新型高效偏振光分束器的设计

研究及分析了光波在分束结构中的传播行为和特性,发现当增大波导邻近两侧空气孔半径时,能形成完全光子禁带范围内某一频率光波单一偏振态的传播,基于此原理提出了一种全新结构的偏振光分束器,计算与模拟结构表明,该结构可以实现TE模与TM模高效大角度分离. 器件尺寸不超过17.6 μm×9.8 μm,在集成光回路中无疑有着很大的应用潜力. 关键词： 光子晶体 偏振光分束器 时域有限差分法 平面波展开法     

光子晶体定向耦合三波长功分器

以二维三角晶格光子晶体为研究对象,在该光子晶体中引入两行以一行耦合介质柱为间距的平行单模线缺陷波导.通过分析和研究光子晶体波导耦合结构的耦合和解耦合特性,发现在不同频率下耦合波导的耦合长度不同.利用平面波展开法和定向耦合原理计算了在不同入射光频率下,缺陷波导间耦合波导的耦合长度,设计了一种新型超微光子晶体波导耦合型三波长功分器,实现了归一化频率分别为0.369、0.394、0.435的光波的分束效果.采用时域有限差分法验证了该功分器具有很好的功率分配效果.本文结果有助于光子晶体新型滤波器、定向耦合器、波分复用器、偏振光分束器以及光开关等光子器件的研究.     

二维光子晶体偏振滤波分束器的设计与优化

设计了一种基于二维光子晶体的偏振滤波分束器.利用平面波展开法计算光子晶体带隙,确定入射光波1 550nm下获得单偏振光的微结构参数,利用时域有限差分法对90°弯折缓冲层和分支冲击壁进行优化.分束器实质为在二维光子晶体阵列中引入缺陷而构成的波导,利用光子带隙效应和线缺陷90°偏转将入射光中的TM偏振分量(或TE偏振)完全过滤,得到单偏振光,最后通过Y型分支实现1∶1的单偏振光分光输出.仿真结果表明总输出/输入功率比达到68%.     

高透射率慢光速的光子晶体耦合腔波导的研究

将二维三角晶格光子晶体波导和微腔结构结合,优化设计了一种二维三角晶格光子晶体共振耦合腔波导,运用时域有限差分法(FDTD)模拟共振耦合腔波导TE偏振光的透射谱,通过透射谱得到传输光的透射率和群速度。结果表明,合适参数的二维三角晶格共振耦合腔波导在波长1.551μm处的群速度为c/130、透射率为20.1%,在波长1.502μm处的群速度为c/50、透射率为29.2%。运用平面波展开法(PWE)计算的该波导的能带结构对慢光特性进行了分析。这种慢光特性的光子晶体波导将在光存储、光延迟及光子集成等方面有潜在的应用价值。     

二维光子晶体线缺陷结构的光谱辐射特性

光子晶体的禁带特性是该新兴材料的最根本特征。本文运用平面波展开法(PWE)计算了一种正方晶格Si光子晶体材料的禁带特性,并基于该材料设计出一种红外波段的线缺陷光子晶体波导结构。运用时域有限差分法(FDTD)研究了线缺陷二维光子晶体波导宽度对通频带、电场强度及透射能量的影响,研究结果为二维光子晶体波导器件的开发和利用提供了理论支撑。     

光控液晶光子晶体微腔全光开关

设计了一种缺陷模迁移光子晶体微腔全光开关. 两条二维三角晶格空气孔光子晶体波导由一个光子晶体微腔连接, 在微腔的点缺陷中填充掺有少量偶氮聚合物的苯乙炔类液晶. 通过调节控制光的偏振态, 使偶氮聚合物发生顺-反异构化反应, 带动液晶分子重新取向, 从而改变光子晶体微腔的谐振波长, 进而实现光的通过与截止. 运用时域有限差分法和平面波展开法分析 了二维光控液晶光子晶体微腔全光开关的光学特性. 数值计算结果表明: 对于1.55 μ通信波段通过外界偏振光控制所填充的向列相液晶 的折射率可以实现对光波的导通与截止. 分析结果显示, 此开关具有阈值低, 消光比较大, 体积小等优点. 关键词： 二维光子晶体微腔 波导 时域有限差分(FDTD) 液晶     

耦合腔光子晶体慢光波导结构

在单线缺陷结构中引入两个附加的相邻介质柱,构成一种新型的光子晶体耦合腔波导结构.通过平面波展开法对波导结构的的慢光特性进行了仿真分析,研究了平移线缺陷上下两侧介质柱,以及改变腔体的长度对器件色散特性和群速度的影响.结果表明:与平移缺陷上下两侧介质柱相比,通过改变腔体的长度,不仅可将光群速度低到0.03c(c为真空下的光速),而且器件的有效波长范围接近20nm.利用时域有限差分法得到波导结构的传输场分布图,研究波长的选取对入射激励光在光子晶体耦合腔波导中传输场的影响,发现结构参量优化后的光子晶体耦合腔波导仍然具有良好的传输特性.     

