CeO2改性Cu/Al2O3催化剂上甲醇水蒸气重整制氢

研究CeO2改性Cu/Al2O3催化剂上甲醇水蒸气重整制氢反应过程,得到低温活性、氢选择性和稳定性较好的催化剂.Cu/A12O3催化剂中添加CeO2提高了催化剂的活性和稳定性,当CeO2质量分数为20%时,催化剂活性表现最佳.在反应温度250℃,水醇摩尔比为1.0,液体空速为3.28 h-1条件下,甲醇转化率为95.5%,氢气选择性为100%.此外,CeO2通过促进水气转化反应降低了重整气中CO的含量.Cu/CeO2/Al2O3催化剂在200 h的寿命实验中,活性仍保持在90.0%以上,而Cu/Al2O3催化剂在100 h的寿命实验中,活性已很快下降.XRD和TPR分析及表面元素分布结果表明,铜和铈相互作用促进了铜在催化剂表面的高度分散,阻止了铜晶粒团聚、烧结,促使铜晶粒细小化,促进了铜的还原,改善了Cu/CeO2/Al2O3催化剂的性能.     

CeO2改性Cu/Al2O3催化剂上甲醇水蒸气重整制氢

研究CeO2改性Cu/Al2O3催化剂上甲醇水蒸气重整制氢反应过程,得到低温活性、氢选择性和稳定性较好的催化剂.Cu/Al2O3催化剂中添加CeO2提高了催化剂的活性和稳定性,当CeO2质量分数为20％时,催化剂活性表现最佳.在反应温度250 ℃,水醇摩尔比为1.0,液体空速为3.28 h －1条件下,甲醇转化率为95.5％,氢气选择性为100％.此外,CeO2通过促进水气转化反应降低了重整气中CO的含量.Cu/CeO2/Al2O3催化剂在200 h的寿命实验中,活性仍保持在90.0％以上,而Cu/Al2O3催化剂在100 h的寿命实验中,活性已很快下降.XRD和TPR分析及表面元素分布结果表明,铜和铈相互作用促进了铜在催化剂表面的高度分散,阻止了铜晶粒团聚、烧结,促使铜晶粒细小化,促进了铜的还原,改善了Cu/CeO2/Al2O3催化剂的性能.     

铜物种对Cu/Fe_2O_3水煤气变换反应催化剂性能的影响

采用共沉淀法制备了系列铜负载量不同的Cu/Fe2O3水煤气变换(WGS)催化剂,并考察了铜负载量对催化剂结构和水煤气变换反应性能的影响.结果表明,Cu/Fe2O3催化剂呈现出良好的水煤气反应性能,当CuO质量分数为20%时,催化剂的WGS性能最优,250°C时CO转化率高达97.2%,同时热稳定性也最好.运用X射线粉末衍射(XRD)、N2物理吸脱附和H2程序升温还原(H2-TPR)等手段对Cu/Fe2O3催化剂的物相、织构特征及还原性能进行了表征,结果表明,CuFe2O4物种的存在极大地改善了催化剂的还原性能和WGS反应活性.这是由于CuFe2O4特殊的尖晶石结构有利于Cu微晶的稳定;同时,CuFe2O4在低温下即被还原为单质铜,有利于促进催化剂体系中电子的转移.此外,通过(NH4)2CO3溶液处理,研究了独立相CuO对Cu/Fe2O3催化剂WGS反应性能的影响,结果发现,独立相CuO的存在,有利于H原子在各组分传递,从而促进催化剂的CuFe2O4的还原,改善Cu/Fe2O3催化剂的WGS反应性能.     

MO(M=Cu和Ni)/TiO2/-Al2O3催化剂在CO+O2反应中的活性

采用X射线衍射(XRD),程序升温还原(TPR)等表征手段考察了TiO2改性对CuO(或NiO)在γ-Al2O3表面上分散以及还原性能的影响,同时检测了这些改性的催化剂在CO+O2反应中的活性.结果表明:TiO2的改性使得CuO和NiO在γ-Al2O3载体上的分散复杂化,产生了多种状态的氧化铜(氧化镍)物种.当负载量低于其在γ-Al2O3上的分散容量(0.56 mmol Ti4+/100 m2γ-Al2O3)时,TiO2的加入主要是抑制了CuO和NiO在γ-Al2O3载体上的分散;而当负载量远大于其分散容量时,出现了CuO和NiO在晶相TiO2(锐钛矿)上的分散.无论其负载量如何,TiO2的加入促进了CuO的还原.因此,在250℃的CO+O2反应中,改性的催化剂中具有更多的活性位,因而显示出更高的活性;相反,TiO2的改性则抑制了NiO的还原.因此,在350℃的CO+O2反应中,可还原的氧化镍的量明显少于未经改性的催化剂,导致改性催化剂的活性降低.     

钾负载量对CuO/K_2CO_3/MgAl_2O_4催化剂高温NO_x储存还原性能的影响

制备了适用于高温氮氧化物储存还原(NSR)反应的Cu O/K_2CO_3/MgAl_2O_4非贵金属催化剂,考察了钾负载量对催化剂NSR性能的影响,发现钾主要以高分散K_2CO_3和体相K_2CO_3的形式存在.在稀燃条件下,NOx在体相K_2CO_3上形成了高温稳定的硝酸盐物种,而高分散K_2CO_3上形成的硝酸盐的高温稳定性则较差.当钾负载量较低时,催化剂的NOx储存能力有限,K_2CO_3主要以高分散形式存在,稀燃阶段形成的硝酸盐的热稳定性较低,高温NSR活性较低;而钾负载量过高时,K_2CO_3则会覆盖Cu O活性位,从而降低催化剂的NSR活性.在450℃的高温条件下,钾负载量为10%时,所制备催化剂的NOx储存还原能力最佳,NOx还原效率达到99.9%,是一种具有潜在应用前景的高温NSR催化剂.     

