基于苯并吲哚的荧光探针对Al3+的识别及应用

设计合成了一种结构简单且基于苯并吲哚衍生物的荧光探针(H),通过紫外-可见吸收光谱(UV-Vis)和荧光发射光谱研究了荧光探针H对金属阳离子的识别性能。 结果表明,在乙醇(EtOH)和4-羟乙基哌嗪乙磺酸(HEPES)缓冲液(pH=7.4) (体积比为1:1)的混合溶液体系中,荧光探针H对Al³⁺有专一性识别且不受其它金属阳离子干扰。 探针H与Al³⁺的配合比为1:1,配合常数K_a为0.52×10² mol/L,检测限为1.75 μmol/L。 探针通过荧光发射光谱对水样及食品中的Al³⁺进行了定量检测,具有一定实际应用价值。     

新型杯[4]芳烃氨基苯酚类衍生物的合成及对La3 的选择性识别

设计合成了下缘连有氨基苯氧基结构的杯[4]芳烃衍生物:5,11,17,23-四叔丁基-25-[2-(2-氨基苯氧基)乙氧基]-27-(2-羟基乙氧基)-26,28-二羟基杯[4]芳烃(化合物C),增加了与阳离子的结合位点,有利于通过配位作用对金属离子进行识别。化合物C的结构通过红外光谱、1H NMR、13C NMR和质谱进行了表征。通过紫外可见光谱和荧光发射光谱对化合物C与24种金属阳离子的络合作用进行了研究,结果发现,其对La3+有特殊的识别作用,化合物C与La3+的络合比为1∶1。     

两种磺酰胺类化合物的合成及其对Fe3+的氧化-还原荧光“开-关”性质

合成了两种磺酰胺类化合物, 并研究了其荧光性能. 通过它们对金属阳离子的选择性识别实验, 发现其在乙醇水溶液中均对Fe3+有专一性的识别作用, 并在NH2OH·HCl和H2O2的存在下, 两种化合物对Fe3+都具有氧化-还原荧光“开-关”作用.     

2-羟基-1-萘甲醛缩-2-萘甲酰腙对Zn2+的选择性识别

设计合成了识别Zn²⁺的荧光传感分子--2-羟基-1-萘甲醛缩-2-萘甲酰腙(3)。 通过红外光谱、核磁共振谱和质谱测试技术表征了其结构。 利用其光谱性质研究了该物质对几种过渡金属离子的识别性质,初步探讨了其结合模式。 结果表明,在乙腈介质中,受体分子3表现出对Zn²⁺良好的选择性,Zn²⁺的加入导致受体分子3的吸收光谱在435 nm处出现1新峰,其吸光度逐渐增强,同时于239、302、330、342和387 nm处观察到5个清晰的等吸收点;在516 nm处荧光增强101倍,而其它过渡金属只引起受体分子]3的荧光略微增强。 Job法实验揭示受体分子3与Zn²⁺的结合比为1∶1。     

9,10-二硫代蒽衍生物的合成及其对Cu2+的识别研究

以对氯苯乙酮为原料合成了两种9,10-二硫代蒽衍生物A、B,其结构经IR和1H NMR表征。通过紫外吸收光谱法考察了这两种化合物对金属阳离子的识别性能,结果表明,化合物A对Cu2+具有高选择性识别能力。初步讨论了主客体识别作用的机制,说明在主客体识别中分子尺寸的匹配和化合物中基团的空间合理排布是化合物A和Cu2+间能发生相互作用的重要根据。     

脲基杯[4]二(9-冠-3)对钠-卤素离子对的识别作用

采用Oniom方法(B3LYP/LANL2DZ∶PM3)对脲基取代的二(9-冠-3)杯[4]芳烃衍生物(H)与离子对Na+X-(X=F-,Cl-,Br-)的包合作用进行了理论研究.在上述体系中存在2种包合方式:一是阴、阳离子在包合物中是分离的,阴离子与主体分子的上沿主要以N—H…X-氢键作用;二是阴、阳离子在包合物中存在明显的离子配对作用,阴离子主要以阳离子的配对作用存在.通过对包合物Na+X-/H的结构参数、自然键轨道(NBO)以及结合能分析可知,第1种包合方式更有利.研究表明脲基取代的二(9-冠-3)杯[4]芳烃衍生物可成为有效的离子对识别受体,研究结果进一步加深了杯芳烃类受体对离子对识别机理的认识,为实验上设计合成新型离子对受体提供了理论依据.     

