共查询到20条相似文献,搜索用时 187 毫秒
1.
可控自由基聚合与其它聚合方法结合,可以制备多种类型的嵌段共聚物,因此得到了广泛关注。本文着重介绍可控自由基聚合与离子开环聚合、阴离子聚合、烯类单体的阳离子聚合及其它活性聚合方法结合制备嵌段共聚物的研究现状和进展。 相似文献
2.
3.
丙烯腈可控/"活性"自由基聚合研究进展 总被引:4,自引:0,他引:4
可控/"活性"自由基聚合能有效控制聚合物的分子量及其分布,并且能调控其微观拓扑结构。聚丙烯腈及其共聚物具有良好的成纤成膜性能,是一类应用十分广泛的聚合物。本文综述了可控/"活性"自由基聚合法合成聚丙烯腈及其共聚物的研究现状与进展,从氮氧自由基法(NMP)、引发转移终止剂法(iniferter)、原子转移自由基聚合(ATRP)和可逆加成-断裂链转移(RAFT)聚合等方面对丙烯腈均聚物和共聚物的合成研究作了全面的总结,提出了存在的问题,并且对今后的研究方向作了展望。 相似文献
4.
对聚烯烃分子链结构和组成的精确控制可赋予聚烯烃新的性质和用途。近年来,聚亚甲基(聚乙烯类似物)及其共聚物的研究成为聚烯烃功能化领域的研究热点之一。本文首先简单介绍了分子量分布窄且分子量可调控的聚亚甲基合成方法——叶立德同源聚合;接着对用于同源聚合的硼烷引发剂和叶立德单体进行了详细介绍;然后重点评述利用叶立德同源聚合与开环聚合、原子转移自由基聚合、可逆加成-断裂链转移聚合、氮氧自由基调控聚合、离子聚合、开环易位聚合和各种偶联反应等相结合的组合策略;最后,对基于聚亚甲基的新型共聚物的可控合成方法及其实际应用进行了展望。 相似文献
5.
引发转移终止剂技术合成含有聚异戊二烯链段的三嵌段共聚物 总被引:4,自引:2,他引:2
含聚异戊二烯 (PIP)链段的嵌段共聚物有着广泛的应用[1~ 3 ] ,有关它的合成、性能表征及应用方面的研究一直是学术及工业界的研究热点 .传统上 ,含有PIP链段的嵌段共聚物用活性负离子聚合的方法来合成 ,例如 :聚苯乙烯 聚异戊二烯嵌段共聚物[3 ,4 ] .这是由聚合物增长链端的特殊活性所决定的 ,采用活性负离子聚合方法 ,不但能很好地控制共聚物的分子量和分子量分布 ,而且能控制共聚物中各组分的比例 .但是 ,负离子聚合通常需在较苛刻的条件下进行 ,如低温高真空、高纯度的单体和溶剂 ,而且能用于负离子聚合的单体也有限 .相对而言 ,… 相似文献
6.
可逆加成-断裂链转移(reversible addition-fragmentation chain transfer,RAFT)聚合是一种新型的活性/可控自由基聚合方法,在制备窄分子量聚合物和设计聚合物分子结构方面具有独特的优势。本文首先介绍RAFT活性自由基聚合的机理、体系、特点及链转移(RAFT)试剂的选择,然后总结了近年来国内外利用RAFT聚合技术在设计无规和交替共聚物方面的应用,详细介绍了该方法在制备特殊结构共聚物,如嵌段、梯度、接枝、星形、树形和梳形结构聚合物的新应用,并对RAFT聚合技术在今后的研究重点和应用前景做了展望。 相似文献
7.
8.
9.
10.
结构精确的含氟嵌段共聚物具有优异而独特的化学和物理性能,有广阔的应用前景,因此受到广泛的关注.含氟嵌段共聚物可分为两类,一类是侧基含氟嵌段共聚物,另一类是主链含氟嵌段共聚物.活性聚合为嵌段共聚物的合成提供了最为重要的方法,利用它可以合成结构精确、分子量可控、分子量分布窄的嵌段共聚物.根据单体的反应特性选择不同的聚合方法,可以得到不同的含氟嵌段共聚物.本文主要综述了近几年利用各种活性聚合方法合成结构精确的含氟嵌段共聚物方面的进展. 相似文献
11.
