A three dimensional on-line measurement method based on five unequal steps phase shifting

A three-dimensional on-line measurement method based on five unequal steps phase-shifting with phase measuring profilometry is presented. While only one sinusoidal grating pattern is projected onto the measured object moving with the pipe-line, five arbitrary deformed patterns are captured by CCD as the measured object moves within a duty cycle of the grating pattern. The modulation distribution based on Fourier transform profilometry is introduced to realize pixel matching so as to calculate the corresponding equivalent shifted phase on the deformed patterns. A five unequal steps phase shifting algorithm is developed, which is suitable for non-uniform motion of the pipeline. The experiments verify its feasibility and validity.     

一种无需标记的在线三维测量方法

提出了一种无需标记的物体在线三维面形测量方法。将一固定的正弦条纹投影到待测运动物体上,借助物体运动产生等效的相移变形条纹。基于傅里叶变换轮廓术的调制度对各帧变形条纹计算,提取其具有某一特定分布的特征区域,采用相关度最大法,检测各帧变形条纹对应的调制度特征区域的位移量来检测出物体的移动,从而实现像素匹配,得到一组像素坐标完全一一对应的等效相移变形条纹图。利用Stoilov相移算法得到物体的截断相位,利用位相展开算法展开位相,通过位相和高度映射即可实现在线移动物体的面形测量。通过计算机仿真验证了该方法的可行性。     

一种采用相位测量轮廓术的工件在线三维检测方法

提出了一种基于相移轮廓术在线检测工件三维信息的方法.利用计算机编程产生的一固定正弦光栅图通过数字投影机投射在流水线的一段区域,无需专门的相移装置,当物体在线移动穿过此区域时,使用计量光栅等距离定位发信,控制CCD采集五帧变形条纹图,并采用具有一定特征的标记实现五帧变形条纹图间的亚像素级像素匹配,提取相移变形条纹图,由Stoilov算法计算,得到工件表面截断相位,展开后可得到物体表面三维信息.实验验证了其可行性.     

基于SURF算法的在线三维测量方法

提出了一种采用加速鲁棒特征算法匹配运动物体的特征点,实现在线三维测量的方法.该方法只需投影一固定的正弦光栅到在线运动中的被测物体表面上,使投影光栅线垂直运动方向,当物体每移动相同的距离,由CCD采集到相应的变形条纹图,从中提出对应的背景光场,借助SURF算法对各帧背景光场的物体进行特征匹配,即可获得一组具有等步相移量的等效相移条纹图,从而采用等步相移算法可重构出在线运动物体的三维面形.实验验证了该方法的有效性和可行性,并与在线FTP方法进行了比较,所提方法的平均绝对误差小于在线FTP方法的二分之一,均方根误差小于在线FTP方法的四分之一.     

一种用于在线三维测量的五步非等步相移算法

提出了一种五步非等步相移算法,并成功应用于在线三维测量中。仅投影一固定正弦光栅条纹到物体上,通过物体在线运动产生等效相移,在一个条纹周期范围内任意采集五帧变形条纹图,通过像素匹配使各帧条纹图中的物点一一对应并计算出相应的等效相移量。采用所提出的五步非等步相移算法,即可重构物体。计算机模拟与实验验证了该方法的可行性和有效...     

On-line phase measuring profilometry based on phase matching

On-line phase measuring profilometry based on phase matching is proposed. While just one fixed sinusoidal fringe is projected on a measured object moving with the pipeline, deformed patterns modulated by the object moving at the same distance moment are captured synchronously by the CCD camera. The phase information of the object in those captured deformed patterns can be predicted using FTP method to assist the pixel matching so as to realize the point-to-point correspondence of the object in the captured deformed patterns. Meanwhile, the equivalent phase-shifting deformed patterns can be extracted. So the three dimensional shape of the object can be reconstructed successfully with an equal phase-shifting algorithm. Numerical simulation and experiments show feasibility and validity of the proposed method.     

