有序介孔氧化硅膜的制备及结构研究

本文介绍了在α-Al₂O₃中空纤维载体上制备担载有序氧化硅膜的方法。应用LXRD、HRTEM、TG-DTA、SEM、氮气吸附等测试手段对膜的结构、形貌进行了表征。LXRD和HRTEM结果显示所制备的非担载膜具有高度有序的二维六方结构。SEM分析发现担载膜表面完整、无缺陷。气体渗透实验表明中空纤维担载膜具有一定的气体选择性，在0.1 MPa下对H₂/N₂和CH₄/N₂的分离因子分别为2.80和1.65，气体透过膜孔的扩散由努森机制所控制。等温氮气吸附实验显示：500 ℃热处理后非担载膜的比表面积为548.84 m²·g^-1，孔容为0.57 mL·g^-1。     

担载多孔Al_2O_3膜的制备

研究了溶胶－凝胶法在多孔陶瓷载体上制备多孔Ａｌ２Ｏ３膜的工艺条件。发现在孔直径为１．１和１．６ｕｍ的多孔陶瓷载体上必须经过多次重复浸渍干燥－焙烧过程，才能制备出担载均匀的多孔Ａｌ２Ｏ３膜。对溶胶和多孔陶瓷载体进行适当的化学改性后，能够减少浸渍－干燥－焙烧过程重复的次数。对Ａｌ２Ｏ３膜的孔径大小和透气性能进行了表征。     

担载多孔Al2O3

研究了溶胶－凝胶法在多孔陶瓷载体上制备多孔Ａｌ２Ｏ３膜的工艺条件，发现在孔直径为１．１和１．６μｍ的多孔陶瓷载体上必须经过多次重复浸渍－干燥－焙烧过程，才能制备出担载均匀的多孔Ａｌ２Ｏ３膜，对溶胶和多孔陶瓷载体进行适当的化学改性后，能够减少浸渍－干燥－焙烧过程重复的次数，对Ａｌ２Ｏ３膜的孔径大小和透气性能进行了表征。     

介孔氧化硅孔径尺寸对Eu(Ⅲ)配合物的影响

分别以十六烷基三甲基溴化铵(CTAB)和聚乙氧基-聚丙氧基-聚乙氧基三嵌段共聚物(P123)为模板剂、正硅酸乙酯(TEOS)为硅源，采用水热法合成了有序介孔分子筛MCM-41和SBA-15。选择Eu(DBM)₃phen为客体，有序介孔氧化硅MCM-41和SBA-15为载体，分别在氯仿中进行分子组装，制备出具有较强发光性能的介孔复合材料Eu(DBM)₃phen/APTES-MCM-41(EAM)和Eu(DBM)₃phen/APTES-SBA-15(EAS)。采用XRD、TEM、N₂吸附-脱附和荧光光谱等对产物的结构与性能进行了分析。结果表明，Eu(DBM)₃phen组装进有序介孔氧化硅的孔道中后，发光纯度提高。而且孔径越小，发光纯度越高。选用较大孔径的SBA-15为载体，在不显著影响发光纯度的同时，可以获得较高的发光强度。     

基于3D受限自组装构筑中空介孔氧化硅/碳复合微球

发展简单、高效、可控的方法来制备中空介孔微球是介孔材料领域的研究热点.本工作结合嵌段共聚物的三维受限自组装(3D-CSA)和自模板碳化策略,建立了一种构筑中空介孔微球的新方法 .首先,采用乳液-溶剂挥发法实现嵌段共聚物与全氟辛烷(PFO)在3D受限空间的分级组装,获得了核-壳结构微球,其中壳层由微相分离的嵌段共聚物构成.然后,在壳层的连续相选择性地复合氧化硅,既实现了无机框架的负载,又实现了对连续相聚合物链选择性交联.对复合微球进行煅烧处理后,实现了壳层连续相聚合物的选择性碳化,获得了中空介孔氧化硅/碳复合微球.本研究系统地阐述了核-壳型分级结构微球的形成机理和必备条件,研究了氧化硅前驱体添加量和嵌段共聚物分子量对中空介孔氧化硅/碳复合微球形貌的影响,为制备中空介孔微球材料提供了一种简便、可控的方法.     

