂O₃), are important factors that affect the yellow coloration. It is also observed that Fe₂O₃ acts as an oxidant agent for silver atoms providing the Ag₂O formation. This oxide cannot diffuse into the glass structure and avoid the ion-exchanged process. After Ag ion diffusion some structural changes occur in the glass as it has been shown by Raman spectroscopy. It is observed that the diffusion process leads to depolymerization of the glass network as it is determined by analyzing the Qⁿ components of Raman spectra. Two Raman bands at 148 and 244 cm⁻¹ assigned to Ag-O bonds can be associated to the presence of Ag₂O on the glass painted surface.     

Surface Energy of Silica-TEOS-PDMS Ormosils

Inverse gas chromatography (IGC) was applied to characterize the surface energy of organically modified silicates (ormosils) by measuring the interaction of molecular organic probes with the ormosil surface. Ormosils were prepared by the sol-gel method by the reaction of TEOS (tetraethoxysilane), PDMS (polydimethylsiloxane) and different types of silica (Aerosil 130, Aerosil 200 and Aerosil 380). The isosteric heat of adsorption, q _st, and the dispersive component of the surface energy, _s ^D, were estimated by using the retention volume of different nonpolar and polar probes at infinite dilution. The dispersive component shows an increase as the specific surface area of the silica is increased from 29.6 mJ/m² to 51.4 mJ/m² at 60°C. Such values are lower than that obtained for aerosil particles meaning that PDMS chains impede the interaction with silanol groups located on the silica surface. The specific interaction parameter, I^SP, and the enthalpy of specific adsorption, H _a ^SP, of polar probes on the ormosil surface were also measured in order to obtain the acid-base character of ormosil surface. The H _a ^SP, was correlated with the donor, DN, and the acceptor, AN, numbers of the probes to quantify the acidic, K _A, and the basic, K _B, parameters of the substrate surface. The obtained results suggest that the silica particles were covered by PDMS chains in a different way depending on the type of silica used. The values of K _A and K _B suggest that the ormosil surface is amphoteric, with predominantly acceptor electron sites.     

Organocatalytic enantioselective synthesis of highly functionalized polysubstituted pyrrolidines

The organocatalytic conjugate addition of different aldehydes to beta-nitroacrolein dimethyl acetal, generating the corresponding highly functionalized nitroaldehydes in high yields and with high stereoselectivities, has been studied in detail. These transformations have been achieved by using both readily available starting materials in a 1:1 ratio as well as commercially available catalysts at a 10 mol % catalyst loading. Furthermore, a very short and efficient protocol has been devised for the preparation of highly enantioenriched pyrrolidines containing two or three contiguous stereocenters starting from the obtained Michael adducts. 3,4-Disubstituted pyrrolidines have been obtained in a single step by Zn-mediated chemoselective reduction of the nitro group followed by intramolecular reductive amination, and trisubstituted homoproline derivatives have been prepared by means of an olefination reaction and a cascade process involving chemoselective reduction of the nitro group followed by a fully diastereoselective intramolecular aza- Michael reaction.     

Analysis by DSC of the drying and sintering processes of alkoxide-derived SiO2–ZrO2 gels

The drying and sintering processes of SiO₂–ZrO₂ alkoxide-derived gels have been studied by means of DSC technique. In the drying process, most part of water and alcohols are removed from the gels. For the SiO₂ gel such elimination occurs at the end of the drying process, however for the ZrO₂ gel this elimination occurs during the whole drying time. An intermediate behavior is observed for the binary system SiO₂–ZrO₂ gels. In the sintering process, the DSC technique allows to determine the elimination of water and alcohols retained within the structure (open or close pores) and the well-known hydroxyl condensation of silica gel between 700° and 800°C is also observed. The ZrO₂ gel shows the final hydroxyl condensation at the heating temperature of 600°C. For the binary SiO₂–ZrO₂ gels, the hydroxyl condensation has been associated to the activation energy needed for the dissociation of silica hydroxyls. This energy decreases with the ZrO₂ concentration in the gel resulting in a sintering treatment of 500°C leading to the entire hydroxyl condensation for the gel with 75% ZrO₂–25% SiO₂.

