紫外光照射制备具有光学活性的银纳米粒子

以脱氧胆酸钠（NaDC）为还原剂、稳定剂,经紫外光辐照AgNO₃溶液在室温下制备出尺寸30nm左右的类球形的银纳米粒子。用紫外-可见光谱、透射电镜、圆二色谱和傅立叶变换红外光谱等测试手段对所制备的脱氧胆酸钠包裹的银纳米粒子进行了表征。红外光谱结果表明,在紫外光激发下,脱氧胆酸钠甾环上12α-OH发生氧化反应,同时还原Ag⁺为单质银,并聚集生成银纳米粒子。溶液的pH值对光化学氧化还原反应速度有着重要的影响,增加溶液的pH值,Ag⁺的还原反应速度明显加快。在吸附在银粒子表面的脱氧胆酸钠的手性氛围诱导下,生成的银纳米粒子在其表面等离子体共振区域出现手性信号。     

维生素E绿色还原法制备银纳米粒子的研究

采用一种绿色还原法制备银纳米粒子,以维生素E为还原剂,淀粉为稳定剂,在液相中还原硫酸银,通过改变溶液的pH值和反应时间,得到不同粒径的黄色银纳米粒子,并分别采用透射电镜、红外光谱、紫外-可见吸收光谱、扫描电镜和电化学方法对银纳米粒子进行表征。结果表明:维生素E在溶液中被氧化生成苯醌,反应得到的银纳米粒子为球形,粒径为8~25 nm;在较强碱性条件下,得到的银纳米粒子尺寸较小,分布较均匀,其平均粒径约为10 nm;不同条件下生成的银溶胶分别在417、411、409、408 nm处出现紫外吸收峰,这些吸收峰均为银纳米粒子的表面共振吸收;生成的银纳米粒子具有很好的电化学性质,并对L-半胱氨酸的电化学反应显示了良好的催化活性。     

Au/Ag核一壳结构复合纳米粒子形成机制的研究

在已制备好的Au纳米粒子表面,通过化学还原的方法沉积生长Ag包覆层,通过 控制Au, Ag的比列,制备了粒度均匀且粒径可控的Au/Ag核-壳结构纳米粒子。利用 UV-vis吸收光谱和透射电子显微镜（TEM）对SAu, Ag摩尔比为1：10的复合纳米粒 子的光学性质和形态进行随时监测,直接观察了核-壳结构纳米粒子的生长过程： 一部分Ag+在Au核表面还原生长,溶液中其余Ag+还原形成银的纳米团簇向粒子表面 的继续沉积生长,壳层增厚。     

Au/Ag核一壳结构复合纳米粒子形成机制的研究

在已制备好的Au纳米粒子表面，通过化学还原的方法沉积生长Ag包覆层，通过 控制Au, Ag的比列，制备了粒度均匀且粒径可控的Au/Ag核-壳结构纳米粒子。利用 UV-vis吸收光谱和透射电子显微镜（TEM）对SAu, Ag摩尔比为1：10的复合纳米粒 子的光学性质和形态进行随时监测，直接观察了核-壳结构纳米粒子的生长过程： 一部分Ag+在Au核表面还原生长，溶液中其余Ag+还原形成银的纳米团簇向粒子表面 的继续沉积生长，壳层增厚。     

ZnO/Ag复合纳米粒子的制备与表征

以乙酸锌为前驱物,乙醇为溶剂,油酸钠为表面修饰剂,采用溶液化学法,在乙醇体系中制得纳米Zn O。然后缓慢加入一定量的硝酸银乙醇溶液,在乙醇的还原作用下将Ag+还原为Ag纳米粒子,制得Zn O/Ag复合纳米粒子。通过紫外-可见吸收光谱(UV-Vis)、荧光光谱(FL)、透射电子显微镜(TEM)和X射线衍射(XRD)等方法对所制备的氧化锌-银复合纳米粒子样品进行表征。结果表明,所合成的Zn O/Ag复合纳米粒子为球形,尺寸为20-30nm且粒径分布较窄。Ag纳米粒子附着于Zn O纳米粒子表面,并起到良好的表面修饰作用。对制备Zn O/Ag复合纳米粒子的机理进行了初步探究。     

