非晶聚对苯二甲酸乙二酯的制备与表征

通过单体酯交换法和聚 2 ,6 萘二甲酸乙二酯 (PEN)与低分子量PET酯交换的方法分别合成了一系列NPA/TPA/EG和IPA/TPA/EG共聚酯 .随着NPA或IPA单元含量的增加 ,等温结晶速度迅速降低 ,共聚物的结晶性降低甚至非晶化 .由NMR分析得知单体酯交换法与聚合物酯交换法得到的共聚酯NPA/TPA/EG序列分布相近 ,链结构都接近完全无规 .由DSC结果分析 ,随共聚单体含量的增加 ,熔点和熔融热降低 ,结晶度也随之降低 .当NPA或IPA含量达到 2 0 %时 ,可以得到非晶的共聚酯 (APET) .本文还对共聚物组成与结晶温度的关系进行了表征     

用1H-和13C-NMR方法研究聚对苯二甲酸乙二酯/聚一氧基苯甲酸酯共聚酯的序列分布

 测定了PET/30PHB和PET/60PHB共聚酯的高分辨¹H和¹³C谱,并采用INEPT方法和部分弛豫FT技术确定了季碳吸收峰,对NMR谱进行了归属.应用我们先前提出的方法对共聚酯的序列分布进行了表征.结果表明,两种共聚酯的无规度B_q值均小于1,序列分布不象Jackson等认为的那样为完全无规的.此外,文中还指出,某些研究者套用Flory公式判别PET/PHB共聚酯是否为无规的不妥之处.     

聚对苯二甲酸乙二酯(PET)/聚对乙酰氧基甲酸(PHB)共聚酯及同类共聚物序列分布表征的数学统计

由聚对苯二甲酸乙二酯(PET)和对-乙酰氧基苯甲酸制得的PET/PHB共聚酯代表了一类序列结构较一般二元共聚物复杂的共聚体系.在揭示了这类共聚物与序列分布有关的诸概率参数中只有一个是独立的之后,定义了参数B_q来描述此类共聚物的无规度.并指出,共聚物B_q=b时的序列分布,可以从一般二元共聚物无规度B=b时的序列结构加以推断.     

用~1H-和~(13)C-NMR方法研究聚对苯二甲酸乙二酯/聚一氧基苯甲酸酯共聚酯的序列分布

测定了PET/30PHB和PET/60PHB共聚酯的高分辨~1H和~(13)C谱,并采用INEPT方法和部分弛豫FT技术确定了季碳吸收峰,对NMR谱进行了归属.应用我们先前提出的方法对共聚酯的序列分布进行了表征.结果表明,两种共聚酯的无规度B_q值均小于1,序列分布不象Jackson等认为的那样为完全无规的.此外,文中还指出,某些研究者套用Flory公式判别PET/PHB共聚酯是否为无规的不妥之处.     

Attempt to control monomer sequences in copolycondensations of IPA,TPA, BPA,and PHB

Copolycondensations of IPA, TPA, BPA, and PHB were studied to investigate how PHB, which can form mesogenic segments, should be incorporated into the amorphous IPA/TPA–BPA polyester to obtain the thermotropic copolyester, unlike other copolymerizations studied so far by randomly introducing nonmesogenic components into the liquid crystalline polyesters. Random and controlled copolycondensations were attempted to regulate the segment length of mesogenic PHB units by stepwise addition of BPA and PHB through the two- and three-stage reactions using TsCl/DMF/Py as a condensing agent. Thermotropic copolyesters with ca. 40 mol % PHB could be obtained by a three-stage reaction, despite that more than 70 mol % PHB is needed to prepare by usual random copolymerization with PHB. The segment length of the PHB unit was indirectly studied from IPA/TPA–BPA oligomer distribution at initial reaction by means of GPC and from the NMR analysis of the resulting copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2371–2377, 1999     

含二羟基二苯酮的系列热致液晶共聚酯的合成和表征──Ⅲ．含4，4＇－二羟基二苯砜结构的共聚酯

含二羟基二苯酮的系列热致液晶共聚酯的合成和表征──Ⅲ．含４，４＇－二羟基二苯砜结构的共聚酯董德文，池振国，倪玉山，丁孟贤（中国科学院长春应用化学研究所长春１３００２２）陈玉（东北师范大学分析测试中心长春１３００２４）关键词４，４＇－二羟基二苯酮，热致...     

