Propylene Dimerization by（η^5—C9H7）2 Nickel（Ⅱ）Catalytic System

The catalytic performance of Ni(η^5-Ind)2 complex in the dimerization of propylene was studied in combimation with an organoaluminum co-catalyst,eventually in the presence of a phosphine ligand.The effects of the type of aluminum co-catalyst and its relative amount,the nature of phosphine ligand and P/Ni ratio as well as the reaction temperature were examined.The results indicated that the nickel precatalyst exhibited high productivity for the propylene dimerization together with organoaluminum.It was likely to strongly modify the reactivity in the catalytic sytem when using phosphine ligand as additives,especially at the reaction temperature below 0℃.The catalytic system based on Ni(η^5-Ind)2 complex displaed an extremely high productivity(TOF up to 16900h^-1)and a good regioselectivity to 2,3-dimethylbutenes (2,3-DMB) in dimers(66.4%)under proper reaction parameters.     

Synthesis and Characterization of ZSM-5/β Co-Crystalline Zeolite

ZSM-5/β co-crystalline zeolites with different content of ZSM-5 have been synthesized by adding different amount of ZSM-5 to the synthetic system of β zeolite with NaAlO2, silica sol as the source of aluminum and silica, respectively, and TEA as the template under controlled condition of the synthesis. The ZSM-5/β co-crystalline zeolite was studied by XRD, SEM, BET and NH3-TPD. The reaction activity of toluene alkylation was investigated with a mixture of toluene-methanol as the feedstock in a pulse micro-reactor over the ZSM-5/β co-crystalline zeolite. It is found that ZSM-5/β co-crystalline zeolite has two kinds of zeolite structure including ZSM-5 and β zeolite, not in the form of a physical mixture. The pore structure of ZSM-5/β co-crystalline zeolites is different from that for β zeolite, ZSM-5 and their physical mixture. In addition, the peaks of both high and low temperature desorption of ammonia over the ZSM-5/β co-crystalline zeolite shift 23 ℃ to lower temperatures and the acid amount of its strong acid is 3% more than the physical mixture. So the ZSM-5/β co-crystalline zeolite produces the highest content of xylene, which is 10.4% higher than the physical mixture. And the ZSM-5/β co-crystalline zeolite has better selectivity for toluene alkylation and weaker de-methylation than β zeolite, ZSM-5 and their physical mixture.     

ICAR ATRP of acrylonitrile utilizing a moderate temperature radical initiator

Initiators for continuous activator regeneration atom transfer radical polymerization （ICAR ATRP） of acrylonitrile was first conducted at various ambient temperatures （30-45 ℃）. The key to success is ascribed to the usage of an appropriate low temperature radical initiator （2,2＇-azobis（2,4-dimethylvaleronitrile）） and a high reactivity catalytic system （CuBr2/Me6TREN）. The molar ratio of Cu catalyst tO AN as low as 1：20000 wa.s used to prepare well-defined polyacrylonitrile with controlled molecular weight and a narrow polydispersity index range of 1.08-1.30, while the monomer conversion was up to ca. 98%. The apparent activation energy of the polymerization was calculated to be 128.45 kJ/mol, suggesting that the polymerization strongly depended on reaction temperature. The very high chain-end functionality of the resultant polymer was confirmed by ^1H-NMR and GPC analyses as well as chain extension reaction.     

Effect of external surface of HZSM-5 zeolite on product distribution in the conversion of methanol to hydrocarbons

The external surface of HZSM-5 zeolite was passivated by liquid siliceous deposition and by acidic sites poisoning with lepidine, respectively. Then methanol-to-hydrocarbons （MTH） reaction was investigated over the above as-prepared catalysts and the dissoluble coke on these used catalysts was analyzed by GC-MS, to study the role of the external surface of HZSM-5 in the catalytic reaction. Comparison with the experi- mental results based on parent ZSM-5 showed that the product distribution of MTH reaction was obviously influenced by the external surface. Evidences were listed as follows： （1） the final product on parent HZSM-5 showed higher aromatic selectivity, lower olefin selectivity, lower ra- tio of C2/C3＋ aliphatics and higher ratio of C3/C4＋ aliphatics than the reaction mixture produced by the sole catalysis of acidic sites in HZSM-5 channel; （2） a little of pentamethylbenzene and hexamethylbenzene in the product on parent HZSM-5, was produced via multi-methylation of methylbenzene on the external surface. The above conclusion may also be suitable for MTH reaction over other zeolites with 10-ring channel.     

