纳米/微米碳酸钙的结构表征和热分解行为

采用棕榈酸对纳米碳酸钙进行有机表面改性, 运用SEM﹑TEM、XRD、FTIR 及TG-DTG 对表面改性前后的纳米碳酸钙进行表征, 并与微米碳酸钙的微晶结构及热分解特性进行比较. FTIR 分析结果确证了棕榈酸与纳米碳酸钙表面是以化学键合和物理吸附方式相结合, 粒子表面存在羧基等有机官能团的红外吸收特征. 对比研究发现, 碳酸钙微晶纳米化后, 其红外V3特征吸收峰出现约35 cm-1 的蓝移现象, 并且明显窄化. 初步解释了纳米碳酸钙红外吸收峰蓝移的原因, 认为尺寸效应和晶体场效应是影响纳米碳酸钙红外光谱特征的主要因素. 微晶结构的变化使得纳米碳酸钙的热分解反应表现出反常特性, 热分解温度较微米碳酸钙下降了40.6 ℃.     

基底对电沉积制备ZnO纳米棒阵列的影响

采用恒电位电沉积方法, 在未经修饰的ITO导电玻璃基底上通过控制实验条件制备出不同形貌的纳米ZnO结构, 而在经过ZnO纳米粒子膜修饰后的ITO导电玻璃基底上, 制备出透明、高取向、粒径小于30 nm的ZnO纳米棒阵列. 用扫描电子显微镜(SEM)、X射线衍射(XRD)以及透射光谱对制备出的ZnO纳米棒阵列的结构、形貌和透明性进行了表征. 测试结果表明, ZnO纳米棒阵列的平均直径为21 nm, 粒径分布窄, 约18～25 nm, 择优生长取向为[001]方向, 垂直于基底生长. 当入射光波长大于400 nm时, ZnO纳米棒阵列的透光率大于95%.     

白钨矿型钨酸盐和钼酸盐纳米晶/微晶制备研究进展

综述近年来自钨矿型钨酸盐和钼酸盐纳米晶/微晶制备技术领域的研究进展,重点介绍熔盐法、有机配合物前驱法、模板法、微乳液法、水热法、溶剂热法和微乳液.溶剂热法的原理和技术特点,比较各种方法的异同点,并提出白钨矿型钨酸盐和钼酸盐纳米晶/微晶制备技术的发展趋势.     

表面修饰二氧化锡纳米微晶的制备与表征

制备了硅烷偶联剂KH-570表面修饰的SnO2纳米微晶，通过FT-IR、XPS、TEM和TG-DTA对其结构和表面特性进行表征和研究. FT-IR和XPS分析结果确证了KH-570与SnO2表面是以化学键合或物理吸附方式相结合,粒子表面存在酯基等有机官能团的红外吸收特征；观测到KH-570中Si原子的Si2s和Si2p谱线. TEM分析表明，表面修饰反应增强了SnO2纳米微晶的疏水性和分散性.由XPS和TG的实测数据探讨了纳米粒子具有较低包覆量的可能原因.     

Pb_(1-x)La_xTi_(1-x/4)O_3纳米晶的结构

纳米材料的表面效应和尺寸效应能够使材料性质发生显著变化 .铁电纳米晶体是制备铁电纳米陶瓷和铁电复合材料的基础 ,薄膜材料亦可看作零维纳米材料在二维平面上扩展生长形成的 ,因此铁电纳米晶体结构研究具有重要意义 .对于纯ＰｂＴｉＯ3纳米晶 ,铁电 顺电相变温度随粒径减小而降低 ,并求得了室温下铁电 顺电相变消失、粒子成为顺电体的临界晶粒尺寸[1,2 ].近年来 ,有关Ｌａ改性钛酸铅 (ＰＬＴ)薄膜和纳米粉制备、结构和性质的研究引起了各国学者的重视[3～ 6 ],但对于其微观结构 ,缺乏系统的研究 .我们研究了ＰＬＴ纳米晶的结构和临界晶粒…     