Catherine S. H. Chen Franz Wenger 《Journal of polymer science. Part A, Polymer chemistry》1971,9(1):33-49
Homopolymerization and copolymerization of trioxane by use of various catalysts have been investigated. When MoO2(AcAc)2 is employed, crystalline homopolymers and copolymers as formed from polymerization exhibit significantly higher melting points than corresponding polymers prepared by use of ordinary cationic catalysts. The higher melting points are attributed to different morphology of the polymer chains formed during polymerization. We now call this phenomenon morphospecific polymerization. This communication describes our results in the copolymerization of trioxane and 1,3-dioxolane and some outstanding properties of the copolymers. A polymerization mechanism is also proposed. 相似文献
12.
13.
Susumu Iwabuchi Takayuki Nakahira Akira Inohana Hideki Uchida Kuniharu Kojima 《Journal of polymer science. Part A, Polymer chemistry》1983,21(7):1877-1884
The polymerization and copolymerization of 4-vinylcatechols, such as 2-(0-methyl)-4-vinylcatechol (I), 3,4-dimethoxystyrene (II), and 3,4-methylenedioxystyrene (III), were investigated in cyclohexanone at 30°C, using tri-n-butylborane as an initiator. The reactions yielded vinyl polymers and copolymers. The copolymerization parameters of I–III were determined; their Q and e values were found to be similar to those of styrene and vinylhydroquinone. The copolymerization of I–III gave copolymers of a highly alternating character. The thermal stability of the polymers and copolymers so obtained was also studied. The redox potentials of hydroloyzed poly(I) were examined; the reverse “polymer effect” was observed. 相似文献
14.
15.
Rolf C. Schulz 《Macromolecular Symposia》1993,73(1):103-115
In the first part the ring-opening polymerization of some macrocyclic ether-acetals is briefly described. Of special interest are acetal polymers with functional groups, for instance C=C-double bonds. Appropriate unsaturated monomers and their polymerizability are discussed. The second part deals with the polymerization of oxazolines, substituted in 2- and/or 4-position. Branched polymers are obtained by copolymerization of 2-ethyl-2-oxazoline with 2-hexyl-2-oxazoline or 2-undecyl-2-oxazoline. The properties of the random copolymers and corresponding block copolymers are compared. By a “mixed mechanism technique” a block copolymer composed of a poly(tert -butyl methacrylate) block and a poly(phenyloxazoline) block was prepared. A new initiator system for the polymerization of oxazolines using alkyl chloroformates is introduced. The chloroformate of a trifunctional alcohol led to a three-arm star polymer. Telechelics with two chloroformate endgroups form ABA type block copolymers. Finally four chiral oxazolines are described and the influence of substitution in dioxolanes and oxazolines on the polymerizability is discussed. 相似文献
16.
含对甲氧基苯氧羰基偶氮苯基团的侧链液晶高分子的合成与表征 总被引:3,自引:0,他引:3
报道了新型的含对甲氧基苯氧羰基偶氮苯基团的甲基丙烯酸酯单体与含对甲氧基苯氧羰基苯基团的甲基丙烯酸酯单体的合成及其自由基共聚合.利用1H NMR、IR、UV Vis、元素分析、GPC、TG DTA、POM及X 射线衍射等手段对偶氮单体及聚合物的结构与性能进行了表征,证明两种单体的共聚合产物为无规共聚物,而且各聚合物均具有较好的热稳定性.研究结果还表明,偶氮单体与聚合物在升温过程中均显示出向列相液晶织构,且聚合物的液晶相范围随偶氮含量的增加而变宽. 相似文献
17.
L. A. Rishina Y. V. Kissin S. S. Lalayan V. G. Krasheninnikov E. O. Perepelitsina T. I. Medintseva 《Polymer Science Series B》2016,58(2):152-162
The polymerization of ethylene and propylene and the copolymerization of ethylene and hexene-1 with a Ti(O-iso-Pr)4–AlR2Cl/MgBu2 catalyst system have been studied. The advantages of this system over metallocene and postmetallocene catalysts are high activity, low cost, and ease of synthesis. The resulting polymers and copolymers are characterized by a broad molecular-mass distribution, which reflects the heterogeneity of the active sites with respect to kinetic parameters. As a consequence, the ethylene/hexene-1 copolymers exhibit compositional heterogeneity. The active sites of the system produce copolymers with a pronounced tendency toward alternation of monomer units. The propylene polymerization product is mostly amorphous atactic polypropylene. 相似文献
18.