N-芳基香豆素甲基酮缩氨基硫脲对Cu2+的选择性比色识别

设计合成了2种新型N-芳基香豆素甲基酮缩氨基硫脲受体分子S1和S2, 利用紫外-可见(UV-Vis)吸收光谱考察了其对Fe3+, Hg2+, Ag+, Ca2+, Cu2+, Zn2+, Pb2+, Cd2+, Ni2+, Cr3+和Mg2+等阳离子的识别作用. 结果表明, 当加入Cu2+时, 溶液颜色立刻由无色变为黄色, 而加入其它阳离子则无变化, 从而实现了对Cu2+的裸眼检测, 具有专一选择性比色识别效果. 通过计算可知, 受体分子S2对Cu2+的络合常数大于S1, 且主客体间形成1: 1的配合物. 受体分子S2对Cu2+的检出限为2.0×10-7 mol/L, 稳定常数Ks=1.02×105 L/mol. 另外, 在EDTA存在时, 配合物可以释放出Cu2+, 与EDTA结合, 表现出对Cu2+的"off-on"模式.     

Cr3+比色荧光探针的合成及细胞成像应用

以2,3,3-三甲基-3H-苯并[e]吲哚和对二甲氨基苯甲醛为原料, 乙醇作溶剂, 在酸性催化条件下, 通过一步反应合成了比色荧光探针B. 在EtOH/HEPES(pH=7.4)体积比为9∶1的混合体系中, 向探针B溶液中加入Cr ³⁺后, 溶液颜色由淡黄色变为紫红色, 说明探针B可以对Cr ³⁺进行裸眼识别. 紫外-可见吸收光谱和荧光发射光谱分析表明, 探针B对Cr ³⁺的选择性好、 灵敏度高且对EDTA有良好的接力识别. 探针B对Cr ³⁺的结合常数K_a=0.28×10 ² mol/L, 检出限为1.90×10 ^-8 mol/L, 该检出限低于世界卫生组织(WHO)规定的饮用水中Cr ³⁺的最大含量(9.60×10 ^-8 mol/L). 利用荧光发射光谱对实际水样中Cr ³⁺的浓度进行了定量检测. 探针B也可应用于对活细胞中Cr ³⁺的检测, 具有较好的应用前景和实用价值.     

烯醇-酮互变异构型亚胺衍生物对Co2+的高选择性识别

设计合成了新型烯醇-酮互变异构型亚胺衍生物R, 考察了受体R对18种阳离子的紫外光谱及裸眼识别性能. 结果表明, 该受体对Co²⁺, Fe²⁺和Ni²⁺表现出良好的紫外光谱识别能力, 且可实现对Co²⁺相对明显的裸眼单一识别. Job曲线表明, 受体R与Co²⁺形成了1:1型金属配合物, 且检出限可达4.14×10^-7 mol/L. 制备了受体R裸眼比色识别试纸; 根据理论计算及核磁滴定实验结果阐述了Co²⁺离子识别过程中烯醇-酮互变异构机理.     

1-丁基-3-甲基咪唑醋酸盐和水组成的混合电解液中三价铬电沉积铬的研究

本文在[BMIM]OAc-H₂O电解液中研究了Cr³⁺的电沉积反应. 经循环伏安研究表明,Cr³⁺的还原属于受扩散控制的分步还原过程, 即Cr³⁺ + e →Cr²⁺和Cr²⁺ + 2e → Cr⁰. 在40℃下通过Rendle-Sevcik方程计算得到Cr³⁺的扩散系数为1.2×10^-8 cm²/s. 采用计时电流法探讨了Cr的三维瞬时成核机理. 对沉积的铬镀层进行了XRD、SEM表征, 结果表明经600℃氩气保护下煅烧后的镀层由Cr和Cr₂O₃纳米球状颗粒聚集而成, 其平均粒径为0.48μm. 对40℃,-3.0V条件下所得镀层进行EDX检测,发现Cr与O的能级峰十分明显,其中Cr的质量分数为83.8%. 通过在[BMIM]OAc、[BMIM]BF₄和[BMIM]PF₆三种离子液体体系中电镀得到的Cr镀层质量的比较, 表明OAc-的确有利于Cr的电沉积.     

化“材”为“筑”

Chemistry is a central, practical and creative discipline. The development of chemistry plays an important role in the progress of science and society, as well as the improvement of the quality of human life. This paper introduces the chemical knowledge of stone, concrete, glass and other inorganic nonmetallic building materials by the anthropomorphically story. Taking nanomaterials as an example, the prospect of building materials development in the future is put forward.     

