兰州重离子冷却储存环工程

兰州重离子加速器冷却储存环是兰州重离子研究装置的后续工程 .它的建造目的是将重离子束的能量提高到 1 Ge V/u附近 ,同时利用储存环电子冷却技术将束流品质提高一个数量级 ,并提供更多种类的重离子束 ,以开展更广范围和更高精度的物理实验 .兰州重离子加速器冷却储存环是一个双储存环系统 ,由一个主环和一个实验环构成 .对其总体布局、总体参数、主要功能进行了介绍. HIRFL- CSR, a new accelerator project at the Heavy Ion Research Facility in Lanzhou (HIRFL), is a multipurpose Cooling Storage Ring system which consists of a main ring (CSRm) and an experimental ring (CSRe). Beams from HIRFL will be accumulated and accelerated in CSRm, and then transported to CSRe for internal target experiments. The layout, major parameters and main functions of the CSR were described.     

兰州重离子加速器冷却储存环束流累积研究

对兰州重离子加速器冷却储存环加速器主体的主要功能环——主环的束流累积方法和设计进行了研究 .为了使主环对不同种类的重离子束流都具有较强的累积能力 ,在设计时考虑采用电子冷却参与下的两种束流累积方法 :多次多圈注入和射频堆积 .对这两种方法 ,电子冷却的冷却时间都是将束流累积到高流强的关键因素. The beam accumulation methods of HIRFL CSR(Heavy Ion Research Facility of Lanzhou and Cooler Storage Rings) project were studied. Two accumulation methods will be adopted to increase the beam intensity of CSRm. For both multiple multi turn injection method and RF stacking method, electron cooling of beam plays an important role.     

CSR空间电荷效应的研究

针对兰州重离子加速器冷却储存环的流强设计 ,对其空间电荷效应进行了讨论 .随着流强增高和发射度降低 ,束流自作用场效应 (空间电荷效应 )逐渐显现 .散焦的空间电荷力造成的粒子自由振荡频移和束流包络增长 ,带来了不稳定因素 ,这些不稳定因素就限定了储存环的流强极限.Cooler Storage Ring (CSR), an upgrading program planned at the Heavy Ion Research Facility in Lanzhou (HIRFL), will supply beams with higher quality and intensity. Space charge effects should be considered due to this magnitude of intensity in CSR. The concept and some phenomena of space charge effects are discussed. Space charge intensity limit and space charge tune shift of normal CSR operation are given. It is of significance for the construction and operation of the future facility.     

冷却存储环虚拟加速器的数据交互系统

 介绍了兰州重离子加速器冷却存储环（HIRFL CSR）为重离子治癌而改造的控制系统中的数据交互系统,数据交互系统是CSR虚拟加速器的核心。该系统能实现对256个能量级的束流控制,为以后深层重离子治癌做好准备。系统主要采用Java,COM,Oracle,ARM,DSP,FPGA等技术实现了对磁铁电源的实时、同步控制,已达到对束流的控制及束流在不同能量级间的切换控制。该系统已经运行于冷却存储环主环（CSRm）的束流慢引出调试中,性能稳定,能满足物理人员的要求。     

用于浅层肿瘤重离子治疗的终端束流诊断控制系统

 设计了中国科学院近代物理研究所利用兰州重离子研究装置（HIRFL）进行浅层肿瘤临床治疗试验研究中所使用的束流诊断安全控制系统。该系统包括束流强度监测及保护、剂量测量、扫描波形监测及保护3个部分。系统基于PXI系统及LabVIEW软件,给出了该系统的各部分结构。从系统建立时的多次测试结果以及实际临床治疗试验研究时的长期运行结果来看,该束流诊断控制系统在控制辐照剂量以及安全保护方面能够满足当前重离子加速器浅层肿瘤临床治疗试验的基本要求,为试验研究的顺利进行提供了可靠的保证。     

SFC新引出系统的物理设计研究

兰州重离子加速器(HIRFL)是一个回旋加速器组合系统. 它的注入器是K=69的扇聚焦回旋加速器.在十多年运行过程中, 曾做过两次较大的改进, 使加速的束流种类及流强都有了显著的改善.但由于SFC的引出效率比较低, 只有30%左右, 一方面损失了大量束流, 另一方面许多束流损失在引出静电偏转板上, 造成了大量出气, 破坏了真空, 难以维持长期大束流运行. 文章重新对SFC引出系统进行了物理设计研究, 在真实磁场的基础上做了大量计算工作, 得到了一个新的引出 系统方案.     