聚对苯二甲酸乙二酯(PET)/聚对乙酰氧基甲酸(PHB)共聚酯及同类共聚物序列分布表征的数学统计

 由聚对苯二甲酸乙二酯(PET)和对-乙酰氧基苯甲酸制得的PET/PHB共聚酯代表了一类序列结构较一般二元共聚物复杂的共聚体系.在揭示了这类共聚物与序列分布有关的诸概率参数中只有一个是独立的之后,定义了参数B_q来描述此类共聚物的无规度.并指出,共聚物B_q=b时的序列分布,可以从一般二元共聚物无规度B=b时的序列结构加以推断.     

含二羟基二苯酮的系列热致液晶共聚酯的合成和表征──Ⅲ．含4，4＇－二羟基二苯砜结构的共聚酯

hermotropic liquid crystalline copolyesters were synthsized from his(4-hydroxyphenyl) methanone (BHP), tereplithalic acid (TPA), p-hydroxybenzoic acid (PHB) and dihydroxydiphenyl sulfone(DPS). The properties of the copolyesters were characterized by polarized microscope with a hot stage, wide angle X-ray diffraction and differential scanning calorimetry. The results show that the copolyesters containing the BHP exhibit nematic liquid crystallinity.     

聚β-羟基丁酸酯和聚ε-己内酯的酯交换反应

以辛酸亚锡为催化剂 ,研究了聚 β 羟基丁酸酯 (PHB)与聚ε 己内酯 (PCL)在液相条件下的酯交换反应 .讨论了反应时间 ,反应温度和催化剂浓度对酯交换反应的影响 .采用1 3C NMR ,FTIR ,DSC ,WAXD和TGA等方法对PHB和PCL共聚酯 (PHB co PCL)的结构进行了表征 ,并对其结晶行为、晶体结构和热稳定性进行了研究 .结果表明 ,通过酯交换反应 ,所得到的共聚酯为嵌段共聚物 .提高反应温度和延长反应时间有利于酯交换反应的发生 .随着酯交换量的增加 ,PHB co PCL的结晶行为发生很大的变化 .但是 ,PHB co PCL晶体结构并没有因为PCL链段的引入而发生变化 ,而且它的热稳定性在空气气氛中略有提高     

Synthesis and characterization of poly(β‐hydroxybutyrate) and poly(ϵ‐caprolactone) copolyester by transesterification

To synthesize the copolyester of poly(β‐hydroxybutyrate) (PHB) and poly(?‐caprolactone) (PCL), the transesterification of PHB and PCL was carried out in the liquid phase with stannous octoate as the catalyzer. The effects of reaction conditions on the transesterification, including catalyzer concentration, reaction temperature, and reaction time, were investigated. The results showed that both rising reaction temperature and increasing reaction time were advantageous to the transesterification. The sequence distribution, thermal behavior, and thermal stability of the copolyesters were investigated by ¹³C NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, wide‐angle X‐ray diffraction, optical microscopy, and thermogravimetric analysis. The transesterification of PHB and PCL was confirmed to produce the block copolymers. With an increasing PCL content in the copolyesters, the thermal behavior of the copolyesters changed evidently. However, the introduction of PCL segments into PHB chains did not affect its crystalline structure. Moreover, thermal stability of the copolyesters was little improved in air as compared with that of pure PHB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1893–1903, 2002     

Terephthalic Acid Copolyesters Containing Tetramethylcyclobutanediol for High-Performance Plastics

There is a need for high-performance applications for terephthalic acid (TPA) polyesters with high heat resistance, impact toughness, and optical clarity. Bisphenol A (BPA) based polycarbonates and polyarylates have such properties, but BPA is an endocrine disruptor. Therefore, new TPA polyesters that are less hazardous to health and the environment are becoming popular. Tetramethylcyclobutanediol (TMCD) is a difunctional monomer that can be polymerized with TPA and other diols to yield copolyesters with superior properties to conventional TPA polyesters. It has a cyclobutyl ring that makes it more rigid than cyclohexanedimethanol (CHDM) and EG. Thus, TMCD containing TPA copolyesters can have high heat resistance and impact strength. TPA can be made from abundantly available upcycled polyethylene terephthalate (PET). Therefore, this review discusses the synthesis of monomers and copolyesters, the impact of diol composition on material properties, molecular weight, effects of photodegradation, health safety, and substitution of cyclobutane diols for future polyesters.     

