液相单根分散石墨烯纳米带的化学合成与光物理性质

结构精确的石墨烯纳米带(GNRs)因具有独特的光、电、磁等物理性能,吸引了化学、物理、材料科学等领域研究人员的广泛关注。由于GNRs间强的π-π相互作用使得GNRs在溶液中难以分散,严重阻碍了其液相物化性能的研究和光电器件的制备。因此,实现GNRs在液相中的分散,特别是单根分散,是研究GNRs液相物化性质及其光电器件制备需首要解决的关键问题。上海交通大学麦亦勇团队在可液相分散的GNRs化学合成方面展开了研究,在纳米带的聚合物功能化、液相分散、超分子自组装,光热转化等方面取得了突破性的进展。近期,该团队通过在纳米带边缘引入大尺寸的类三蝶烯刚性基团,通过其大于石墨层间距(约0.34nm)的分子尺寸极大地减弱了GNRs主干之间π-π相互作用,实现了GNRs在常用溶剂中的高质量浓度(5mg/mL)分散,同时实现了GNRs在低质量浓度(小于0.1mg/mL)下的单根分散,并用超快光谱和二维电子谱等研究了单根分散纳米带在液相中的光物理性质。这一突破性成果为研究单根石墨烯纳米带的液相物理性质及其潜在应用探索开辟了道路。     

适体功能化的金纳米棒用于癌症靶向治疗的研究进展

金纳米棒(gold nanorods,GNRs)具有特殊的光学性质、较大的比表面积、出色的光热转换性能、表面易修饰等特点,在药物递送、光疗、生物成像和化学传感等领域应用十分广泛。适体是短的单链DNA或RNA片段,可特异性识别癌细胞或其表面的膜蛋白。近年来,适体功能化的GNRs在癌症靶向治疗领域显示出良好的应用前景。根据GNRs对癌症作用机制的差异,本文从光热疗法、光动力疗法、化疗和联合疗法4个方面总结了适体功能化的GNRs在癌症靶向治疗中的最新进展,并对该领域面临的主要挑战和发展趋势进行了探讨与展望。     

结构精确石墨烯纳米带的水相超分子自组装及其光热转换应用

近年来,结构规则的石墨烯纳米带(GNRs)因具有可控的光、电、磁等物理性能而吸引了人们的广泛关注,但是,GNRs之间很强的π-π相互作用使其在溶剂中难以分散,严重阻碍了人们对其液相物化性能,以及对其超分子组装和潜在应用的研究。上海交通大学麦亦勇研究团队采用溶液合成法,合成了具有精确结构的GNRs,并在其边缘接枝亲水聚氧化乙烯(PEO)柔性链,获得一种新型的"rod-coil"大分子刷GNR-PEO。GNR-PEO在常用有机溶剂以及水中具有良好的分散性;在水中分散质量浓度可高达0.5mg/mL(GNR骨架质量浓度)。更有趣的是,GNR-PEO在水相中自组装成超长的一维条带或具有可控直径和螺距的弹簧状螺旋超分子结构。该超分子组装体在水中呈现近红外吸收,并能高效地将近红外光转换成热量。他们的研究不仅实现了GNRs的液相分散,极大拓宽了GNRs的研究范围,也证明了GNRs在光热转换领域的潜在应用,为GNRs在光热肿瘤治疗等领域的应用开发开辟了途径。     

新型材料石墨烯组装研究进展

石墨烯是近几年研究的一种具有二维平面结构的热门材料,它具有单电子结构,有很多特殊的物理和化学的性质。关于石墨烯的制备,功能化及应用方面的研究已经成为当前的前沿和热点课题。关于石墨烯组装的研究目前还没有制备方面成熟。主要介绍了几种石墨烯组装的方法并对其进行了展望,包括有机小分子组装,共聚组装,LB技术组装,非共价键组装。组装后的石墨烯具有了一些新的性质和功能,溶解性得到了极大的改善。     