Effect of Dimethyl Ether Co-feed on Catalytic Performance of Methane Dehydroaromatization over Mo／HZSM-5 Catalyst

The effect of dimethyl ether (DME) co-feed on the catalytic performance of methane dehydroaxomatization (MDA) over 6Mo/HZSM-5 catalyst was investigated as a function of DME concentration under reaction conditions of T=1023 K, p=101 kPa and SV=1500 ml/(g.h). A high benzene yield wasobtained and the stability of the catalyst was improved by adding 1.5%DME to the CH4 feed. The C6H6 yield was as high as ca. 10% even after reaction for 6 h. The stability of the catalyst was further improved when DME concentration in the co-feed gas was increased to an appropriate value. TGA and TPO results of the used 6Mo/HZSM-5 catalyst showed that the amount of coke on the used catalyst was reduced and the chemical nature of the coke was changed. When 1.5%DME was added to the CH4 feed, the coke formed on the catalyst could be burned off more easily than that when only CH4 was used as reactant. It is supposed that the oxygen in DME may play a role in preventing the coke burnt off at lower temperature from transforming into the coke burnt off at higher temperature, which results in the improvement of the stability of the catalyst.     

Effect of dispersion and distribution of tungsten on W/HZSM-5 for selective catalytic reduction of NO by acetylene

Catalytic performance of W/HZSM-5 in selective catalytic reduction of NO by acetylene was investigated in a reaction system with 1600 ppm of NO, 800 ppm of C2H2, and 9.95% of O2 in He. It was found that promotional effect of tungsten on the reaction is strongly affected by catalyst preparation conditions and Si/Al ratio of the parent zeolite. A better dispersion of tungsten on HZSM-5 and relatively more monomeric tungsten species were found on 8%W/HZSM-5 prepared by impregnation of the zeolite with lower SiO2/A1203 ratio （25） in ammonic ammonium tungstate solution and calcination of the resulting material at higher temperature （550 ℃）. The highest NO conversion to N2 of 86.3% in the reaction system was obtained at 350 ℃ over the catalyst thus prepared. The mechanism of monomeric tungsten species improving the C2H2-SCR can be attributed to accelerating the formation of active nitrate species.     

Catalytic Systems Containing p-Toluenesulfonic Acid for the Coupling Reaction of Formaldehyde and Methyl Formate

The coupling reaction of formaldehyde(FA)and methyl formate(MF)to form methyl glycolate(MG)and methyl methoxy acetate(MMAc),catalyzed by p-toluenesulfonic acid(p-TsOH)as well as assisted by different kinds of solvents or Ni-containing compounds,had been investigated.The results showed that when the reaction was carried out at 140℃,with a molar ratio of FA to MF of 0.65:1, molar fraction of p-TsOH to total feedstock of 11.0%,and reaction time of 3 h,the yield of MG and MMAc was 31.1% and 17.1%,respectively,p-TsOH catalyzed the coupling reaction by means of the synergistic catalysis of protonic acidity and soft basicity.Adding extra solvents to the reaction system was unfavorable for the reaction.The composite catalytic system consisting of p-TsOH and NiX_2(X=Cl,Br,I)exhibited a high catalytic performance for the coupling reaction,and NiX_2 acted as a promoter in the reaction,whose promotion for the catalysis increased in the following order:NiCl_2相似文献   

富氧条件下乙炔选择催化还原NOx

Acetylene as a reducing agent of metal exchanged HY catalysts, for selective catalytic reduction of NO in the reaction system of 0.16% NO, 0 （C2H2-SCR） was investigated over a series 08% C2H2, and 9.95% O2 （volume percent） in He. 75% of NO conversion to N2 with hydrocarbon efficiency about 1.5 was achieved over a Ce-HY catalyst around 300 ℃. The NO removal level was comparable with that of selective catalytic reduction of NOx by C3H6 reported in literatures, although only one third of the reducing agent in carbon moles was used in the C2H2-SCR of NO. The protons in zeolite were crucial to the C2H2-SCR of NO, and the performance of HY in the reaction was significantly promoted by cerium incorporation into the zeolite. NO2 was proposed to be the intermediate of NO reduction to N2, and the oxidation of NO to NO2 was rate-determining step of the C2H2-SCR of NO over Ce-HY. The suggestion was well supported by the results of the NO oxidation with O2, and the C2H2 consumption under the conditions in the presence or absence of NO.     