CuO-Ag2O/γ-Al2O3催化剂的TPR特性及氧化活性研究

采用程序升温还原技术(TPR)研究CuO-Ag2O/γ-Al2O3双组分及其单组分催化剂的还原特性以及热处理温度对其还原性能的影响。发现不同负载量的Cuo-Ag2O/γ-Al2O3催化剂的还原特性有明显差异, 反映出催化剂表面存在着不同种类的铜物种。Ag2O的存在, 使催化剂的TPR峰位与单组分CuO/γ-Al2O3的TPR曲线产生明显差异, 还原峰发生位移, 随Ag2O添加量的增加, 位移增大。对苯的完全氧化反应结果表明, 催化剂的氧化活性次序为:CuO-Ag2O/γ-Al2O3>CuO/γ-Al2O3>Ag2O/γ-Al2O3。热处理温度升高, 使催化剂表面铜物种分散状态及其还原性能发生变化。从500~900℃, 存在一个使铜物种达到最佳分散态的温度。讨论了负载于γ-Al2O3载体上的CuO-Ag2O双组分及其单组分催化剂在还原过程中金属与载体, 金属与金属间的相互作用以及热处理温度对其还原性能的影响。     

La2O3对Cu/Al2O3甲醇水蒸气重整制氢催化剂性能的影响

采用并流共沉淀法制备了系列Cu/La2O3/Al2O3甲醇水蒸汽重整制氢催化剂, 并通过X射线衍射(XRD), 程序升温还原(TPR) 和光电子能谱 (XPS) 等分析方法研究了La2O3对Cu/Al2O3甲醇水蒸汽重整制氢催化剂性能的影响. 结果表明 La2O3的加入促进了铜在催化剂表面的高度分散, 阻止了铜晶粒团聚、烧结, 促使铜晶粒细小化, 促进了铜的还原, 从而改善了催化剂的性能, 提高了催化剂的活性.     

CuO/Mn2O3 /γ-Al2O3催化剂的制备、表征及其在CO氧化反应中的性能研究

采用浸渍法在γ-Al2O3载体上分步负载改性剂Mn2O3和活性组分CuO,制备了一系列不同配比的CuO/Mn2O3/γ-Al2O3催化剂,并运用CO+O2模型反应、XRF、XRD、H2-TPR、in-situ FTIR等手段表征了催化剂的活性和物理化学性质。活性测试结果表明,锰氧化物对γ-Al2O3载体的改性能有效地提高CuO/γ-Al2O3催化剂在CO+O2模型反应中的催化活性。XRD结果表明,锰氧化物对γ-Al2O3载体的改性可以促进氧化铜在载体表面的分散,从而提高了分散态氧化铜的含量,不过这与活性变化的趋势并不完全一致。进一步结合H2-TPR、in-situ FTIR表征结果 ,我们发现,分散态铜、锰氧化物的还原性质也是影响其催化活性的重要因素,催化剂中分散态铜、锰物种越容易被还原,其对CO+O2模型反应的催化活性就越高。     

Cu-Zn-Zr/SBA-15介孔催化剂的制备及CO2加氢合成甲醇的催化性能

以具有骨架结构的SBA-15介孔分子筛为载体,采用浸渍法合成了具有高比表面积、不同金属氧化物含量的Cu-Zn-Zr介孔催化剂CZZx/SBA-15(x=0.3,0.4,0.5,0.6).采用N2吸附-脱附(BET)、X射线衍射(XRD)、H2程序升温还原(H2-TPR)、CO2吸附(CO2-TPD)和透射电子显微镜(TEM)等手段对样品进行了表征.在固定床反应器上评价了其CO2加氢合成甲醇的催化性能.实验结果表明,CZZx/SBA-15催化剂具有介孔结构,负载的Cu O,Zn O和Zr O2能够很好地分散在表面,并且负载氧化物晶粒尺寸不同.催化剂的铜比表面积SCu与甲醇催化活性呈近似线性关系,其中CZZ0.4/SBA-15催化剂表现出最大甲醇选择性(54.32%),与CZZ相比,甲醇选择性增加24.85%.随着金属氧化物负载量的增大,催化剂比表面积和SCu明显减小,甲醇选择性与收率也相应减小,负载型CZZx/SBA-15催化剂表面结构对CO2加氢合成甲醇反应活性起关键作用.     

纳米孔炭负载 MnOx 催化剂上苯甲醇氧化反应性能

 以纳米孔炭 (NC) 为载体, 采用浸渍法制备了一系列 MnOx/NC 催化剂, 并用于以空气为氧源的苯甲醇液相氧化反应. 通过 X 射线衍射、X 射线光电子能谱、N2 吸附-脱附和 H2-程序升温还原等手段对催化剂进行了表征, 考察了催化剂中 Mn 负载量和焙烧温度, 以及反应条件等对反应性能的影响. 结果表明, 10%MnOx/NC 催化剂的活性较高, 反应 4 h 后苯甲醇转化率可达 80.4%; 明显高于活性炭负载的 MnOx 催化剂. 这主要归因于其表面存在大量高分散、且易于还原的 Mn 物种.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.