液晶嵌段共聚物PET/60PHB-b-PC的合成及结构与性能

采用ＰＥＴ齐聚物的原位乙酰化法通过加入少量乙二醇（ＥＧ）合成了端羟基液晶聚合物ＰＥＴ／６０ＰＨＢ，并将其作为大单体，与双酚Ａ及碳酸二苯酯通过熔融酯交换法，进一步制得了液晶嵌段共聚物ＰＥＴ／６０ＰＨＢ ｂ ＰＣ．研究了合成规律，并借助粘度测定、ＤＳＣ、偏光显微镜、Ｘ 光衍射和红外光谱分析等手段对合成的液晶嵌段共聚物进行了表征．研究表明，当ＰＥＴ齐聚物的ηｉｎｈ＝００５～００７ｄＬ／ｇ，Ａｃ２Ｏ／ＰＨＢ（ｍｏｌ／ｍｏｌ）＝１３，ＥＧ／ＰＥＴ（ｍｏｌ／ｍｏｌ）＝００６时能获得颜色、液晶性、溶解性均很好的端羟基液晶聚合物ＰＥＴ／６０ＰＨＢ，以此液晶聚合物为原料，采用合适的配方与工艺，能获得粘度较高、液晶性较好，并且熔体流动性很好的液晶嵌段共聚物ＰＥＴ／６０ＰＨＢ ｂ ＰＣ．通过偏光显微镜与Ｘ 光衍射观察，证明此嵌段共聚物呈现向列型液晶织构，但其液晶态织构与纯ＰＥＴ／６０ＰＨＢ、ＰＥＴ／６０ＰＨＢ和ＰＣ的混合物明显不同．此外，还初步建立了用红外的分析手段鉴定液晶聚合物ＰＥＴ／６０ＰＨＢ端基的方法．     

一种新型阻燃抗熔滴共聚酯的合成及表征

双酚A与碳酸乙烯酯反应得到改性单体双(羟乙基)双酚A(BHEEB),BHEEB与对苯二甲酸、乙二醇及阻燃剂[(6-氧代-6H-二苯并[c,e][1,2]氧磷杂己环-6-基)甲基]丁二酸(DDP)通过无规共聚合成了一种新型阻燃共聚酯PBPET.用1H-NMR、ICP-AES对共聚酯的结构进行了表征,用热重分析(TGA)、氧指数(LOI)测定、垂直燃烧测试等对共聚酯的热稳定性、阻燃性和熔滴行为进行了研究.结果表明,BHEEB可以提高共聚酯的热稳定性,含5 mol%BHEEB与4.8 mol%DDP的共聚酯P4.8B5PET,其TGA测试中600℃下氮气氛残炭(wt6R00)可达18.0%.燃烧测试表明,P4.8B5PET的LOI值可达37.0,垂直燃烧达V-0级,并且改性单体BHEEB的引入还能有效地改善聚酯燃烧时的熔滴行为.     

Synthesis and characterization of fully aromatic thermotropic liquid‐crystalline copolyesters containing m‐hydroxybenzoic acid units

A series of fully aromatic copolyesters based on p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA), terephthalic acid (TPA), and m‐acetoxybenzoic acid (m‐ABA) were prepared by a modified melt‐polycondensation reaction. The copolyesters were characterized by DSC, thermogravimetric analysis, ¹H NMR, polarized optical microscopy, X‐ray diffraction, and intrinsic viscosity measurements. The copolyesters exhibited nematic liquid‐crystalline phases in a broad temperature range of about 150 °C, when the content of linear (p‐ABA, HQDA, and TPA) units was over 67 mol %. DSC analysis of the anisotropic copolyesters revealed broad endotherms associated with the nematic phases, and the melting or flow temperatures were found to be in the processable region. The flow temperatures and crystal‐to‐nematic and nematic‐to‐isotropic transitions depend on the type of linear monomer units, and these transitions increased as the content of the p‐ABA units increased, as compared to the HQDA/TPA units. When the content of the p‐ABA units increased, as compared to other linear units (HQDA and TPA), the intrinsic viscosity and degree of crystallinity of the copolyesters also increased, implying a higher reactivity for p‐ABA in the p‐ABA/HQDA/TPA/m‐ABA polymer system. The aromatic region in the ¹H NMR spectra of the copolyesters containing equal molar compositions of p‐ABA, HQDA, and TPA units were sensitive to the sequence distribution of aromatic rings. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3263–3277, 2001     

SYNTHESIS AND AVERAGE SEQUENCE LENGTH DETERMINATION OF AROMATIC-ALIPHATIC COPOLYESTERS CONTAINING POLY(ALKYLENE OXALATE) UNITS

Two series of aromatic-aliphatic random copolyesters(PEBTOXS)with diverse diol ratios have been synthesized by direct melting polycondensation.Two kinds of diols(glycol(EG)and 1,4-butanediol(BD))are used in combination in order to adjust crystallization and tensile properties,and three kinds of diacids(dimethyl terephthalate(DMT),diethyl oxalate(DEOX),and sebacic acid(SA))are involved.~1H-NMR spectra quantify both composition and structure,and show that the final contents in copolyesters appropriate to t...     