Modeling the oxidative coupling of methane： Heterogeneous chemistry coupled with 3D flow field simulation

The oxidative coupling of methane (OCM) over titanate perovskite catalyst has been developed by three-dimensional numerical simulations of flow field coupled with heat transfer as well as heterogeneous kinetic model. The reaction was assumed to take place both in the gas phase and on the catalytic surface. Kinetic rate constants were experimentally obtained using a ten step kinetic model. The simulation results agree quite well with the data of OCM experiments, which were used to investigate the effect of temperature on the selectivity and conversion obtained in the methane oxidative coupling process. The conversion of methane linearly increased with temperature and the selectivity of C2 was practically constant in the temperature range of 973–1073 K. The study shows that CFD tools make it possible to implement the heterogeneous kinetic model even for high exothermic reaction such as OCM.     

Catalytic Hydrogenation of Nitrobenzene to Aniline by Ag/γ-Fe_2O_3

The Ag/γ-Fe_2O_3 nanocomposite was synthesized by solvothermal reduction method via using ferric nitrate and silver nitrate as raw materials, and ethylene glycol as the reducing agent. The composite was characterized by X-ray powder diffraction, scanning electron microscope, transmission electron microscope, and energy dispersive X-ray. The prepared Ag/γ-Fe_2O_3 was used for the catalytic hydrogenation of nitrobenzene to aniline by hydrazine hydrate. The factors such as the silver content in the catalyst, reaction time, reaction temperature and the regeneration of catalyst were investigated. The results showed that the yield of aniline reached 100% by utilizing the 1%wt(nitrobenzene) Ag/γ-Fe_2O_3 for the catalytic hydrogenation of nitrobenzene for 3 h to obtain aniline at 78 ℃, hydrazine hydrate as the hydrogen source, while the silver content in the catalyst was 3%mol.     

催化量OP乳化剂促进THF-FER沸石晶化作用的研究

以四氢呋喃(THF)为模板剂, 在添加催化剂量OP乳化剂(C₈H₁₇C₆H₅O(CH₂CH₂O)₁₀OH, 分子量662)的THF-Na₂O-SiO₂-Al₂O₃-H₂O反应物体系中研究纯相FER沸石的结晶, 并通过粉末X射线衍射(XRD), 扫描电子显微镜(SEM), ¹³C交叉极化(CP)及²⁷Al魔角旋转核磁共振谱(MAS NMR), X射线荧光散射光谱(XRF), 氮吸附等手段进行表征. 体系中催化剂量OP乳化剂对THF-FER沸石结晶过程具有促进作用, 可明显降低结晶温度, 缩短晶化时间, 有效抑制杂晶相MOR沸石的共生.     

Dichiral [4.4.3.01,5]tridecane copper(II) cluster derived from a tripodal ligand having unsymmetrical podands and the linker: Synthesis,structure, surface grafting and catalytic aspects

Pseudo‐atranes have a significant role in catalysis; however, obtaining chiral pseudo‐atranes for covalent functionalization of heterogeneous catalytic surfaces is very challenging. Herein, synthesis of a chiral tripodal amine [N{CH (CH₂Ph)CH₂OH}{CH₂(4? Br? C₆H₃OH)}{CH₂(2? CHO? 4? Me? C₆H₂OH)}] ( 1 ) and a dichiral [4.4.3.0^1,5]tridecane copper(II) cluster, that is, (Cu[N{CH (CH₂Ph)CH₂OH}{CH₂(4? Br? C₆H₃O)}{CH₂(2? CHO? 4? Me? C₆H₂O)}])₂ ( 2 ) is described. The compounds are characterized by elemental analyses, Fourier transform infrared (FT‐IR) spectroscopy, mass spectrometry and single‐crystal X‐ray crystallography (for 2 ). The compound 2 is the first example of chiral pseudo‐copper(II)atrane in which three unsymmetrical arms (two phenolic and a chiral ethanolic arm) are fused via Cu? N transannular bond. The free ? CHO group present in one of the tricyclic arms of the 2 is tested as a linker to load it on 3‐aminopropyltriethoxysilane‐functionalized magnetic nanosilica for catalytic applications. The loading of 2 on magnetic nanosilica through ? CHO was confirmed by FT‐IR spectroscopy, and the 2 ‐loaded magnetic nanosilica ( Fe ₃ O ₄ @SiO ₂ /2 ) was characterized by powder X‐ray diffraction, vibrating sample magnetometry, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and elemental mapping. The Fe ₃ O ₄ @SiO ₂ /2 was found highly efficient, retrievable, eco‐friendly and green catalyst for obtaining β‐amino alcohols in excellent yields in an aqueous medium. Overall, present work is the first report on synthetic, structural and catalytic aspects of dichiral cluster of copper(II)atrane possessing unsymmetrical tricyclic arms.     