By studying the temperature of the DSC peaks, it is possible to know the temperature at which most part of water and alcohols are leaving the gel, and these results can be used in order to select the corresponding drying or sintering schedules for obtaining a well-fabricated material.     

Effect of the Measurement Temperature on the Dispersive Component of the Surface Free Energy of a Heat Treated SiO2 Xerogel

The surface free energy of a monolithic silica xerogel treated at 1000°C has been measured by inverse gas chromatography in the temperature range 25–150°C using n-alkanes. Values of the dispersive component, _S ^D, vary from 49.07 mJ·m^–2 at 25°C to 17.20 mJ·m^–2 at 150°C. The _S ^D value obtained at 25°C is lower than that found for amorphous and crystalline silicas but higher than that found for glass fibres meaning that the heat treatment at 1000°C changes drastically the structure of the silica xerogel showing a surface similar to a glass. However, the higher value of _S ^D in comparison to glass fibres can be attributed to the mesoporous structure present in the silica xerogel. In the temperature range of 60–90°C there exists an abrupt change of the _S ^D values as well as in the dispersive component of the surface enthalpy, h _S ^D. Such abrupt change can be attributed to an entropic contribution of the surface free energy.     

Suppressed Mobility of Negative Charges in Polymer Electrolytes with an Ether‐Functionalized Anion

Suppressing the mobility of anionic species in polymer electrolytes (PEs) is essential for mitigating the concentration gradient and internal cell polarization, and thereby improving the stability and cycle life of rechargeable alkali metal batteries. Now, an ether‐functionalized anion (EFA) is used as a counter‐charge in a lithium salt. As the salt component in PEs, it achieves low anionic diffusivity but sufficient Li‐ion conductivity. The ethylene oxide unit in EFA endows nanosized self‐agglomeration of anions and trapping interactions between the anions and its structurally homologous matrix, poly(ethylene oxide), thus suppressing the mobility of negative charges. In contrast to previous strategies of using anion traps or tethering anions to a polymer/inorganic backbone, this work offers a facile and elegant methodology on accessing selective and efficient Li‐ion transport in PEs and related electrolyte materials (for example, composites and hybrid electrolytes).     

Direct catalytic azidation of allylic alcohols

A direct catalytic azidation of primary, secondary, and tertiary allylic alcohols has been developed. This new azidation reaction affords the corresponding allylic azides in high to excellent yields and regioselectivities. The reaction provides straightforward access to allylic azides that are valuable intermediates in organic synthesis, including the preparation of primary amines or 1,2,3-triazole derivatives.     

Gold‐Catalyzed Asymmetric Allylic Substitution of Free Alcohols: An Enantioselective Approach to Chiral Chromans with Quaternary Stereocenters for the Synthesis of Vitamin E and Analogues

The enantioselective synthesis of α‐ and γ‐tocopherol (the most biologically active members of vitamin E family) and analogues has been accomplished employing a new enantioselective gold catalyzed intramolecular allylic alkylation reaction followed by an olefin cross‐metathesis as key steps. The methodology proved to be applicable to different olefins highlighting its potential for the synthesis of diverse libraries.     

The use of graphene as an adsorbent for the extraction of permethrin from urine

A nonmagnetically modified graphene was employed as the adsorbent in the dispersive solid-phase extraction (d-SPE) for the isolation of permethrin from urine samples that were further analyzed by the HPLC/UV method. The following four key factors influencing permethrin extraction efficacy were studied: 1. graphene suspension volume, 2. adsorption time, 3. desorbent (acetonitrile) volume, and 4. desorption time. Under the optimized conditions of the d-SPE (graphene) procedure the main validation parameters of the analytical method were determined as follows: extraction recovery (%) 71.2, 63.5, and 95.4; intra-day repeatability (%RSD) 14.7, 11.5, and 15.2; inter-day repeatability (%RSD) 16.2, 11.9, and 19.1 for 0.125, 0.250, and 1.0 µg/mL permethrin concentration levels, respectively. Limits of detection (LOD) and quantification (LOQ) were 0.045 and 0.125 µg mL^?1, respectively. The proposed method may be useful for the monitoring of permethrin in human urine taken from people dressed in uniforms disinfected with this pesticide.