BF3·OEt2作为催化剂与合成子在有机合成中的应用进展

BF₃·OEt₂作为一个催化能力非常优秀的典型路易斯酸催化剂,在催化偶联、环化和重排等方面发挥着重要的作用,广泛应用于天然产物、医药分子和其他功能分子的合成中.有趣的是,当有水存在时,BF₃·OEt₂能与水结合成为布朗斯特酸,也能够促进偶联、加成等反应的进行.同时,BF₃·OEt₂不仅仅局限于催化反应,亦可作为合成子,较温和地构建含B原子、F原子以及BF₂结构分子的化合物,在催化配体、荧光分子领域等有着重要的作用.以BF₃·OEt₂的催化反应类型和其作为合成子的应用为依据,综述了近年来其在有机合成中的应用.展望未来,人们将会对其性能与应用有更多的了解,发展出更多催化体系和合成子应用.     

HCN消除反应机理的理论研究

采用密度泛函理论方法从HCN氧化和水解两个方面研究了HCN消除反应机理,并考虑了HCN的直接消除反应(途径Ⅰ和途径Ⅱ)和CuO上的HCN消除反应(途径Ⅲ和途径Ⅳ)。途径Ⅰ为HCN与2个O2分子生成CO2、NO和H原子;途径Ⅱ为HCN与1个O2分子和1个H2O分子生成 CO2和NH3;途径Ⅲ为CuO上HNCO水解为CO2和NH3;途径Ⅳ为CuO上HCN水解为CO和NH3。研究发现,途径III速控步骤的活化自由能垒为157.32 kJ/mol,比途径Ⅱ中HNCO水解降低12.34 kJ/mol;比途径Ⅳ降低了63.8 kJ/mol。可见,HNCO是HCN净化过程中的重要中间体,CuO的加入降低了反应能垒,促进了HCN消除。     

钴分子氮络合物HCoN2(pph3)3与醛、酰氯、甲酸酯反应的研究

由于过渡金属分子氮络合物上的配位氮分子和中心金属键合得较松弛,容易解离,相当处于潜在配位不饱和状态,可以发生各种不同反应,有可能用作制备的目的。本文研究了钴的分子氮络合物HCoN₂(pph₃)₃(A)与醛、酰氯、甲酸酯的反应,得到了一些新的结果。     

在星际媒介中合成H2NCH2CN分子的理论研究

在早期地球原始化学生命起源过程中, 氨基酸是重要的必需的生物化合物, 生成肽和蛋白. 为了探究一个可能的新的氨基酸起源, 采用密度泛函理论(B3LYP)在6-311++G(d, p) 基组水平上研究了在星际媒介条件下在气相中和在模拟的冰颗粒表面上的化学反应: CH2NH分子和两个异构体分子HNC/HCN通过Strecker合成生成H2NCH2CN(氨基乙氰, 一个重要的苷氨基酸前置分子). 在研究体系中, CH2NH、HCN、HNC 和H2O分子存在于星际密集分子云中, 且早于地球广泛存在. 研究证明, 这些分子之间在星际媒介条件下和在冰颗粒表面上通过Strecker合成路线很容易生成H2NCH2CN. 所以, H2NCH2CN分子在宇宙的星际密集分子云中是广泛存在的. 还讨论了H2NCH2CN分子在新的氨基酸起源中所起的作用, 以及在通过“原始汤”生命起源理论解析早期地球生命起源中可能所起的作用.     

中心为氨基、末端为硝基的苯乙炔树枝状分子的合成

将固定相合成与“收敛/发散”方法相结合,合成了第一、二代苯乙炔树枝状分子.通过Heck-Cassar-Sonogashira-Hagihara偶联反应,将其中心和末端分别修饰上供电子的氨基和拉电子的硝基,得到第一、二代中心为氨基、末端为硝基的苯乙炔树枝状分子NH₂-G1-(NO₂)₂和NH₂-G2-(NO₂)₄.用傅里叶变换红外光谱跟踪了整个固定相合成过程.苯乙炔树枝状分子的紫外-可见吸收光谱呈现出规律性变化.     