基于偏振位相调制的位相轮廓测量

本文介绍了一种用来测量三维物体面形的位相轮廓方法，它是通过将正弦光场投影到被测物面，该光场被物体表面调制后发生位相改变，利用偏振位相调制及位相检测算法计算物面的位相分布，再根据几何关系实现对物体三维形貌的测量。实验装置采用一种偏振位相调制的干涉光场投影装置对光场进行简便而精确的移相，采用ＣＣＤ摄像机记录畸变光场，并用计算机处理和显示测量结果。文中给出了有关实验结果。     

Image fusion by color texture extraction

In this paper, we present a method to extract shape and color information simultaneously of a colorful object by projecting sequentially sinusoidal fringe patterns onto object's surface. Distorted fringe patterns are captured by digital CCD color camera. It is applied the phase shifting method to evaluate the phase of the projected fringes. We obtain both topography details and color texture information.     

相位锁定循环投影技术及其应用

由一组规则栅线投影到物体表面的变形光栅,采用相位锁定循环解调算法解调出含有物体表面高度信息的相位.该技术的最大优势是不需传统的相位去包裹.利用该算法对二维栅线图扫描确定的相位.本文给出了一个典型试件的实验结果和分析.     

A composite-structured-light 3D measurement method based on fringe parameter calibration

This paper proposes a novel method for reducing measurement error caused by spectrum overlapping in composite-structured-light 3D measurement systems. For a composite-structured-light 3D measurement system, spectrum overlapping causes parameters of each deformed phase-shifting fringe to change, and therefore leads to phase measurement errors. The proposed fringe parameter calibration method is based on the fact that variations in each deformed fringe's parameters are independent of height and reflectivity of the measured object. Three frames of composite grating are projected on the reference plane, and each carrier channel includes the information of three phase-shifting sinusoidal gratings used in Phase Measuring Profilometry (PMP). With the parameter calculation formulas of PMP, the parameters of fringes demodulated from the same carrier channel can be calculated, and therefore parameter relation coefficients between fringes demodulated from different carrier channels may be obtained. When an object is measured, these relation coefficients can be used to calibrate the parameters of the deformed phase-shifting fringes. A new 3D measurement mathematical model is established to reconstruct the shape of the object. Experimental data proved that the proposed method can effectively restrain the effect of spectrum overlapping and improve measurement accuracy by more than three times.     

Fourier transform profilometry: : a review

Fourier transform profilometry is one of the popular non-contact 3-D measurement methods, where a Ronchi grating or sinusoidal grating is projected onto a diffuse three-dimensional surface, and the resulting deformed grating image is detected by a CCD camera and processed by a computer. This method requires only one frame (or two frames) of the deformed fringe pattern in some algorithms to retrieve the surface of measured object, so it has obvious advantage for real time data acquisition and 3-D measurement of dynamic process. In this paper, we review some algorithms in FTP, discuss some important problems, including frequency spectra overlapping, phase unwrapping, sampling, and 3-D measurement of dynamic process. With the development of computer hardware and software and availability of high-resolution image grabber, FTP method will be a promising one for acquiring 3-D data of object, and more and more researchers pay attention to it.     

次条纹积分法解调位相的三维面形测量

提出一种新的条闰相分析技术用于三维面形自动测量。将光栅图案投影于物体表面上，投影像随物体三维面形变形，形变的投影像用次条纹积分算法分析，求出位相变化和相应的三维面形。     

Study on Fourier transforms profilometry based on bi-color projecting

Projecting a bicolor sinusoidal fringe pattern consisting of two interlaced RGB format base color fringe patterns with π phase difference onto an object thought digital light projector, we can capture a deformed color pattern by color digital camera, then decode two individual sinusoidal fringe patterns with π phase difference by color-separating technique. Accessing these two fringe patterns, not only are zero-order spectra eliminated, but mask function is also built to mark valid unwrapping area in FTP, automatically.Moreover, because the wrapped phase just inside the valid areas is needed unwrapping, we can mark these areas with mask function, which avoids the error transferring resulting from unwrapping the invalid areas and shortens the unwrapping time. Furthermore, in Fourier transform processing, the full-field deformed fringe pattern generally needed to guarantee measurement precision can be formed by expanding non-full-field fringe pattern captured using the mask function.     

A novel color fringe projection based Fourier transform 3D shape measurement method

A novel Fourier transform 3D shape measurement method based on color fringe projection is proposed in order to solve the spectrum overlapping and phase unwrapping problems existed in Fourier transform profilometry (FTP). The R and G components of the color fringe are set to two sinusoidal patterns with different frequencies and the B component is set to the average value of R or G component. Then this pattern is projected to the object and the deformed fringe image is captured. Three gray patterns are separated from the color fringe, the background and high frequency noise can be eliminated using our method and the accurate unwrapped phase can be got. Only one shot color pattern is projected to get the 3D information of the object. Experiment results show that the 3D information of an object can be obtained rapidly and accurately.     

