NiO/MgxSi1-xOy催化剂的制备及其在高温焦炉煤气中焦油组分催化裂解中的应用

采用溶胶-凝胶法制备了MgO和SiO2的二元复合氧化物载体, 通过浸渍法制得NiO/MgxSi1-xOy催化剂, 并使用Brunauer-Emmett-Teller(BET)吸附、载射线衍射(XRD)、透射电子显微镜(TEM)等对其进行表征. 以甲苯和萘的混合物作为高温焦炉煤气中焦油组分的模型化合物, 在固定床反应器中进行高温焦炉煤气中焦油组分催化裂解的研究. 结果表明, 催化剂的焙烧温度、反应空速以及载体中Mg和Si的原子比对反应活性有很大的影响. 在反应温度800 益、水碳摩尔比为0.7的条件下, 10%(w)NiO/Mg0.80Si0.20Oy催化剂能将甲苯和萘完全转化为CO、CH4等小分子气体, 显示出很好的催化活性、稳定性以及好的抗积炭性能.     

Ni/MgAl(O) 催化剂上高温焦炉煤气中焦油组分的催化转化

 采用共沉淀-水热法合成了一系列 Ni/MgAl(O) 催化剂. 用甲苯和萘的混合物作为焦油模型化合物, 在固定床反应器上研究了该催化剂直接催化转化具有较低水蒸气/碳摩尔比的高温焦炉煤气中焦油为小分子气体的反应. 考察了催化剂组成、水蒸气/碳摩尔比和反应条件等对催化剂性能的影响. 结果表明, Mg/Al 摩尔比为 3 时 Ni/MgAl(O) 催化剂表现出最优的催化性能. 在 700~800 oC 和水蒸气/碳摩尔比为 0.68 的反应条件下, 15%Ni/Mg3Al(O) 催化剂能将甲苯和萘完全转化为 CO 和 CH4 等小分子气体. 在反应气中引入 0.05% H2S(摩尔分数) 气体的实验表明, 该催化剂在焦油催化转化反应中具有较好的抗硫能力. 另外, 在催化剂中加入少量 Pt 助剂能显著提高催化剂活性.     

Ni/Ce-ZrO2/γ-Al2O3催化剂上高温焦炉煤气中焦油组分的常压加氢裂解

采用分步浸渍法制备了Ni/Ce-ZrO2/γ-Al2O3催化剂,并采用X射线衍射、透射电子显微镜、N2物理吸附和程序升温还原等方法对其进行了表征.该催化剂在以甲苯和萘为焦油模拟化合物的高温焦炉煤气常压加氢裂解反应中表现出良好的催化性能和一定的耐硫能力.在较低的水/碳摩尔比(S/C=0.44)条件下,甲苯和萘能够完全转化为小分子气体.向Ni/γ-Al2O3催化剂中加入适量的铈锆氧化物,能促使催化剂表面形成尺寸更小的镍纳米晶粒,并有效地抑制镍晶粒烧结,从而显著提高催化剂的稳定性.该类催化剂有望应用于具有较低水/碳摩尔比的高温焦炉煤气中焦油的直接除去.     

Ni/MgO-Al2O3催化剂上高温焦油组分的催化转化

采用分步浸渍法制备了MgO-Al2O3负载的Ni基催化剂, 并运用N2吸附、载射线衍射(XRD)、透射电子显微镜(TEM)等手段进行表征. 该催化剂用于甲苯或萘为焦油模拟化合物的高温焦炉煤气(COG)的常压加氢裂解反应, 并考察了H2浓度、H2S对催化剂活性的影响. 结果表明: 催化剂还原后, 表面形成均匀分散、直径为8-14 nm的金属Ni纳米颗粒; 在较低的水碳摩尔比(nH2O/nC=0.28)时, 甲苯就能完全转化并选择性地加氢裂解形成CH4, 测试的时间内(480 min), 催化剂没有明显的失活和积炭现象, 显示出好的反应活性、稳定性和耐硫能力. 制得的Ni/MgO-Al2O3催化剂有望应用于较低水含量(10%-15%(φ, 体积分数))的高温焦炉煤气中焦油的直接转化.     