等离子体引发CH3OH/NH3偶联反应合成腈类化合物

腈类化合物广泛用于医药和精细化学品合成。然而,许多腈类的生产过程产生大量污染物。本文采用介质阻挡放电(DBD)等离子体活化甲醇和氨气分子,发现等离子体引发的CH₃OH/NH₃偶联反应可合成二甲基氰胺、二甲基氨基乙腈和氨基乙腈等高附加值含N有机化合物。系统研究了反应器结构、放电条件、反应条件和填充材料对甲醇转化率和产物选择性的影响。实验结果表明,在最优条件下,甲醇的转化率达到51.5%,腈类化合物选择性达到22.1%。CH₃OH/NH₃等离子体发射光谱结果表明,C≡N自由基物种可能是生成腈类化合物的重要中间体。该CH₃OH/NH₃等离子体偶联反应为二甲基氰胺、二甲基氨基乙腈和氨基乙腈提供了一种绿色合成方法,也为甲醇和氨气精细化利用开辟了一种新途径。     

污泥中典型氨基酸热解生成NOx前驱体的反应机理研究

污泥热解是实现污泥减量化、无害化和资源化的重要技术.城市污泥含氮量高,在热解过程中含氮物质会转化成NO_x前驱体（NH₃,HCN）,限制了污泥热解技术的应用和推广.本研究选取污泥中氮的基本存在单元甘氨酸和谷氨酸作为污泥的含氮模型化合物,采用B3LYP方法和6-31++G（d,p）基组,探究了甘氨酸和谷氨酸热解形成NO_x前驱体的机理.结果表明,甘氨酸热解生成NO_x前驱体有2种反应方式,一是甘氨酸发生脱氨反应生成NH₃;二是甘氨酸发生脱水反应生成甘氨酸酐（DKP）.谷氨酸在热解过程中直接发生脱氨反应生成NH₃.同时发现NH₃和HCN存在竞争关系.根据生成NH₃和HCN的难易程度可知甘氨酸和谷氨酸热解得到NO_x的前驱体主要是NH₃,并根据不同氨基酸热解时的脱基团反应机理提出了加入水蒸气的建议来减轻污泥热解中氮氧化物的产生.     

HCNO分子裂解机理的理论研究

实验提示应用248 nm UV波长对HCNO分子进行直接光解, 该分子可能发生裂解, 得到某些产物. 为了揭示HCNO分子的裂解机理, 选择HCNO分子的一组相对能级作为理论研究的起始点, 即¹A' (0.00 kJ/mol), ³A' (255.01 kJ/mol), ³A" (282.37 kJ/mol)和¹A" (341.59 kJ/mol), 进而找到了合理的反应路径, 阐明了相应的裂解机理, 得到的主要产物为H＋NCO, HCN＋O和NH＋CO, 与实验提示的结果相符合.     

生物质热解过程中NO、NH3和HCN的释放特性

在氩气气氛下,利用固定床反应器对稻草（DC）、麦杆（MG）和锯末（JM）三种生物质进行热解实验,采用傅里叶变换红外光谱仪（FT-IR）在线检测热解气体产物中的含氮组分,分析各种气相含氮组分的释放规律。实验结果表明,由于锯末中木质素含量较高,锯末热解开始快速释放NO、NH₃和HCN的温度明显高于稻草和麦杆。稻草热解过程中生成的NH₃、HCN和NO量最大。低温下NH₃的生成至少部分与生物质中氨基结构的分解有关,HCN的生成温度较高。不同生物质热解过程中NO、NH₃和HCN释放特性的差异,是由生物质大分子结构不同、灰分含量及成分不同、N含量不同等决定的,以及氮在生物焦、焦油和气相间的分配差异造成的。     

共沉淀法合成Pb3Nb2O8纳米粉

在PbO-Nb₂O₅-KOH-H₂O体系中,于90℃下得到纳米级Pb₃Nb₂O₈陶瓷粉.原料来源及配比、溶液碱度及合成温度对产物物相的形成有较大影响.在Pb₃Nb₂O₈的合成中,必须以可溶性铌酸盐和醋酸铅作为反应原料,同时以KOH调节体系中铌酸盐的聚集状态.当n(Pb)/n(Nb)接近1/1,KOH浓度在1～3mol/L时,得到Pb₃Nb₂O₈纯相,当KOH浓度大于3mol/L时容易生成反应活性较低的PbO,产生杂相.     

