卟啉化合物的研究(ⅩⅩ)——5-(p-十六烷氧基苯基)-10,15,20-三苯基卟啉和5-(p-十六羰酰氧苯基)-10,15,20-三苯基卟啉的合成及光电性质的研究

在卟啉的苯环上接上4～30个碳的长链,则其光电化学性能增强,并成为性能良好的充电导膜材料及照相感光材料。为此,本文合成了5-(p-十六烷氧基苯基)-10,15,20-三苯基卟啉(Ⅱ)和5-(p-十六羰酰氧苯基)-10,15,20-三苯基卟啉(Ⅲ),合成路线如下:     

具有不同取代链长的卟啉衍生物LB膜的结构研究

本文研究了三种羧酸取代的四苯基卟啉衍生物在空气/Cd^2^+水溶液界面上所形成的单层膜及LB膜。这三种卟啉衍生物中, 一种没有脂链, 另外两种具有不同长度的脂链。由π-A等温线得到的平均表观分子面积相差很大。紫外-可见光谱表明, LB膜中卟啉的Soret吸收带相对于溶液的吸收均红移, 但红移程度不同。LB膜的偏振紫外-可见光谱表明, LB膜中三种卟啉衍生物的卟啉环具有基本一致的取向。运用亚相降低法得到了三种卟啉衍生物单层LB膜, 其紫外-可见光谱与用垂直提拉法得到的LB膜的紫外-可见光谱具有一致的特征。这些结果表明: 卟啉衍生物有无取代链及取代链长的不同对平均表观分子面积的大小和膜中环间的距离有影响, 但对环的取向没有影响。环的取向由环本身及环上的亲水取代基来确定。气/液界面上三种卟啉衍生物的单层膜中环也具有一致的取向, 且与LB膜中环的取向相差不大。提拉不会对膜中环的取向及膜的结构造成大的改变。     

含不同链长的三个卟啉LB膜修饰电极的光电响应研究

利用LB (Langmuir-Blodgett)技术将含不同链长的卟啉化合物(C4Py, C6Py和C8Py)单层膜转移到ITO (indium-tin oxide)导电玻璃上, 发现其具有良好的光电转换性质. 卟啉化合物修饰后的紫外吸收光谱与光电流工作谱重叠, 表明卟啉化合物起到了敏化光电流产生的效果; 而且电子给体、电子受体和偏压对其敏化效果的实验结果表明: 光诱导电子转移是产生光电响应的主要原因. 而且, 这三个卟啉化合物的光电响应性质与碳链长度相关, 其中含有六个碳链的C6Py表现出最佳的光电转化效果.     

带侧基配体的新型卟啉衍生物的合成

由四[4-(羟基)苯基]卟啉出发,合成了三种带吡啶侧基的新型卟啉衍生物--四[4-(烟酸酰氧基)苯基]卟啉,四[4-(异烟酸酰氧基)苯基]卟啉和四[4-(烟酸酰氧基丙氧基)苯基]卟啉,其结构经UV, 1H NMR, IR和MS表征.     

苯并卟啉羟基和醚类衍生物的简便合成

以原卟啉IX二甲酯(1)为起始原料,简便地合成了四种位置异构体苯并卟啉羟基及醚类衍生物:3-甲氧乙基苯并卟啉衍生物16,3-羟乙基苯并卟啉衍生物17,8-甲氧乙基苯并卟啉衍生物20和8-羟乙基苯并卟啉衍生物21。     

2-烷基-苯并咪唑在硝酸银亚相上的Langmuir膜及LB膜

对不同链长的2-烷基-苯并咪唑衍生物（BzCn,烷基链长从C5到C15）在硝酸银亚相上的成膜行为及形成的LB膜的结构进行了研究.表面压－面积曲线的结果表明，短链(C5～C9)的2-烷基-苯并咪唑可在银离子亚相上形成稳定的单分子膜，而长链(C13和C15)衍生物则形成多层膜.利用LB技术可将上述Langmuir膜转移到固体基板上形成LB膜，其吸收光谱的结果说明了苯并咪唑和银离子配位.利用AFM、XRD及FT-IR等技术研究了烷基链长对LB膜结构的影响.实验结果表明,除了BzC15，其余的衍生物都可形成规整的层状结构.短链衍生物的单层LB膜具有均一、平整的形貌；而对于BzC15，观察到多层结构.     