基于表面波的新型光子晶体分束器

通过激发光子晶体-光子晶体表面波的方法,设计出了一种由表面修饰光子晶体组成的新型复合结构。利用平面波展开法结合超原胞技术对该结构的耦合表面波色散关系进行了研究,在此基础上利用时域有限差分法对光束在该结构中的传输特性进行了数值模拟,并分析了其物理机制。研究结果表明,所提出的新型结构,对一定频率范围内的传输光,能够实现输出光的分束,此特征可以用来制作光束分束器。     

光子晶体表面光波导的特性研究

采用平面波展开法和时域有限差分法,研究了光子晶体表面光波导的色散及光传输特性。研究结果表明,表面模的出现及其色散特性与表面介质柱的半径相关,色散曲线的斜率保持单调变化,并在最低或最高频率附近展现低群速度频率区。由于光子带隙和全内反射的共同影响,光场将沿晶体表面高效率地传输。研究结果为探索在光子晶体外部控制光传输具有重要的理论意义。     

高效光子晶体太赫兹滤波器的设计

提出了一种新型光子晶体太赫兹(THz)滤波器,该滤波器包括利用线缺陷实现的波导部分和利用微腔实现的频率选择部分.应用平面波法(PWM)分析其带隙结构,然后应用时域有限差分法(FDTD),研究THz波在此滤波器中的传输特性,结果表明,通过改变点缺陷的结构和增大某些介质柱的半径,可以使该滤波器实现高耦合效率的单信道单频率滤波. 关键词： 光子晶体 THz波 平面波法 时域有限差分法     

基于自准直效应的光子晶体异质结偏振分束器

基于光子晶体的自准直效应和禁带特性,提出了一种具有非正交异质结结构的光子晶体偏振分束器.无需引入缺陷或波导,可使光波在该结构中准直无发散地传输并实现分束功能,对制造工艺的要求大大降低.利用Rsoft软件,结合平面波展开法和二维时域有限差分法,对提出的偏振分束器进行了仿真研究.结果表明,该偏振分束器在一个较大的频率范围f=0.275—0.285(a/λ)内可实现横电(TE)和横磁(TM)模的大角度偏振分离,TE和TM模的透过率均在88%以上,偏振消光比分别大于26.57 dB和17.50 dB.该结构可应用到太赫兹波段的传输系统中,a=26μm,尺寸大小为572μm×546μm,在91—95μm波长范围内可实现TE和TM模的分离.利用该结构可设计用于光通信系统(n=3.48)的偏振分束器,a=426.25 nm,结构仅为9.38μm×8.95μm.本方案结构简单,易于集成,有望在集成光路的发展中发挥重要作用.     

Photonic Crystal Polarizing and Non-Polarizing Beam Splitters

A polarizing beam splitter （PBS） and a non-polarizing beam splitter （NPBS） based on a photonic crystal （PC） directional coupler are demonstrated. The photonic crystal directional coupler consists of a hexagonal lattice of dielectric pillars in air and has a complete photonic band gap. The photonic band structure and the band gap map are calculated using the plane wave expansion （PWE） method. The splitting properties of the splitter are investigated numerically using the finite difference time domain （FDTD） method.     

Optical surface modes of photonic crystals for dual-polarization waveguide

In this study, the design of a polarization-independent (dual-polarization) waveguide is presented by utilizing surface modes of photonic crystals. The waveguide structure operates in a frequency interval that is commonly shared by both transverse-electric (TE) and transverse-magnetic (TM) polarizations. The numerical calculations based on plane wave expansion and finite-difference time-domain methods are carried out to design and demonstrate a surface mode waveguide that provides confinement and guiding for both TE and TM modes. Once the relevant modes are properly excited, the high transmission efficiency of the photonic crystal surface waveguide is ensured. The demand to have polarization-insensitive devices makes our proposed design an important component for the photonic integrated circuit applications. Finally, we also propose a broadband surface mode photonic crystal waveguide with a bandwidth value of 28% for only TE polarization.     

Polarization beam splitter based on photonic crystal self-collimation Mach-Zehnder interferometer

A polarization beam splitter based on a self-collimation Mach-Zehnder interferometer (SMZI) in a hole-type silicon photonic crystal was proposed and numerically demonstrated. Utilizing polarization dependence of the transmission spectra of the SMZI and polarization peak matching (PPM) method, the SMZI can work as a polarization beam splitter (PBS) by selecting appropriate path length difference in the structure. Because of its intrinsic operating principle, the PBS possesses high polarization extinction ratios (PERs). As its dimensions are only several operating wavelengths, the PBS may have practical applications in photonic integrated circuits.     

