一种用于在线三维测量的五步非等步相移算法

提出了一种五步非等步相移算法,并成功应用于在线三维测量中。仅投影一固定正弦光栅条纹到物体上,通过物体在线运动产生等效相移,在一个条纹周期范围内任意采集五帧变形条纹图,通过像素匹配使各帧条纹图中的物点一一对应并计算出相应的等效相移量。采用所提出的五步非等步相移算法,即可重构物体。计算机模拟与实验验证了该方法的可行性和有效...     

Fourier transform profilometry: : a review

Fourier transform profilometry is one of the popular non-contact 3-D measurement methods, where a Ronchi grating or sinusoidal grating is projected onto a diffuse three-dimensional surface, and the resulting deformed grating image is detected by a CCD camera and processed by a computer. This method requires only one frame (or two frames) of the deformed fringe pattern in some algorithms to retrieve the surface of measured object, so it has obvious advantage for real time data acquisition and 3-D measurement of dynamic process. In this paper, we review some algorithms in FTP, discuss some important problems, including frequency spectra overlapping, phase unwrapping, sampling, and 3-D measurement of dynamic process. With the development of computer hardware and software and availability of high-resolution image grabber, FTP method will be a promising one for acquiring 3-D data of object, and more and more researchers pay attention to it.     

Shifted-phase calibration for a 3-D shape measurement system based on orthogonal composite grating projection

This paper proposes a novel method for reducing measurement error caused by spectrum overlapping in orthogonal-composite-grating-based 3-D measurement method. For 3-D measurement systems based on orthogonal composite grating projection, spectrum overlapping causes phase of each deformed phase-shifting fringe changed differently, which violates the principle that the shifted phases between adjacent deformed fringes must be equivalent to 2π/3, and therefore results in phase measurement error. The proposed shifted-phase calibration method is based on that phase variation of each deformed fringe is independent of height and reflectivity of the measured object. Three composite gratings are projected on the reference plane, and each carrier channel includes three phase-shifting gratings needed in phase measuring profilometry (PMP). Because the adjacent phase-shifting fringes demodulated from the same carrier channel have the phase difference of 2π/3, we can respectively calculate the reference plane's phases of three carrier channels by the phase algorithm of PMP method, and the shifted phases between them are obtained. When an object is measured, the shifted phases between deformed phase-shifting fringes can be calibrated. A new 3-D measurement mathematical model is set to reconstruct object. Our experiments prove that the proposed method can effectively restrain the effect of spectrum overlapping and improve measurement accuracy almost one times.     

Profile measurement of a moving object using an improved projection grating phase-shifting profilometry

3-D profile measurement of a moving object using a novel phase-shifting technique is introduced. Digital gratings with two steps phase-shifting are projected periodically onto a measured object surface. The deformed fringe patterns are captured by a frame CCD camera within a short exposure time. By synchronizing the projector and the CCD camera accurately, there is an overlapping part which is the same part of the object among three neighbouring frames. The length of an overlapping part can be controlled as one third of a frame length. Hence the intensity values at the same surface point modulated by three neighbouring gratings can be obtained, and its phase value can be computed by an improved phase-extracting algorithm. The profile of a specimen is detected by the proposed method. Experimental results demonstrate that this method is effective for the profile measurement of a moving object.     

A three dimensional on-line measurement method based on five unequal steps phase shifting

A three-dimensional on-line measurement method based on five unequal steps phase-shifting with phase measuring profilometry is presented. While only one sinusoidal grating pattern is projected onto the measured object moving with the pipe-line, five arbitrary deformed patterns are captured by CCD as the measured object moves within a duty cycle of the grating pattern. The modulation distribution based on Fourier transform profilometry is introduced to realize pixel matching so as to calculate the corresponding equivalent shifted phase on the deformed patterns. A five unequal steps phase shifting algorithm is developed, which is suitable for non-uniform motion of the pipeline. The experiments verify its feasibility and validity.     

A composite-structured-light 3D measurement method based on fringe parameter calibration

This paper proposes a novel method for reducing measurement error caused by spectrum overlapping in composite-structured-light 3D measurement systems. For a composite-structured-light 3D measurement system, spectrum overlapping causes parameters of each deformed phase-shifting fringe to change, and therefore leads to phase measurement errors. The proposed fringe parameter calibration method is based on the fact that variations in each deformed fringe's parameters are independent of height and reflectivity of the measured object. Three frames of composite grating are projected on the reference plane, and each carrier channel includes the information of three phase-shifting sinusoidal gratings used in Phase Measuring Profilometry (PMP). With the parameter calculation formulas of PMP, the parameters of fringes demodulated from the same carrier channel can be calculated, and therefore parameter relation coefficients between fringes demodulated from different carrier channels may be obtained. When an object is measured, these relation coefficients can be used to calibrate the parameters of the deformed phase-shifting fringes. A new 3D measurement mathematical model is established to reconstruct the shape of the object. Experimental data proved that the proposed method can effectively restrain the effect of spectrum overlapping and improve measurement accuracy by more than three times.     