神奇的石墨烯

新材料石墨烯有许多与众不同的性质,正在成为各国研究和投入的热点。在查阅大量文献的基础上,对何谓石墨烯、石墨烯的结构、性质、制备、功能和神奇应用等方面进行简要介绍。     

石墨烯-量子点复合材料的制备与应用

石墨烯因其独特的物理化学性质以及潜在的巨大应用价值引起了越来越多的研究兴趣,但其特殊的零带隙结构却限制了它在光电领域的应用。半导体量子点因其特有的量子尺寸效应而表现出迷人的光学性能,已成功应用于生物标记及电化学等领域,但电子-空穴对易复合湮灭,导致电子迁移率较低,限制了其在光电转换方面的应用。石墨烯独特的结构和电子特性使其成为优秀的导电支架,可从量子点中捕获并输运电子,实现了电子空穴对的有效分离。石墨烯-量子点复合材料不仅具有石墨烯的高电子传输性能,而且具备量子点特殊结构产生的量子尺寸效应和边缘效应,二者复合后在纳米器件和光电器件等领域极具应用潜力。本文详细总结了近年来石墨烯-量子点复合材料的制备方法,包括相转移法、静电复合、水热和溶剂热法以及电化学法和微波辅助法等,并简要介绍了相关应用领域的研究进展,以期为石墨烯基纳米复合材料的发展研究提供相关的参考与依据。     

石墨烯的边界效应在电化学生物传感器中的应用

石墨烯是由底面和边界组成的,这种独特的结构赋予石墨烯很多特殊的性质,如边界上的异相电子转移速率、电容量、局域态密度和结构缺陷、功能性基团等均高于石墨烯的底面,这些固有特征对石墨烯的电化学性能有极大的促进作用,是边界效应的具体体现。本文在阐述石墨烯电化学性能边界效应的基础上,对具有不同形貌特征的石墨烯,如石墨烯纳米片、纳米毯、片晶、纳米墙、纳米纤维、纳米带、量子点等在电化学生物传感领域的具体应用进行了综述和展望。     

石墨烯材料在蛋白质和核酸分离/检测中的应用进展

石墨烯是碳材料家族新兴成员之一,因其具有化学性质稳定、良好生物兼容性、催化性、零带隙、特殊的电子能带等特点而受到科学家们广泛关注。 石墨烯特殊的六元环基底平面对很多分子、离子具有亲和性,可通过非共价键或共价键将目标物质富集于表面,大多数情况下被吸附的物质在特定条件下易解吸且不会引起其结构和性质的改变。 石墨烯因而在生物成像、生物医学、光催化、生物传感、药物载体和释放、 环境等方面应用前景广阔。 本文主要论述石墨烯和它的衍生物在生命大分子( 蛋白质和核酸) 分析化学方面的应用,并展望了其发展趋势。     

新型碳材料——石墨烯的制备及其在电化学中的应用

作为单原子厚度的二维碳原子材料,石墨烯由于其特殊的结构和物化性能而成为目前碳基材料中的一个研究热点。本文主要介绍了石墨烯及其复合纳米材料制备的一些新方法。结合石墨烯优良的导电性和生物相容性,论述了石墨烯在电化学分析领域,以及电催化、超级电容器和电化学电池等方面的应用。     

石墨烯的功能化及其相关应用

石墨烯是2004年才被发现的一种新型二维平面纳米材料,其特殊的单原子层结构决定了它具有丰富而新奇的物理性质．过去几年中,石墨烯已经成为了备受瞩目的国际前沿和热点．在石墨烯的研究和应用中,为了充分发挥其优良性质,并改善其成型加工性（如分散性和溶解性等）,必须对石墨烯进行功能化,研究人员也在这方面开展了积极而有效的工作．但是,关于石墨烯的功能化方面的研究还处在探索阶段,对各种功能化的方法和效果还缺乏系统的认识．如何根据实际需求对石墨烯进行预期和可控的功能化是我们所面临的机遇和挑战．本文重点阐述了石墨烯的共价键和非共价键功能化领域的最新进展,并对功能化石墨烯的应用作了介绍,最后对相关领域的发展趋势作了展望．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.