An ultra-broadband metamaterial absorber based on the hybrid materials in the visible region

In this paper, an ultra-broadband metamaterial absorber is successfully designed in the visible region. The structure of the absorber is just obtained by the two-dimensional plane structure which rotate 90° along x-axis. Furthermore, the formation of the structure for the hybrid materials is based on the four U-shaped structure of the metal titanium is embedded in the semiconductor (indium antimonide). The simulated results show that the proposed metamaterial absorber can achieve an ultra-broadband absorption with greater than 90% from 252.2 to 822.3 THz, and the relative absorption bandwidth gets to 106.1%. Finally, the simulated electric field, surface current and power loss density distributions further illustrate the absorption mechanism of the metamaterial absorber. And we believe the metamaterial absorber will have many potential applications in energy harvesting and stealth devices.     

A broadband,polarisation-insensitive and wide-angle coplanar terahertz metamaterial absorber

Broadband terahertz metamaterial absorbers have attracted considerable attention due totheir significant potential for practical applications. These absorbers are usuallystacked in several differently shaped or sized subunits to form a unit cell, making theirfabrication quite troublesome. A simple design for broadband metamaterial absorbers istherefore urgently needed. Herein, we propose a coplanar broadband andpolarisation-insensitive perfect absorber formed by two patterned square metallic ringswith a dielectric layer on top of a metallic ground plane. The full width at half maximum(FWHM) of the device can be up to 42% (with respect to the central frequency), which is 2times greater than that of a single-layered structure. This property is retained well fora very wide range of incident angles. The two patterned square rings resonating atdifferent but similar frequencies leads to the broadband absorption. Moreover, ahybridised resonance model is proposed to analyse the origin of the resonance bandwidth.The results of this metamaterial absorber design appear to be very promising for solarcell, detection and imaging applications.     

基于圆台结构的超宽带极化不敏感太赫兹吸收器

本文提出一种基于圆台形吸收单元的超宽带、极化不敏感的超材料太赫兹吸收器. 该超材料吸收器采用金属薄膜金和介质层二氧化硅交替叠加的多层结构. 采用商业软件CST Studio Suite 2009时域求解器计算了其在0–10 THz波段内的吸收率A（ω）,在2–10 THz之间实现了对入射太赫兹波的超宽频带强吸收. 仿真结果表明,由于其圆台形单元结构,在器件垂直方向上形成一系列不同尺寸的微型吸收器,产生了吸收频点相连的多频吸收峰. 利用不同吸收峰的耦合叠加效应,获得超过8 THz的超宽带太赫兹波吸收,吸收强度达到92.3%以上. 这一结构具有超宽带强吸收,360°极化不敏感以及易于加工等优越特性,因而在太赫兹波探测器、光谱成像以及隐身技术方面具有潜在的应用. 关键词： 太赫兹波 超材料吸收器 圆台结构 超宽带     

Microelectromechanical systems bimaterial terahertz sensor with integrated metamaterial absorber

This Letter describes the fabrication of a microelectromechanical systems (MEMS) bimaterial terahertz (THz) sensor operating at 3.8 THz. The incident THz radiation is absorbed by a metamaterial structure integrated with the bimaterial. The absorber was designed with a resonant frequency matching the quantum cascade laser illumination source while simultaneously providing structural support, desired thermomechanical properties and optical readout access. Measurement showed that the fabricated absorber has nearly 90% absorption at 3.8 THz. A responsivity of 0.1°/μW and a time constant of 14 ms were observed. The use of metamaterial absorbers allows for tuning the sensor response to the desired frequency to achieve high sensitivity for potential THz imaging applications.     

Optical metamaterial absorber based on leaf-shaped cells

We present the model of an infrared metamaterial absorber composed of metallic leaf-shaped cells, dielectric substrate, and continuous metallic film. Numerical simulation confirms an absorptivity of 99.3% at the infrared frequency of 126.7 THz with this metamaterial model. The proposed metamaterial absorber could be fabricated with an electrochemical deposition technique. Our simulated results show the absorption feature of this metamaterial absorber could be well manipulated with different incident angles and radiation modes. The optical metamaterial absorber proposed in this paper has potential applications such as infrared imaging devices, thermal bolometers, wavelength-selective radiators, and optical bistable switches.     