NiO-MgO固溶体的形成对Ni/MgO-AN催化CO2重整CH4反应活性和稳定性的影响

 以在流动N2中热处理的Mg(OH)2醇凝胶制得的纳米氧化镁(MgO-AN)为载体,浸渍Ni(NO3)2后经不同温度焙烧得到Ni含量为8.8%的NiO/MgO样品,还原后制得Ni/MgO-AN催化剂. 采用XRD和TPR技术对NiO和MgO之间形成的NiO-MgO固溶体进行了表征,并将Ni/MgO-AN催化剂用于催化CO2重整CH4反应. 结果表明,在低于650 ℃焙烧时, NiO不能完全溶入MgO中,NiO/MgO样品中存在自由的NiO粒子,还原态Ni/MgO-AN催化剂在CO2重整CH4反应中的稳定性低; 当样品焙烧温度等于或高于650 ℃时,NiO可以完全溶入MgO中形成NiO-MgO固溶体,还原态Ni/MgO-AN催化剂具有高稳定性.     

P改性NiW/γ-Al2O3的低温焦油芳烃组分加氢性能研究

以γ-Al₂O₃为载体,采用浸渍法制备了不同P添加量的负载型NiW加氢催化剂,采用固定床加氢装置,对模型化合物萘和低温焦油富集的芳烃组分进行了催化加氢。催化剂采用N₂吸附、XRD、H₂-TPR、XPS以及NH₃-TPD的方法进行表征,加氢产物采用GC-MS和GC×GC-TOFMS进行分析。结果表明,P助剂能够扩大催化剂的孔径并促进活性金属组分在载体表面的分散;当P含量为1.0%~1.5%时,能够促进Ni-W-O混合相生成,并提高催化剂表面弱酸的含量;萘加氢反应的转化率和十氢萘的选择性也在添加1.0%的P时达到最高,分别为80%和50%左右;低温焦油芳烃组分的催化加氢结果显示,芳烃饱和加氢反应占优,绝大部分芳烃转化为环烷烃,且催化剂具有显著的脱除杂原子效果。     

甲烷催化燃烧中制备参数对NiO/CuO-ZrO2催化剂高温反应性能的影响

采用溶胶凝胶－超临界干燥的方法制备了NiO/CuO-ZrO2催化剂，分别考察了焙烧温度、活性组分含量对催化剂甲烷燃烧性能的影响，并利用XRD、物理吸附等手段考察了两个参数对催化剂性能影响的本质原因，发现NiO/CuO-ZrO2催化剂具有较高的催化活性，较好的高温（1 000 ℃）反应稳定性，焙烧温度对催化剂的影响很大，500 ℃是合适的焙烧温度，通过试验发现活性组分NiO为5 mol％时催化剂适于在相对较低的温度下使用，而NiO为15 mol％时，催化剂具有较好的高温稳定性。     

改性纳米HZSM-5催化剂上甲苯与甲醇的烷基化反应

以Si,P,Mg复合改性的纳米HZSM-5为催化剂,进行了甲苯与甲醇的烷基化反应;并采用X射线衍射,NH3程序升温脱附,红外和低温N2吸附等方法研究了改性前后催化剂酸性质和孔结构的变化.在小型固定床反应器上,考察了载气量、反应温度和重时空速等反应条件对烷基化反应性能的影响.在2h-1,460℃,甲苯/甲醇比,水/烃比和...     

