一种新型的光子晶体偏振光分束器的设计

基于光波在直波导和复合结构光子晶体中的传播特性,结合平面波展开法和时域有限差分法,提出并讨论了一种新型的超紧凑的光子晶体偏振光分束器. 它是由输入波导,分束结构和输出波导三部分组成. 对这种结构的三角晶格光子晶体光分束器的数值计算与模拟结果表明,该结构可以实现TE模和TM模的高效大角度分离,并且在通信波段设计尺寸小,这些特性使其在未来的集成光回路中有着重要的应用前景. 关键词： 偏振光分束器 能带结构 平面波展开法 时域有限差分法     

基于氟掺杂双芯光子晶体光纤偏振光分束器的设计及研究

在光子晶体光纤二氧化硅材料中掺入氟元素、在光纤中引入七个椭圆空气孔以及三角形和矩形周期性空气圆孔,设计了一种氟掺杂双芯光子晶体光纤偏振光分束器.对该分束器结构参量进行优化,对分束器分离两正交偏振光的性能进行分析.结果表明:在优化结构尺寸下,当光纤长度为102.717μm的超短长度时,在1.55μm波长处具有超强的分离两束正交偏振光的能力,消光比可以达到126.442dB,具有60nm的有效带宽.此偏振光分束器在大容量光通信系统中具有重要的应用价值.     

基于三角晶格光子晶体多模波导1×2分束器的优化设计

依据自映像原理,设计了一种基于三角晶格光子晶体多模波导的1×2分束器.采用时域有限差分法模拟了光波在分束器中的传播行为,并计算了分束器的传输效率.结果表明,仅仅通过改变多模波导与输出波导联结处的介质柱的位置对结构进行优化,便可大大提高分束器在工作点频率处的传输效率和带宽,其多模耦合区的长度可低至3.1 μm.因而本文所设计的分束器具有更小的器件尺寸和更高的传输效率,易于大规模集成的实现,在未来的集成光路中具有广泛的应用价值.     

二维光子晶体偏振滤波分束器的设计与优化

设计了一种基于二维光子晶体的偏振滤波分束器.利用平面波展开法计算光子晶体带隙,确定入射光波1 550nm下获得单偏振光的微结构参数,利用时域有限差分法对90°弯折缓冲层和分支冲击壁进行优化.分束器实质为在二维光子晶体阵列中引入缺陷而构成的波导,利用光子带隙效应和线缺陷90°偏转将入射光中的TM偏振分量(或TE偏振)完全过滤,得到单偏振光,最后通过Y型分支实现1∶1的单偏振光分光输出.仿真结果表明总输出/输入功率比达到68%.     

基于自准直效应的光子晶体异质结偏振分束器

基于光子晶体的自准直效应和禁带特性,提出了一种具有非正交异质结结构的光子晶体偏振分束器.无需引入缺陷或波导,可使光波在该结构中准直无发散地传输并实现分束功能,对制造工艺的要求大大降低.利用Rsoft软件,结合平面波展开法和二维时域有限差分法,对提出的偏振分束器进行了仿真研究.结果表明,该偏振分束器在一个较大的频率范围f=0.275—0.285(a/λ)内可实现横电(TE)和横磁(TM)模的大角度偏振分离,TE和TM模的透过率均在88%以上,偏振消光比分别大于26.57 dB和17.50 dB.该结构可应用到太赫兹波段的传输系统中,a=26μm,尺寸大小为572μm×546μm,在91—95μm波长范围内可实现TE和TM模的分离.利用该结构可设计用于光通信系统(n=3.48)的偏振分束器,a=426.25 nm,结构仅为9.38μm×8.95μm.本方案结构简单,易于集成,有望在集成光路的发展中发挥重要作用.     

一种新型光子晶体波导定向耦合型超微偏振光分束器

将两个二维空气孔光子晶体波导平行放置,两波导之间由三排空气孔相隔,构成一个定向耦合器.数值分析了TE(磁场平行于空气孔)和TM(电场平行于空气孔)偏振态光波在该定向耦合器中的传播行为.结果表明,减小耦合区两波导间的一排介质柱的半径,TE模的耦合长度减小,而TM模的耦合长度不变.基于此结构,设计了超微偏振光分束器,整个器件的尺寸为10.1μm,与已报道的24.2μm的结果相比,该器件具有更小的器件尺寸和更高的输出效率.     