含四-苯基卟啉基团聚酰亚胺膜的光电导性能研究

分剐以均苯四酸二酐(PMDA)与四(4-氨基苯基)卟啉(TAPP)／4，4′-二苯醚(ODA)、TAPP／3，6-二氨基-N-甲基咔唑(DACz)聚合得到两个系列含四-苯基卟啉基团(TPP)聚酰亚胺(PI)共聚膜，并时其作为载流子发生层(CGL)制成的感光体的光电导性能进行了测试。结果表明：PI共聚膜的光电导性能随分子链中TPP基团含量的提高而增强；当TPP基团含量相同时，PMDA／TAPP／ODA系列的光电导性能较PMDA／TAPP／DACz系列好；含TPP基团PI共聚膜的光电导性能明显优于四-苯基卟啉分子掺杂体系；在CGL与导电铝基间引入聚甲基丙烯酸甲酯(PMMA)阻挡层(CBL)不能提高感光体的光电导性能。从光电导机理分析了TPP基团、四-苯基卟啉分子的聚集结构与PI膜光电导性能的关系。     

5,10,15,20-四-(4-N,N,N-二甲基十六烷基氨基苯基)卟啉LB膜结构的研究

研究了两亲性卟啉5,10,15,20-四-(4-N,N,N-二甲基十六烷基氨基苯基)卟啉(TDMC₁₆PP)在气/液界面上的成膜性能,制备了其多层LB膜。用UV-Vis吸收光谱、荧光光谱、偏振UV-Vis吸收光谱和小角X射线衍射对LB膜进行了测试表征。结果表明:两亲性卟啉TDMC₁₆PP具有良好的成膜性能,其LB膜性质稳定,有较好的结构均匀性和周期性。在LB膜内,脂肪链并不是直立的,卟啉大环平面与基片平面成42.5°排列。     

非水溶性卟啉在分析中的应用(Ⅱ)——α,β,γ,δ-四-(4-氯苯基)卟啉与镉反应的分光光度法研究

用卟啉衍生物光度法测定镉的研究已有报导。我们采用α,β,γ,δ-四-(4-氯苯基)卟啉[简称T(4-Cl)PP]在适当掩蔽剂存在下直接测定水样中的微量镉,结果令人满意。 (一)主要试剂及仪器     

杯芳烃-卟啉化合物及其金属配合物的Langmuir-Blodgett膜研究

通过对杯芳烃-卟啉化合物及其锌、钯配合物LB膜的表面压-表面积等温线、紫外可见光谱和傅里叶变换红外光谱的检测,研究了它们在气/液界面和Langmuir-Blodgett膜中的性质,并用量子力学方法优化了杯芳烃-卟啉化合物的构型.结果表明,成膜时3种化合物分子中卟啉环都倾斜地排列在亚相表面,且卟啉环间存在π-π相互作用.连接杯芳烃和卟啉之间的碳氢链在膜性质中起着重要的作用,杯芳烃-卟啉化合物分子中这种碳氢链的有序性小于其锌、钯配合物分子中的这种碳氢链有序性.     

Spectroscopic and optical characterization of porphyrin chromophores incorporated into ultrathin polyimide films

Polyamic acid (PAA) containing free-base porphyrin and zinc(II) porphyrin chromophores was synthesized by copolymerization of diphenylether-type tetracarboxylic dianhydride and diamines. The monolayer of the alkylamine salts of PAA (PAASs) at the air/water interface was deposited on solid substrates by the Langmuir-Blodgett (LB) technique. The PAAS LB films thus obtained were converted to polyimide (PI) LB films by chemical treatment. The fluorescence of porphyrin moieties in the PI LB film was observed, because of the weak electron-accepting properties of the diphenylether unit. Therefore, the photophysically important processes, such as photoinduced electron transfer, excitation energy transfer, and excitation energy migration could be investigated in relation to the layered nanostructures of the ultrathin PI films. The fluorescence spectrum suggested that the aggregation of porphyrin moieties in the PI LB films was effectively prevented by the use of polymeric films. The surface plasmon (SP) measurement showed that the thickness of the monolayers was 0.9-1.0 nm for PAAS films and 0.32-0.40 nm on average for PI LB films. The absorption dichroism of the Soret band of porphyrin indicated that porphyrin moieties in the PAAS and PI LB films are oriented in parallel with the substrate. These results showed that the orientation and the spatial distribution of porphyrin units can be efficiently regulated in the PI LB films in a nanometer dimension.     