合成了2种聚合前驱体邻苯二丙烯酸酯(o-PDA)和2-甲氧基苯丙烯酸酯(2-MOPA), 分别通过与丙烯酸(AA)自由基共聚得到邻苯二丙烯酸酯-丙烯酸共聚物(O1)和2-甲氧基苯丙烯酸酯-丙烯酸共聚物(O2). 产物邻苯二酚(o-DHB)-O1(质量比1∶1)和1-羟基-2-甲氧基苯(HMOB)-O2(质量比1∶1)分别在乙腈/二氯甲烷-三氟化硼乙醚体系中直接阳极氧化聚合获得交联网状共聚物P1和P2. P1和P2均可溶于DMSO, 而难溶于ACN, DCM和THF等有机溶剂. 通过UV-Vis, FTIR和 1H NMR对交联共聚物膜的结构进行了表征. AA的引入不仅可以增加链的柔韧性, 而且提高了共聚物的力学性能. 而o-DHB/ HMOB的引入极大地减弱了单体的聚合位阻, 实现了单体的二次聚合, 同时也增强了单体及聚合物的电化学活性. 荧光光谱显示, 得到的2种交联共聚物膜分别在415和487 nm处有较强的发射峰, 表明共聚物仍具有良好的蓝色发光性能, 且聚丙烯酸结构的引入并没有对聚邻苯二酚(Po-DHB)和聚(1-羟基-2-甲氧基苯)(PHMOB)产生较大的荧光猝灭作用. 热重分析曲线(TGA)表明2种交联共聚物膜均具有较高的热稳定性. 相似文献
19.
Tsutomu Yokozawa Jun Takagi Takeshi Endo 《Journal of polymer science. Part A, Polymer chemistry》1989,27(1):291-299
Spontaneous copolymerization of cyclic ketene acetal, 2-methylene-4-phenyl-1,3-dioxolane ( I ) with common electrophilic vinyl monomers, such as methyl α-cyanoacrylate (MCA), acrylonitrile (AN), and methyl methacrylate (MMA) were investigated to further explore zwitterion polymerization method with cyclic ketene acetals. In the reaction of I with MCA and AN, spontaneous copolymerization took place at ambient temperature. The copolymers of I with MCA gave low molecular weight polymers, but copolymers obtained with I and AN were high molecular weight polymers. In the reaction of I and MMA, high molecular weight copolymer was obtained only at temperatures above 80°C. Thus, obtained polymers were not the alternating copolymers and possessed high I content in all the cases. From the above results, macrozwitterionic mechanism was suggested as discussed. 相似文献
20.
Jürgen Suhm Johannes Heinemann Christof Wrner Philipp Müller Florian Stricker Jrg Kressler Jun Okuda Rolf Mülhaupt 《Macromolecular Symposia》1998,129(1):1-28
Recent advances in transition metal catalyzed olefin polymerization and melt processing stimulate the production of new polymers derived from old monomers. Modern polyolefin processes do not require polymer purification and give excellent control of molecular and supermolecular polyolefin architectures. Progress in catalyst design and preparation of tailor-made homo-and copolymers is highlighted for isotactic, syndiotactic, atactic and stereo-block polypropylene (PP), novel 1-olefin copolymers, and ethylene copolymers with polar monomers, e.g., CO and acrylics. Today polyethylene short-and long-chain-branching is controlled either by uniform ethylene copolymerization with 1-olefins using single-site” metallocene catalysts, or by migratory polyinsertion of ethylene, respectively. Stiff cycloaliphatic polymers expand the frontiers of polyolefins into engineering applications. New families of polyethylenes and EPM with pendent polypropylene chains are obtained via copolymerization of PP macromonomers or polymer-analoguous coupling of functionalized PP during melt processing. 相似文献