光子晶体自准直光束偏振分束器

结合能带图和等频图分析,基于光子晶体自准直效应和光子带隙,设计了一种紧凑、高效的偏振分束器.时域有限差分法(FDTD)模拟表明,该设计可以在一个较大的频率范围f=0.268—0.278(c/a) 内实现TE模和TM模的高效(85%)、大角度(90°)分离.在光通讯波长λ=1.55 μm,该设计尺寸仅为9 μm×9 μm.这些特性使其在光通讯领域中具有重要的应用前景. 关键词： 光子晶体 偏振分束器 自准直     

基于金线填充的双芯光子晶体光纤偏振分束器

提出了一种基于金线填充的双芯光子晶体光纤超短偏振分束器,并进行了有限元分析.金线表面激发的表面等离子激元与双芯光子晶体光纤纤芯模之间的强烈耦合,导致更短的偏振分束器长度和更大的工作带宽.与同类的偏振分束器相比,所提出的偏振分柬器能同时实现较短的长度和较高的消光比.数值结果表明,长度为0.263 mm的偏振分束器,在波长1.55 μm处消光比达-70 dB,-20 dB消光比带宽为124 nm.     

全固三芯光子晶体光纤偏振分束器

设计分析了一种基于碲酸盐玻璃的全固态三芯光子晶体光纤偏振分束器.利用三芯光纤中存在的谐振耦合现象,调整光纤结构参量,使某一偏振光无限接近谐振耦合条件产生强耦合,而另一偏振光因远离谐振耦合而耦合程度较弱,实现不同偏振光的分离.该偏振分束器长度短、超宽带、消光比高.在波长1 550nm处,偏振分束器长度仅为1.14mm,消光比高达-101.27dB;消光比小于-20dB的带宽达到100nm;消光比小于-10dB的带宽覆盖了E+S+C+L+U波段,高达350nm.此全固光子晶体光纤偏振分束器不仅性能优越,结构简单,且全固态的设计结构可有效避免光纤拉制过程中的空气孔坍塌,为设计更优性能的偏振分束器提供了思路.     

基于碲酸盐的新型单芯光子晶体光纤偏振分束器

提出了一种基于ZnTe碲酸盐玻璃的单芯光子晶体光纤偏振分束器.在外侧包层纤芯对称位置引入缺陷孔,使缺陷模和纤芯基模发生耦合以实现光束分离.采用全矢量有限元法对所提出的单芯光子晶体光纤偏振分束器的特性进行研究,结果表明:该分束器可以实现1.3μm和1.55μm波长光的分离,并使光束沿X和Y偏振方向同时传播;当光纤长度为15mm时,1.3μm和1.55μm处的串扰值分别低至-45.1dB和-40.2dB,小于-20dB的带宽分别为44.2nm和67.1nm;在传输波长1.3μm和1.55μm处的损耗值为0.063dB和0.048dB;偏振分束器在具有低串扰值的同时,具有较低的限制损耗.     

High Polarization Single Mode Photonic Crystal Microlaser

Generally, dipole mode is a doubly degenerate mode. Theoretical calculations have indicated that the single dipole mode of two-dimensional photonic crystal single point defect cavity shows high polarization property. We present a structure with elongated lattice, which only supports a single y-dipole mode. With this structure we can eliminate the degeneracy, control the lasing action of the cavity and demonstrate the high polarization property of the single dipole mode. In our experiment, the polarization extinction ratio of the y-dipole mode is as high as 51：1.     

Multilayer polymeric mode and polarization filters for integrated optics

We demonstrate theoretically as well as experimentally that a four-layer polymeric waveguide structure can be used to produce a mode and a polarization filter. Various optical properties such as refractive index, birefringence and propagation constant of polycarbonate, polystyrene and a commercially available photoresist (from Shipley) are presented. The thin film structures consisting of glass/polycarbonate/polystyrene/air are used for demonstrating polarization filter action and glass/photoresist/polystyrene/air structure for mode filter. Expressions for the electric field intensity spatial distribution for the structure are used to calculate the intensity profiles to support the observed behavior. The experimental values were in good agreement with the one obtained theoretically.     

Finite size effects on structure and magnetism in mass-selected CoPt nanoparticles

In this paper, the one-way absorption property in one-dimensional dielectric/metal photonic crystal structure with a dielectric defect layer is studied. The effects of incident angle and state of polarization on one-way absorption behaviour of the anti-resonant (AR) mode are investigated. The normally incident wave from left to right propagation is totally allowed to penetrate to the structure but right to left propagation totally reflected at the same wavelength. It is found that, with increasing of the incident angle, the AR mode shifts to the lower wavelengths and its intensity decreases. Simultaneously, another AR mode with reversed one-way property appears at higher wavelength. The one-way behaviour on absorption is observed at the both states of polarizations but is localized on different wavelengths. Those effects, are suggesting that the proposed structure can be used as a direction sense polarization splitter or reflector/antireflector device.     