Effect of preparation condition on catalytic performance of Ni/ZrO2-SiO2 for methanation of coal gas

采用浸渍法制备了ZrO2-SiO2复合载体和Ni质量分数为6％的Ni/ZrO2 -SiO2催化剂,考察了载体制备时浸渍溶液pH值、焙烧温度和催化剂制备时的焙烧温度对Ni/ZrO2-SiO2催化剂煤气甲烷化反应性能的影响.采用X射线衍射、程序升温还原和扫描电子显微镜等方法对催化剂进行了表征.结果表明,载体浸渍溶液pH值为8.0 ～9.0,载体焙烧温度为550℃,催化剂焙烧温度为450℃时,Ni/ZrO2-SiO2催化剂在煤气甲烷化反应中显示了最优的催化性能,CO转化率100％,CO2转化率1.8％,CH4生成速率16.6 mmol/(h·g).进一步表征发现,制备ZrO2-SiO2复合载体时,增大浸渍溶液的pH值有利于形成粒径较小的亚稳态四方晶相ZrO2,可见四方晶相ZrO2更有利于甲烷化反应;载体焙烧温度会影响到NiO粒径的大小和其在催化剂表面的分散,温度过高和过低都会导致NiO粒径大小的不适宜以及分散性的降低;催化剂焙烧温度过高则会导致NiO与载体间的相互作用减弱,NiO分散性降低.     

Ni/MgO-CeO2催化低温乙醇水蒸气重整制氢

采用固相燃烧法制备了MgO,CeO2载体和不同摩尔比的Mgo-CeO2复合载体,采用浸渍法制备了Ni/MgO,Ni/CeO2,Ni/Mgo-CeO2系列催化剂,考察了各催化剂催化乙醇水蒸气重整反应的性能.用BET技术测定了载体的比表面,并用X射线衍射(XRD)、程序升温还原(TPR)和热重(TG)技术对催化剂进行表征.结果表明,在Ni/CeO2和Ni/Mgo-CeO2上,Ni以高分散的NiO、体相NiO和与载体发生相互作用的NiO的形式存在,显示了良好的低温乙醇水蒸气重整性能;其中Mg,Ce摩尔比为1:1时,Ni/MgO-CeO2催化剂显示了良好的活性和选择性,并且具有很好的稳定性和抗积炭能力.     

ICP-AES测定铀污染土壤植物中铀的研究

采用电感耦合等离子体发射光谱(ICP-AES)对铀污染土壤植物中铀的测定方法进行了研究.在λU385.958 nm处,选择了仪器的最佳工作条件,考察了酸度和常见共存元素对测定的干扰情况,并且对比了干灰化消解和湿式消解对测定的影响.研究发现2%硝酸溶液为最佳介质,干扰离子对测定没有显著影响,干灰化消解比湿式消解得彻底.在选定条件下,方法检出限为0.18 mg·L-1,测定下限为0.61 mg·L-1,5.0000 mg·L-1的铀标准溶液的相对标准偏差RSD(n=10)为0.81%,方法回收率为96.2%～106.2%.该方法操作简单,快速.结果表明,用ICP-AES测定铀污染土壤植物样品中的铀是可行的.     

测定血清中Na 含量不确定度的评定

对血清中Na离子含量的测量不确定度进行评定。不确定度的来源主要包括Na离子标准工作液的配制过程、血清样品的定容消化制备、标准曲线拟合、钠离子各分量不确定度的合成等引入的不确定度计算出各分量的不确定度,通过合成得到测量结果的合成不确定度、扩展不确定度及测试结果的报告形式。     

Interpretation of inorganic arsenic metabolism in humans in the light of observations made in vitro and in vivo in the rat