Extremely-broad band metamaterial absorber for solar energy harvesting based on star shaped resonator

A new metamaterial absorber (MA) is investigated and shown numerically for solar energy harvesting for future solar cell applications. The structure consists of two metals and one dielectric layer having different thicknesses. Owing to this combination, the structure exhibits plasmonic resonance characteristics. In the entire spectrum of visible frequency region, the obtained results show that investigated structure has perfect absorptivity which is above 91.8%. Proposed structure also has 99.87% absorption at 613.94 THz and 99% absorption between 548 and 669 THz. The proposed structure also shows both polarization and angle independency for the entire visible region. The MA based solar cell proposes high absorption with an upper ratio of 90% in the widest range of visible spectrum comparing to the studies in literature. Hence, the proposed metamaterial absorber solar cells can be used for invisibility in entire spectrum of visible light. The absorption characteristics of the solar absorber are also investigated for infrared and ultraviolet region. The enhancement of absorption of the structure will provide new type of sensors in these frequency ranges.     

Wideband optical absorber based on plasmonic metamaterial cross structure

The optical absorber with Fano response is valuable for various applications such as solar cells or optical sensors. In this paper, we have modeled an optical plasmonic metamaterial absorber which contains a broken cross as an elementary cell along with four rectangular loads to improve the absorbance and achieve a Fano response within a wide bandwidth at 190–245 THz (25%). The bandwidth of the proposed structure is more than conventional metamaterial absorbers. The prototype absorber has a remarkable enhancement in the electric field in comparison with the simple cross model and the reflection value has reduced to ??47 dB. The parametric studies show how the gap capacitance controls the bandwidth, resonance frequency and the reflection value of the absorber, therefore we can consider this technique as a way to enhance the metamaterial absorber’s bandwidth. The proposed structure can be used as an optical refractive index sensor while the Fano line-shape provides a higher figure of merit (FOM) compared with many others. For this structure, the FOM has obtained as 10,660. The Finite Integration Technique with Perfect Boundary Approximation used for the simulation.     

基于石墨烯和二氧化钒的太赫兹宽带可调谐超材料吸收器

太赫兹超材料吸收器作为一种重要的太赫兹功能器件,被广泛应用于生物医学传感、电磁隐身、军用雷达等多个领域.但这种传统的超材料吸收器结构具有可调谐性差、功能单一、性能指标不足等缺点,已经无法满足复杂多变的电磁环境的要求,因此可调谐超材料吸收器逐渐成为了太赫兹功能器件领域的研究热点.为实现超材料吸收器吸收特性的调谐,通常从调...     

Broadband visible metamaterial absorber based on a three-dimensional structure

In this paper, a broadband metamaterial absorber is successfully designed by a three-dimensional structure. And the three-dimensional absorber is just obtained by a two-dimensional structure which rotates 90°along x-axis. The simulated results show that the absorption of the three-dimensional metamaterial absorber is much better than the two-dimensional absorber. Moreover, the absorber is polarization-sensitive for the incident electromagnetic waves due to the asymmetry of the structure. Compared with the Y-polarization wave, the proposed absorber can realize broadband absorption with greater than 90% from 355.6 to 737.7 THz for X-polarized wave. Finally, based on the analysis of the electric field and surface current distributions, it can demonstrate that the localized surface plasmons and dipoles resonances will play an important role in the broadband absorption. And we believe that the metamaterial absorber will have many potential applications in emitter and energy harvesting.     

An ultra-broadband and highly-efficient tunable terahertz polarization converter based on composite metamaterial

A near perfect, ultra-broadband and highly-efficient terahertz reflective polarization converter based on multilayer metamaterial is proposed in this paper. The hybrid metamaterial unit structure consists of a split-ring metal pattern and a metal sheet separated by a dielectric resonator spacer. The polarization conversion ratio (PCR) is above 90% from 2.06 to 4.26 THz, with an optimal range between 2.98 and 4.16 THz where the efficiency is above 98% for normal incidence. It also shows excellent performance for oblique incidences. Moreover, the working band and the optimized frequency range for the polarization conversion can be manipulated by changing the open angle between the metallic arcs and the substrate thickness, respectively. Based on this design, two types of hybrid metamaterial converters are also investigated to swith off polarization conversion altogether or modify the polarization conversion bandwidth. A polarization converter with temperature controlled PCR is realized by adding a vanadium oxide (VO₂) mask on the designed structure. In addition, by integrating photoconductive silicon islands between the split-ring and metal bar a dual-band polarization converter can be realized. Combining with a polarizer, this window can act as an active THz filter.     

