红外光谱研究Pt-Re/Al2O3重整催化剂的表面结构

CO和NO吸附或两者竞争吸附在Pt／Al2O3，Re／Al2O3和Pt－Re／Al2O3催化剂上的红外光谱可以给出Pt和Re的表面结构信息．本文研究的催化剂为低金属载量的Pt／Al2O3，Re／Al2O3和工业型Pt－Re／Al2O3，其中Pt含量0．22％，Re含量0．43％（质量分数）．实验结果表明，用NO与CO双分子竞争吸附的红外光谱实验方法可分别表征还原态Pt－Re／Al2O3重整催化剂上Pt表面和Re表面，并视需要可对Pt表面和Re表面进行半定量分析．在还原态工业型Pt－Re／Al2O3重整催化剂表面上，没有明显迹象表明有Pt－Re合金形成．     

氧化铝薄膜表面羰基钼物种的可逆再生

 通过Mo(CO)6的热分解制备了Al2O3薄膜负载的金属钼模型催化剂,并采用热脱附谱(TDS)和X射线光电子能谱(XPS)原位研究了CO在金属态Mo/Al2O3模型催化剂表面的化学吸附. 结果表明,在低温下CO可与Al2O3表面的金属钼纳米粒子发生多重配位形成类似于羰基钼的物种. CO在Mo/Al2O3模型催化剂表面的吸附导致Mo 3d XPS峰向高结合能方向位移,所生成的羰基钼物种表现为TDS谱中在240 K处有脱附峰. 负载的金属钼模型表面与体相金属钼的化学性质完全不同,表现出明显的粒子尺寸效应.     

Rh基催化剂上CO加氢制C2含氧化物的原位红外光谱研究

 用原位红外光谱考察了Rh-Mn-Li-Fe/SiO2和Rh/SiO2催化剂表面上CO的吸附态及CO加氢反应过程中吸附物种的变化. 结果表明,CO在Rh/SiO2催化剂上仅有线式吸附态存在,而CO在Rh-Mn-Li-Fe/SiO2催化剂上既有线式吸附态存在,又有孪生吸附态存在. 这说明Rh-Mn-Li-Fe/SiO2催化剂中Rh的分散度较高. 经CO加氢反应(3.0 MPa,593 K)后,在Rh-Mn-Li-Fe/SiO2催化剂上可观测到C2含氧化物前驱物种的吸收谱带,而在Rh/SiO2催化剂上未观测到相应的谱带; CO在这两种催化剂上主要以线式吸附态存在,孪生吸附态基本消失. 结合催化剂对CO加氢的催化性能,可以认为线式吸附的CO对生成C2含氧化物有贡献. Rh-Mn-Li-Fe/SiO2催化剂的高活性是由于助剂的存在削弱了其表面吸附CO的 C-O键,促进了CO的活化,从而有利于C2含氧化物前驱物的生成.     

Ni(OCH3)2/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换相结合的方法，制备了负载型单核金属甲氧基配合物Ni(OCH3)2/SiO2催化剂。利用IR、TPD、TPSR和微反技术，考察了催化剂的表面结构以及CO2、CH3OH在催化剂表面上的化学吸附和反应性能。结果表明，负载型单核金属甲氧基配合物Ni(OCH3)2/SiO2中，Ni^2 与载体SiO2表面的O^2-以双齿形式配位；在催化剂表面存在CO2的桥式吸附态和甲氧碳酸酯基物种两种吸附态，CH3OH则只有一种分子吸附态。在373-473K条件下，CO2和CH3OH在催化剂上的反应物主要是DMC、H2O以及少量的CO、CH4和CH2O，催化剂的活性由表面甲氧碳酸酯基物种与分子吸附态甲醇的反应决定的。讨论了催化剂上CO2和CH3OH的活化过程及吸附态的形成机理。     