Monolayers as models for supported catalysts: zirconium phosphonate films containing manganese(III) porphyrins

Organized monolayer films of a manganese tetraphenylporphyrin have been prepared and used as supported oxidation catalysts. Manganese 5,10,15,20-tetrakis(tetrafluorophenyl-4'-octadecyloxyphosphonic acid) porphyrin (1) has been immobilized as a monolayer film by a combination of Langmuir-Blodgett (LB) and self-assembled monolayer techniques that use zirconium phosphonate linkages to bind the molecule to the surface. Analysis by FTIR, XPS, UV-vis and polarized optical spectroscopy show that the films consist of noninteracting molecules effectively anchored and oriented nearly parallel to the surface. The monolayer films are stable to the solvent and temperature conditions needed to explore organic oxidations. The activity of films of 1 toward the epoxidation of cyclooctene using iodosylbenzene as the oxidant was compared to that of Manganese 5,10,15,20-tetrakis(pentafluorophenyl) porphyrin (2) and 1 under equivalent homogeneous conditions. The immobilized porphyrin 1 shows an enhanced activity relative to either homogeneous reaction. The main difference between 1 and 2 is the four alkyl phosphonate arms in 1 designed to incorporate the porphyrin within the films. The increased activity of immobilized 1 is a combination of the porphyrin structure, which prohibits the formation of mu-oxo dimers even in solution, and a change in conformation when anchored to the surface. The study demonstrates that careful monolayer studies can provide useful models for the design and study of supported molecular catalyst systems.     

Mixed thin films of a cationic amphiphilic porphyrin and n-alkanes

Langmuir and Langmuir-Blodgett (LB) films of a cationic amphiphilic porphyrin mixed with n-alkanes octadecane and hexatriacontane were prepared and characterized, to examine the influence of the alkanes on film structure and stability. While the structure present in these films was controlled primarily by the porphyrin, the addition of the alkanes resulted in significant changes to both the phase behavior of the Langmuir films and the molecular arrangement of the LB films. These changes, as well as the observed chain length effects, are explained in terms of the intermolecular interactions present in the films.     

Self-organization of a sulfonamido-porphyrin in Langmuir monolayers and Langmuir-Blodgett films

Langmuir monolayers (LM) and Langmuir-Blodgett (LB) films of pure lipophilic meso-tetra(4-dodecylaminosulfophenyl)porphyrin (PC12) and mixed with the anionic surfactant sodium hexadecylsulfate (SHS) were studied. The molecular packing and structure of PC12 and PC12-4SHS with variable surface pressure were investigated by surface pressure-area measurements, steady-state absorption, fluorescence emission and anisotropy, as well as by fluorescence lifetime imaging microscopy (FLIM). At low surface pressure, the porphyrin molecules are organized with the rings tilted on the water surface whereas at high surface pressure the porphyrin rings achieve a more perpendicular arrangement. Using the FLIM images a gradual change of aggregates into large "islands" is observed. Different patterns are observed in the pure PC12 multilayer films (n = 3 and 5) with ordered patches superimposed which are not observed in the PC12-4SHS multilayer LB films.     

Molecular organization and electrochemical reduction of a Ni(II)Porphyrin complex in LB films

In this work, mixed films of a tetra-cationic porphyrin, Ni(II)TMPyP, and an anionic phospholipid, DMPA, in molar ratio of 1:4, were formed at the air–water interface and transferred onto glass and optically transparent indium tin oxide (ITO) electrodes. Transmission spectroscopy (on glass and ITO) and cyclic voltammetry (on ITO) were used to infer the molecular organization and the electrochemical reduction of these LB films. Likewise, we compare the electrochemical reduction of the Ni(II)TMPyP in water solution with that in LB films. The porphyrin molecules in water solution show three two-electron reduction waves, which are related to the two-electron reduction of the central ring of the porphyrin and to the one-electron reductions of the four methyl–pyridyl groups of the molecule, respectively, while only two reversible one-electron reduction waves are observed in LB films corresponding to the reduction of the central ring of the porphyrin and to the Ni(II) to Ni(I) reduction, respectively.     

Optical and Electronic Properties of Different Kinds of Water‐Soluble Porphyrin Films

Water‐soluble porphyrin‐porphyrin and porphyrin‐CdSe nanoparticle monolayer films were self‐assembled on different substrates. The influence of substrates, types of films, and heat treatment temperature on fluorescence of different kinds of porphyrin films was investigated. The SEM images showed the formation of monolayer films on porous alumina foil. The films assembled on porous alumina foil possessed higher fluorescence intensity and thermal stability. The result of conductance measurement indicated that the interaction of trimethylamidophenylporphyrin iodide (TAPPI) molecules with hydroxyl groups on porous alumina foil was weakened after CdSe nanoparticles assembled with TAPPI.     