聚丙烯腈纳米纤维载银复合膜绿色制备及其催化性能

采用静电纺丝技术和化学镀方法相结合的方法,用聚丙烯腈(PAN)纳米纤维作为载体,以绿色环保的胺化改性替代化学镀传统的敏化、活化前处理,再化学镀银制备胺化聚丙烯腈纳米纤维载银复合膜(Ag/APAN).SEM、XPS、XRD、FTIR等结果表明,银离子能够吸附在经胺化处理后的PAN纳米纤维表面,且能够在纤维表面生成少量单质银;单质银作为催化活性中心,有效地促进化学镀银的进行,在PAN纳米纤维表面生成均匀致密的银纳米粒子层,制备出了以PAN纳米纤维为核,银层为壳的核壳结构复合膜.银纳米粒子附着在纳米纤维表面,可以使银纳米粒子的催化性能得到充分发挥.通过对催化邻-硝基苯胺与硼氢化钠之间氧化还原反应的研究表明,所制备的Ag/APAN纳米纤维复合膜具有很好的催化效果,且不会造成反应体系的二次污染.     

基于在位光还原银胶法的表面增强拉曼散射技术检测核酸碱基

在环状有机物存在的条件下,Ag+经激光诱导可发生光还原反应,形成Ag原子聚集的银胶体.本研究通过拉曼散射光谱、紫外-可见光谱和扫描电镜证明,核酸碱基和Ag+混合溶液经过激光诱导可以生成银胶体颗粒.随着银胶体的生成,核酸碱基的拉曼光谱信号因为表面增强拉曼散射效应而得到明显增强.实验表明,本方法不但可以获得高信噪比的拉曼光...     

Cu2O/Ag纳米复合物的表面增强拉曼光谱

用一种简单的化学还原方法制备了银纳米粒子包覆的氧化亚铜（Cu2O）纳米复合物。扫描电子显微镜显示Cu2O 为八面体型的纳米粒子,表面光滑,结构对称。包覆的Ag部分占据Cu2O粒子表面。通过比较Ag/Cu2O纳米复合物、Ag溶胶及Cu纳米粒子表面吸附的4-巯基吡啶（4-Mpy）分子表面增强拉曼光谱（SERS）发现,利用此方法得到了Cu2O粒子表面吸附分子的拉曼光谱。银纳米粒子所产生的电磁场增强又增强了吸附在Cu2O上的4-Mpy拉曼信号。这种方法为初步研究Cu2O表面吸附分子性质提供了依据,扩宽了SERS的使用范围,使SERS应用在纳米半导体材料上成为可能。     

一步法制备PNIPAAm-g-PAN/PSt载银复合微球及其抗菌性能研究

以AgNO3为金属源,通过乙醇将与聚N-异丙基丙烯酰胺接枝聚丙烯腈/聚苯乙烯（PNIPAAm-g-PAN/PSt）聚合物微球表面酰胺基团配位的银离子（Ag+）还原,一步法制备了PNIPAAm-g-PAN/PSt载银复合微球。通过傅立叶变换红外（FTIR）和紫外-可见光光谱表征发现,由Ag+还原所得的Ag纳米颗粒被成功地固载在PNIPAAm-g-PAN/PSt 微球上;用透射电子显微镜（TEM）对载银微球的大小和形态进行了表征;热重分析（TGA）结果表明,固载在微球表面的银纳米颗粒的含量（质量分数）为12%;抗菌实验结果表明,所制备的载银微球具有抗革兰氏阴性菌的活性。     

基于MOF@TiN-Ag/银溶胶复合基底的茶碱表面增强拉曼检测

以制备的MOF@TiN-Ag/银溶胶复合基底为表面增强拉曼光谱(SERS)活性基底，对茶碱进行SERS检测，探讨了基于该复合基底的表面增强拉曼技术在药物检测方面的应用。首先，利用电化学阳极氧化结合氨气还原氮化法制备了氮化钛纳米管阵列，随后通过电化学沉积法制备TiN-Ag复合基底，并在其表面原位生长金属有机框架(MOF)包覆层得到MOF@TiN-Ag复合基底，将茶碱与银溶胶混合后滴加在该复合基底上进行表面增强拉曼光谱检测。结果表明，MOF@TiN-Ag/银溶胶复合基底中存在面心立方晶型TiN、金属单质Ag和MOF钴基3种物相；扫描电镜结果显示，TiN纳米管排列整齐，Ag纳米结构呈树枝状均匀分散在其表面；作为隔绝层的MOF粒子形状规整，覆盖在TiN-Ag表面；银溶胶纳米粒子呈圆球状分布在MOF@TiN-Ag复合基底表面。由于银纳米粒子与TiN-Ag复合基底可发生协同增强作用，加之MOF的富集特性，使得该复合基底具有优异的SERS性能，其对茶碱溶液的SERS检出限为1×10^-5 mol/L，检测性能良好。所制备的MOF@TiNAg/银溶胶复合基底拓宽了SERS在药物检测...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.