SnO_2-SiO_2负载Cu、Ni催化剂的CO_2加氢反应性能

采用表面反应改性法制备了SnO2 SiO2 (SnSiO)表面复合物载体 ,用等体积浸渍法制备了SnSiO担载的Cu Ni双金属催化剂。借助BET、XRD、TPR、IR和微反等技术研究了SnSiO及其负载的Ni、Cu双金属催化剂的表面构造、化学吸附及CO2 加氢反应性能。结果表明 :SnSiO是SnO2 单分子层价联于SiO2 表面的复合氧化物 ,仍保持类似SiO2载体的孔结构和比表面 ;SnO2 引入SiO2 表面后可以有效地促进CuO、NiO的还原 ,还原后成为负载在SnSiO载体表面的Cu Ni合金 ;CO2 在负载型Cu Ni合金表面Cu或表面Ni位上发生化学吸附 ,形成线式和剪式吸附态 ;CO2 在催化剂上的加氢反应产物主要是CH3 OH、CH4 、CO和H2 O ,生成CH3 OH的选择性与催化剂组成及反应条件密切相关。Cu Ni催化剂 ,在 0 5MPa ,170℃ ,H2 /CO2 (mol/mol)为 3的条件下 ,CH3 OH的选择性达到 84 6 %。     

费托合成:SiO_2和Al_2O_3负载的Co_2C催化剂的表征和评价

采用CO碳化SiO2和Al3O4负载的Co(NO3)2的方法制备了SiO2和Al3O4负载的Co2C催化剂,采用N2物理吸附、X射线衍射和H2-程序升温还原技术对催化剂进行了表征,并用于催化费托合成反应中.结果显示,需要较长碳化时间才可合成负载的Co2C催化剂;所制催化剂表现出CO加氢生成高碳醇的催化性能,其原因可能在于催化剂表面存在的金属Co物种使CO解离,表面Co物种有利于CO插入,从而导致醇的生成,但体相Co2C则不具有催化活性.     

类水滑石Mg3Al1-xFex负载Ir催化剂在肉桂醛加氢反应中的应用:Fe的促进作用

水滑石类化合物 (LDH) 的层板金属阳离子组成具有可调变性,通过将具有变价特性的过渡金属定量引入 LDH 层板,经热处理后可以得到具有高比表面积和层板金属原子级分散的混合金属氧化物,后者可广泛用作催化剂载体.如三元Mg-Al-Fe 类水滑石材料在光催化、H2S 选择性氧化和乙苯脱氢等反应中表现出较好的活性.Ir 催化剂在α,β-不饱和醛加氢反应中具有较好的活性,Fe 修饰 Ir 催化剂可提高不饱和醇选择性,但有关 Fe 的作用以及 Fe 与活性组分 Ir 间的相互作用本质还不是很清楚.本文以类水滑石材料 Mg3Al1–xFex为载体,采用等体积浸渍法制备了 Ir 催化剂,并用于肉桂醛加氢反应,通过考察 Fe的加入对 Ir 电子和几何结构的影响揭示了 Fe 的加入对活性和选择性的影响规律.结果表明,当 x 从 0 (Ir/Mg3Al) 增加到 1 (Ir/Mg3Fe) 时,肉桂醛加氢的反应速率在 x = 0.25 时达到最大值,肉桂醇选择性从 44.9% 增加到 80.3%,且不随肉桂醛转化率的增加而改变.透射电镜结果表明,Ir 纳米粒子的粒径随着 x 的增加未发生明显变化,均为 1.7±0.2 nm.H2程序升温还原结果发现 Ir 可以促进 Fe3+的还原且两者之间存在相互作用.X射线光电子能谱结果表明,Fe 的掺杂没有改变催化剂表面Ir0和 Ir4+含量的比值,但当 Fe 含量增加时,Fe2+2p3/2向高结合能方向偏移,且 Ir04f7/2向低结合能方向偏移,说明电子从 Fe2+转移到 Ir,形成了富电子的 Ir 物种和缺电子的 Fe 物种.富电子的 Ir 物种有利于肉桂醛分子中的 C=O 键在其表面吸附,并且和 Ir 相邻的 Fen+物种可以作为亲电位点吸附肉桂醛分子中氧,从而极化和活化 C=O 键,因而催化剂活性和选择性增大.采用吸附 CO 红外光谱表征了催化剂表面的几何结构,2058–2069 cm-1处出现了 CO 吸附峰,归属于 Ir0表面 CO 的线性吸附,高波数 2069 cm-1的吸附峰归属于 CO 在高配位 Ir 位点 (平台) 的吸附,低波数 2058 cm-1的吸附峰归属于 CO 在低配位Ir 位点 (台阶、角、楞) 的吸附.随着 Fe 含量的增加,CO 吸附峰蓝移 11 cm-1,表明 Fe 的加入改变了催化剂表面 Ir 的几何结构,低配位 Ir 位点减少,高配位 Ir 位点增多.高配位 Ir 位点 (平台) 有利于肉桂醛分子中 C=O 键的吸附,从而提高了肉桂醇的选择性.总之,Fe 的加入虽然没有明显改变 Ir 纳米粒子的粒径,但却改变了其电子和几何结构,从而提高了催化剂活性和选择性.     