Gamma‐Ray Irradiation to Accelerate Crystallization of Mesoporous Zeolites

Gamma‐ray (γ‐ray) irradiation was introduced into zeolite synthesis. The crystallization process of zeolite NaA, NaY, Silicalite‐1, and ZSM‐5 were greatly accelerated. The crystallization time of NaA zeolite was significantly decreased to 18 h under γ‐ray irradiation at 20 °C, while more than 102 h was needed for the conventional process. Unexpectedly, more mesopores were created during this process, and thus the adsorption capacity of CO₂ increased by 6‐fold compared to the NaA prepared without γ‐ray irradiation. Solid experimental evidence and density function theory (DFT) calculations demonstrated that hydroxyl free radicals (OH*) generated by γ‐rays accelerated the crystallization of zeolite NaA. Besides NaA, mesoporous ZSM‐5 with MFI topology was also successfully synthesized under γ‐ray irradiation, which possessed excellent catalytic performance for methanol conversion, suggesting the universality of this new synthetic strategy for various zeolites.     

Reversible Stannylenoid Formation from the Corresponding Stannylene and Cesium Fluoride

A fluorostannylenoid ( Cs⁺[R₂SnF]^? ( 9 ), R₂=(TMS)₂CCH₂CH₂C(TMS)₂) was prepared by reacting a stable dialkylstannylene (R₂Sn ( 8 ), R₂=(TMS)₂CCH₂CH₂C(TMS)₂) with cesium fluoride at room temperature in THF. While 9 is stable in THF and DME, removal of the solvent leads to the regeneration of stannylene 8 . No reaction occurred when 8 was treated with CsF in a hydrocarbon solvent. Addition of dibenzo‐21‐crown‐7 ether to the THF solution of stannylenoid 9 followed by usual workup affords the corresponding crystalline stannylenoid crown ether complex, the X‐ray structural analysis of which revealed a fluorine‐bridged contact ion‐pair structure. The reaction of 9 with excess phenylacetylene gives the corresponding di(phenylethynyl)stannane.     

Tetranuclear Manganese Complex Incorporating 2‐Pyridyloximate Ligand: Synthesis,Crystal Structure and Magnetic Property

A tetranuclear manganese complex of the composition {Mn₄[(Py)C(Ph)NO]₄(CH₃CH₂OH)₃(CH₃CH₂O)Cl₃}·2H₂O ( 1 ) was synthesized by solvothermal reaction, and characterized by X‐ray single crystal diffraction, IR spectroscopy, and elemental analysis. X‐ray analysis revealed that complex 1 contains a [Mn₄(NO)₄]⁴⁺ core with three Mn^II atoms displaying distorted octahedral arrangements and one Mn^II ion exhibiting a trigonal bipyramidal arrangement. Low‐temperature magnetic susceptibility measurement for the solid sample of 1 revealed antiferromagnetic Mn^II ··· Mn^II interactions.     

Encapsulation and Dynamic Behavior of Methanol and Formaldehyde inside Open‐Cage C60 Derivatives

Methanol (CH₃OH) and formaldehyde (H₂CO) molecules were inserted into an open‐cage C₆₀ derivative with a large opening, under high‐pressure and high‐temperature conditions in solution. Isolation of their molecular complexes in pure form was achieved by the use of recycling HPLC with Buckyprep columns. ¹H NMR spectroscopy, single‐crystal X‐ray diffraction studies, and DFT calculations revealed the orientation of the encapsulated CH₃OH and H₂CO, both in solution and in the solid state, and the results show that the CH₃ group of the CH₃OH and the carbonyl group of the H₂CO point to the bottom of the cages. Furthermore, the dynamic behavior of the CH₃OH and H₂CO were studied at the molecular level.     