Synthesis, characterisation and molecular structure of Re(III) 2-oxacyclocarbenes stabilised by a benzoyldiazenido ligand

A family of new Fischer-type rhenium(III) benzoyldiazenido-2-oxacyclocarbenes of formula [(ReCl2[eta1-N2C(O)Ph][=C(CH2)nCH(R)O](PPh3)2][n = 2, R = H (2), R = Me (3); n = 3, R = H (4), R = Me (5)] have been prepared by reaction of [ReCl2[eta2-N2C(Ph)O](PPh3)2] (1) with omega-alkynols, such as 3-butyn-1-ol, 4-pentyn-1-ol, 4-pentyn-2-ol, 5-hexyn-2-ol in refluxing THF. The correct formulation of the carbene derivatives 2-5 has been unambiguously determined in solution by NMR analysis and confirmed for compounds 2-4 by X-ray diffraction methods in the solid state. All complexes are octahedral with the benzoyldiazenido ligand, Re[N2C(O)Ph], adopting a "single bent" conformation. The coordination basal plane is completed by an oxacyclocarbene ligand and two chlorine atoms. Two triphenylphosphines in trans positions with respect to each other complete the octahedral geometry around rhenium. The reactivity of 1 towards different alkynes and alkenes including propargyl- and allylamine has been also studied. With propargyl amine, monosubstituted or bisubstituted complexes, [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2C triple bond CH]n(PPh3)(3-n)][n= 1 (6); n = 2 (7)], have been isolated depending on the reaction conditions. In contrast, the reaction with allylamine gave only the disubstituted complex [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2CH=CH2]2(PPh3)] (8). The molecular structure of the monosubstituted adduct has been confirmed by X-ray analysis in the solid state.     

四元体系LiNO3-Mg(NO3)2-NH4NO3-H2O相图预测及相关相变储能材料的研究

应用修正的BET热力学模型对Mg(NO3)2-NH4NO3-H2O三元体系和LiNO3-Mg(NO3)2-NH4NO3-H2O四元体系在273～320 K的相图进行预测,并找到一个相变温度较低的四元共晶点Mg(NO3)2.6H2O-LiNO3.3H2O-NH4NO3,其质量百分数组成为:25.5%的硝酸铵,28.4%的硝酸锂,13.8%的硝酸镁和32.3%的水,通过实验对共晶点组成材料的吸放热行为进行测定,发现其熔化温度为286.3 K,且DSC测试其相变热焓为192.7 J.g-1,表明该材料可用作潜在的低温相变储能材料。     

Mechanism of OH radical reactions with HCN and CH3CN: OH regeneration in the presence of O2

A theoretical study on the mechanism of the OH reactions with HCN and CH(3)CN, in the presence of O2, is presented. Optimum geometries and frequencies have been computed at BHandHLYP/6-311++G(2d,2p) level of theory for all stationary points. Energy values have been improved by single-point calculations at the above geometries using CCSD(T)/6-311++G(2d,2p). The initial attack of OH to HCN was found to lead only to the formation of the HC(OH)N adduct, while for CH(3)CN similar proportions of CH(2)CN and CH(3)C(OH)N are expected. A four-step mechanism has been proposed to explain the OH regeneration, experimentally observed for OH + CH(3)CN reaction, when carried out in the presence of O2. The mechanism steps are as follows: (1) OH addition to the C atom in the CN group, (2) O2 addition to the N atom, (3) an intramolecular H migration from OH to OO, and (4) OH elimination. This mechanism is in line with the one independently proposed by Wine et al. for HCN. The results obtained here suggest that for the OH + HCN reaction, the OH regeneration might occur even in larger extension than for OH + CH(3)CN reaction. The agreement between the calculated data and the available experimental evidence on the studied reactions seems to validate the mechanism proposed here.     

Electronic properties of hydrogen-bonded complexes of benzene(HCN)(1-4): comparison with benzene(H2O)(1-4)