The toxicity of inorganic trivalent arsenic for living organisms is reduced by in vivo methylation of the element. In man, this biotransformation leads to the synthesis of monomethylarsonic (MMA) and dimethylarsinic (DMA) acids, which are efficiently eliminated in urine along with the unchanged form (As_i). In order to document the methylation process in humans, the kinetics of As_i, MMA and DMA elimination were studied in volunteers given a single dose of one of these three arsenicals or repeated doses of As_i. The arsenic methylation efficiency was also assessed in subjects acutely intoxicated with arsenic trioxide (As₂O₃) and in patients with liver diseases. Several observations in humans can be explained by the properties of the enzymic systems involved in the methylation process which we have characterized in vitro and in vivo in rats as follows: (1) production of As_i metabolites is catalyzed by an enzymic system whose activity is highest in liver cytosol; (2) different enzymic activities, using the same methyl group donor (S-adenosylmethionine), lead to the production of mono- and di-methylated derivatives which are excreted in urine as MMA and DMA; (3) dimethylating activity is highly sensitive to inhibition by excess of inorganic arsenic; (4) reduced glutathione concentration in liver moderates the arsenic methylation process through several mechanisms, e.g. stimulation of the first methylation reaction leading to MMA, facilitation of As_i uptake by hepatocytes, stimulation of the biliary excretion of the element, reduction of pentavalent forms before methylation, and protection of a reducing environment in the cells necessary to maintain the activity of the enzymic systems.     

超临界流体萃取技术在提取中药挥发油中的应用

用超监介CO2流体萃取技术对多种中药挥发油的提取进行了综述,并将其与传统的水蒸馏法进行比较。结果表明,用超临界流体法不仅挥发油的收率高,而且提取时间也大大缩短。     

Assessment of performance of laboratories in determining acrylamide in crispbread

A proficiency testing round was undertaken to assess the performance of laboratories to measure acrylamide in a sample of crispbread. Retail samples of crispbread were ground to a fine powder and after thorough mixing were packed in 40 g units for distribution. Ten samples were selected at random and analyzed in duplicate for acrylamide by liquid chromatography/mass spectrometry (LC/MS). Standard statistical tests showed that the material was homogeneous for the purposes of proficiency testing. Test samples were distributed to 55 laboratories in 16 countries in Europe, North America, Australia, and the Middle East. The results were analyzed by standard proficiency testing statistical procedures, and laboratories were awarded z-scores on the basis of their reported results. Based on a target standard deviation (sigmap value) taken from the Horwitz equation, for a robust mean value of 1.2 mg/kg acrylamide, satisfactory results (z-score within +/- 2 for those between 0.8 and 1.6 mg/kg) were obtained by 86% of the 37 laboratories that returned results. Only 1 laboratory was unsatisfactory and 4 had questionable results. About equal numbers of laboratories used gas chromatography (GC)/MS and LC/MS procedures with about 25% using MS/MS and one using GC with electron capture detection. There was no evident trend in performance or bias in results. GC/MS and LC/MS data were evenly distributed across the population of laboratories reporting results.     

茶叶中高氯酸盐检测方法研究进展

茶叶中新型污染物高氯酸盐在近年来受到越来越多的关注,相应的检测技术也在不断加强.参考国内外文献,综述了茶叶中高氯酸盐的检测方法.目前,茶叶中高氯酸盐的检测方法主要有离子色谱法（IC）、离子色谱-质谱法（IC-MS）和高效液相色谱-串联质谱法（LC-MS-MS）.比较了不同检测方法的局限性和优越性,重点比较了高效液相色谱-串联质谱法不同前处理方法、净化小柱和检测条件的优劣,对茶叶高氯酸盐检测技术的发展和研究进行了展望,为检测茶叶中高氯酸盐的新材料研发和检测新标准的建立提供理论依据.     

成都西部金马地区土壤微量元素特征研究

对成都平原西部金马镇深层土壤取样分析,研究了具有指示意义的几种微量元素富集情况,揭示了土壤原生地球化学环境质量;通过异常信息的筛选,分析了各元素异常反映的地球化学及地质信息.     

Effect of vibration in processes of structure formation in polymers

It was shown that the strength characteristics of the samples produced from thermoplastics (low density polyethylene, polyamide 6, Armamid, and polyethylene terephthalate) increase as a result of short vibration treating with a frequency close to that of natural vibrations of the structural elements.     

Use of matrix-modifiers in atomic-absorption determination of chromium in argillites

The direct atomic-absorption determination of chromium in argillites, without preliminary concentration and separation, has been studied. A map of selective flame zones for determining Cr in argillites has been designed. An express method for determining Cr in Estonian argillites has been suggested.