Containing‐PMBP N2O2‐donors transition metal(II) complexes: Synthesis,crystal structure,Hirshfeld surface analyses and fluorescence properties

Three newly designed containing‐PMBP N₂O₂‐donors complexes, [Co(L¹)(CH₃OH)₂] ( 1 ), [{Zn(L²)(CH₃OH)(H₂O)}₃] ( 2 ) and [Cu₄(L²)₄]?2CHCl₃ ( 3 ), have been synthesized and structurally characterized using elemental analyses, infrared and UV–visible spectroscopies and single‐crystal X‐ray diffraction. X‐ray crystal structure determinations revealed that 1 consists of one Co(II) atom, one completely deprotonated (L¹)^2? unit and two coordinated methanol molecules. Complex 2 consists of three Zn(II) atoms, three completely deprotonated (L²)^2? units, three coordinated methanol molecules and three coordinated water molecules. However, 3 includes four Cu(II) atoms, four completely deprotonated (L²)^2? units and two crystallization chloroform molecules. The Co(II) and Zn(II) atoms in the structures of 1 and 2 adopt slightly distorted octahedral geometries. While, Cu(II) atoms in 3 can be best described as adopting slightly distorted square planar geometries. Complex 2 is a novel structure, and the ratio of H₂L² to Zn(II) atom is 3:3. In addition, two‐, three‐ and three‐dimensional supramolecular structures were constructed for 1 , 2 and 3 . Most importantly, Hirshfeld surface analysis of 1 , 2 and 3 was conducted and fluorescence properties were investigated.     

[{(CH3)3Si}3C–Li–C{Si(CH3)3}3][Li · 3(OC4H8)] und {(CH3)3Si}3C–Li · O=C(Si(CH3)3)2, zwei neue Addukte des Lithium‐trisylmethanids

[{(CH₃)₃Si}₃C–Li–C{Si(CH₃)₃}₃][Li · 3(OC₄H₈)] and {(CH₃)₃Si}₃C–Li · O=C(Si(CH₃)₃)₂, two New Adducts of Lithium Trisylmethanide Sublimation of (Tsi–Li) · 2 THF (Tsi = –C(Si(CH₃)₃)₃) at 180 °C and 10^–4 hPa gives (Tsi–Li) · 1.5 THF in very low yield. The X‐ray structure determination shows an almost linear [Tsi–Li–Tsi]^– anion connected by short agostic Li…C contacts with the threefold THF‐coordinated Li‐cation. Base‐free Tsi–Li, solved in toluene is decomposed by oxygen, forming the strawberry‐colored ketone O=C(SiMe₃)₂, which forms an 1 : 1 adduct with undecomposed Tsi–Li. The X‐ray structure elucidation of this compound is also discussed.     

Organometallic Compounds of the Lanthanides. 157 [1] The Molecular Structure of Tris(trimethylsilylmethyl)samarium, ‐erbium, ‐ytterbium,and ‐lutetium

SmCl₃ reacts with Me₃SiCH₂Li in THF yielding Sm(CH₂SiMe₃)₃(THF)₃ ( 1 ). The single crystal X‐ray structural analyses of 1 , Er(CH₂SiMe₃)₃(THF)₂ ( 2 ), Yb(CH₂SiMe₃)₃(THF)₂ ( 3 ), and Lu(CH₂SiMe₃)₃(THF)₂ ( 4 ) show the Sm atom in a fac‐octahedral coordination and the heavier lanthanides Er, Yb, and Lu trigonal bipyramidally coordinated with the three alkyl ligands in equatorial and two THF molecules in axial positions.     

IDM‐1: A Zeolite with Intersecting Medium and Extra‐Large Pores Built as an Expansion of Zeolite MFI

IDM‐1 is a new silica zeolite with an ordered and well‐defined framework constructed by alternating pentasil layers and interrupted layers, giving rise to an intersecting system of straight medium pores and undulating extra‐large lobed pores. This unique structure was solved by rotation electron diffraction and refined against synchrotron powder X‐ray diffraction data. Despite the presence of both Si(OSi)₃(OH) and Si(OSi)₂(OH)₂ sites, this new zeolite presents high thermal stability, withstanding calcination even to 1000 °C. The location of defects at specific sites of the structure results in alternating hydrophobic SiO₂ and hydrophilic SiO_(2?x)(OH)_2x intracrystalline regions. This peculiar combination of intersecting medium and extra‐large pores and alternating regions of different chemical character may provide this zeolite with unique catalytic properties.