基于二氧化钒宽、窄带可切换的双功能超材料吸收器研究

本文提出了一种宽、窄带可切换的双功能超材料吸收器.在超材料吸收器的结构中,引入了相变材料二氧化钒(VO2),仅利用单个可切换超表面就能实现不同的功能,其不同功能之间的相互转换通过VO2绝缘态和金属态之间的可逆相变特性实现.当VO2处于金属态时,设计的结构可以看作一个超材料宽带吸收器.仿真结果表明,在1.55THz至2....     

基于超材料的偏振不敏感太赫兹宽带吸波体设计

本文设计了一种基于超材料的偏振不敏感太赫兹宽带吸波体.吸波体包含两层金属和一层中间介质,表面金属层每一个周期单元由五种尺寸接近的金属块按照相邻不同的规律排列成5×5的方形阵列.各种尺寸金属块分别产生单峰谐振吸收,五个谐振吸收峰相互靠近从而产生宽带吸收.通过研究吸波体表面电流和电场z分量分布情况可知,入射太赫兹能量的吸收主要是由y方向上电场引起的电偶极子振荡和z方向上磁场引起的磁极化产生,而且金属层的欧姆损耗起主要作用.仿真结果表明,吸波体吸收率在80%以上的带宽约为1.2 THz,最高吸收率可达98.7%,半峰全宽(FWHM)为1.6 THz,该宽带吸波体的厚度约为中心波长的二十分之一,对偏振方向不敏感,且能实现大角度吸收,在太赫兹频段的电磁隐身、测辐射热探测器以及宽带通信等领域有潜在的应用价值.     

A design of ultra-broadband metamaterial absorber

In this paper, an ultra-broadband, wide-angle polarization-insensitive metamaterial absorber is designed at microwave frequencies. The absorber consists of a periodic array of metallic strips with the lumped resistances fabricated on a dielectric substrate with a ground plane. The proposed absorber is single-layered and symmetric, thus leading to very thin and polarization-insensitive characteristics. According to the surface current distributions, the proposed absorber can operate three resonant modes including two dipole resonances and an LC resonance. By adjusting the geometry and lumped resistances of the structure, three resonant modes can be effectively connected together, and thus an ultra-broadband response can be realized. The simulated and experimental results demonstrate that the proposed absorber produces a good absorption above 80% at normal incidence and above 60% at oblique incidence with the incident angle smaller than 45° between 6 and 16.2 GHz.     

A terahertz polarization insensitive dual band metamaterial absorber

Metamaterial absorbers have attracted considerable attention for applications in the terahertz range. In this Letter, we report the design, fabrication, and characterization of a terahertz dual band metamaterial absorber that shows two distinct absorption peaks with high absorption. By manipulating the periodic patterned structures as well as the dielectric layer thickness of the metal-dielectric-metal structure, significantly high absorption can be obtained at specific resonance frequencies. Finite-difference time-domain modeling is used to design the structure of the absorber. The fabricated devices have been characterized using a Fourier transform IR spectrometer. The experimental results show two distinct absorption peaks at 2.7 and 5.2?THz, which are in good agreement with the simulation. The absorption magnitudes at 2.7 and 5.2?THz are 0.68 and 0.74, respectively.     

基于电谐振单元的超介质吸波材料及矩形波导匹配终端应用研究

针对在自由空间中测试超介质吸波材料的高复杂性及高成本特点, 实验研究了4种由电谐振单元构成的超介质吸波材料在X波段(8–12 GHz)矩形波导里的吸波性能. 实验结果表明, 此4种吸波材料在终端短路的矩形波导里显示出与其在自由空间中相似的吸波性能及吸波机理.据此, 进一步研究了基于超介质吸波材料的矩形波导匹配终端应用. 分析结果显示, 此种新型匹配终端具有结构紧凑、工作频段可简单控制、成本低等优点. 通过展宽超介质吸波材料的吸波频段可设计出宽频带的矩形波导匹配终端. 关键词： 电谐振单元 超介质 吸波材料 匹配终端     

Broad band metamaterial absorber based on wheel resonators with lumped elements for microwave energy harvesting