IH型漂移管直线加速器的束流动力学研究（英文）

为了提高兰州重离子加速器冷却储存环（HIRFL-CSR）的运行效率、改善加速器输出束流品质,并实现几个加速装置分时供束,提高整个重离子加速装置的利用率,特为（HIRFL-CSR）增建一台新的注入器--CSRLINAC。在108.48 MHz的RFQ之后的CSR-LINAC主加速段,主要由一台108.48 MHz和两台216.96 MHz的IH型漂移管直线加速器组成,用于加速荷质比为1/8.5~1/3之间的重离子,其最大的束流流强为3 mA,并将粒子从0.3 MeV/u加速到3.71 MeV/u。运用KONUS动力学原理,在满足设计指标的情况下,首先利用TraceWin程序进行中能束线MEBT设计,后针对高频腔体设计和束流匹配的基本参数的系列讨论,特别是对CSR-LINAC的中能束流匹配线、参数选择和IH型KONUS结构的漂移管直线加速器进行设计模拟优化。最终得出,在保证腔体设计指标和95.3%的传输效率的情况下,该紧凑型直线加速结构经过三个腔体的加速后,束流的纵向归一化均方根发射度增长仅有25%;同时发现,当流强达到3 mA时,存在空间电荷效应,导致其纵向相宽增长约25%,最大横向包络也存在16.5%的涨落。In order to improve the operation efficiency of the Cooling Storage Ring of Heavy Ion Research Facility in Lanzhou (HIRFL-CSR), a heavy ion linac (linear accelerator) was proposed and designed as a new injector for HIRFL-CSR. Following the 108.48 MHz Radio-Frequency Quadrupole (RFQ), three tanks in total with Interdigital H-mode drift tube linac (IH-DTL) structure are installed to boost the beam energy from 0.3 to 3.71 MeV/u, and the beam current of ions with charge-to-mass ratio from 1/8.5 to 1/3 can reach to 3 mA. The first tank operatesat the same frequency as the RFQ, and the rest two operate at 216.96 MHz. The “Combined Zero-Degree Synchronous Particle Structure” (KONUS) beam dynamics was used in the beam dynamics design. The overview of the physics design on the main accelerating components, including RF design and beam dynamics design are introduced in this paper. The optimized structure design, fabrication status and simulation results are presented in this contribution. It shows that under the condition of assurance of 95.3% transmission efficiency, the normalized rms emittance is about 25%. When the beam current is up to 3 mA, owing to the space charge effect, the increase of longitudinal phase spread and transverse envelope are about 25% and 16.3%, respectively.     

兰州重离子加速器冷却储存环

 兰州重离子加速器冷却储存环HIRFL-CSR,是一个多用途、多功能的双冷却储存环同步加速器系统,由主环CSRm和实验环CSRe构成,并以兰州重离子级联回旋加速器HIRFL作注入器。CSR利用高频变谐波的方法,将重离子束的能量从7～25 MeV/u同步加速到２00～1 000 MeV/u,同时利用重离子储存环中空心电子束冷却技术将束流品质提高１个数量级,并通过储存环的快引出及慢引出,提供多种类的重离子束以及放射性次级束(RIBs),以开展范围更广精度更高的物理实验。该装置于2007年投入运行,已取得了重要的运行结果,如实现了剥离注入与多圈注入、空心电子束对重离子束的冷却与累积、变谐波宽能区同步加速、等时性环型谱仪、RIBs的产生收集与ToF高分辨质量测量以及高能重离子束的变能慢引出等。     

磁铁边缘场对注入束流的影响

在兰州重离子加速器冷却储存环工程(HIRFL–CSR)实验环的注入设计过程中,通过对束流在侧面边缘场作用下运动的反向数值跟踪,得到注入束流通过二极磁铁和四极透镜边缘场的传输矩阵,并同理想场对束流的作用进行了比较.通过改变注入束流中心轨道及对磁铁的重新设计,将磁铁边缘场对注入束流的影响减小到可以控制的范围.     

束流强度探测变压器

兰州重离子加速器冷却储存环工程 (HIRFL CSR)主环和实验环上带电粒子束流强度的测量和监视拟由环型束流变压器实现 .通过对各种磁芯性能的分析和比较 ,束流变压器磁芯材料最终采用环形高磁导率超微晶合金 ,可测量束流脉冲的频率范围为 0 .2 - 2MHz .选择低噪声放大器将感应信号适当放大 ,可以实现对最小流强为 1μA束流的测量. The intensity of a pulsed beam of charged particles in the Cooling Storage Ring Project of Heavy Ion Research Facility in Lanzhou (HIRFL-CSR) will be measured with a toroidal current transformer. By comparing and analyzing the properties of kinds of magnetic cores, a strip wound toroidal core is adopted, which is made of a high-permeability alloy and can measure a pulsed beam with frequency range of 0.2 to 2 MHz. The permeability of Fe-based nanocrystalline alloy varying with frequency is measured...     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.