The electronic properties, specifically, the dipole and quadrupole moments and the ionization energies of benzene (Bz) and hydrogen cyanide (HCN), and the respective binding energies, of complexes of Bz(HCN)(1-4), have been studied through MP2 and OVGF calculations. The results are compared with the properties of benzene-water complexes, Bz(H(2)O)(1-4), with the purpose of analyzing the electronic properties of microsolvated benzene, with respect to the strength of the CH/π and OH/π hydrogen-bond (H-bond) interactions. The linear HCN chains have the singular ability to interact with the aromatic ring, preserving the symmetry of the latter. A blue shift of the first vertical ionization energies (IEs) of benzene is observed for the linear Bz(HCN)(1-4) clusters, which increases with the length of the chain. NBO analysis indicates that the increase of the IE with the number of HCN molecules is related to a strengthening of the CH/π H-bond, driven by cooperative effects, increasing the acidity of the hydrogen cyanide H atom involved in the π H-bond. The longer HCN chains (n ≥ 3), however, can bend to form CH/N H-bonds with the Bz H atoms. These cyclic structures are found to be slightly more stable than their linear counterparts. For the nonlinear Bz(HCN)(3-4) and Bz(H(2)O)(2-4) complexes, an increase of the binding energy with the number of solvent molecules and a decrease of the IE of benzene, relative to the values for the Bz(HCN) and Bz(H(2)O) complexes, respectively, are observed. Although a strengthening of the CH/π and OH/π H-bonds, with increasing n, also takes place for the Bz(H(2)O)(2-4) and Bz(HCN)(3-4) nonlinear complexes, Bz proton donor, CH/O, and CH/N interactions are at the origin of this decrease. Thus CH/π and OH/π H-bonds lead to higher IEs of Bz, whereas the weaker CH/N and CH/O H-bond interactions have the opposite effect. The present results emphasize the importance of both aromatic XH/π (X = C, O) and CH/X (X = N, O) interactions for understanding the structure and electronic properties of Bz(HCN)(n) and Bz(H(2)O)(n) complexes.     

The unexpected desulfurization of 4-aminothiophenols

Thermolysis of 4-aminophenyl benzyl sulfide at 523 K in the hydrogen donor solvent (HDS), 9,10-dihydroanthracene (AnH2), gave 4-aminothiophenol and toluene as the predominant products of the homolytic S-C bond cleavage. Under these conditions, a portion of the 4-aminothiophenol was desulfurized to aniline with first-order kinetics and with a rate constant estimated by kinetic modeling to be 7.0x10(-6) s-1. Starting with 4-NH2C6H4SH at 523 K, it was found that sulfur loss was more efficient in the non-HDSs, anthracene and hexadecane, than in AnH2. Under similar (competitive) reaction conditions, YC6H4SHs with Y=H, 4-CN, and 3-CF3 were completely inert; with Y=4-CH3O, there was some very minor desulfurization, whereas with Y=4-N(CH3)2 and 4-N(CH3)(H), the sulfur extrusions were as fast as that for Y=4-NH2. We tentatively suggest that this apparently novel reaction is a chain process initiated by the bimolecular formation of diatomic sulfur, S2, followed by a reversible addition of ground state, triplet 3S2 to the thiol sulfur atom, 4-NH2C6H4S upward arrow(SS upward arrow)H, and insertion into the S-H bond, 4-NH2C6H4SSSH. In a cascade of reactions, aniline and S8 are formed with the chains being terminated by reaction of 4-NH2C6H4S upward arrow(SS upward arrow)H with 4-NH2C6H4SH. Such a reaction mechanism is consistent with the first-order kinetics. That this reaction is primarily observed with 4-YC6H4SH having Y=N(CH3)2, N(CH3)(H), and NH2 is attributed to the fact that these compounds can exist as zwitterions.     

主体分子六次甲基四胺与客体分子二氯化六水合钴(Ⅱ)和结晶水包结物的研究

用X射线单晶衍射分析法研究主体分子六次甲基四胺与客体分子二氯化六水合钴（Ⅱ）和结晶水包结物晶体结构。其分子式为［（CH2）6N4］2·［（Co（H2O）6］Cl2·4H2O，Mr＝59038。晶体属三斜晶系，空间群为P1。晶胞参数：3341个衍射点，其中3148个独立衍射点，2754（F0＞6σ（F0））为可观察反射点。在晶胞内，客体分子和结晶水形成氢键：，客体分子与主体分子形成氢键晶胞之间形成氢键晶胞之内和晶胞之间主体分子和客体分子以及结晶水以氢键和范德华力相联系形成稳定的晶格。     

Dawson结构α-H6P2W18O62·3(CH3)2NH·H2O的合成、表征和晶体结构

由二甲胺与H6P2W18O62·nH2O合成了电荷转移化合物α-H6P2W18O62·3(CH3)2NH·H2O.单晶结构解析结果表明晶体属单斜晶系,空间群为P21/c,晶胞参数a=1.2964(3)nm,b=1.3621(3)nm,c=4.155 9(8)nm,β=90.02(3)°,V=7.338(3)nm3,Z=4.标题化合物具有可逆光色性.热分析表明,化合物阴离子在430.5℃左右分解.     