A new pixel matching method using the entire modulation of the measured object in online PMP

A method using entire modulation information of the measured object itself for pixel matching is proposed in online phase measuring profilometry (PMP). Only one fixed sinusoidal grating is projected onto the moving measured object and then five deformed patterns are captured by the imaging system (CCD). Because the contrast of the sinusoidal grating is a constant, the modulation distribution of each deformed pattern reflecting the gray of the measured region can be extracted. The entire modulation of the object cut from one of them is regarded as a template, and then the distance of the measured object's movement between each two adjacent deformed pattern can be calculated by the correlation operation so that we can cut the corresponding parts containing the measured object's information from five deformed patterns. Then the discrete phase can be calculated with Stoilov algorithm. By the phase unwrapping and the mapping algorithm, the object can be reconstructed exactly. A series of simulations and experiments confirm its feasibility and validity.     

一种无需标记的在线三维测量方法

提出了一种无需标记的物体在线三维面形测量方法。将一固定的正弦条纹投影到待测运动物体上,借助物体运动产生等效的相移变形条纹。基于傅里叶变换轮廓术的调制度对各帧变形条纹计算,提取其具有某一特定分布的特征区域,采用相关度最大法,检测各帧变形条纹对应的调制度特征区域的位移量来检测出物体的移动,从而实现像素匹配,得到一组像素坐标完全一一对应的等效相移变形条纹图。利用Stoilov相移算法得到物体的截断相位,利用位相展开算法展开位相,通过位相和高度映射即可实现在线移动物体的面形测量。通过计算机仿真验证了该方法的可行性。     

基准光栅重构傅里叶变换轮廓术

应用傅里叶轮廓变换术进行三维形貌测量中,为了获得待测物体的高度相位信息,通常需要采集两幅图像.因此当光学系统发牛变动时,必须重新采集基准光栅图像,不利于快速测量.提出一种从变形光栅图像中获取基准光栅图像信息的测量方法.首先在变形光栅图像中记录基准光栅信息,然后通过傅里叶分析提取基准光栅频率信息,通过图像分析获得基准光栅相位信息,最后重构出一幅完整的基准光栅图像,实现三维物体形貌测量.实验结果验证了该方法的可行的.     

A novel color fringe projection based Fourier transform 3D shape measurement method

A novel Fourier transform 3D shape measurement method based on color fringe projection is proposed in order to solve the spectrum overlapping and phase unwrapping problems existed in Fourier transform profilometry (FTP). The R and G components of the color fringe are set to two sinusoidal patterns with different frequencies and the B component is set to the average value of R or G component. Then this pattern is projected to the object and the deformed fringe image is captured. Three gray patterns are separated from the color fringe, the background and high frequency noise can be eliminated using our method and the accurate unwrapped phase can be got. Only one shot color pattern is projected to get the 3D information of the object. Experiment results show that the 3D information of an object can be obtained rapidly and accurately.     

On-line phase measuring profilometry based on phase matching

On-line phase measuring profilometry based on phase matching is proposed. While just one fixed sinusoidal fringe is projected on a measured object moving with the pipeline, deformed patterns modulated by the object moving at the same distance moment are captured synchronously by the CCD camera. The phase information of the object in those captured deformed patterns can be predicted using FTP method to assist the pixel matching so as to realize the point-to-point correspondence of the object in the captured deformed patterns. Meanwhile, the equivalent phase-shifting deformed patterns can be extracted. So the three dimensional shape of the object can be reconstructed successfully with an equal phase-shifting algorithm. Numerical simulation and experiments show feasibility and validity of the proposed method.     

基于SURF算法的在线三维测量方法

提出了一种采用加速鲁棒特征算法匹配运动物体的特征点,实现在线三维测量的方法.该方法只需投影一固定的正弦光栅到在线运动中的被测物体表面上,使投影光栅线垂直运动方向,当物体每移动相同的距离,由CCD采集到相应的变形条纹图,从中提出对应的背景光场,借助SURF算法对各帧背景光场的物体进行特征匹配,即可获得一组具有等步相移量的等效相移条纹图,从而采用等步相移算法可重构出在线运动物体的三维面形.实验验证了该方法的有效性和可行性,并与在线FTP方法进行了比较,所提方法的平均绝对误差小于在线FTP方法的二分之一,均方根误差小于在线FTP方法的四分之一.     

Computer Simulation of a 3-D Sensing System with Structured Illumination

A computer simulation system of three-dimensional sensing with structured illumination is presented. It includes the generation of deformed fringe patterns from 3-D shapes and the reconstruction of 3-D shapes, conversely. Some experimental results of the deformed fringe pattern and the reconstructed object shapes are presented. We have also discussed the effect of some major system parameters on the measurement results and considered how to correct these parameters according to the measurement result of the standard plane. Using this simulation system, the major system parameters: environmental conditions, measurement accuracy and algorithm evaluation of the 3-D shape measurement system based on PMP, FTP, SPM, etc., can be researched. © 1997 Elsevier Science Ltd. All rights reserved.     