EMCCD集成偏振-微光一体化成像技术研究

单一探测器实现多维度信息获取是光电探测未来的发展方向。针对目标探测中能量和偏振信息不能兼顾的问题，提出了一种同时具有偏振-微光功能的像元阵列结构。通过引入白光通道和精简偏振通道，可在EMCCD器件上实现偏振和微光探测的一体化集成。实验结果表明，在微光条件下，探测器高灵敏性能被保持，低照度下的成像质量几乎不衰减；偏振模式下，白光通道和两个偏振角度使探测器能够获得足够的偏振信息，实现对目标的偏振探测。该方法实现了高灵敏度成像探测和偏振信息探测的同步获取，是一种通过算法处理就能够实现探测模式可重构的新方法。     

Complete Polarization Conversion Characteristics of Dielectric Grating Composed of Left-Handed Materials

The TE/TM polarization conversion characteristics of dielectric grating composed of left-handed materials for the case of plane wave oblique incidence are carefully investigated by a method which combines the multimode network theory with the rigorous mode matching method. It is indicated that complete polarization conversion between TE and TM modes can be realized using left-handed gratings. This can hardly achieve in the conventional right-handed gratings. Comparisons of polarization conversion properties between right-handed gratings and left-handed gratings are given with physical explanations. This unique merit of left-handed periodic structure is of important significance for accurate design of new millimeter wave TE/TM polarization converters.     

Near-infrared tunable narrow filter properties in a 1D photonic crystal containing semiconductor metamaterial photonic quantum-well defect

The near-infrared (NIR) narrow filter properties in the transmission spectra of a one-dimensional photonic crystal doped with semiconductor metamaterial photonic quantum-well defect (PQW) were theoretically studied. The behavior of the defect mode as a function of the stack number of the PQW defect structure, the filling factor of semiconductor metamaterial layer, the polarization and the angle of incidence were investigated for Al-doped ZnO (AZO) and ZnO as the semiconductor metamaterial layer. It is found that the frequency of the defect mode can be tuned by variation of the period of the defect structure, polarization, incidence angle, and the filling factor of the semiconductor metamaterial layer. It is also shown that the number of the defect mode is independent of the period of the PQW defect structure and is in sharp contrast with the case where a common dielectric or metamaterial defect are used. The results also show that for both polarizations the defect mode is red-shifted as the number of the defect period and filling factor increase. An opposite trend is observed as the angle of incidence increases. The proposed structure could provide useful information for designing new types of tuneable narrowband filters at NIR region.     

一种新型高双折射光子晶体光纤

提出了一种新的高双折射光子晶体光纤结构.应用全矢量频域有限差分方法所做的数值分析表明：该结构光纤基模的两个正交偏振态不再简并，其模式呈现很强的线偏振特性,并且模式双折射与结构参数设置有密切关系.通过选择合适的结构参数，可以使之达到10^-2量级，比传统的D型和熊猫型保偏光纤高出2个数量级.合理设计光纤包层的几何结构，可以取得理想的色散效果.这种结构的光子晶体光纤可用于制作具有适当色散特性或偏振特性的保偏光纤及相关光纤器件. 关键词： 光子晶体光纤 模式双折射 偏振特性 频域有限差分法     

基于开口环阵列结构的表面晶格共振产生及二次谐波增强

理论研究了二维周期排列的金开口环谐振器的磁共振模式与周期阵列的衍射模式发生强耦合所需满足的条件及其对二次谐波产生效率的影响.通过控制阵列结构在x和y方向的周期大小,使得衍射模式只在其中一个方向产生,当衍射模式的电场方向与入射光电场偏振方向一致时,衍射模式才会与开口环谐振器的磁共振模式发生强耦合作用,产生表面晶格共振进而实现近场场增强.在此基础上,进一步计算了金开口环谐振器阵列的二次谐波产生效率,随着阵列周期逐渐增大,即开口环谐振器的数密度减小,二次谐波强度呈现先增加后降低的趋势,当开口环谐振器数密度降为原来的1/4左右时,二次谐波强度可以增强2倍以上.本文的研究为金属超表面二次谐波产生效率的提高提供了一种新的可能途径.     

Propagation Characteristics of a Novel NRD Guide with Double-Layer LHM Slab

A new waveguiding structure based on NRD (Nonradiative Dielectric) guide with a double-layer LHM (Left Hand Material) slab is carefully investigated. Rigorous multi-mode network treatment combining with mode matching method is carried out to analyze the propagation characteristics of the structure. Theoretical analysis results reveal that depending on the choice of permittivity and permeability of the two dielectric slabs, the guiding structure is of series distinct and interesting properties, such as anomalous dispersion, opposite polarization modes coupling, and the existence of complex mode. Besides, the new configuration can also be used as a leaky wave antenna working in the dominant or the first higher order mode. All these particular features create various applications in electromagnetic engineering.     

Properties of polarization evolution in spun fibers

We study the properties of polarization evolution in sinusoidally spun fibers. It is found that, similar to linear birefringent fibers, the evolution of the state of polarization exhibits periodicity, which can be measured by distributed measurement, such as those made with a polarization optical time domain reflectometer. The spatial period is linked with the spin parameters and fiber beat length in a simple equation. In combination with a previous finding, it is shown that the spatial period is uniquely related to spun-fiber polarization mode dispersion. This suggests that distributed fiber polarization mode dispersion can be determined throughthe measurement of the spatial period obtained in a distributed measurement.