含有乙醚的无胺无氟反应物体系中高硅丝光沸石的合成

本文研究含有乙醚的Na2O-Al2O3-SiO2-H2O反应物中高硅丝光沸石在413-453K下的水热合成。乙醚的存在能有效促进丝光沸石的结晶过程,且有助于提高产物结晶度和硅铝比。反应物胶体中硅铝比与碱度对产物的生成有关键作用。合成原料使用不同铝源,体系结晶规律相近,但产物的形貌和硅铝比有差异。在优化的反应条件下合成的高硅丝光沸石硅铝比达30左右。低温氮吸附与27Al魔角旋转核磁谱表征证实该沸石骨架结构完美,孔道开放畅通,其水热稳定性优于低硅丝光沸石。     

氟离子对无胺法合成高硅丝光沸石的结构导向作用

 在含氟无胺体系中合成了高硅丝光沸石，研究了合成条件对丝光沸石产物的影响．结果表明，投料n（SiO2）／n（Al2O3）＝20～200时，控制晶化条件可得到高硅丝光沸石纯相．由含氟无胺体系中丝光沸石的热力学稳定相区可见，氟离子的引入对方沸石的生成的相区无影响，ZSM－5和镁碱沸石生成的相区消失，丝光沸石生成的相区扩大，石英生成的相区缩小，且基本上变为两相共存区．合成产物丝光沸石的硅铝比随着氟硅比的升高同步增大，证明氟离子在无胺合成高硅丝光沸石时具有结构导向作用．     

无胺法合成高硅丝光沸石的表征

采用XRD、SEM、FT-IR、MAS NMR等表征手段, 对以氟离子为结构导向剂无胺法合成的高硅丝光沸石进行了表征. 结果表明: 高硅丝光沸石结构属立方晶系, 晶胞参数小于传统低硅丝光沸石, 但b、c值要比相近硅铝比非氟体系合成的丝光沸石样品的大; 样品形貌及粒径与其硅铝比有关, 表明晶化条件对产物形貌及粒径均有影响; 随硅铝比的增大, FT-IR光谱中450、544、1053 cm-1谱带向高频移动, 720 cm-1谱带强度减弱, 表明骨架中铝减少而硅增多; 采用含氟无胺体系合成高硅丝光沸石时基本上不会产生非骨架铝.     

凝胶制备对气相合成MCM-22沸石的影响

以硅酸钠为硅源、硫酸铝为铝源制备硅铝干凝胶，六亚甲基亚胺（HMI）为模板剂，采用气相法合成MCM-22沸石。对硅铝干凝胶进行了29 Si MAS NMR、27 Al MAS NMR、红外以及透射电镜表征，讨论了pH值对硅铝干凝胶及合成MCM 22沸石的影响。结果表明，pH值的改变影响硅铝聚集态、干凝胶的结构及其粒径等物理性质，合成时硅铝干凝胶解聚、气固间传质及固相溶解速度不一致，影响产物MCM-22的结晶度。当制备干凝胶的pH值为8.7～10.7时，得到结晶度高的MCM-22沸石；当pH值增大到11.1时，产物出现杂晶丝光沸石；pH为11.6时只能得到丝光沸石。     

四乙基溴化铵-氟化物复合模板剂合成β沸石(Ⅱ)--β沸石晶化过程研究

采用FT-IR,XRD,SEM,TG,ICP-AES等技术研究了四乙基溴化铵(TEABr)-氟化物复合模板剂体系合成β沸石的晶化过程.发现本体系β沸石的合成遵循液相转变机理,在诱导期向生长期转变的转折点存在过渡态,氟离子对过渡态的形成和转变起到重要作用.在诱导期初期固相是富铝的,但晶体生长期固相硅铝比基本不变,表明硅铝同步进人骨架.     

高负载量丝光沸石/堇青石整体式催化剂的原位合成和表征

采用原位合成法制备了高负载量的丝光沸石/堇青石整体式催化剂，考察了晶种添加、晶化方式(静/动态)和投料硅铝比等因素的影响，通过称重计算了丝光沸石负载量，并结合XRD，SEM等表征手段对其结晶状况和形貌进行了分析。结果表明，原位合成可有效制备高负载量(最高可达47.4%)的丝光沸石/堇青石整体式催化剂。晶种添加有利于提高丝光沸石负载量。静态晶化负载量一般高于动态晶化，但动态晶化方式则有利于更高水硅比条件下丝光沸石的生成。投料硅铝比和晶化方式的协同作用，共同影响分子筛负载量和形貌。     

在双胺非水体系中ZSM—5沸石的合成及特性

本研究首次提出并完成了双胺非水体系中ZSM-5沸石的合成。采用XRD、IR、~(20)Si-NMR等技术探讨了该体系的沸石合成机理,并对该类沸石特性作了表征。过程跟踪信息表明,这个过程为一个典型的固相转化过程,因而为固相机理的存在提供了可靠根据。XRD的结果表明,与水热体系相比较,双胺非水体系沸石产品的晶胞体积出现收缩趋势。在CO的加氢反应中,CO转化率为47.0%,C_2—C_4烯烃的选择性为44.6%。     

ZSM-5、ZSM-57分子筛和丝光沸石间的转晶规律

考察了硅铝比、碱度、有机胺模板剂、晶化时间及温度等合成条件对ZSM-5、ZSM-57 分子筛和丝光沸石之间相互转晶的影响. 发现较高的碱度、较长的晶化时间有利于合成丝光沸石；较低的碱度、较高的诱导晶化温度、较长的晶化时间有利于合成低硅铝比的ZSM-57 分子筛；合成低硅铝比的ZSM-5分子筛则需要在能合成丝光沸石和ZSM-57 分子筛的碱度区间内精确调节碱度, 缩短晶化时间、降低诱导晶化温度、加入适当晶种, 有利于合成低硅铝比的ZSM-5 分子筛. 合成条件稍微改变, 会导致各种沸石之间发生转晶, 晶化产物出现两种或两种以上的晶型.     

NaA,MAP和MAX高铝沸石的结构定向及其转晶

本文根据不同沸石的结构特点及其在晶化动力学上的差异,由化学组成相近的硅铝凝胶混合物(投料Si/Al比约为1)定向合成出具有不同骨架结构的高铝沸石—NaA,MAP和MAX。考察了沸石晶化过程中晶化导向剂、晶种以及金属阳离子在合成高铝沸石的结构导向作用以及上述三种高铝沸石间的转晶规律。同时本文首次发现了MAP沸石的“室温固相转晶”现象。     

四乙烯溴化铵—氟化物复合模板剂合β沸石（Ⅱ）：β沸石 …

采用ＦＴ－ＩＲ、ＸＲＤ，ＳＥＭ，ＴＧ，ＩＣＰ－ＡＥＳ等技术研究了四乙经铵－氟化物复合模板剂体系合成β沸石的晶化过程。，发现本体系β沸石的合成遵循液相转变机理，在诱导期向生长期转变的转折点存在过渡态，氟离子对过渡态的形成和转变起重要作用。在诱导期初期固是富铝的，但晶生长期固相硅铝比基本不变，表明硅铝同步进入骨架。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.