中空介孔硅铝球形分子筛的制备及催化裂解性能

利用沸石前驱体溶液和介孔硅球(MSS)为原料, 通过水热法成功制备了具有中强酸性介孔壳的中空介孔硅铝球形分子筛(HMAS)。利用透射电镜(TEM)、扫描电镜(SEM)、X射线衍射(XRD)、N₂-吸脱附、²⁷Al核磁共振(²⁷Al NMR)及NH₃程序升温脱附(NH₃-TPD)对材料的结构和性能进行了表征。研究结果表明, 在MSS的中空过程中伴随有物质再分配和介孔结构的逐渐演变。MSS介孔孔道中的十六烷基三甲基溴化铵(CTAB)分子, 一方面保护MSS免遭强碱性沸石前驱体溶液的溶蚀, 另一方面作为形成HMAS介孔壳层的模板剂。在此CTAB分子的作用下, 沸石前驱体结构单元被引入到HMAS的介孔球壳上。所得材料具有介孔结构和中强酸性, 在催化裂解1, 3, 5-三异丙苯反应中表现出优异的催化性能。     

有机功能化介孔氧化硅的制备和表征

有机功能化的介孔氧化硅在催化领域、吸附分离、生物化学和电子学等领域有广泛的应用前景。本文综述了近年来有机功能化介孔氧化硅的研究进展,主要介绍了有机功能化的介孔氧化硅的制备方法、种类和表征手段,并对其未来发展前景进行了展望。有机功能化的介孔氧化硅的制备方法主要有接枝法、共缩聚法、有序介孔有机硅法和自模板法,常用的表征方法有粉末X-射线衍射分析、低温N₂吸附-脱附、透射电镜、红外光谱、热重分析、元素分析和²⁹Si、¹³C交叉极化和魔角旋转核磁共振等。     

担载多孔Al2O3膜的制备和表征

研究了溶胶—凝胶法在多孔陶瓷载体上制备多孔Al_2O_3膜的工艺条件,发现在孔径为1.1～1.6μm的多孔陶瓷载体上必须经过多次重复浸渍—干燥—焙烧过程,才能制备出担载均匀的多孔A1_2O_3膜,不过对溶胶和多孔陶瓷载体进行适当的化学改性后,能够减少重复以上过程的次数。用BET法和透气实验对Al_O_3膜的孔径大小和透气性能进行了表征。     

凝固浴温度对纤维素中空纤维膜结构及气体渗透分离性能影响研究

利用新型溶解工艺,在不同的凝固浴温度(0～60℃)下制备了纤维素中空纤维膜,考察了凝固浴温度对纤维素中空纤维膜结晶结构、机械性能和气体渗透分离性能的影响.扫描电镜表征表明凝固浴温度的升高使得纤维素中空纤维膜更加疏松,并且内侧的指状孔变大变多;膜的机械性能随凝固浴温度的升高而变差;XRD谱图显示凝固浴温度对纤维素中空纤维...     

介孔交联蒙脱土固体酸催化剂的结构与性能

采用溶胶凝胶法制备介孔钛交联蒙脱土，再采用SO₄^2-和CeO₂进行两次改性，然后以之为载体，制备铜基交联蒙脱土介孔固体酸催化剂。 催化剂的结构通过BET、XRD、TPR、Py-IR、FTIR、XPS和SEM等手段进行表征，并研究了它们在富氧条件下对丙烯选择还原NO的催化性能。结果表明，钛交联剂能很好地撑开蒙脱土的土层，形成良好的介孔结构，其孔径分布集中在3～7 nm，并且使制得的交联蒙脱土载体的比表面积明显增大；SO₄     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.