CO_2在Cu-Ni/ZrO_2-SiO_2催化剂上的吸附与反应

采用表面反应改性法 ,制备了 Zr O2 - Si O2 (Zr Si O)表面复合物 ;用等体积浸渍法制备了 Zr Si O担载的 Cu-Ni双金属催化剂 .用 IR和 TPD技术 ,研究了 CO2 在其表面上的化学吸附与反应性能 .实验结果表明 ,在 Cu- Ni/Zr Si O催化剂上 CO2 可形成线式吸附态、剪式吸附态和卧式吸附态 ;催化剂表面金属位 M上的剪式吸附态 CO2可与邻近的 lewis酸位 Zrn+作用 ,形成 CO2 卧式吸附态 M- (CO) - O Zr4+ ;该卧式吸附态在一定温度(142℃ )下可解离为 M- CO和 Zr- O- .Zr- O- 具有良好的选择氧化性能     

金属-载体相互作用对CH4/CO2重整反应中Rh基催化剂抗积炭性能的影响

考察了Rh/Al2O3,Rh/SiO2和Rh/CeO2催化剂上金属-载体间相互作用对CH4/CO2重整反应抗积炭性能的影响,并与反应前后催化剂的程序升温还原和程序升温氧化(TPO)测试结果相关联.实验发现,Rh与Al2O3和SiO2载体间的相互作用越强,催化剂还原后Rh的分散度越高,晶粒越小,高分散的Rh表面生成的碳物种CHx越多,其作为活泼的反应中间体越易与CO2反应生成CO和H2.而游离态的Rh还原后晶粒较大,生成的碳物种与CO2反应能力较低,从而导致催化剂失活.TPO和CO2脉冲实验结果表明,反应过程中Rh/CeO2催化剂上反应生成的CHx物种比Rh/Al2O3和Rh/SiO2上的CHx物种更活泼.同时由于Rh-CeO2间独特的相互作用,部分CeO2还原后生成CeO2-x和氧空位,促进CO2分子的活化解离,导致生成的表面氧容易与CHx反应,从而抑制催化剂积炭.     

富氧条件下Co/ZSM-5催化剂对C_3H_8选择还原NO_x的性能

采用多种物理化学手段研究了在模拟的轻型柴油车尾气中不同Co担载量及Cu掺杂的Co/ZSM-5催化剂的Co组分分散状态、可还原性、NO吸附脱附性质对C3H8选择性催化还原NOx性能的影响。结果表明,浸渍法制备的Co/ZSM-5催化剂上既有外表面上的Co3+和Co2+物种,也有孔内的Co2+离子。富氧条件下Co/ZSM-5催化剂上C3H8选择性催化还原NOx的活性主要与ZSM-5载体孔外表面分散的CoOx物种中的钴离子可还原能力和NO吸附脱附性能密切相关。Co/ZSM-5催化剂上适宜的Co担载量约为4.0wt%,低担载量时随Co担载量增加,表面CoOx物种中钴离子可还原能力增强,C3H8选择性催化还原NOx的低温转化活性增加;高担载量时,随Co担载量增加,单位Co离子的NO吸附量的减少以及催化剂表面活性中心数的减少,导致了Co/ZSM-5催化剂NOx的转化率和催化剂比速率(k)的下降。孔外表面Co3O4晶体的存在使催化剂表面产生较强的NO吸附,并在高温时有利于C3H8的氧化燃烧,使C3H8选择性催化还原NOx的活性降低。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.