Design of tunable surface mode waveguide based on photonic crystal composite structure using organic liquid

With the method of replacing the surface layer of photonic crystal with tubes, a novel photonic crystal composite structure used as a tunable surface mode waveguide is designed. The tubes support tunable surface states. The tunable propagation capabilities of the structure are investigated by using the finite-difference time-domain. Simulation results show that the beam transmission distributions of the composite structure are sensitive to the frequency range of incident light and the surface morphology which can be modified by filling the tubes with different organic liquids. By adjusting the filler in tubes, the T-shaped, Y-shaped, and L-shaped propagations can be realized. The property can be applied to the tunable surface mode waveguide. Compared with a traditional single function photonic crystal waveguide, our designed structure not only has a small size, but also is a tunable device.     

Dual-beam-reflection phenomenon due to leaky modes in a photonic band gap

We show a dual-beam-reflection phenomenon for a Gaussian beam illuminating a hybrid structure of a dielectric waveguide and photonic crystal (WG-PC) inside the photonic band gap by numerical simulations. One reflection beam has a giant negative lateral shift, but the other has a positive lateral shift. The finite-difference time-domain (FDTD) simulations show that this phenomenon has a time delay effect and comes from the leaky surface mode of the hybrid structure. Field profile of the leaky mode demonstrates a strong localized stationary field in the higher dielectric medium. Furthermore, the maximum lateral shift is almost two times of the waist of the incident beam.     

Ring resonator of surface modes based on photonic crystals

We design a compact ring resonator of surface modes based on photonic crystals (PCs). The structure is formed by sandwiching a surface mode ring waveguide (SMRW) into two parallel surface mode waveguide (SMW) based on two dimensional (2D) PCs. The SMRW is created on the surface of a circular photonic crystal (CPC) structure, where the wave propagates with high transmission efficiency. As a fundamental mode is introduced in the input SMW, at certain frequencies, the SMRW modes are enhanced because of resonance and the light-waves are coupled to the output SMW. It is demonstrated by the simulation results that the surface mode ring resonator has a low radiation loss with a very small size because of the good wave-guiding of surface mode based on PCs, and can be used in the future wavelength division multiplex (WDM) optics communication systems.     

Theoretical investigation of band-gap and mode characteristics of anti-resonance guiding photonic crystal fibres

With the full-vector plane-wave method (FVPWM) and the full-vector beam propagation method (FVBPM),the dependences of the band-gap and mode characteristics on material index and cladding structure parameter in antiresonance guiding photonic crystal fibres (ARGPCFs) are sufficiently analysed.An ARGPCF operating in the nearinfrared wavelength is shown.The influences of the high index cylinders,glass interstitial apexes and silica structure on the characteristics of band-gaps and modes are deeply investigated.The equivalent planar waveguide theory is used for analysing such an ARGPCF filled by the isotropic materials,and the resonance and the anti-resonance characteristics can be well predicted.     

光子晶体自准直光束偏振分束器

结合能带图和等频图分析,基于光子晶体自准直效应和光子带隙,设计了一种紧凑、高效的偏振分束器.时域有限差分法(FDTD)模拟表明,该设计可以在一个较大的频率范围f=0.268—0.278(c/a) 内实现TE模和TM模的高效(85%)、大角度(90°)分离.在光通讯波长λ=1.55 μm,该设计尺寸仅为9 μm×9 μm.这些特性使其在光通讯领域中具有重要的应用前景. 关键词： 光子晶体 偏振分束器 自准直     

Enhanced third harmonic reflection and diffraction in Silicon on Insulator photonic waveguides

Enhanced third harmonic (TH) generation from Silicon-On-Insulator (SOI) planar waveguides as well as SOI photonic crystal (PhC) slabs is studied in different angular configurations, both in the visible and infrared energy ranges. In the SOI planar waveguide, the multilayer structure causes the optical properties such as TH reflection to be different from those of bulk silicon samples. This behavior is well reproduced by calculations of TH reflectance.Measurements of third-harmonic reflection and diffraction from one-dimensional PhC slabs etched in the SOI waveguide are also reported. The angular positions of TH peaks at various diffraction orders agree well with those calculated from a nonlinear grating equation. Both reflection and diffraction processes contribute to enhanced TH generation efficiency in the PhC slabs.TH reflectance measurements performed on PhC slabs in the near infrared show a resonant interaction between the incident beam and the photonic structure, dependent on the angle of incidence. This leads to a nonlinear conversion efficiency which is strongly enhanced with respect to that of the SOI waveguide, due to the excitation of strong local fields associated with the presence of photonic modes in the PhC slab.