生物分子L-半胱氨酸辅助的六角形γ-硫化锰的水热合成与表征

本文使用L-半胱氨酸和不同类型的锰盐通过水热方法合成了具有不同直径和长度的六角形γ-硫化锰的单晶纳米棒,并通过X-射线衍射、扫描电子显微镜和透射电子显微镜实验对γ-硫化锰纳米棒的结构和性质进行了表征.实验结果表明不同锰盐中的阴离子对六角形γ-硫化锰纳米棒的形成具有影响并对其形成机理进行了简单讨论.     

掺铋α-MnO_2纳米棒的合成及超电容性能

采用水热法合成了掺铋α-MnO_2纳米棒,通过X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、循环伏安(CV)、恒电流充放电和电化学阻抗谱(EIS)等手段对材料的结构及电化学性能进行了表征.结果表明,铋以Bi~(3+)形式掺杂于α-MnO_2的晶格之中;掺铋α-MnO_2纳米棒的电化学性能比未掺铋α-MnO_2有明显改善,在1 A/g的电流密度下,比电容(265 F/g)比同条件合成的未掺铋α-MnO_2(129 F/g)提高约1.05倍,1 A/g电流密度下循环2000周后容量保持率为95%.     

Zn基片上ZnO及ZnS/ZnO复合纳米阵列的液相合成及发光性质

采用温和的溶液路线在Zn基片上合成了单晶态的ZnO纳米棒阵列、 纳米片阵列和ZnS/ZnO复合双层纳米棒阵列. 使用X射线粉末衍射仪、 扫描电子显微镜、 高分辨透射电子显微镜、 X射线光电子能谱仪等对产物的组成、 结构及形貌进行了表征. 讨论了表面活性剂在液相合成中对产物形貌的调控作用. 通过室温发射光谱的测定, 研究了所得纳米阵列材料的发光性质.     

在离子液/水体系中超声合成MoO_3纳米棒及其表征(英文)

采用超声波的方法在离子液(1-丁基-3-甲基氯代咪唑盐离子液,[BMIM]Cl)中合成了直径分布在80~150 nm的MoO3纳米棒.采用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)和选区电子衍射(SAED)对所合成材料的微观结构和形貌进行了表征.此外,考察了反应时间、加入[BMIM]Cl的量以及其它咪唑基离子液对产物的影响并提出了可能的反应机理.最后对在不同温度煅烧下所得的α-MoO的甲烷催化燃烧活性进行了表征.     

水热模板法合成碲化镍纳米棒

研究了一种简单的碲化镍纳米棒的合成方法．在合成过程中,以碲纳米棒为反应模板,使之与新鲜生成的纳米镍颗粒反应生成碲化镍．利用X射线粉末衍射仪、扫描电子显微镜对产物进行了表征,研究了反应物中Ni和Te的摩尔比及反应温度对产物的影响,讨论了由Te纳米棒向NiTe纳米棒转化的机理．     

室温离子液体介质中尺寸、结构可控Ni纳米微粒的制备及结构表征

分别以室温离子液体1-丁基-3-甲基-咪唑四氟硼酸盐和1-己基-3-甲基．咪唑四氟硼酸盐为介质,采用有机化合物热分解的方法制备了尺寸和结构均可控的金属Ni纳米微粒．采用X射线衍射仪、透射电子显微镜和傅立叶红外光谱仪对所制备的样品进行了结构表征．X射线衍射结果表明：以1-丁基-3-甲基-咪唑四氟硼酸盐为介质制备的Ni纳米微粒具有立方相结构,而以1-己基-3-甲基-咪唑四氟硼酸盐为介质制备的Ni纳米微粒具有六方相结构．透射电子显微镜结果表明：随着反应原料浓度的不同所制备的纳米微粒具有不同的粒径．傅立叶红外光谱表明：离子液体不但作为反应的介质而且作为修饰剂修饰在了Ni纳米微粒的表面,从而有效地阻止了Ni纳米微粒的团聚和氧化。     

生物分子辅助溶剂热合成硫化锑纳米棒

以SbCl3和L-胱氨酸为反应原料,采用溶剂热法在170℃反应12h,制得硫化锑(Sb2S3)纳米棒.X射线衍射(XRD)、能量分散光谱(EDS)和X射线光电子能谱(XPS)研究表明所得产物为典型的Sb2S3正交结构.场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)研究显示,Sb2S3纳米棒长为3～6μm,平均直径约为150nm.讨论了不同反应时间对Sb2S3的形成及其形貌的影响,并根据实验结果对所合成的一维纳米棒可能的形成机理进行了简单的探讨.     

PbS纳米棒束的水热合成与表征

以乙酸铅和硫脲为主要原料,十二烷基磺酸钠和十六烷基三甲基溴化铵为表面活性剂.在120℃反应12 h.水热法制备了PbS纳米棒束.并利用X射线粉末衍射(XRD)、透射电子显微镜(TEM)和高分辨电子显微镜(HRTEM)等手段对产物进行了表征.实验结果表明:产物为立方结构的PbS单晶纳米棒所组成的纳米棒束.考察了乙酸铅和硫脲的摩尔比以及反应温度对合成产物的影响,发现当乙酸铅和硫脲的摩尔比为1∶1时,得到大量的PbS纳米棒束,并初步探讨了其形成机理.     

离子液体辅助合成AuPd纳米海绵及催化性能

在功能化离子液体氯化1-羟乙基-3-甲基咪唑([HEmim]Cl)辅助下, 在室温水溶液中一步快速合成了具有多孔海绵状结构的AuPd纳米材料. 通过场发射扫描电子显微镜(FESEM)、 透射电子显微镜(TEM)、 X射线能谱(EDX)和X射线衍射分析(XRD)等对该材料进行了表征. 结果表明, AuPd纳米海绵为合金结构, 由表面粗糙的纳米颗粒聚集熔接而成. 采用不同摩尔比(3∶1, 1∶1或1∶3)的前驱物HAuCl₄和Na₂PdCl₄均可制备出海绵状AuPd合金结构. 离子液体对AuPd纳米海绵状结构的形成起关键作用. 在对硝基苯酚还原反应中, 不同组成的AuPd纳米海绵均表现出比商用Pd/C催化剂更优异的性能. 其中, Au₁Pd₃纳米海绵具有最高的催化活性, 反应在98 s内即可完成, 反应速率常数为0.0143 s ^-1, 是商用Pd/C的2.3倍. 该方法也可用于制备其它双金属(如PdCu, PtCu等)和多金属纳米海绵.     

PbS纳米棒的水热合成与表征

以乙酸铅和硫脲为主要原料,十二烷基磺酸钠和十六烷基三甲基溴化铵为表面活性剂,在120℃反应12h,水热法制备了PbS纳米棒.并利用X射线粉末衍射(XRD)、透射电子显微镜(TEM)和高分辨电子显微镜(HRTEM)等手段对产物进行了表征,实验结果表明：产物为纯相立方结构的PbS单晶纳米棒.考察了乙酸铅和硫脲间的摩尔比以及反应温度对合成产物的影响,并初步探讨其形成机理.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.