固态后缩聚方法合成高分子量的含磷热致性液晶共聚酯

为了获得较高分子量的具有高阻燃性的热致性液晶高分子,通过固态聚合方法合成了一种基于对羟基苯甲酸、对苯二甲酸、乙二醇和含磷菲环取代二酚的高热稳定性、较低相转变温度和宽的液晶相转变温度范围的含磷液晶共聚酯(BDQTEP),并对该含磷液晶共聚酯预聚物(pre-BDQTE)在不同固态聚合条件下获得的聚合物热性能和液晶性进行了研究.对其固态反应速率控制进行了初步的探讨,当反应温度为235℃时,固态聚合反应较为理想.在聚合的初始阶段,共聚酯特性黏数[η]、黏流温度Tf和羧基浓度[COOH]均随聚合时间而明显变化,但在6 h后变化较小,几乎不变.通过固态后缩聚,将熔融聚合获得的特性黏数[η]=0.44 dL/g的含磷液晶共聚酯BDQTE的特性黏数提高了近两倍.     

Preparation and characterization of biodegradable aliphatic-aromatic copolyesters/nano-SiO_2 hybrids via in situ melt polycondensation

In situ melt polycondensation was proposed to prepare biodegradable aliphatic-aromatic copolyesters/nano-SiO_2 hybrids based on terephthalic acid(TPA),poly(L-lactic acid) oligomer(OLLA),1,4-butanediol(BDO) and nano-SiO_2.TEM and FT-IR characterizations confirmed that TPA,OLLA and BDO copolymerized to obtain biodegradable copolyesters,poly(burylene terephthalate-co-lactate)(PBTL),and the abundant hydroxyl groups on the surface of nano-SiO_2 provided potential sites for in situ grafting with the simultaneo...     

Biodegradable aliphatic/aromatic copolyesters based on terephthalic acid and poly(L-lactic acid): Synthesis, characterization and hydrolytic degradation

<正>Biodegradable aliphatic/aromatic copolyesters,poly(butylene terephthalate-co-lactate)(PBTL) were prepared via direct melt polycondensation of terephthalic acid(TPA),1,4-butanediol(BDO) and poly(L-lactic acid) oligomer(OLLA). The effects of polymerization time and temperature,as well as aliphatic/aromatic moiety ratio on the physical and thermal properties were investigated.The largest molecular weight of the copolyesters was up to 64100 with molecular weight distribution index of 2.09 when the polycondensation was carried out at 230℃for 6 h.DSC,XRD,DMA and TGA analysis clearly indicated that the degree of crystallinity,glass-transition temperature,melting point,decomposition temperature, tensile strength,elongation and Young's modulus were influenced by the ratio between TPA and OLLA in the final copolyesters.Hydrolytic degradation results demonstrated that the incorporation of biodegradable lactate moieties into the aromatic polyester could efficiently improve hydrolytic degradability of the copolymer even though it still had many aromatic units in the main chains.     

PROPERTIES AND MICROSTRUCTURE OF AROMATIC LIQUID CRYSTALLINE COPOLYESTERS

The properties and structures of thermotropical liquid crystalline copolyesters basedon p-hydroxybenzoic acid (PHBA), terephthalic acid (TPA) and bisphenol A (BPA) werestudied by DSC, WAXD, hot stage polarized microscopy and NMR. It was found that mostof the copolyesters were soluble in many common organic solvents. The copolyesters hadfow T_m/T_f values and a broad range of liquid crystal phase, making the polymers readilymelt-processable. The effects of annealing at different temperatures on the copolyestercontaining 33% PHBA were also discussed. It was noted that annealing at ca. 200℃(below Tc - n) could lead to the increasing of the crystallinity of the copolyester while themicrostructure and sequence structure had not changed. Annealing at ca.280℃ (nearTc - n) could bring a change of crystal and sequence structure and simultaneously madethe ndcrodomains be ordered more perfectly.     

Sequence distribution in polyethylene/tetramethylene terephthalate copolyesters by 13C-NMR

¹³C-NMR gives sequence information in copolyesters synthesized from ethylene glycol (EG), 1,4-butane diol (BD), and methyl terephthalate (TP). The EG-TP-EG and BD-TP-BD blocks are distinguishable from the unsymmetrical diester sequence EG-TP-BD. The carbonyl and aromatic quaternary carbons of terephthalate have different chemical shifts but identical relaxation times and nuclear Overhauser enhancements in the three different triad sequences. Peak areas indicate random copolymerization of the three copolyesters studied.