Apical versus equatorial disposition of substituents in tetraoxyphosphoranes bearing a 1,3,2-dioxaphosphocin ring: implications on apicophilicity in trigonal bipyramidal phosphorus

New spirocyclic (amino/amido)tetraoxyphosphoranes CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P(NRR')(O(2)C(6)Cl(4)) [R = Me, R' = Ph (1), R = R' = i-Pr (2); R = R' = H (3); R = H, R' = Ph (4)] and the isothiocyanatotetraoxyphosphorane CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P(NCS)(O(2)C(6)Cl(4)) (5) have been synthesized. X-ray crystallography for these compounds reveals that -N(Me)Ph, -N(i-Pr)(2), and -NCS groups occupy an apical position whereas -NH(2) and -NHPh groups occupy an equatorial position in a trigonal bipyramidal geometry around phosphorus. These results are in contrast with the common assumption that a sterically bulky and less electronegative substituent [e.g. -N(i-Pr)(2)] should be less apicophilic than a sterically small and more electronegative substituent (e.g. -NH(2)). The possible rationalization for these results is discussed. Variable-temperature ((1)H, (31)P) NMR spectra of these compounds show some unusual features not reported before for pentacoordinate phosphorus. Probable intramolecular processes involving (i) apical-equatorial <--> equatorial-apical exchange, (ii) apical-equatorial <--> equatorial-equatorial exchange, and (iii) boat-chair <--> tub (for the eight-membered ring) interconversion as well as cessation of the P-N bond rotation have been invoked to explain the spectral features.     

Hydrogen atom transfer reactions of C2-, C4-, and C6-: bond dissociation energies of linear H-C2n- and H-C2n (n = 1, 2, 3)

The reactions of C2-, C4-, and C6- with D2O and ND3 and of C4- with CH3OH, CH4, and C2H6 have been investigated using guided ion beam tandem mass spectrometry. Hydrogen (or deuterium) atom transfer is the major product channel for each of the reactions. The reaction threshold energies for collisional activation are reported. Several of the reactions exhibit threshold energies in excess of the reaction endothermicity. Potential energy calculations using density functional theory show energy barriers for some of the reactions. Dynamic restrictions related to multiple wells along the reaction path may also contribute to elevated threshold energies. The results indicate that the reactions with D2O have the smallest excess threshold energies, which may therefore be used to derive lower limits on the C-H bond dissociation energies of the C2nH- and C2nH (n = 1-3) linear species. The experimental lower limits for the bond dissociation energies of the neutral radicals to linear products are D0(C2-H) >or= 460 +/- 15 kJ/mol, D0(C4-H) >or= 427 +/- 12 kJ/mol, and D0(C6-H) >or= 405 +/- 11 kJ/mol.     

The reaction of tetrakis(dimethylamido)titanium with self-assembled alkyltrichlorosilane monolayers possessing -OH, -NH2, and -CH3 terminal groups

The reactions of tetrakis(dimethylamido)titanium, Ti[N(CH(3))(2)](4), with alkyltrichlorosilane self-assembled monolayers (SAMs) terminated by -OH, -NH(2), and -CH(3) groups have been investigated with X-ray photoelectron spectroscopy (XPS). For comparison, a chemically oxidized Si surface, which serves as the starting point for formation of the SAMs, has also been investigated. In this work, we examined the kinetics of adsorption, the spatial extent, and stoichiometry of the reaction. Chemically oxidized Si has been found to be the most reactive surface examined here, followed by the -OH, -NH(2), and -CH(3) terminated SAMs, in that order. On all surfaces, the reaction of Ti[N(CH(3))(2)](4) was relatively facile, as evidenced by a rather weak dependence of the initial reaction probability on substrate temperature (T(s) = -50 to 110 degrees C), and adsorption could be described by first-order Langmuirian kinetics. The use of angle-resolved XPS demonstrated clearly that the anomalous reactivity of the -CH(3) terminated SAM could be attributed to reaction of Ti[N(CH(3))(2)](4) at the SAM/SiO(2) interface. Reaction on the -NH(2) terminated SAM proved to be the "cleanest", where essentially all of the reactivity could be associated with the terminal amine group. In this case, we found that approximately one Ti[N(CH(3))(2)](4) adsorbed per two SAM molecules. On all surfaces, there was significant loss of the N(CH(3))(2) ligand, particularly at high substrate temperatures, T(s) = 110 degrees C. These results show for the first time that it is possible to attach a transition metal coordination complex from the vapor phase to a surface with an appropriately functionalized self-assembled monolayer.