"Alpha"-, "beta"- and "delta"-anhydrodigitoxigenin

The syntheses of 3β-hydroxy-5β-carda-14, 20:22-dienolide (= «β»-anhydro-), 3β-hydroxy-5β-carda-8:14, 20:22-dienolide (= «α»-anhydro-) and «δ»-anhydro-digitoxigenin (= probably 3β-hydroxy-5β, 14β-carda-8, 20:22-dienolide) by the best ways known to date, have been described. «δ»-Anhydro-digitoxigenin represents the thermodynamically most stable isomer. In this isomer the double bond in position 8 is unaffected by hydrogenation with Pt in acetic acid; with perbenzoic acid an epoxide results from which, on hydrogenation, the double bond can be regenerated in its original position. Analogous reactions are known to occur in the 8:14-epoxides.     

Making "wheels" and "cubes" from triangles

[Mn(IV)Mn(II)3] triangular units directed by the presence of tripodal alcohols self-assemble in the presence of azide and acetate ligands to form either a [Mn24] "wheel" or a [Mn32] "cube".     

"Turn-on" fluorescent sensing with "reactive" probes

Chemical probes are valuable tools for the investigation of biochemical processes, diagnosis of disease markers, detection of hazardous compounds, and other purposes. Therefore, the development of chemical probes continues to grow through various approaches with different disciplines and design strategies. Fluorescent probes have received much attention because they are sensitive and easy-to-operate, in general. To realize desired selectivity toward a given analyte, the recognition site of a fluorescent probe is designed in such a way to maximize the binding interactions, usually through weak molecular forces such as hydrogen bonding, toward the analyte over other competing ones. In addition to such a supramolecular approach, the development of fluorescent probes that sense analytes through chemical reactions has witnessed its usefulness for achieving high selectivity, in many cases, superior to that obtainable by the supramolecular approach. Creative incorporations of the reactive groups to latent fluorophores have provided novel chemical probes for various analytes. In this feature article, we overview the recent progress in the development of turn-on fluorescent probes that are operating through chemical reactions triggered by target analytes. Various chemical reactions have been implemented in the development of many reactive probes with very high selectivity and sensitivity toward target analytes. A major emphasis has been focused on the type of chemical reactions utilized, with the hope that further explorations can be made with new chemical reactions to develop reactive probes useful for various applications.     

"Clickable" polymersomes

Polymersomes, composed of amphiphilic polystyrene-block-poly(acrylic acid) (PS-b-PAA), with the periphery being covered with azide groups, were used for further functionalization using "click" chemistry.     

"Decoking" of a "coked" zeolite catalyst in a glow discharge

'Decoking' of a 'coked' zeolite catalyst in a glow discharge in oxygen is investigated. The 'decoking' process involves reactions of atomic oxygen (O atoms) with 'coke' and yields gases such as CO, CO₂ as well as other gaseous products that could be easily pumped out.Three different modes of discharge were investigated including a static mode, a flowing-gas mode, and a periodic-purge mode where the oxygen and other gaseous products of the discharge were replaced by fresh O₂ gas after short but regular intervals of time. In some cases, additional heating was also used to provide base temperatures of the order of 100 °C to facilitate penetration of oxygen atoms into the inner layers and cages of the zeolite catalyst.This paper presents some results of spectroscopic analytical techniques used to monitor the atomization of oxygen, oxidation of 'coke', and to confirm the process of 'decoking'. More specifically, radiation emission on the 3 s ⁵S– 3p ⁵P transitions of O around 777.2–777.5 nm were selected for monitoring the atomization of O₂. On the other hand, X-ray photo-electron spectroscopy (XPS) was used to determine the amount of residual carbon and extent of 'decoking'. Furthermore, evolution of CO and CO₂ gases as a function of time was systematically monitored in real time. For CO, the 451.1 nm band head belonging to the B¹ - A¹ bands of the Angstrom system of the CO spectrum was used, while for CO₂, the band head at 353.4 nm belonging to the CO₂⁺ spectrum was used. The rates of evolution of CO and CO₂ were related to the rate of 'decoking' of the catalyst. It is noted that in the periodic-purge mode, about 63% of the total yield of CO from a given sample of the catalyst appears in the first 3-min exposure to discharge whereas it takes up to 15 min to remove nearly 94% of the removable carbon under our experimental conditions.