三维形貌测试系统中的数字信号处理技术

本文采用一种基于数字滤波的正文解调算法,用于三维形貌测试系统中相位分布的计算。文中考察了频域理想低通滤波器、三阶巴特沃思滤波器、有限冲击响应滤波器以及空域均值滤波器,通过分析滤波器性能和比较处理结果,得出均值滤波器或有限冲击响应滤波器比较适用于类似于变形光栅的窄带信号。采用数字处理方法,可以由一帧变形光栅图迅速、精确地重建物体的形貌。     

复杂刚性运动物体的高精度三维测量算法

基于相移法的三维形貌重建精度高,对环境噪声和阴影等不敏感,但由于多幅条纹解相位,难以应用于动态物体的三维测量中,为此,提出了一种新的算法.基于Harris算法提取刚性运动棋盘格的角点,确定相邻两帧采集条纹图像之间的像素偏差并校正采集条纹图像;根据投影仪和摄像机的标定参数建立投影图像和采集图像之间的空间变换矩阵,并根据变...     

Phase measuring profilometry based on elliptically pattern grating

The present study proposes a new method for measuring the surface shape of an object using elliptically pattern grating projection. Based on phase measuring profilometry (PMP), elliptically pattern grating is projected on the surface of the object to measure its shape in 3D. The computing formula for solving the phase by the phase-shifting fringe method is derived, and the 3D shape formula for the altitude is reestablished. The error-contrastive analysis of the object's surface shape is re-established based on the proposed method and traditional PMP. The proposed method was shown to have a strong anti-noise ability and able to measure objects under high noise. More accurate measurement results were obtained by computer simulation and experiment to verify the feasibility of the proposed method.     

BP neural network applied to 3D object measurement based on fringe pattern projection

In the fringe projection profilometry, the traditional triangle method, such as Fourier-transform profilometry (FTP), is difficult to recover the stepped shape object from the deformed fringe pattern. In order to solve this problem, the neural network is introduced to deal with this kind of fringe patterns and gain the three-dimensional (3D) information of the measured object. By training the network, the relationship between the deformed fringe pattern and the height of the object can be obtained, and thereby the height of the object can be obtained. Furthermore, the object can be reconstructed perfectly without knowing the optical parameters of the experiment system. An obvious merit of this network method is that it can recover the 3D object in a short time and only need one deformed fringe pattern. Computer simulations and experiment validate the feasibility of the method.     

Neural network applied to reconstruction of complex objects based on fringe projection

The neural network has been introduced into the reconstruction of the complex object based on fringe projection. In this method, the neural network with powerful property of approximation is used to get the continuous approximate function of a discrete fringe pattern captured by an image frame grabber. The depth-related phase of the measured object modulated into the fringe pattern can be demodulated by dealing with the approximate function. Compared with the Fourier transform profilometry (FTP), in the network method, one deformed fringe pattern is needed to reconstruct the tested object, and a high spatial resolution is maintained for no filtering process. Therefore, this method performs better than FTP in the measurement of the complex object. Moreover, the network method is capable of demodulating more depth-related phase even in the case that the local shadow exists in the fringe pattern. Computer simulations and experiments validate the feasibility of this method.     

基于双色条纹投影的快速傅里叶变换轮廓术

在实际傅里叶变换轮廓术测量中，获取的条纹图扩展的零频分量对傅里叶变换轮廓术的测量精度和测量范围有很大影响，甚至妨碍正确三维面形的恢复。π相移技术常被用来消除零频分量对测量的影响，但需要在测量系统中安装精密相移装置，并需要采集两帧具有π相位差的条纹图。传统傅里叶变换轮廓术中，完成精密相移需要较长的时间，影响了傅里叶变换轮廓术测量方法的实时性。提出了采用双色正弦光栅投影来实现从一帧条纹图中消除零频对傅里叶变换轮廓术测量的影响。该方法同传统的π相移方法相比，不需要相移装置，测量系统简单，并且能真正实现高速测量。     

单幅彩色条纹投影的不连续物体表面三维形貌测量

提出了基于单幅彩色条纹投影的不连续物体及动态三维形貌的测量方法。该方法利用计算机产生一幅正弦条纹图和两幅单一强度图分别通过红蓝绿三个通道合成为一幅彩色条纹图,由液晶投影仪投影到被测物体表面,彩色CCD采集变形条纹图并保存在计算机中。通过三色分离,同时获得正弦条纹图和反映表面反射率分布及背景信息图,通过图像除法运算及亚像素精度归一化处理实现物体三维形貌的恢复。对于表面形貌不连续的物体,利用蓝色分量的灰度图像进行二值化处理定位阴影或暗背景,从而引导正确的相位求解。实验验证了该方法对不连续物体动态测量方面的可行性。