Preparation and characterization of 5,10,15,20‐tetraphenylporphyrin Langmuir films for gas chemsensor applications

In this work is reported the preparation and characterization of 5,10,15,20‐tetraphenylporphyrin (H₂TPP) films at the water‐air interfaces. The surface pressure‐area isotherms (π‐A) and UV‐Vis spectroscopy were used to investigate the effect of the spreading methods and parameters on the porphyrin monolayer formation. Also, Langmuir‐Blodgett (LB) and Langmuir‐Schaefer (LS) films were deposited onto glass substrates in order to study the conformation changes in porphyrin molecular packing. Quartz crystal microbalance (QCM) was utilized as the active solid substrate for the development of the NO₂ gas sensor based on the H₂TPP molecular films. The results of π‐A curves have clearly shown the significant contribution of the preparation methods and processing parameters on the conformation of porphyrin molecular films. The UV‐Vis spectroscopy results using polarized absorption dichroism have indicated different molecular packing for porphyrin films deposited by LB and LS methods, with relative tilted angles of 50° ± 5° and 35° ± 5°, respectively. Moreover, the QCM response has given strong evidence that H₂TPP porphyrin molecular films have performed as NO₂ chemsensor. Copyright © 2011 John Wiley & Sons, Ltd.     

Immobilization of heme complex by radiation polymerization

Transparent films containing an iron-porphyrin complex were synthesized by ⁶⁰Co γ-ray irradiation of aqueous solutions of ironporphyrin complex and a water soluble monomer such as 2-hydroxyethylmethacrylate or 1-vinyl-2-pyrrolidone. The iron(II)porphyrin complex was immobilized in the film by covalent bonding without any denaturation, under anaerobic condition or by protection of the ironporphyrin complex with carbon monoxide. After the irradiation of iron(III)porphyrin, the central iron ion was reduced spontaneously to the ferrous state. The films containing the iron(II)porphyrin adsorbed quantitatively carbon monoxide gas.     

Alkylamine sensing using langmuir-blodgett films of n-alkyl-N-phenylamide-substituted zinc porphyrins

Two porphyrin compounds, zinc(II) 5,10,15,20-tetrakis(3,5,5-trimethyl- N-phenylhexanamide)porphyrin and zinc(II) 5,10,15,20-tetrakis(2,2-dimethyl- N-phenylpropanamide)porphyrin, have been investigated as possible candidates for the detection of alkylamines. UV-visible spectroscopy has shown that their solution absorption spectra are significantly modified upon interaction with a range of organic analytes, including acetic acid, butanone, ethylacetate, hexanethiol, octanal, octanol, alkylamines, and trimethylphosphite. Large spectral changes are observed for the family of alkylamines as a result of the specific affinity between zinc and the amine moiety. Langmuir-Blodgett (LB) films of the porphyrins have been fabricated in order to assess their solid-state sensing capability toward amines. The surface pressure-area (Pi- A) isotherms reveal a clear three-phase Langmuir film behavior and show that these monolayer films may be compressed to a relatively high surface pressure ( approximately 40-50 mN m (-1)). The isotherm data alongside molecular modeling suggest a relatively flat orientation of the porphyrin rings of both compounds: that is, a mutually parallel alignment of the plane of the porphyrin ring and that of the water surface. LB films deposited at 15 mN m (-1) have been exposed to alkylamine vapor (carried by N 2). A red shift and increase in intensity of the Soret band absorbance is observed which can be reversed by flowing pure N 2 over the gently heated sample (60 degrees C) after exposure. Primary amines were expected to invoke the greatest sensing response due to (i) their larger association constants with these porphyrins compared to secondary and tertiary amines and (ii) the ease of diffusion of amines which is expected to follow the order primary > secondary > tertiary due to the steric hindrance arising from the bulky secondary and tertiary amines. However, the magnitude of the absorbance change is largest for exposure to the secondary amines, dipropylamine and dibutylamine, for both porphyrins, compared to primary and tertiary amines. This trend follows that observed when the amines were added to solutions of the porphyrins. The rate of response of the porphyrin LB films falls as the molecular weight of the diffusing alkylamine increases. Furthermore, a greater rate of response is observed for the phenylhexanamide porphyrin compared to the phenylpropanamide porphyrin due to its lower molecular density within the LB film and therefore more porous structure.     

Synthesis, electrochemistry, absorption and electro-polymerization of aniline-ethynyl metalloporphyrins

Free-base, nickel(II), zinc(II) and iron(III) mono(4-aniline-ethynyl)biphenylporphines (AEBPPs) were synthesized and their electro-polymerization reactions were studied. Electrochemical and UV-Visible experiments showed that AEBPPs were electro-polymerized onto Pt and indium tin oxide (ITO) surfaces without significantly changing their redox and spectral properties. This suggests that the pi-conjugations of these porphyrins were not greatly affected upon electro-polymerization. SEM images indicated the formation of porphyrin films on the electrode surfaces, while EDS spectra of the metallo-AEBPP films confirmed deposits of the corresponding metals. Upon closer inspection, the AFM images revealed nano-scale fine structure of these porphyrin films. Both SEM and AFM images of the porphyrin films showed similar trends of porphyrin accumulation.