A new metamaterial absorber structure is designed and characterized both numerically and experimentally for microwave energy harvesting applications. The proposed structure includes four wheel resonators with different dimensions, from which the overall response of the structure can then be obtained by summing all the overlapping frequency responses corresponding to each dimension. The essential operation frequency range of the wheels is selected in such a way that the energy used in wireless communications and found within the environment that we live is absorbed. The dimensions are obtained using parametric study and genetic algorithm to realize wideband absorption response. When the simulation and measurement results are taken into account, it is observed that the metamaterial absorber based harvester has potential to absorb and convert microwave energy with an absorption ratio lying within the range of 80 and 99% for the frequency band of 3–5.9 and 7.3–8 GHz. The conversion efficiency of the structure as a harvester is found to be greater than 0.8 in the interval of 2–5 GHz. Furthermore, the incident angle and polarization dependence of the wheel resonator based metamaterial absorber and harvester is also investigated and it is observed that the structure has both polarization and incident angle independent frequency response with good absorption characteristics in the entire working frequency band. Hence, the suggested design having good absorption, polarization and angle independent characteristics with wide bandwidth is a potential candidate for future energy harvester using wireless communication frequency band.     

多频与宽频超材料吸收器

提出了多频与宽频超材料吸收器结构模型, 该吸收器是由刻蚀在介质基板两面的金属图案组成, 其正面是由不同大小的金属铜圆片和金属铜圆环结构组合而成, 反面完全覆盖金属铜. 由于不同几何大小的圆片或圆环结构的谐振频率不同, 且是相互独立的. 因此通过将两种不同几何大小的圆片与圆环结构组合, 使其在不同频率谐振, 便可得到双频吸收器; 而将三种不同几何大小的圆片和圆环结构组合便可得到三频吸收器; 同理可得到四频吸收器. 同时, 通过研究吸收器的电场分布, 验证了不同几何大小的圆片或圆环结构在不同频率谐振. 若通过优化组合圆片和圆环结构, 使其谐振频率紧密相连则可得到宽频吸收器. 关键词： 吸收器 超材料 多频 宽频     

极化控制的双波段宽带红外吸收器研究

红外吸收器在红外隐身、辐射制冷、红外探测、传感器等方面有重要的应用前景.一维光栅型吸收器由于其结构简单、易于加工的优势备受关注,然而其不足之处是频带很窄,且只对一种极化有效.本文提出了一种基于简单一维周期结构的双波段宽带吸收器,对横磁波和横电波都有效,且吸波频段随入射波的极化方式而改变.该结构的基本单元由八个梯度排列的子单元构成,每个子单元由两层金属-介质双层膜垂直层叠组成.全波仿真结果表明,在1.68—2μm波段,该结构对横磁波吸收超过90%,而对横电波吸收很小(小于6%);在3.8-3.9μm波段,该结构对横电波吸收超过90%,而对横磁波吸收很小(小于5%).另外,该结构具有宽角度吸收特性,当入射角增大到60°时仍然能够保持较高的吸收率和较宽的吸收频带.     

Broadband and ultra-low reflection metamaterial absorber embedded with magnetic materials

In this study, we design, prepare and characterize a broadband, ultra-low reflectivity and incidence angle-insensitive metamaterial absorber. The design of this absorber not only provides a novel idea for the design of broadband absorbers, but also enhances the application prospects of metamaterial absorbers. By introducing FeSiAlp/epoxy magnetic composite and optimizing the structural parameters, the absorption performance of the metamaterial absorber has been significantly improved. The effective absorption bandwidth (bandwidth with reflectivity less than −10dB) is increased by 3.4 times from 2.19 GHz to 7.49 GHz, and the RL_min (minimum reflection loss) value reaches −38.31 dB at 17.83 GHz, that is the absorption rate reaches 99.99%. Meanwhile, the experimental results also verify the simulation design results. Therefore, the absorber not only plays the characteristics of strong absorption of metamaterial, but also absorbs the advantages of broadband of magnetic material.     

基于电磁谐振的极化无关透射吸收超材料吸波体

仿真并实验验证了基于电磁谐振的极化无关透射吸收超材料吸波体, 该吸波体可以实现低频透射和高频吸收.实验测试结果表明, 该吸波体在6.77 GHz 吸收率峰值为83.6%, 半功率带宽为4.3%, 实现窄带强吸收.为进一步拓展该谐振型超材料吸波体的吸收带宽, 利用其低频透射特性, 将两个工作于不同频段的吸波体叠加在一起, 测试结果表明, 复合后超材料吸波体的半功率带宽可以增大到10.9%, 吸收率也略有增强. 该超材料吸波体设计简单, 具有较强的实用性和应用前景. 关键词： 极化无关 透射吸收 超材料吸波体