尿液中纳米微晶的团聚促进泌尿系结石的形成

采用纳米粒度仪和透射电子显微镜(TEM)比较研究了尿石症患者与健康对照者尿液中纳米微晶的尺寸、粒度分布、聚集状态、自相关函数和ξ电位随放置时间的变化. 患者尿样放置3 h后, 其尿微晶平均粒径(D_a)由506 nm增至958 nm, 粒度分布范围变宽, 自相关时间由1.84 s延长到3.93 s, ξ电位由-1.34 mV降低至-3.89 mV; 而健康对照者尿微晶的D_a仅由330 nm增加至416 nm, 自相关时间由1.44 s延长至2.10 s, ξ电位由-8.35 mV降低至-8.90 mV. 此结果表明, 尿石症患者和健康对照者尿液中的纳米微晶不但在尺寸、粒度分布、聚集、自相关函数和ξ电位等方面存在明显的差异, 而且患者尿微晶的稳定性比对照者的差; 随着时间的延长, 患者尿液中的纳米微晶会逐渐团聚, 而对照者尿微晶的团聚要轻微得多. 从两类尿液中尿大分子和小分子抑制剂的浓度、尿微晶表面形成双电层的稳定性等方面进行了分析, 结果表明, 尿微晶的聚集是泌尿系结石生长的关键因素.     

水滑石基催化剂催化合成碳纳米材料的研究进展

碳纳米材料是一类推动能源存储、 多相催化、 高性能复合和生物医药等领域发展的重要材料, 可控合成碳纳米材料对相关领域的发展具有重要意义. 水滑石(LDHs)材料具有层板金属种类及含量可调等特点, 经焙烧、 还原后可制备出金属种类、 密度和粒径分布各异的高分散、 高稳定金属纳米催化剂, 可实现高效催化生长各种类型的碳纳米材料. 此外, 通过调控反应条件和反应器等, 可以影响LDHs基金属纳米催化剂催化生长的碳纳米材料的结构和性能. 本文总结了LDHs基金属纳米催化剂的可控制备、 碳纳米材料结构调控以及利用LDHs基催化剂制备的碳纳米材料的应用等方面的研究工作, 并阐明了催化剂的可控制备是控制合成碳纳米材料的核心手段, 这为利用LDHs基催化剂进一步合成更高性能碳纳米材料的研究指明了方向. 此外, 本文还结合近些年在光、 电及光热催化方面的研究进展, 展望了基于新型LDHs纳米结构生长碳纳米材料的研究前景.     

反胶束法合成氧化锌微晶及其荧光特性

0引言材料的结构(微结构)、尺寸和形貌等因素对其特性及其实际应用具有重要的影响。对无机材料特别是氧化物半导体进行结构控制的研究近年来引起了人们极大的关注。氧化锌作为一种宽带隙(3.2eV)半导体材料,可广泛应用于压电材料、气体传感器、橡胶添加剂和光学器件等领域,而且还因其在室温下可产生激射现象使其成为纳米光学材料研究领域中的一大热点[1￣6]。目前,除了传统的固相-气相(V S)反应外,用于氧化锌微晶的制备方法主要有共沉淀法[7]、多羟基化合物水解法[8]、有机金属气相沉积法[9￣12]和水热法[13]等。通过选择不同的制备方法和…     

PS/TiO2复合纳米微球的制备和结构表征

无机纳米微粒具有特殊的物理化学性能 ,近年来在摩擦学领域中受到越来越多的重视 .由于无机纳米微粒难以分散于润滑基础油中 ,故其作为润滑材料主要用作聚合物填料和润滑脂添加剂 .为了改善其在基础油中的分散性 ,需要对无机纳米微粒进行表面改性 ,制备成有机无机复合纳米微粒 ,从而使它们能够用作润滑油添加剂 .目前有机小分子表面修饰无机纳米微粒的摩擦学性能已有报导 [1－ 3],但是聚合物修饰无机纳米微粒的研究较少 ,并且大多是采用高分子（如 PVK,PVA等）直接包埋的方法 ,用这种方法制得的微粒 ,粒径差别较大,性能不太稳定 .　　本…     

普鲁士蓝纳米修饰电极的制备及表征

采用激光加热拉伸的方法制备铂纳米电极,并通过交流电刻蚀的方法制备纳米孔电极,在这两种电极上可通过电化学方法原位合成单颗普鲁士蓝微晶. 结果表明,普鲁士蓝微晶在纳米微孔电极上的机械附着强度增强. 这种方法可用于制备纳米修饰电极或研究功能微晶体材料的电化学性质.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.