基准光栅重构傅里叶变换轮廓术

应用傅里叶轮廓变换术进行三维形貌测量中,为了获得待测物体的高度相位信息,通常需要采集两幅图像.因此当光学系统发牛变动时,必须重新采集基准光栅图像,不利于快速测量.提出一种从变形光栅图像中获取基准光栅图像信息的测量方法.首先在变形光栅图像中记录基准光栅信息,然后通过傅里叶分析提取基准光栅频率信息,通过图像分析获得基准光栅相位信息,最后重构出一幅完整的基准光栅图像,实现三维物体形貌测量.实验结果验证了该方法的可行的.     

On-line phase measuring profilometry based on a single frame of deformed pattern

Three frames of deformed patterns are needed at least in conventional Phase Measuring Profilometry (PMP). It is generally applied to the profile measurement of a static object. For on-line measurement, because of the moving object, it is difficult to capture three or more frames of deformed patterns that satisfy the requirement of PMP. A new method of on-line 3-D shape measurement through only one frame deformed pattern in PMP is presented. A static sinusoidal fringe is projected and any one frame of real-time deformed patterns is captured by CCD. N frames of sub-images are extracted from the captured deformed pattern. Improved Stoilov algorithm is proposed to get phase. Computer simulation and experimental results show its feasibility and affectivity to reconstruct a 3-D shape and the accuracy is higher than Fourier Transform Profilemetry (FTP) which is also a method that only needs one frame of deformed pattern.     

主动离焦三维测量的调制度全局计算方法

提出了离焦三维测量的全局计算方法。通过向物体投射正弦光栅,使物体上任一点的光分布在光栅频率(局域傅里叶变换)处的光强度等于该处的调制度,利用拍摄物体的两幅离焦像的调制度之比,得到了物体的深度分布。不但消除了过去主动离焦三维测量采用局域傅里叶变换带来的测量误差,同时计算程序简单、速度快,具有较好的实用性。     

Surface profile inspection of a moving object by using dual-frequency Fourier transform profilometry

The 2π phase ambiguity caused by surface isolations and large height step can be solved by dual-frequency projection grating profilometry. However, in the Fourier transform profilometry (FTP) of a moving object, only one single deformed fringe pattern can be obtained. In order to introduce the dual-frequency technique into the FTP of moving object, a novel experimental system is designed to capture two fringe patterns with different frequency at the same time. A grating structure comprising two regions with different frequencies is projected upon the surface of the detected object. Two line-scan CCD cameras are used to capture the surface images encoded by the two kinds of patterns, respectively. By getting the corresponding image intensity at the same point of the object surface in the two acquired images, the dual-frequency technique is applied to extract the real phase without phase ambiguity. The surface profile of a specimen with a large height step is measured to prove the feasibility of the proposed method. The experimental results show that the proposed method can solve the 2π phase ambiguity problem successfully in the surface profile inspection of a moving object.     

基于快速傅里叶变换的实时相移校正算法

在相移测量剖面术（ＰＭＰ）中,提出了一种基于快速傅里叶变换的相移校正算法,利用最初多采的一幅条纹图的信息和傅里叶变换调制度模板,快速地计算出当前的相移值。采用该算法,能实时准确地控制投影光栅的移动,大大提高了测量系统的工和自动化程度,具有极大的实用价值。     

Phase measuring profilometry based on elliptically pattern grating

The present study proposes a new method for measuring the surface shape of an object using elliptically pattern grating projection. Based on phase measuring profilometry (PMP), elliptically pattern grating is projected on the surface of the object to measure its shape in 3D. The computing formula for solving the phase by the phase-shifting fringe method is derived, and the 3D shape formula for the altitude is reestablished. The error-contrastive analysis of the object's surface shape is re-established based on the proposed method and traditional PMP. The proposed method was shown to have a strong anti-noise ability and able to measure objects under high noise. More accurate measurement results were obtained by computer simulation and experiment to verify the feasibility of the proposed method.